![┠ḟ
1. Code_Saturne⎔ቃᵓ⠏䛾☜ㄆ
2. CAELinux䛻䛴䛔䛶
3. Code_Saturne䛾ᴫせㄝ᫂
4. [₇⩦1]ᖹ⾜ᖹᯈ㛫ὶ䜜䛾ゎᯒ
1. Salome䛻䜘䜛᱁Ꮚ⏕ᡂ
2. Code_Saturne
Wizard䛻䜘䜛ィ⟬ᐇ⾜
3. Gnuplot䛻䜘䜛ィ⟬䛾☜ㄆ
4. Salome䛻䜘䜛ྍど
5. [₇⩦2]⦰ᑠ⟶ෆὶ䛾ゎᯒ
1. Salome䛻䜘䜛᱁Ꮚ⏕ᡂ
2. Code_Saturne
Wizard䛻䜘䜛ィ⟬ᐇ⾜
㻞](data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7)
Recommended
More Related Content
What's hot
What's hot (20)
Viewers also liked
Viewers also liked (20)
Similar to Code_Saturne流体解析入門講習会 講習会資料
Similar to Code_Saturne流体解析入門講習会 講習会資料 (20)
Recently uploaded
Recently uploaded (20)
Code_Saturne流体解析入門講習会 講習会資料
- 1. Code_Saturneὶయゎᯒධ㛛ㅮ⩦ T. (䜸䞊䝥䞁CAEຮᙉ@㛵す) 2014ᖺ11᭶1᪥@䝣䞊䝝㜰 㻝
- 2. ┠ḟ 1. Code_Saturne⎔ቃᵓ⠏䛾☜ㄆ 2. CAELinux䛻䛴䛔䛶 3. Code_Saturne䛾ᴫせㄝ᫂ 4. [₇⩦1]ᖹ⾜ᖹᯈ㛫ὶ䜜䛾ゎᯒ 1. Salome䛻䜘䜛᱁Ꮚ⏕ᡂ 2. Code_Saturne Wizard䛻䜘䜛ィ⟬ᐇ⾜ 3. Gnuplot䛻䜘䜛ィ⟬䛾☜ㄆ 4. Salome䛻䜘䜛ྍど 5. [₇⩦2]⦰ᑠ⟶ෆὶ䛾ゎᯒ 1. Salome䛻䜘䜛᱁Ꮚ⏕ᡂ 2. Code_Saturne Wizard䛻䜘䜛ィ⟬ᐇ⾜ 㻞
- 3. 1-‐1. Code_Saturne⎔ቃᵓ⠏䛾☜ㄆ • ௬䝕䝇䜽䝖䝑䝥⎔ቃ+CAELinux2013䛾᪉ – ௬䝕䝇䜽䝖䝑䝥⎔ቃ→CAELinux2013䛾㡰䛻㉳ື䛧䚸䝻䜾䜲䞁䛧䛶䛟䛰 䛥䛔䚹 • ⮬๓䛾Linux⎔ቃ䛾᪉ – Linux䜢㉳ື䛧䛶䝻䜾䜲䞁䛧䛶䛟䛰䛥䛔䚹 • ᮏㅮ⩦㈨ᩱ䛻㛵䛩䜛⯡ⓗ䛺ὀព㡯䠖 – ㈨ᩱ䛿CAELinux2013䚸Salome_Meca 2013 (Salome 6.6)䚸 Code_Saturne 3.0䚸Paraview 3.10䜢䝧䞊䝇䛻䛧䛶సᡂ䛧䛶䛔䜎䛩䚹 – Version㐪䛔䛻䜘䜛᧯సᡭ㡰䛾㐪䛔䛿䛶䝣䜷䝻䞊䛷䛝䜎䛫䜣䛾䛷䚸 䛺䜛䜉䛟䛤⮬㌟䛷ゎỴ䛧䛶䛟䛰䛥䛔䚹 㻟
- 4. 1-‐2. Salome-‐Meca䛾㉳ື䛸⤊ ㉳ື ⤊ 㻠
- 5. 1-‐3 Code_Saturne Wizard䛾㉳ື䛸⤊ ㉳ື ⤊ 㻡
- 6. 2. CAE Linux䛻䛴䛔䛶 • Linuxୖ䛷ື䛟CAE䜸䞊䝥䞁䝋䞊䝇䝋䝣䝖䜴䜵䜰䜢䝥䝸䜲䞁䝇䝖䞊 䝹䛧䛯⤫ྜ⎔ቃ䚹 • 㠀Ⴀ䝪䝷䞁䝔䜱䜰䛻䜘䛳䛶㐠Ⴀ䛥䜜䛶䛔䜛䚹 • ᭱᪂∧䛿CAELinux 2013 (2014ᖺ10᭶⌧ᅾ) • 㘓䝋䝣䝖䜴䜵䜰 – CAD/CAM: FreeCAD, PyCAM, Cura – Salome – Code_Aster – Code_Saturne – OpenFOAM – Elmer 䛺䛹䚹 㻢
- 7. 2-‐1. Code_Saturne䛾ᴫせ • 䝣䝷䞁䝇䛾㟁ຊ♫EDF䛻䜘䛳䛶㛤Ⓨ䛥䜜䛯䜸䞊䝥䞁䝋䞊䝇 䛾ὶయゎᯒ䝋䝣䝖䜴䜵䜰䚹 • ᑐ㇟䛸䛩䜛ὶ䜜ሙ䛿௨ୗ䛾䛸䛚䜚䚹 – ᐃᖖ/㠀ᐃᖖὶ䜜 – ᒙὶ/ὶ (RANS䚸LES) – 㠀ᅽ⦰ᛶ/ᙅᅽ⦰ᛶὶ䜜 – ➼ /㠀➼ ὶ䜜 – 䝇䜹䝷䞊㍺㏦ὶ䜜 – ⇞↝ – ㍽ᑕ – 䝷䜾䝷䝆䜰䞁⢏Ꮚ㏣㊧ – ᨺ㟁ὶ䜜 – Ẽὶ䜜 – ᅇ㌿ᶵჾෆὶ䜜 㻣
- 8. • 䝋䞊䝇䝁䞊䝗䛿 Fortran 䛷᭩䛛䜜䛶䛔䜛䚹 • 㞳ᩓᡭἲ䛿᭷㝈య✚ἲ䚹 • ୪ิィ⟬䛻ᑐᛂ䚹 • ᢅ䛘䜛䝯䝑䝅䝳ᙧᘧ䛿䚸 – SALOME SMES – IDEAS Nx – Gmsh – Gambit (Fluent) – Simail – Harpoon – ICEM-‐CFD – Star-‐CCM+ • 㐃ᡂゎᯒ䛿௨ୗ䛾䜒䛾䛜䛷䛝䜛䚹 – Code_Aster䛸㐃ᡂ䛧䛯ὶయ-‐ᵓ㐀㐃ᡂゎᯒ(FSI) – SYRTHES䛸㐃ᡂ䛧䛯ᅛయ-‐ὶయ㐃ᡂఏ⇕ゎᯒ(Conjugate Heat Transfer) 㻤
- 9. Code_Saturne䜢⏝䛔䛯ὶయゎᯒ䛾ᡭ㡰 ၟ⏝䝯䝑䝅䝱䞊 Code_Saturne • 䝯䝑䝅䝳䝕䞊䝍䛾ㄞ䜏㎸䜏 • ≀ᛶ್䚸ቃ⏺᮲௳䚸ゎᯒ᮲௳䛾タᐃ • ィ⟬ᐇ⾜ Salome-‐Meca • ゎᯒ⤖ᯝ䛾ㄞ䜏㎸䜏 • ⤖ᯝ䛾ྍど(䝧䜽䝖䝹䚸䝁䞁䝍䞊) 䝣䝸䞊䛾 䝯䝑䝅䝱䞊 Salome-‐Meca • CAD䝰䝕䝹䛾ྲྀ䜚㎸䜏 • సᡂ䛧䛯䝰䝕䝹䛛䜙䛾䝯䝑䝅䝳⏕ᡂ • ቃ⏺䜾䝹䞊䝥䛾సᡂ ၟ⏝ྍど 䝋䝣䝖 Paraview 㻥
- 10. Code_Saturne䛾䝣䜯䜲䝹䛸䝕䜱䝺䜽䝖䝸 • Salome-‐Meca䛷䛾సᴗ䝣䜯䜲䝹 – Jobname.hdf: 䝕䞊䝍䝧䞊䝇䝣䜯䜲䝹䚸䝰䝕䝹䚸᭷㝈せ⣲䝰 䝕䝹䚸ቃ⏺᮲௳䚸ゎᯒ᮲௳䛺䛹ゎᯒᑐ⛠䛻㛵䛩䜛ሗ䜢 䛶ྵ䜐䚹䝉䞊䝤᧯స䜢䛧䛺䛔䛸సᡂ䛥䜜䛺䛔䛾䛷ὀព䚹 – Jobname.med: ᭷㝈せ⣲䝰䝕䝹䚸ቃ⏺タᐃ䜾䝹䞊䝥䛺䛹 䛾䝕䞊䝍䛜ྵ䜎䜜䜛䚹Code_Saturne䛷ㄞ䜏㎸䜎䛫䜛䝣䜯䜲 䝹䚹 㻝㻜
- 11. Code_Saturne䛾䝣䜯䜲䝹䛸䝕䜱䝺䜽䝖䝸 • Code_Saturne䛷䛾సᴗ䝕䜱䝺䜽䝖䝸 Studyname Casename MESH POST DATA RESU SCRIPTS SRC REFERENCE date-‐me check_mesh REFERENCE EXAMPLE checkpoint monitoring postprocessing 㻝㻝
- 12. Code_Saturne䛷䛾సᴗ䝣䜯䜲䝹 䝕䜱䝺䜽䝖䝸ྡ 䝣䜯䜲䝹ྡ䞉䝃䝤 䝕䜱䝺䜽䝖䝸ྡ ෆᐜ MESH Jobname.med Salome䛷సᡂ䛥䜜䛯ゎᯒ⏝᭷㝈せ⣲䝰 䝕䝹䚹 DATA Casename.xml Code_Saturne䛷సᡂ䛥䜜䛯䝕䞊䝍䝣䜯䜲䝹䚹 SaturneGUI Code_Saturne GUI䛾㉳ື䚹 REFERENCE ゎᯒ᮲௳䛾✀䚻䛾ධຊ䝣䜯䜲䝹䛺䛹䛜᱁ ⣡䛥䜜䜛䚹 RESU date-‐eme ゎᯒ⤊ᚋ䛾⤖ᯝฟຊ䝕䜱䝺䜽䝖䝸䚹 check_mesh Code_Saturne䝥䝸䝥䝻䝉䝇䛾ฟຊ䝻䜾䛜 ᱁⣡䛥䜜䜛䚹 SCRIPTS runcase ゎᯒᐇ⾜⏝䛾䝣䜯䜲䝹䚹 SCR REFERENCE 䝴䞊䝄䞊䝃䝤䝹䞊䝏䞁䛜᱁⣡䛥䜜䜛䚹 㻝㻞
- 13. 4. [₇⩦1] ᖹ⾜ᖹᯈ㛫ὶ䜜䛾ゎᯒ Dimension Value Length Width Height 0.1 m 0.001 m 0.005 m Table 1 ᙧ≧ᑍἲ Fig. 1 ゎᯒ䝰䝕䝹 Boundary Condieon Inlet ὶ㏿ Outlet Wall 0.05 m/s, 20䉝 Ẽ㛤ᨺ (0Ẽᅽ) no-‐slip (ὶ㏿0), 50䉝 Table 2 ቃ⏺᮲௳ 㻝㻟
- 14. Property Symbol Value Density (ᐦᗘ) ρ Viscosity (⢓ᗘ) μ Kinemaec viscosity (ື⢓ᗘ) ν Specific heat (ẚ⇕) Cp Heat conducevity (⇕ఏᑟ⋡) λ 998.2 kg/m3 100.2 x 10-‐5 Pa·∙s 1.004 x 10-‐6 m2/s 4181.8 J/(kg·∙K) 0.6 W/(m·∙K) Table 3 Ỉ (20䉝) 䛾≀ᛶ್ 䝺䜲䝜䝹䝈ᩘ䛿䚸 Re = Ud/n = 0.05 x (0.005/2) / 1.004x10-‐6 = 124.5 䛷䛒䜛䛾䛷䚸ὶ䜜䛿ᒙὶ䛷䛒䜛䚹 䝯䝑䝅䝳䛿┤➼㛫᱁Ꮚ䛸䛧䚸᱁ᏊⅬᩘ䛿㻌Nx = 250䚸Ny = 50䚸 Nz = 1䛸䛩䜛䚹z᪉ྥ䛿ᑐ⛠㠃(Symmetry)䛻タᐃ䛩䜛䚹 㻝㻠
- 15. 4-‐1. Salome䛻䜘䜛᱁Ꮚ⏕ᡂ (1) Salome䜢㉳ື䛧䚸䝰䝆䝳䞊䝹䜢 “Geometry”䛻ኚ᭦䛧䚸䝰䝕 䝹䜢సᡂ (2) “Acevate module”䛜ฟ䛶䛝䛯䜙䚸 “New”䜢㑅ᢥ䚹 㻝㻡
- 16. (3) “New Enety”→ “primieves” → “Box”䜢䜽䝸䝑䜽䛧䚸䝰䝕 䝹䛾እᚄ䜢సᡂ䚹 (4) “Box Construceon”䛜ฟ䛶 䛝䛯䜙䚸2␒┠䛾㡯┠䛻 䝏䜵䝑䜽䜢ධ䜜䚸Dx: 0.1䚸Dy: 0.05䚸Dz: 0.001䜢ධຊ䛧䚸 “Apply and Close”䜢䜽䝸䝑䜽 䛩䜛䚹 㻝㻢
- 18. (6) “New Enety” → “Group” → “Create”䜢㑅ᢥ䛧䚸ቃ⏺᮲௳⏝ 䛾䜾䝹䞊䝥䜢タᐃ䛩䜛䚹 㻝㻤
- 19. (7) “Create Group”䛜⌧䜜䛯䜙3␒┠䛾㡯┠䛻䝏䜵䝑䜽䜢ධ䜜䚸 “Name”䛻 Inlet 䜢ධຊ䛧䚸 “Main Shape”䛻 Box_1 䜢Object Browser䛛䜙㑅ᢥ䛧䚸䜾䝷䝣䜱䝑䜽䜴䜱䞁䝗䜴(viewer)䛛䜙ὶධ 㠃䜢㑅ᢥ䛩䜛䚹 㻝㻥
- 20. (8) “Add”䜢㑅ᢥ䛩䜛䛸 “3”䛜⾲♧䛥䜜䚸 “Apply”䜢䜽䝸䝑䜽䛩䜛䚹 㻞㻜
- 21. (9) ᡭ㡰(7,8)䛸ྠᵝ䛻䛧䛶䚸 ὶฟ㠃䠖 Outlet (13) ቨ㠃(ୗ㠃): Wall1 (23) ቨ㠃(ୖ㠃): Wall2 (27) ᑐ⛠㠃(z0): Sym1 (33) ᑐ⛠㠃(z=0): Sym2 (31) 䜢Ⓩ㘓䛩䜛䚹 (10) “View” → “Display Mode” → “Shading”䛷䝰䝕䝹䜢䝅䜵䞊 䝕䜱䞁䜾⾲♧䛩䜛䚹 㻞㻝
- 22. (11) Object Browser䜘䜚 “Inlet” 䜢䜽䝸䝑䜽䛩䜛䛸䚸ὶධ㠃(Inlet) 䛜ⓑ䛟䝝䜲䝷䜲䝖䛥䜜䜛䚹䛭䛾䛾ቃ⏺㠃䛻䛴䛔䛶䜒䜽䝸䝑䜽 䛧䛶㓄⨨䜢☜䛛䜑䜛䚹 㻞㻞
- 23. (12) 䝯䝑䝅䝳సᡂ⏝䛾䜾䝹䞊䝥䜢タᐃ䛩䜛䚹 “New Enety” → “Group” → “Create” 䜢䜽䝸䝑䜽䛩䜛䚹 㻞㻟
- 24. (13) 2␒┠䛾䜶䝑䝆䛻䝏䜵䝑䜽䜢ධ䜜䚸 “Name”䛻 Comp1䚸 “Main Shape” 䛻 Box_1 䜢㑅ᢥ䛧䚸viewer䛛䜙䝰䝕䝹䛾z᪉ྥ 䛾䜶䝑䝆4⟠ᡤ䜢㑅ᢥ䛩䜛䚹 “Add” 䜢䜽䝸䝑䜽䛧䛶5, 10, 15, 20 䛜Ⓩ㘓䛥䜜䛯䛣䛸䜢☜ㄆ䛧䚸 “Apply”䜢䜽䝸䝑䜽䛩䜛䚹 㻞㻠
- 25. (14) (12,13)䛾సᴗ䜢⧞䜚㏉䛧䚸“Name”䜢 Comp2䛸䛧䚸y᪉ྥ䛾 䜶䝑䝆4⟠ᡤ(8,12,18,22)䜢㑅ᢥ䞉Ⓩ㘓䛩䜛䚹 㻞㻡
- 26. (15) ྠᵝ䛻(12,13)䛾సᴗ䜢⧞䜚㏉䛧䚸“Name”䜢 Comp3䛸䛧䚸x ᪉ྥ䛾䜶䝑䝆4⟠ᡤ(25,26,29,30)䜢㑅ᢥ䞉Ⓩ㘓䛩䜛䚹 㻞㻢
- 27. (16) 䝯䝑䝅䝳䜢సᡂ䛩䜛䛯䜑䛻䚸䝰䝆䝳䞊䝹䜢 “Mesh”䛻ኚ᭦䛩 䜛䚹䛭䛧䛶䚸 Object Browser䛛䜙 “Box_1”䜢㑅ᢥ䛧䚸ྑ䜽䝸䝑䜽 䛷 “Show”䜢䜽䝸䝑䜽䛩䜛䚹 㻞㻣
- 28. (17) “Fit All”䜢䜽䝸䝑䜽䛧䚸䝰䝕䝹䜢⏬㠃䛻䝣䜱䝑䝖䛥䛫䜛䚹 “Mesh” → “Create Mesh”䜢䜽䝸䝑䜽䛧䚸䝯䝑䝅䝳䜢సᡂ䛩䜛䚹 㻞㻤
- 29. (18) “Geometry”䛻Object Browser䜘䜚 “Box_1”䜢㑅ᢥ 䛧䚸 “3D”䝍䝤䛾 “Algorithm”䛻 “Hexahedron (i,j,k)”䜢㑅ᢥ䛩䜛䚹 (19) “2D”㻌䝍䝤䜢䜽䝸䝑䜽 䛧䚸“Algorithm”䛻 “Quadrangle (Mapping)”䜢 㑅ᢥ䛩䜛䚹 㻞㻥
- 30. (20) “1D”䝍䝤䜢䜽䝸䝑䜽䛧䚸 “Algorithm”䛻 “Wire discreesaeon”䜢㑅ᢥ䛩䜛䚹 (21) “Hyprothesis”ྑ䛾䝪䝍䞁䜢 䜽䝸䝑䜽䛧䚸“Nb. Segments”䜢 㑅ᢥ䛩䜛䚹 㻟㻜
- 31. (22) “Number of Segments”䛻1䚸 “Type of distribueon”䛻 “Equidistant distribueon”䜢㑅ᢥ䛧䚸 “OK”䜢䜽䝸䝑䜽䛩䜛(z᪉ ྥ䛾ศ)䚹 “Apply and Close”䜢䜽䝸䝑䜽䛩䜛䚹 (23) “Mesh” → “Create Sub-‐mesh”㻌䜢䜽䝸䝑䜽䛩䜛䚹 㻟㻝
- 32. (24) “Geometry”䛻Object Browser䜘䜚Comp2䜢㑅ᢥ䛧䚸 “Algorithm”䛻 “Wire discreesaeon”䜢㑅ᢥ䛧䚸 “Hypothesis”ྑഃ䛾䝪䝍䞁䜢䜽䝸䝑䜽䛧䚸㻌“Nb. Segments”䜢䜽 䝸䝑䜽䛩䜛䚹 㻟㻞
- 33. (25) “Number of Segments”䛻50䜢ධຊ䛧䚸 “Type of distribueon䛻 “Equidistant distribueon”䜢㑅ᢥ䛧䚸 “OK”䜢䜽 䝸䝑䜽䛩䜛(y᪉ྥศ)䚹“Apply and Close”䜢䜽䝸䝑䜽䛩䜛䚹 (26) (23,24,25)䛾సᴗ䜢⧞䜚㏉䛩䚹“Geometry”䜢Comp3䚸 “Number of Segments”䜢250䛻タᐃ䛩䜛(x᪉ྥศ)䚹 㻟㻟
- 34. (27) Object Browser䜘䜚 “Mesh_1”䜢㑅ᢥ䛧䚸ྑ䜽䝸䝑 䜽䛷 “Compute”䜢䜽䝸䝑䜽䛧䚸 䝯䝑䝅䝳ศ䜢ᐇ⾜䛩䜛䚹 (28) “Mesh computaeon succeed”䛜⾲♧䛥䜜䜛(Node ᩘ25,602䚸Volumeᩘ12,500)䚹 “Close”䜢䜽䝸䝑䜽䛩䜛 㻟㻠
- 35. (29) Geometry䛷సᡂ䛧䛯ቃ⏺᮲௳䜾䝹䞊䝥䜢䝯䝑䝅䝳ୗ䛻䝁 䝢䞊䛩䜛䚹 “Mesh” → “Create Groups from Geometry” 䜢䜽 䝸䝑䜽䛩䜛䚹 㻟㻡
- 36. (30) “Mesh”䛻Mesh_1䜢㑅ᢥ䛧䚸 “Elements Geometry”䛻Object Browser䛛䜙Inlet䚸Outlet䚸Wall1䚸Wall2䚸Sym1䚸Sym2䜢㑅ᢥ 䛧䚸 “Apply and Close”䜢䜽䝸䝑䜽䛩䜛䚹 㻟㻢
- 37. (31) “File” → “Save As”䜢䜽䝸䝑䜽䛧䚸䝣䜯䜲䝹䜢ಖᏑ䛩䜛䚹ಖᏑ 䝣䜷䝹䝎䜢ᣦᐃ䛧䚸 “File name”䛻䝣䜯䜲䝹ྡ䜢ධຊ䛧䚸 “Save”䜢䜽䝸䝑䜽䛩䜛䚹 㻟㻣
- 38. (32) 䝯䝑䝅䝳䝕䞊䝍䜢Medᙧᘧ䛷సᡂ䛩䜛䚹Object Browser䜘䜚 Mesh_1䜢㑅ᢥ䛩䜛䚹 “File” → “Export” → “MED file”䜢䜽䝸䝑 䜽䛩䜛䚹 㻟㻤
- 39. (33) ฟຊ䝣䜷䝹䝎䜢ᣦᐃ䛧䛯ᚋ䚸 “File name”䛻䝣䜯䜲䝹ྡ䜢ධ ຊ䛧䚸 “Save”䜢䜽䝸䝑䜽䛩䜛䚹 “File” → “Exit”䜢䜽䝸䝑䜽䛩䜛䚹 㻟㻥
- 40. (34) “OK”䜢䜽䝸䝑䜽䛩䜛䚹 “Save Close”䜢䜽䝸䝑䜽䛩䜛䚹 㻠㻜
- 41. 4-‐2 Code_Saturne Wizard䛻䜘䜛ィ⟬ᐇ⾜ (1) “Applicaeon” → “CAELinux” → “Code_Saturne Wizard”䛷㉳ ື䛩䜛䚹 “Study Name”䚸“Case Name”䜢ධຊ䛧䚸 “Base directory”䚸”MED Mesh File”䜢ᣦᐃ䛧䚸 “GO”䜢䜽䝸䝑䜽䛩䜛䚹 㻠㻝
- 42. (2) Code_Saturne GUI䛜㉳ື䛩䜛䚹 “File” → “New file”䜢䜽䝸䝑䜽 䛩䜛䚹 㻠㻞
- 44. (4) “Mesh seleceon”䜢ᕥഃ䝒䝸䞊䜘䜚㑅ᢥ䛧䚸 “List of meshes”ୗ䛾“+”䜢䜽䝸䝑䜽䛧䚸Laminar1.med䜢㑅ᢥ䛩䜛䚹“File name”䛸 “Format”䜢☜ㄆ䛩䜛䚹 㻠㻠
- 45. (5) “Mesh quality criteria”䜢㑅ᢥ䛧䚸 “Post-‐processing format”䛿 “MED”䛻ኚ᭦䛧䚸 “Check mesh”䜢䜽䝸䝑䜽䛩䜛䚹 㻠㻡
- 47. (7) “Calculaeon features”䜢㑅ᢥ䛧䚸 “Steady/Unsteady flow algorithm”䛿 “steady flow”䛸䛧䚸䛿“off”䛻タᐃ䛩䜛䚹 㻠㻣
- 48. (8) “Turbulence models”䜢㑅ᢥ䛧䚸 “Turbulence model”䜢 “No model”䛻タᐃ䛩䜛䚹 㻠㻤
- 49. (9) “Thermal model”䜢㑅ᢥ䛧䚸 “Thermal scalar”䜢 “Temperature (Celsius)” 䛻タᐃ䛩䜛䚹 㻠㻥
- 50. (10) “Reference values”䜢㑅ᢥ䛧䚸 “Reference value for total pressure”䜢 101325.0 Pa䚸 “Reference value for velocity”䜢䚷 1.0 m/s䛻タᐃ䛩䜛䚹 㻡㻜
- 51. (11) “Fluid properees”䜢㑅ᢥ䛧䚸 “ρ”䜢 998.2 kg/m3䚸 “μ”䜢䚷 100.2e-‐5 Pa·∙s䚸“Cp”䜢4181.8 J/kg/K䚸“λ”䜢0.6 W/m/K䛻タᐃ 䛩䜛䚹 㻡㻝
- 52. (12) “Iniealizaeon”䜢㑅ᢥ䛧䚸 “Velocity”ྑഃ䛾⦅㞟䝪䝍䞁䜢䜽 䝸䝑䜽䛩䜛䚹u = 0.05; v = 0; w = 0; 䛻タᐃ䛧䚸“OK”䜢䜽䝸䝑䜽䛩 䜛䚹 㻡㻞
- 53. (13) “Thermal”ྑഃ䛾⦅㞟䝪䝍䞁䜢䜽䝸䝑䜽䛩䜛䚹TempC = 20; 䛻 タᐃ䛧䚸“OK”䜢䜽䝸䝑䜽䛩䜛䚹 㻡㻟
- 54. (14) “Definieon of boundary regions”㻌䜢㑅ᢥ䛧䚸ྑୗ“Import groups and references from Preprocessor liseng”䛾ྑഃ䜰䜲 䝁䞁䜢䜽䝸䝑䜽䛩䜛䚹 㻡㻠
- 57. (18) “Boundary condieons”䜢㑅ᢥ䛧䚸“Velocity”䛷norm䠄ἲ⥺᪉ ྥ䠅ὶ㏿䜢 0.05 m/s 䛸ධຊ䛩䜛䚹 㻡㻣
- 58. (19) “wall” (Wall1)䜢䜽䝸䝑䜽䛧䚸 “smooth wall” 䛻䝏䜵䝑䜽䜢ධ䜜 䜛㻌䚹 㻡㻤
- 59. (20) “Thermal”䛾“Type”䜢Prescribed value䛻䛧䚸“Value” 䛻 50 (䉝)䛸ධຊ䛩䜛䚹 㻡㻥
- 61. (22) “Pseudo-‐Time step” 䜢㑅ᢥ䛧䚸 “Number of iteraeons (restart included)”䛻 100 䜢ධຊ䛩䜛䚹 㻢㻝
- 62. (23) “Output Control” 䜢㑅ᢥ䛧䚸 “Log frequency”䛜 “Output liseng at each eme step” 䚸 1 䛻䛺䛳䛶䛔䜛䛣䛸䜢☜ㄆ䛩䜛䚹 “Writer”䝍䝤䜢䜽䝸䝑䜽䛩䜛䚹 㻢㻞
- 63. (24) “Name”䛾 “results”䜢䜽䝸䝑䜽䛧䚸 “Frequency”䛾 “Output every ‘n’ eme step” 䜢 10 䛻タᐃ䛩䜛䚹 㻢㻟
- 64. (24) “Monitoring Points”䝍䝤䜢䜽䝸䝑䜽䛧䚸 “Monitoring points coordinates”䛻䚸(n, X, Y, Z) = (1, 0, 0.0025, 0.001)䚸(2, 0.1, 0.0025, 0.001) 䜢㏣ຍ䛩䜛䚹 “Format”䛿 .dat䜢㑅ᢥ䛩䜛䚹 㻢㻠
- 65. (25) “File” → “Save as”䛷᮲௳䜢ಖᏑ䛩䜛䚹䝣䜯䜲䝹ྡ䜢ධຊ䛧 (Case1.xml)䚸 “Save”䜢䜽䝸䝑䜽䛩䜛䚹 㻢㻡
- 66. (26) “Prepare batch calculaeon”㻌䜢㑅ᢥ䛧䚸 “Start calculaeon” 䜢 䜽䝸䝑䜽䛧䛶ィ⟬䜢㛤ጞ䛩䜛䚹 㻢㻢
- 67. (27) “Saving calculaeon results”䛾⾲♧䛜ฟຊ䛥䜜䜜䜀ィ⟬⤊ 䚹 “OK”䜢䜽䝸䝑䜽䛩䜛䚹 㻢㻣
- 68. (28) “File” → “Quit” 䛷Code_Saturne Wizard䜢⤊䛩䜛䚹 㻢㻤
- 69. (29) 䝰䝙䝍䝸䞁䜾Ⅼ䛷䛾㏿ᗘ䚸 ᗘ䚸ᅽຊ➼䛾䝕䞊䝍䛿䚸 “RESU” – “᪥-‐㛫” – “monitoring”䝕䜱䝺䜽䝖䝸䛻ฟຊ䛥䜜 䜛䚹 㻢㻥
- 70. 4-‐3 Gnuplot䛻䜘䜛ィ⟬䛾☜ㄆ (1) CAE Terminal (Code-‐Saturne Terminal䛷䜒ྍ)䜢㉳ື䛩䜛䚹 㻣㻜
- 71. (2) Terminalୖ䛷௨ୗ䛾䝁䝬䞁䝗䜢ධຊ䛩䜛䚹 # 䝰䝙䝍䝸䞁䜾Ⅼ䛷䛾⣔ิ䝕䞊䝍䛜ฟຊ䛥䜜䜛䝕䜱䝺䜽䝖䝸䜎䛷⛣ື䚹 cd Saturne_Work/LAMINAR1/CASE1/RESU/data-‐time/monitoring # 䝣䜯䜲䝹䜢☜ㄆ䚹 ls # Gnuplot䜢㉳ື䚹䚷 gnuplot # Outlet䛷䛾X᪉ྥ㏿ᗘᡂศ䜢䝥䝻䝑䝖䛩䜛䚹 gnuplot plot ‘./probes_VelocityX.dat’ usi 1:3 w lp # Gnuplot䜢⤊䚹 gnuplot quit # Terminal䜢⤊䚹 exit 㻣㻝
- 73. 4-‐4 Salome䛻䜘䜛ྍど (1) Salome䜢㉳ື䛧䚸 “File” → “Open”䜢䜽䝸䝑䜽䛩䜛䚹䝰䝕䝹䜢 సᡂ䛧䛯hdf䝣䜯䜲䝹䜢ᣦᐃ䛩䜛䚹 㻣㻟
- 74. (2) 䝰䝆䝳䞊䝹䜢 “Post-‐Pro”䛻ኚ᭦䛩䜛䚹⤖ᯝ䝣䜯䜲䝹䜢䜲䞁 䝫䞊䝖䛩䜛䛯䜑䛻䚸 “File” → “Import” → “MED File”䜢䜽䝸䝑䜽 䛩䜛䚹 㻣㻠
- 75. (3) ゎᯒ⤖ᯝ䝣䜷䝹䝎CASE1/RESU/date-‐me/postprocessing 䛛 䜙 “results.med”䜢㑅ᢥ䛩䜛䚹 㻣㻡
- 76. (4) Object Browser䛛䜙䚸 “Velocity” – “10 s”䜢㑅ᢥ䛩䜛䚹 “Visualizaeon” → “Vectors”䜢䜽䝸䝑䜽䛩䜛䚹 㻣㻢
- 77. (5) “Magnitude coloring”䛻䝏䜵䝑䜽䜢ධ䜜䚸 “Scalar Bar”䝍䝤䜢䜽 䝸䝑䜽䛩䜛䚹 㻣㻣
- 78. (5) “Scalar Mode”䜢 “[1] Component X”䛻䛧䚸 “Height”䜢 0.12䛻 タᐃ䛧䚸 “OK”䜢䜽䝸䝑䜽䛩䜛䚹 㻣㻤
- 79. (6) “Fit All”䜢䜽䝸䝑䜽䛩䜛䚹㻌ḟ䛻䚸Inlet㏆䛷䛾ὶ㏿䝧䜽䝖䝹䜢 ᣑ䛧䛶⾲♧䛩䜛䚹 㻣㻥
- 81. (7) 䝰䝕䝹ୖ䛻䜹䞊䝋䝹䜢⨨䛝䚸ྑ䜽䝸䝑䜽䛷 “Sweep”䜢㑅ᢥ䛩 䜛䚹 “Cycled”䛻䝏䜶䝑䜽䜢ධ䜜䚸⏕䝪䝍䞁(䕪)䜢䜽䝸䝑䜽䛩䜛䛸 䜰䝙䝯䞊䝅䝵䞁䛜⧞䜚㏉䛥䜜䜛䚹 㻤㻝
- 82. (8) ྑ䜽䝸䝑䜽䛷 “Hide All”䜢㑅ᢥ䛧䚸䜾䝷䝣䜱䝑䜽⏬㠃䜢ᾘཤ䛩䜛䚹 ḟ䛻 Cut Lines 䜢సᡂ䛩䜛䚹 “Velocity” – “10 s”䜢㑅ᢥ䛧䚸ྑ䜽 䝸䝑䜽䛷 “Cut Lines”䜢㑅ᢥ䛩䜛䚹 㻤㻞
- 83. (9) “Orientaeon”䛾3␒┠ II Z-‐X 䛻䝏䜵䝑䜽䜢ධ䜜䚸 “Show preview”䛻䝏䜵䝑䜽䜢ධ䜜䚸 “Cut planes”䝍䝤䜢䜽䝸䝑䜽䛩䜛䚹 㻤㻟
- 84. (10) “Orientaeon”䛾1␒┠ II X-‐Y 䛻䝏䜵䝑䜽䜢ධ䜜䚸 “Number of planes”䛻 1 䜢ධຊ䛧䚸 “Scalar Bar”䝍䝤䜢䜽䝸䝑䜽䛩䜛䚹 㻤㻠
- 85. (11) “Plot2d scene:1”䛻ὶ㏿ศᕸ䛾䜾䝷䝣䛜⾲♧䛥䜜䜛䚹Inlet (X = 0)䛷 0.05 m/s䚸Outlet (X = 1)䛷 0.075 m/s䛷䛒䜛䛣䛸䜢☜ㄆ 䛩䜛䚹 㻤㻡
- 86. (12) ᗘศᕸ䛾䝁䞁䝍䞊䜢⾲♧䛩䜛䚹Object Browser䛛䜙 “TempC” – “10 s”䜢㑅ᢥ䛧䚸ྑ䜽䝸䝑䜽䛷 “Scalar Map”䜢䜽䝸䝑 䜽䛩䜛䚹 㻤㻢
- 87. (12) “Dimensions”䛾 “Height”䜢 0.12 䛸䛧䚸 “OK”䜢䜽䝸䝑䜽䛩䜛䚹 㻤㻣
- 89. 5. [₇⩦2] ⦰ᑠ⟶ෆ㛫䜜䛾ゎᯒ Fig. 2 ゎᯒ䝰䝕䝹 Boundary Condieon Inlet ὶ㏿ Outlet Wall 10 m/s Ẽ㛤ᨺ (0Ẽᅽ) no-‐slip (ὶ㏿0 m/s) Table 4 ቃ⏺᮲௳ 㻤㻥
- 90. Property Symbol Value Density (ᐦᗘ) ρ Viscosity (⢓ᗘ) μ Kinemaec viscosity (ື⢓ᗘ) ν Specific heat (ẚ⇕) Cp Heat conducevity (⇕ఏᑟ⋡) λ 1.205 kg/m3 1.822 x 10-‐5 Pa·∙s 1.512 x 10-‐5 m2/s 1006.0 J/(kg·∙K) 0.0257 W/(m·∙K) Table 5 ✵Ẽ (20䉝) 䛾≀ᛶ್ 䝺䜲䝜䝹䝈ᩘ䛿䚸 Re = Ud/n = 10 x 0.1 / 1.512x10-‐5 = 66137.6 䛷䛒䜛䛾䛷䚸ὶ䜜䛿ὶ䛷䛒䜛䚹 䝯䝑䝅䝳䛿䛶ᅄ㠃యせ⣲䛷సᡂ䛩䜛䚹 㻥㻜
- 91. 5-‐1 Salome䛻䜘䜛᱁Ꮚ⏕ᡂ (1) Salome䜢㉳ື䛧䚸䝰䝆䝳䞊䝹䜢 “Geometry”䛻ኚ᭦䛧䚸䝰䝕 䝹䜢సᡂ (2) “Acevate module”䛜ฟ䛶䛝䛯䜙䚸 “New”䜢㑅ᢥ䚹 㻥㻝
- 92. (3) “New Enety” → “Basic” → “3D Sketch” 䜢䜽䝸䝑䜽䛩䜛䚹 㻥㻞
- 93. (4) “3D Sketch Construceon” 䛜⌧䜜䛯䜙䚸X: 0, Y: 0, Z:0 䛸䛧䛶 “Apply”䜢䜽䝸䝑䜽䛩䜛(1Ⅼ䜑)䚹ḟ䛻䚸X: 0, Y: 0.05, Z:0 䛸䛧䛶 “Apply” 䜢䜽䝸䝑䜽䛩䜛(2Ⅼ䜑)䚹 㻥㻟
- 94. (5) ྠᵝ䛻䛧䛶䚸X: 0.05, Y: 0.05, Z:0 (3Ⅼ䜑)䚸X: 0.2, Y: 0.025, Z:0 (4Ⅼ䜑) 䜢タᐃ䛩䜛䚹 㻥㻠
- 95. (6) ྠᵝ䛻䛧䛶䚸X: 0.25, Y: 0.025, Z:0 (5Ⅼ䜑)䚸X: 0.25, Y: 0, Z:0 (6 Ⅼ䜑) 䜢タᐃ䛩䜛䚹᭱ᚋ䛻 “Sketch Closure”䜢䜽䝸䝑䜽䛩䜛䚹 㻥㻡
- 96. (7) ᅗᙧ䜢ᅇ㌿䛥䛫䛶ᅇ㌿య䜢సᡂ䛩䜛䚹 “New Enety” → “Generaeon” → “Revolueon”䜢䜽䝸䝑䜽䛩䜛䚹 㻥㻢
- 97. (8) “Objects” 䛻 “3D Sketcher_1”䜢㑅ᢥ䛩䜛䚹viewer䛛䜙 “Axis” 䜢x㍈䛻㑅ᢥ䛩䜛(3D Sketcher_1:edge_13)䚹 “Angle”䜢 360 䛸 䛧䚸 “Apply and Close”䜢䜽䝸䝑䜽䛩䜛䚹 㻥㻣
- 98. (9) “View” → “Display Mode” → “Shading”䜢䜽䝸䝑䜽䛧䚸⾲♧᪉ ἲ䜢ኚ᭦䛩䜛䚹 “New Enety” → “Build” → “Solid”䜢䜽䝸䝑䜽䛧䚸 ᅇ㌿య䜢䝋䝸䝑䝗䛻タᐃ䛩䜛䚹 㻥㻤
- 99. (10) “Objects”䛻 Object Browser 䜘䜚 “Revolueon_1”䜢㑅ᢥ 䛧䚸“Apply and Close”䜢䜽䝸䝑䜽䛩䜛䚹 㻥㻥
- 100. (11) ྛቃ⏺㠃䛻ྡ๓䜢䛡䜛䚹 “New Enety” → “Group” → “Create”䜢䜽䝸䝑䜽䛩䜛䚹 㻝㻜㻜
- 101. (12) “Shape Type”䛛䜙3␒┠䛾䝣䜵䞊䝇(䕔)䛻䝏䜵䝑䜽䜢ධ䜜䚸 “Name”䛻 Input 䛸ධຊ䛩䜛䚹 viewer䛛䜙ධཱྀഃ䛾䝣䜵䞊䝇䜢 㑅ᢥ䛧䚸 “Add”䜢䜽䝸䝑䜽䛧䛶 3 䛜Ⓩ㘓䛥䜜䛯䛣䛸䜢☜ㄆ䛧䚸 “Apply”䜢䜽䝸䝑䜽䛩䜛䚹䚹 㻝㻜㻝
- 102. (13) “Name”䛻㻌Outlet 䛸ධຊ䛩䜛䚹 viewer䛛䜙ฟཱྀഃ䛾䝣䜵䞊 䝇䜢㑅ᢥ䛧䚸 “Add”䜢䜽䝸䝑䜽䛧䛶 22 䛜Ⓩ㘓䛥䜜䛯䛣䛸䜢☜ㄆ 䛧䚸 “Apply”䜢䜽䝸䝑䜽䛩䜛䚹䚹 㻝㻜㻞
- 103. (14) “Name”䛻 Wall 䛸ධຊ䛩䜛䚹 viewer䛛䜙ഃ㠃䛾3䛴䛾䝣䜵䞊 䝇䜢㑅ᢥ䛧䚸㻌ẖᅇ“Add”䜢䜽䝸䝑䜽䛧䛶 7, 12, 17 䛜Ⓩ㘓䛥䜜䛯 䛣䛸䜢☜ㄆ䛧䚸 “Apply”䜢䜽䝸䝑䜽䛩䜛䚹䚹 㻝㻜㻟
- 104. (15) 䝯䝑䝅䝳సᡂ⏝䛻䜶䝑䝆䜢సᡂ䛩䜛䚹 “Shape Type”䛛䜙2␒ ┠䛾䜶䝑䝆(䠋)䛻䝏䜵䝑䜽䜢ධ䜜䚸 “Name”䜢 Edge䛸䛩䜛䚹 Inlet䛸Outlet䛾䜶䝑䝆䜢㑅ᢥ䛧䚸 “Add”䜢䜽䝸䝑䜽䛧䛶 5, 19 䛜 Ⓩ㘓䛥䜜䛯䛣䛸䜢☜ㄆ䛧䚸 “Apply and Close”䜢䜽䝸䝑䜽䛩䜛䚹 㻝㻜㻠
- 105. (16) Object Browser䜘䜚 “Inlet” 䜢㑅ᢥ䛧䚸ྑ䜽䝸䝑䜽䛷 “Show Only” 䜢䜽䝸䝑䜽䛩䜛䚹viewer䛻 inlet䝣䜵䞊䝇䛜⾲♧䛥䜜䚸⾲ ♧᪉ἲ䜢 “Wire frame”䛻ษ䜚᭰䛘䜛䚹ྠᵝ䛻䛧䛶䚸Outlet䚸 Wall䚸Edge䛜ṇ䛧䛟䛷䛝䛶䛔䜛䛣䛸䜢☜ㄆ䛩䜛䚹 㻝㻜㻡
- 106. (17) 䝰䝆䝳䞊䝹䜢 “Mesh”䛻ኚ᭦䛩䜛䚹 “Solid_1”䜢㑅ᢥ䛧䚸ྑ䜽 䝸䝑䜽䛷 “Show”䜢㑅ᢥ䛩䜛䚹 㻝㻜㻢
- 107. (18) “Fit all”䛻ኚ᭦䛩䜛䚹 “Mesh” → “Create Mesh”䜢䜽䝸䝑䜽䛩 䜛䚹 㻝㻜㻣
- 108. (19) “Geometry”䛻 Solid_1 䜢㑅ᢥ䛧䚸 “Algorithm” 䛻 Netgen 1D-‐2D-‐3D䚸 “Hypothesis”ྑ䛾䝪䝍䞁䜢䜽䝸䝑䜽䛧䚸 “NETGEN 3D Parameters” 䜢䜽䝸䝑䜽䛩䜛䚹 㻝㻜㻤
- 109. (20) “Max. Size”䛻 0.01 䜢ධຊ䛧䚸 “Local sizes”䝍䝤䜢䜽䝸䝑䜽䛩 䜛䚹 㻝㻜㻥
- 110. (21) Object Browser䜘䜚 Wall 䜢㑅ᢥ䛧䛶䚸“On Sub-‐Face”㻌䜢䜽 䝸䝑䜽䛩䜛䚹 “Value”䛻 0.005 䜢ධຊ䛧䚸 “OK”䜢䜽䝸䝑䜽䛩䜛䚹 㻝㻝㻜
- 111. (22) “Apply and Close”䜢䜽䝸䝑䜽䛩䜛䚹 㻝㻝㻝
- 112. (23) “Mesh” → “Create Sub-‐mesh”䜢䜽䝸䝑䜽䛩䜛䚹 “Mesh”䛻 “Mesh_1”䚸 “Geometry”䛻Object Browser䛛䜙 Edge䜢㑅ᢥ䛧䚸 “Algorithm”䛻 “Wire Discreesaeon”䜢㑅ᢥ䛩䜛䚹 “Hypothesis”ྑ䛾䝪䝍䞁䜢䜽䝸䝑䜽䛧䚸 “Nb. Segments”䜢䜽䝸䝑 䜽䛩䜛䚹 㻝㻝㻞
- 113. (24) “Number of Segments”䛻 40 䜢ධຊ䛧䚸 “OK”䜢䜽䝸䝑䜽䛩䜛䚹 “Apply and Close”䜢䜽䝸䝑䜽䛩䜛䚹 㻝㻝㻟
- 114. (25) Object Browser䜘䜚Mesh_1䜢㑅ᢥ䛧䚸ྑ䜽䝸䝑䜽 䛷“Compute”䜢䜽䝸䝑䜽䛩䜛䚹 㻝㻝㻠
- 116. (27) Geometry䛷సᡂ䛧䛯ቃ⏺᮲௳䜢䝯䝑䝅䝳䛻䝁䝢䞊䛩䜛䚹 “Mesh” → “Create Groups from Geometry”䜢䜽䝸䝑䜽䛩䜛䚹 “Mesh”䛻 Mesh_1 䜢㑅ᢥ䛧䚸 “Geometry”䛻Object Browser 䜘䜚Inlet䚸Outlet䚸Wall䜢㑅ᢥ䛧䚸 “Apply and Close”䜢䜽䝸䝑 䜽䛩䜛䚹 㻝㻝㻢
- 117. (28) ಖᏑ䛩䜛䝣䜷䝹䝎䜢ᣦᐃ䛧䚸 “File name”䛻䝣䜯䜲䝹ྡ䜢ධ ຊ䛧䚸 “Save”䜢䜽䝸䝑䜽䛩䜛䚹 㻝㻝㻣
- 118. (29) Code_Saturne䛷ᚲせ䛺MED䝣䜯䜲䝹䜢ฟຊ䛩䜛䚹Object Browser䜘䜚 Mesh_1 䜢㑅ᢥ䛧䚸 “File” → “Export” → “MED file”䜢䜽䝸䝑䜽䛩䜛䚹ฟຊ䝣䜷䝹䝎䜢ᣦᐃ䛧䚸 “File name”䛻 䝣䜯䜲䝹ྡ䜢ධຊ䛧䚸 “Save”䜢䜽䝸䝑䜽䛩䜛䚹 㻝㻝㻤
- 119. (30) “File” → “Exit”䜢䜽䝸䝑䜽䛧䛶Salome䜢⤊䛩䜛䚹 㻝㻝㻥
- 120. (31) Code-‐Saturne Wizard䜢㉳ື䛧䚸Code-‐Saturne CFD Study䛜 ฟ䛶䛝䛯䜙䚸 “Study Name”䚸 “Case Name”䜢ධຊ䛧䚸 “Base directory” 䚸 “MED Mesh File”䜢ᣦᐃ䛧䛯䜙䚸 “Go”䜢䜽䝸䝑䜽 䛩䜛䚹 㻝㻞㻜
- 121. (32) “File” → “New file”䜢䜽䝸䝑䜽䛩䜛䚹 㻝㻞㻝
- 122. (33) “Meshes seleceon” 䜢㑅ᢥ䛧䚸 “List of meshes”ୗ䛾“+”䜢䜽 䝸䝑䜽䛧䚸Diffuser1.med䜢㑅ᢥ䛩䜛䚹“File name”䛸 “Format”䜢 ☜ㄆ䛩䜛䚹 㻝㻞㻞
- 123. (34) “Meshes quality criteria” 䜢㑅ᢥ䛧䚸 “Post-‐processing format”䛷 MED 䜢㑅ᢥ䛧䚸 “Check mesh”䜢䜽䝸䝑䜽䛩䜛䚹 㻝㻞㻟
- 124. (35) “OK” 䜢䜽䝸䝑䜽䛩䜛䚹 㻝㻞㻠
- 125. (36) “Calculaeon features”䜢㑅ᢥ䛧䚸 “Steady/Unsteady flow algorithm” 䜢 “steady flow”䛻タᐃ䛧䚸䛭䛾䛿“off”䛻䛩䜛䚹 㻝㻞㻡
- 126. (37) “Turbulence models”䜢㑅ᢥ䛧䚸 “k-‐epsilon”䛻タᐃ䛩䜛䚹 㻝㻞㻢
- 127. (38) “Thermal model”䜢㑅ᢥ䛧䚸 “Thermal scalar”䛻 “No thermal scalar”䜢タᐃ䛩䜛䚹 㻝㻞㻣
- 128. (39) “Reference values”䜢㑅ᢥ䛧䚸 “Reference value for total pressure” 䛻 101325.0 Pa 䜢タᐃ䛩䜛䚹 㻝㻞㻤
- 129. (40) “Fluid properees”䜢㑅ᢥ䛧䚸㻌ρ = 1.205 kg/m3䚸μ = 1.822e-‐05 Pa·∙s䚸Cp = 1006 J/kg/K 䜢タᐃ䛩䜛䚹 㻝㻞㻥
- 130. (41) “Gravity”䜢㑅ᢥ䛧䚸㻌䛩䜉䛶 0 m/s2䛻タᐃ䛩䜛䚹 㻝㻟㻜
- 131. (42) “Definieon of boundary regions”䜢㑅ᢥ䛧䚸 “Import groups and references from Preprocessing liseng”ྑ䛾䜰䜲䝁䞁䜢䜽 䝸䝑䜽䛩䜛䚹 㻝㻟㻝
- 133. (44) “Definieon of boundary regions”䜢㑅ᢥ䛧䚸 BC_1䚸 BC_2 䛾“Nature”䜢Inlet䚸Outlet䛻ኚ᭦䛩䜛䚹 㻝㻟㻟
- 134. (45) “Boundary condieons”䜢㑅ᢥ䛧䚸 BC_1 (Inlet)䜢䜽䝸䝑䜽䛧䛶䚸 “Velocity” 䛻 10 m/s 䜢タᐃ䛩䜛䚹 㻝㻟㻠
- 135. (46) “Turbulence”䜢㑅ᢥ䛧䚸 “Hydraulic diameter” 䛻 0.1 m 䜢タ ᐃ䛩䜛䚹 㻝㻟㻡
- 136. (47) “Global parameters”䜢㑅ᢥ䛧䚸 “Gradient calculaeon method”䛻 “Least squares method over pareal extended cell neighborhood” 䜢タᐃ䛩䜛䚹 㻝㻟㻢
- 137. (48) “Pseudo-‐Time step”䜢㑅ᢥ䛧䚸 “Number of iteraeons (restart included)” 䛻 200 䜢タᐃ䛩䜛䚹 㻝㻟㻣
- 138. (49) “Output control”䜢㑅ᢥ䛧䚸 “Log frequency” 䜢 “Output every ‘n’ eme step”䛻ኚ᭦䛧䛶 10 䜢ධຊ䛩䜛䚹 㻝㻟㻤
- 139. (50) “Writer”䝍䝤䜢䜽䝸䝑䜽䛧䚸 “Name”䛾 “results”䜢䜽䝸䝑䜽䛩 䜛䚹 “Frequency”䛾 “Output every ‘n’ eme step” 䜢 10 䛻タᐃ 䛩䜛䚹 㻝㻟㻥
- 140. (51) “Monitoring Points”䝍䝤䜢䜽䝸䝑䜽䛧䚸 “Monitoring points output”䛻 (n, X, Y, Z) = (1, 0, 0, 0)䚸(2, 0.25, 0, 0)䜢タᐃ䛩䜛䚹㻌 㻝㻠㻜
- 141. (52) “File” → “Save As”㻌䜢䜽䝸䝑䜽䛩䜛䚹“Name”䛻䝣䜯䜲䝹ྡ䜢 ධຊ䛧䚸 “Save”䜢䜽䝸䝑䜽䛩䜛䚹㻌 㻝㻠㻝
- 142. (53) “Prepare batch calculaeon”䜢㑅ᢥ䛧䚸 “Start calculaeon”䜢 䜽䝸䝑䜽䛧䛶ィ⟬䜢㛤ጞ䛩䜛䚹୪ิィ⟬䜢䛧䛯䛔ሙྜ䛿䚸㛤ጞ ๓䛻 “Number of processes” 䛻ᙜྍ⬟䛺䝁䜰ᩘ䜢ධຊ䛩䜛䚹㻌 㻝㻠㻞
- 143. (54) “Saving calculaeon results”䛾⾲♧䛜ฟ䛯䜙ィ⟬䛜⤊䚹 “OK”䜢䜽䝸䝑䜽䛩䜛䚹㻌䚷 㻝㻠㻟