Melemine Coated Door 18mm thick particle board as core Edges sealed with 2mm thick REHAU PVC, High quality German DECORATOR and Spain LAMIGRAF impregnated decor paper HPL Coated Door 18mm thick particle board as coreEdges sealed with 2mm thick REHAU PVCThe decorative sheet thickness is 0.6~0.8mm Lacquered Door18/21/25mm thick MDF as core High gloss and matt lacquer is PU lacquer Flash lacquer is PU lacquer with shiny powders Front face or both faces lacquered PVC Foil Coated Door18/21/25mm thick MDF as core Front face coated with PVC, back face coated with white melamine High quality PVC foil, mainly supplied by Renolit and Riken PP Foil Coated Door21/25mm thick MDF as core Both faces coated with PPFine wood grain, affordable and often used as the alternative of solid wood.Acrylic(PWMA) Coated Door 18mm thick particle board as core Front face coated with colored 1mm thick painted acrylic Back face laminated with ABS decor paper Edges sealed with same-color acrylic. Check all style kitchens.
10 Best WordPress Plugins to make the website effective in 2024
2018 kitchen cabinet technical manual Oppein Home
1. KITCHENCABINETDESIGNMANUAL
2 0 1 8 Design Manual
KITCHEN
CABINET
OPPEIN WechatOPPEIN Website 360° Showroom
OPPEIN HOME GROUP INC.
Add: #366, Guanghua 3rd Road, Baiyun District, Guangzhou, China
+86-20-36730513
sales@oppein.com
www.oppeinhome.com
Oppein Home The Largest Cabinetry Manufacturer in Asia
2. DECLARATION:
Due to printing variations and limitations, textures, grains, finishes and colors shown in this manual are for
representation only. We can not guarantee they perfectly match the actual samples or products.
Wood Veneer Series
027
014
013
011
002
001
Aluminum Framed Glass/ DoorsAcrylic
Flat Laminate Series
Melamine Series
High Pressure Laminate Series
PVC/PP Series
UV Lacquer Series
Methacrylate Series
Lacquer Series
Wood Framed Glass Doors
Glass & Acrylic Inserts
Carcase
Toughened Glass Series
Countertop Profiles
Countertop Materials
036
045
049
034
030
052
038
053
039
057
On-Worktop Cabinet(metric)
Wall Cabinet(metric)
High Cabinet( )metric
Middle Cabinet( )metric
Base Cabinet( )metric
Hardware
Bartop Legs & Aluminum Racks
Kickboards
Drawers & Slides
Handles & Knobs
Hinges & Buffers
Door Fittings
Aluminum Bar Handles
Legs & Shelf Fittings
PVC & Acrylic Edge Bands
064Aluminum Edge Bands
058
107
099
097
095
094
093
084
073
066
068
121
114
109
077
Sink Hole And Installation
063Decorative Caps
3. Carcase Configuration
Premium Standard A
Carcase Panel 15mm thick, 7-layer plywood 16mm thick green-core
particle board
Type Standard B
16mm thick white-core particle
board from Thailand
Carcase Panel Benefits
Carcase Finish
Carcase
Eco-Friendliness
Carcase Available
Finishes
Carcase Edge
Carcase Back Panel
Movable Shelf
Movable Shelf Edge
Drawer Side Panel
Drawer Edges
Drawer Bottom
Suspension Bracket for
Hanging Cabinet
Suspention Bracket for
Base Cabinet
Adjustable Leg (Plinth)
Kickboard Material
& Color
Vent Mesh of
Stove Cabinet
Bottom Panel Coat for
Sink Cabinet
Aluminum Transverse
(cross bar)
Idle Hole Insert
Dustproof Corner
Insert
Anti-sagging
Excellent screw-holding ability,
outstanding resistance to heat
and moisture, ease care
Durable and easy care Durable and easy care
Both faces 0.6mm thick
HPL coated
Both faces melamine coated Both faces melamine coated
E1 E1 E1
PWGF0001, PWGF0002,
PWGF0003, PWGF0004,
PWGF0006, PWGF0007
PWGA0006, PWGA0007,
PWGA0008
PWGA0001,PWGA0004,
PWGA0009,PWGA0010
front edge coated with 1.5mm thick PVC; other edges coated with 0.6mm thick PVC.
3mm thick MDF, both faces melamine coated.
15mm thick plywood,
both faces HPL coated
16mm thick green-core particle
board, both faces melamine coated
16mm thick white-core particle
board, both faces melamine coated
Front edge sealed with 1.5mm thick PVC
Same as carcase panel
Glass Shelf Edge Front edge aluminum edge band PWFL0003sealed with
Movable Shelf Support WGC10
Four edges banded by 0.6mm thick PVC
9mm or 16mm thick carcase panel
Hettich consealed type, with
55KG loading capacity;
or OPPEIN type, with 50KG
load capacity.
OPPEIN type, with 50KG
load capacity.
OPPEIN type, with 50KG
load capacity.
WGMD01, with 100kG load capacity (optional)
PP leg, max. 100KG load capacity per foot
Mateiral and color are optional, including aluminum, plastic, HPL, PVC, Venner
Available
0.25mm thick aluminum-foil coated, to keep bottom panel from water and moisture
for all base cabinets, in order to reinforce (excpet diagonal cabinets or special cabinets)
Available
Available
Optional for 900mm wide wall cabinets.
Door Configuration
Melemine Coated Door
18mm thick particle board as core
Edges sealed with 2mm thick REHAU PVC,
High qualilty German SCHATTDECOR and
Spain LAMIGRAF impregnated decor paper
HPL Coated Door
18mm thick particle board as core
Edges sealed with 2mm thick REHAU PVC
The decorative sheet thickness is 0.6~0.8mm
Lacquered Door
18/21/25mm thick MDF as core
High gloss and matt lacquer is PU lacquer
Flash lacquer is PU lacquer with shiny powders
Front face or both faces lacquered
PVC Foil Coated Door
18/21/25mm thick MDF as core
Front face coated with PVC, back face coated with
white melamine
High quality PVC foil, mainly supplied by Renolit
and Riken
PP Foil Coated Door
21/25mm thick MDF as core
Both faces coated with PP
Fine wood grain, affordable and often used as the
alternative of solid wood.
Acrylic(PWMA) Coated Door
18mm thick particle board as core
Front face coated with colored 1mm thick painted acrylic
Back face laminated with ABS decor paper
Edges sealed with same-color acrylic
4. Door Configuration
Acrylic(PWMA) Coated Door
18 thick plywood as core
Front face coated with 1.8mm-thick painted arylic
Back face laminated with ABS decor paper
Edges sealed with same-color acrylic
UV Lacquered Door
18mm thick MDF as base
Front face laminated with melamine, then UV lacquered
Back face coated with white melamine
Edges sealed with PVC
Flat Laminate Door
18mm thick MDF as base
Front face laminated with 0.7~1.2mm thick painted acrylic,
or 0.4~0.5mm thick PVC or PETG decor paper.
Back face coated with white melamine paper.
Edges sealed with ABS or PVC
Structure
Back transverse
Back panel
Right side panel
Left side panel
Door
Bottom panel
Shelf
Aluminum transverse
(rail, crossbar)
Base Cabinet Structure
Rail
Rail
Core(insert)
Stile
Stile
Framed Door Structure
Methacrylate(PMMA+ABS )Coated Door
18mm thick plywood/particle board as core
Front face coated with 0.8~1.2mm thick methacrylate
(PMMA+ABS)layer
Back face same as front face, or laminated with 0.8mm
thick ABS decor paper
Edges sealed with same-color acrylic
5. Ergonomic Planning
Kitchen Work Triangle
The kitchen work triangle is a concept used to determine efficient kitchen layouts.
The primary tasks in a home kitchen are carried out between the cook top, the sink
and the refrigerator. These three points and the imaginary lines between them,
make up what kitchen experts call the work triangle. The idea is that when these
three elements are in close (but not too close) proximity to one other, the kitchen
will be easy and efficient to use, cutting down on wasted steps.
There are exceptions to this rule: in single wall kitchens, it’s geometrically impossible
to achieve a true triangle—but efficiency can still be achieved through the configu-
ration of the three items, and how far apart they are.
SinkRefrigerator
Worktop
Hob
Worktop Worktop
Preserving
Cooking
Washing
Clean and uncluttered lines often define modern style. The distinct features include
frameless fronts, geometry changes, symmetry, metallic accents, and a lack of
moldings and other decorative enhancements. Modern style exhibits a streamlined
appearance and is the best choice if you want your space to make a bold
statement. Its surface finishes are often man-made rather than natural, such as
lacquer, laminate, PVC, melamine or other synthetic thermofoils.
Modern
6. Transitional
Transitional style blends elements of both traditional and contemporary
design to create a welcoming space that invites all to linger. It is natural
and uncomplicated with relaxed lines and a live-in feel.
Its lines are softer and details are not as complicated as traditional ones.
Transitional style adapts more easily to its surroundings, no matter your
interior style is contemporary or traditional style.
Transitional style can be attained by combining finishes and details of
both traditional and transitional style, or use of new material.
Decide on the right layout
It's the layout of the kitchen—and not its color or its style—that determines how easy it is to cook, eat and socialize in the
kitchen. At the most basic level, the layout addresses the placement of the appliances, the sink, the cabinets, the counters,
the windows and doors, and furniture such as a kitchen table and chairs. If you're building a new home or adding on, you
have the luxury of choosing the layout that works best for you and your family. If you're remodeling, the structure of the
existing home will limit the options. The most common kitchen layouts include the one-wall kitchen, the galley kitchen, the
U-shaped kitchen, the G-shaped kitchen, and the L-shaped kitchen—some of which can also incorporate an island.
U-shaped
One wall
L-shaped
One wall with island L shaped with island
Galley G-shaped
7. Materials and colors make it happen
Materials and finishes are the precondition of outstanding workpieces.
OPPEIN provides 15 material types and more than 220 door finishes.
They are carefully sorted annually based on global design trends, market
feedbacks and quality performances.
Thanks to them, it is easier to realize your dream kitchen.
Choose the right door style
More than 160 popular door styles can be found at OPPEIN. OPPEIN has the largest collection of
door styles and colors which others can not rival. These provide a multitude of versatilities to
achieve different kitchen styles, such as modern, contemporary, transitional, traditional and country.
At OPPEIN, you do not need to limit your imagination, just activate it.
6 Primary Door Styles
Modifications from the 6 primary door styles
Flat | Slab Raised Recessed Bullnose Cathedral Shaker
8. Size Limits Of Door And Drawer Fronts
Finish/Coat
Door Panel Drawer Front Lift Up Door/Flap Door Glass Door False Door
Wood veneer
/lacquer
PVC/PP
HPL /
Melamine/
UV lacquer/
Acrylic/
Flat laminates
Toughened
Glass Door
Aluminum Framed
Glass Door
1) W≤600mm,
H≤1450mm.
(W≤640mm if door
style is YMM034.)
W≤1200mm,
H≤400mm
W≤1200mm,
H≤500mm
W≤600mm,
H≤1450mm.
(W≤640mm if door
style is YMM034.)
W≤650mm,
H≤2250mm
W≤650mm,
H≤1450mm
W≤1200mm,
H≤600mm
W≤1200mm,
H≤600mm
W≤650mm,
H≤1450mm
W≤650mm,
H≤2250mm
W≤600mm,
H≤1600mm
W≤1200mm,
H≤400mm
W≤1200mm,
H≤400mm
W≤600mm,
H≤1600mm
W≤650mm,
H≤2250mm
W≤600mm,
H≤1450mm.
(H≤640mm if door
style is YMQ003/
YMM034.)
W≤1200mm,
H≤600mm
W≤1200mm,
H≤600mm
W≤600mm,
H≤1600mm.
(H≤2200mm if door
style is YML002A/
YML002B.)
W≤1200mm,
H≤600mm
W≤1200mm,
H≤600mm
Tips:
Doors and drawers exceeding size limits can not be processed, because they are inclined to warp.
Door Type
Wood Veneer Grade D
DOOR
STYLE
PICTURE
DOOR DRAWER/ SIZE LIMITS/TECHNICS
ILLUSTRATION
OPTIONAL FRAMED
GLASS DOOR
YMN001
(W-09) H
W
-Door thickness: 19mm
-Optional finishes:
PWMA4001,PWMM4003,
PWMM4004
H
W
High Gloss Wood Veneer
PWMM4001 (WBMM801) PWMM4002 (WBMM802)
YMB001
YMB011
PWMM4003 (WBMM803)
PWMM4005 (WBMM318)
(high gloss)
PWMM4004 (WBMM804)
YMN002
(YMM35)
YMN003
(YMM53)
YMN004
(YMM62)
PWMM2038 (WBMM325)
-For door panel:
W≤600mm and H≤1450mm
-For drawer front/flap door:
W≤1200 and H≤400mm
NAME PICTURE NOTES
Decorative
Panel
YSB035
(YSB52)
CODE BASE & FINISH
-Base:MDF+veneer
-Finish:paint
For island cabinet
Decorative
Shelf
YSG017
(YSG17)
-Base:MDF;
-Finish: solid wood paint & wood veneer
D=60mm
Decorative Accessories
30
YSG007
(YSG07)
-Base:MDF
-Finish:solid wood paint
Thickness=30mmDecorative
Shelf
-For door panel:
100≤W≤600mm and
120mm≤H≤1450mm
-For drawer/flap door:
100≤W≤1200mm,120mm≤H≤400mm
-Bar handle:PWMK0020
-Door thickness: 19mm
-Optional finish: PWMA4005
NONE
-For door panel:
W≤600mm and H≤1450mm
-For drawer front/flap door:
W≤1200mm and H≤400mm
-Grain direction: horizontal
-Door thickness: 20mm
-Optional finish: PWMA4002,
PWMM4004
NONE
-For door panel:
W≤600mm and H≤1450mm
-For drawer front/flap door:
W≤1200mm and H≤400mm
-Door thickness: 20mm
-Optional finish: PWMA4003
NONE
DOOR THICKNESS/FINISH
WOOD VENEER SERIES
Page 001
Base:18mm thick MDF; front face or both faces coated with PU painted veneer
Base:18mm thick MDF; both faces coated with high-gloss PU painted veneer
9. Page 002
H
W
H
W
H
W
H
LACQUER SERIES
Page 003
YMK004
(J-26)
YMK005A
(J-35)
(R300)
YMK006
(YMK21)
W
H
YMK001
(J-T)
YMK005B
(J-35)
(W1200,
R660)
-For door panel:
W≤600mm and H≤1450mm
-For drawer front/flap door:
W≤1200 and H≤400mm
H
W
YMK002
(J-S)
DOOR
STYLE
PICTURE
DOOR DRAWER/ SIZE LIMITS/TECHNICS
ILLUSTRATION
BASE/FINISH
OPTIONAL FRAMED
GLASS DOOR
-Door thickness:19mm
-Front face or both faces
lacquered
YMB001
YMB005
YMB011
-For door panel:
W≤600mm and H≤1450mm
-For drawer front/flap door
W≤1200 and H≤400mm
-Optional bar handle:
PWMK001,PWMK003
-Door thickness:19mm
-Front face or both faces
lacquered
YMB001
YMB005
YMB011
-For door panel:
W≤600mm and H≤1450mm
-For drawer front/flap door
W≤1200 and H≤400mm
-Door thickness:22mm
-Front face or both faces
lacquered
YMB001
YMB005
YMB011
Straight edges
-Door thickness:19mm
-Front face or both faces
lacquered
NONE
-For door panel:
1098mm≤W≤1198mm and
360mm≤H≤500mm
-Handle:PWWL0053B
-Door thickness:22mm
-Front face or both faces
lacquered
NONE
-For door panel:
W≤600mm and H≤1450mm
-For drawer front/flap door
W≤1200 and H≤400mm
-Bar handle:PWWK007
-Door thickness:25mm
-Front face or both faces
lacquered
NONE
LACQUER SERIES
YMK009A
(YMK35)
A
B
YMK015
(YMK42)
YMK009B
(YMK36)
A
B
A
B
For door panel:
-When 265mm≤W≤600mm,
and 220mm≤H≤1450mm,
stile and rail width is 53mm.
-When 225mm≤W≤265mm,
rail width is 53mm and stile width is 33mm.
-When 120mm≤W≤225mm and
220mm≤H≤1450mm,or 120mm≤W≤600mm
and 120mm≤H≤220mm,door is flat,
grooved and edges routed.
-When W<120mm or H<120mm, door is
flat, edges routed.
For door panel:
-When 265mm≤W≤600mm,
and 220mm≤H≤1450mm,
stile and rail width is 53mm.
-When 225mm≤W≤265mm,rail width is 53mm
and stile width is 33mm.
-When 120mm≤W≤225mm and
220mm≤H≤1450mm,or 120mm≤W≤600mm
and 120mm≤H≤220mm, door is flat,
grooved and edges routed.
-When W<120mm or H<120mm,
door is flat, edges routed.
DOOR
STYLE
PICTURE
DOOR DRAWER/ SIZE LIMITS/TECHNICS
ILLUSTRATION
DOOR THICKNESS/FINISH
OPTIONAL FRAMED
GLASS DOOR
For drawer front/flap door:
-When 265mm≤W≤1200mm,
and 220mm≤H≤400mm,
stile and rail width is 53mm.
-When 265mm≤W≤1200mm,
rail width is 33mm and stile width is 53mm.
-When 120mm≤W≤265mm and
180mm≤H≤400mm,or 120mm≤W≤1200mm
and 80mm≤H≤180mm,door is flat,
grooved and edges routed.
-When W<120mm or H<80mm,
door is flat, edges routed.
-Door thickness:22mm
-Front face or both faces
matt lacquered.
-No paint lines except applying
finish PWMK2003
YMB001
YMB005
YMB011
For drawer front/flap door:
-When 265mm≤W≤1200mm,
and 220mm≤H≤400mm,
stile and rail width is 53mm.
-When 265mm≤W≤1200mm,
rail width is 33mm and stile width is 53mm.
-When 120mm≤W≤265mm and
180mm≤H≤400mm,or 120mm≤W≤1200mm
and 80mm≤H≤180mm,door is flat,
grooved and edges routed.
-When W<120mm or H<80mm,
door is flat, edges routed.
-Door thickness:22mm
-Front face or both faces
matt lacquered
-No paint lines
YMB001
YMB005
For door panel:
-When 290mm≤W≤600mm,
and 290mm≤H≤1450mm,door profile is shown
in the left diagram; stile and rail width is 61mm.
-When 230mm≤W≤290mm,
and 290mm≤H≤1450mm,rail width is 61mm
and stile width is 31mm.
-When 150mm≤W<230mm
and 290mm≤H≤1450mm,
or 150mm≤W≤600mm
and 210mm≤H<290mm,
rail width is 61mm and stile width is 31mm,
and core is flat.
-When W<150mm or H<210mm,
door is flat, edges routed.
For door panel:
-When 290mm≤W≤1200mm,
and 290mm≤H≤400mm,
stile and rail width is 61mm.
-When 290mm≤W≤120mm,
and 230mm≤H<290mm,stile width is 61mm
and rail width is 31mm.
-When 210mm≤W<290mm
and 230mm≤H≤400mm,
or 210mm≤W≤1200mm
and 150mm≤H<230mm,
stile width is 61mm and rail width is 31mm,
and core is flat.
-When W<210mm or H<150mm,
door is flat, edges routed.
-Door thickness:22mm
-Finish: PWMK1011
-Golden paint lines available
YMB001
YMB005
10. Page 004
LACQUER SERIES
Page 005
LACQUER SERIES
YMK019
(YMK46)
-If bar handle horizontally fixed:
296mm≤W≤600mm,
and 200mm≤H≤1450mm
-If bar handle vertically fixed:
296mm≤W≤1200mm,
and 200mm≤H≤400mm
-For drawer front/flap door:
296mm≤W≤1200mm,
and 200mm≤H≤400mm
-Bar handle:PWWK0030
YMK022
(YMK49)
YMK023
(YMK50)
YMK024
A(YMK
51A)
DOOR
STYLE
PICTURE
DOOR DRAWER/ SIZE LIMITS/TECHNICS
ILLUSTRATION
OPTIONAL FRAMED
GLASS DOOR
DOOR THICKNESS/FINISH
-Door thickness:25mm
-Front face or both
faces lacquered
NONE
For door/drawer front/flap door:
-When W≥98mm and H≥98mm,
door profile is same as the left diagram.
-When W<98mm or H<98mm,
door is 22mm thick flat panel,
with rounded edges.
-Door thickness:22mm
-Front face or both faces
lacquered
YMB001
YMB005
YMB011
For door/drawer front/flap door:
-When W≥158mm and H≥158mm,
door profile is same as the left diagram.
-When W<158mm or H<158mm,
door is 22mm thick flat panel,
with rounded edges.
-Door thickness:22mm
-Front face or both faces
lacquered
YMB001
YMB005
YMB011
For door/drawer front/flap door:
-When W≥174mm and H≥174mm,
door profile is same as the left diagram.
-When W<174mm or H<174mm,
door is 22mm thick flat panel, with
rounded edges.
-Door thickness:22mm
-Front face or both faces
lacquered
-Available finish:
PWMK1016,PWMK3007
YMB002
YMB011
YMK024
B(YMK
51B)
For door/drawer front/flap door:
-When W≥174mm and H≥174mm,
door profile is same as the left diagram;
frame is 22mm thick lacquered MDF
and core is 6mm thick HPL.
-When W<174mm and H<174mm,
door is flat with edges routed.
YMK026
YMK020
YMK103
DOOR
STYLE
PICTURE
DOOR DRAWER/ SIZE LIMITS/TECHNICS
ILLUSTRATION
OPTIONAL FRAMED
GLASS DOOR
DOOR THICKNESS/FINISH
-Door thickness:22mm
-Frame front face or both
faces matt lacquered
-Optional high gloss finishes:
PWMK1016,PWMK3007
YMK024A
For flap door:
-When W≥198mm and H≥356mm,
door profile is same as the left diagram.
-When W<198mm and H<356mm,
door is flat with rounded edges.
-Door thickness:38mm
-Front face or both faces
lacquered
NONE
For door/drawer front/flap door:
-When W≥130mm and H≥130mm,
door profile is same as the left diagram.
-When 60mm≤W<130mm
or 60mm≤H<130mm,
door is flat with edges routed.
-When W<60mm or H<60mm,
door is flat with rounded edges.
-No golden paint lines except
applying finishes PWMK2006,
PWMK2002.
-Door thickness:19mm
-Front face or both faces
lacquered
YMB001
YMB003
YMB005A
YMB011
YMB052A
For door/drawer front/flap door:
-When H≥147mm and W≥147mm,
door profile is same as the left diagram.
-45° edge cutting
-Edge R2 rounded
-Matching lacquered bar K60/K80
-Door thickness:19mm
-Front face or both faces
lacquered
YMB001
YMB011
R2
R2
11. Page 006
LACQUER SERIES
Page 007
LACQUER SERIES
Benley Auto Lacquer
PWMK4001(WBMK701) PWMK4002(WBMK702) PWMK4003(WBMK703)
PWMK3002(SG025)
Pearl Pigment Auto Lacquer
PWMK3006(SG010) PWMK3001(SG023) PWMK3004(WBMK407)
PWMK3007(WBMK410) PWMK3008(WBMK414)
PWMK5001(WBMK704) PWMK5002
PWMK3009(WBMK415) PWMK3010(WBMK417)
PWMK3011(WBMK418)
Metallic-Tones Auto Lacquer
PWMK1018(WBMK501) PWMK1019(WBMK502)
Lacquer Grade G
PWMK1046 PWMK2073
PWMK2074
Note: Only suitable for door style YMK001,YMK002
Base:18/21/25mm MDF Front face or both faces lacquered
Base:18/21/25mm MDF Front face or both faces lacquered
Base:18/21/25mm MDF Front face or both faces lacquered
Base:18mm MDF Front face lacquered
Matt Lacquer
PWMK2002(WBMK206) PWMK2003(WBMK208) PWMK2005(WBMK210)
PWMK2054PWMK2007(WBMK212) PWMK2008(WBMK213) PWMK2009(WBMK214)
PWMK2055 PWMK2056
PWMK2006(WBMK211)
PWMK1001(KQ008)
High Gloss Lacquer
PWMK1002(KQ009) PWMK1003(KQ015)
PWMK1011(WBMK126) PWMK1012(WBMK128) PWMK1014(WBMK130) PWMK1015(WBMK131)
PWMK1016(WBMK132) PWMK1017(WBMK133)
PWMK1008(WBMK120)
Base:18/21/25mm MDF Front face or both faces lacquered
Base:18/21/25mm MDF Front face or both faces lacquered
12. Page 008 Page 009
LACQUER SERIES LACQUER SERIES
Lacquered Decorative Accessories
NAME PICTURE/DIAGRAM SIZE
Moulding
Crown
CODE BASE/FINISH/TECHNICS
-Base:MDF
-Finish: PWMK2003
-Golden painting available
Max. L=2200mm/PC
YSL40A
(R897)
-Base: alder -Finish: lacquer
-Match range hood covers,
wall cabinets and high cabinets
Max. L=2300mm/PC
-Base: alder
-Finish: lacquer
-Match range hood cover YSH052 only
YSL034
(YSL34)
YSL040
(YSL40)
YSL076
-Base: MDF -Finish: lacquer
-Match wall cabinets, rang hood covers
and high cabinets
Decorative
Pillar
-Base: MDF/alder
-Finish: lacquer
D=22mm, W=150mm
YSZ015
(YSZ15)
25
50
R25
47
YSB013
(YSB13)
YSB014
(YSB14)
YSB031
(YSB48)
Decorative
Panel
YSB033
(YSB50)
-Base: MDF
-Finish: lacquer/PVC
-Base: MDF/alder
-Finish: lacquer
-Base: MDF -Finish: lacquer
-For wall cabinets/middle/high cabinets
Thickness=47mm
-Base: MDF -Finish: lacquer PWMK2003,
with golden portrays; no golden paint if
applying other matt finish.
YSB045
(YSB57A)
YSB046
(YSB57B)
YSB047
(YSB58)
-Base: MDF
-Finish: lacquer PWMK1011, with golden
portrays; for base cabinets.
W=80mm
-Base: MDF
-Finish: lacquer PWMK1011,with golden
paint; for wall cabinets.
-Base: MDF -Finish:lacquer
-For islands
W=900~924mm
H 880mm≤
YSB052
(YSB62)
-Base: MDF/alder
-Finish: lacquer
W=86mm
-Base: MDF/alder
-Finish: lacquer
-Base: MDF/alder
-Finish: lacquer
W=75mm
W=150mm
YSB053
(YSB63)
YSB054
(YSB64)
YSB058L
(YSB67L)
YSB058R
(YSB67R)
-Base: MDF
-Applied in model PLCC16117 only
YSB161
-Base:MDF
-Golden paint line available
when applying finish PWMK2006 only.
H
YSL005
(AL-15)
-Base: 38mm thick MDF
-Finish: lacquer
Max. L=2300mm/PC
(Rounded edge)
YSL006
(AL-16)
-Base: 38mm thick MDF
-Finish: lacquer
Max. L=2300mm/PC
W=50mm
Max. L=2300mm/PC
W=80mm
Decorative
shelf
D
38
YSG006
(ZDB-L)
-Base: MDF -Finish: lacquer
-Edges R8 rounded
Thickness=38mm
L=2300/PC
(Rounded)
R2
38
YSG013
(YSG13)
(Square)
-Base: MDF -Finish: lacquer
-Edges R2 rounded
Thickness=38mm
L=2300/PC
Decorative
Panel
50
H
YSB015
(YSB24)
-Base: MDF
-Finish: lacquer
Thickness=50mm
80 Thickness=80mm-Base: MDF
-Finish: lacquer
YSG003A(AC-02)
-Base: MDF
-Finish: lacquer
D=18mm,W=450mm,
H=283mm
YSG016
(YSG16)
D
38
YSD004
(ZDB-L)
Top panel
(Rounded)
-Base: MDF -Finish:lacquer
-Edges R8 rounded
Thickness=38mm
L=2300/PC
YSD016
(YSD16) R2
38
(Square)
-Base: MDF -Finish: lacquer
-Edges R2 rounded
D
YSD008
(YSD08)
-Base: MDF
-Finish: lacquer
NAME PICTURE/DIAGRAM SIZECODE BASE/FINISH/TECHNICS
Lacquered Decorative Accessories
Thickness=38mm
L=2300/PC
Thickness same as
door front thickness
60
30
K60
wooden bar
Lacquered Bar for Door Style YMK020 (handleless design)
Profile CodeProfile Code
Door thickness
=18/19/20mm
K60
-This bar matches door style
YMK020(door panel has 45°
cutting edges)
-Bar heigh:60mm
-Bar position:
in the cut-out of cabinet side
-Bar base and finish:
lacquered MDF
Door thickness
=18/19/20mm
K80
-This bar matches door style
YMK020(door panel
has 45° cutting edges)
-Bar heigh:80mm
-Bar position:
in the cut-out of cabinet side
-Bar base and finish:
lacquered MDF
80
30
K80
wooden bar
13. Page 010 Page 011
LACQUER SERIES
DOOR
STYLE
DRAWING
MATCHED
CABINET
DOOR SIZE
(MM)
1000
R2462
51.3D
R200R200
R300
R300
R320
100D
500
R362.5
R670
50
D
500
R650
φ814 φ1050
900
D80
R1305.5
R200 R300
R300 R362.5
R650 R650
R1040 R1305.5
R2462
φ814 φ1050
800
D80
R1040
H≤1420
H 800≤
R2211
DRAWING
Door
cabinet
R150
Corner
cabinet
Drawer
cabinet
229
380
700
R2211
R150
200
550
Door
cabinet/
drawer
cabinet
Drawer
cabinet
MATCHED
CABINET
H≤1390
Door
cabinet
H 1390≤
Door Finish: Lacquer
Door
cabinet
H≤1390
H 800≤
double-
door
corner
cabinet
H 800≤
H 800≤
H 700≤
DOOR SIZE
(MM)
DOOR
STYLE
Door
cabinet/
drawer
cabinet
H 800≤
Door
cabinet/
drawer
cabinet
Door
cabinet/
drawer
cabinet
Door
cabinet/
drawer
cabinet
Door
cabinet/
drawer
cabinet
Curved Doors
METHACRYLATE SERIES
YMR001
(YMR01)
YMR002
(YMR02)
-Bar handle:PWWK0001/PWWK003
-Edges same color as door front
YMR003
(YMR03)
YMR004
(YMR04)
Edges same color as door front
Edges same color as door front
Methacrylate Layer(PMMA+ABS), Grade E
PWMR0001(WBMR101)
Methacrylate Layer(PMMA+ABS), Grade F
PWMR0004(WBMR201) PWMR0005(WBMR202)
Base: 18mm thick plywood. Front face coated with methacrylate layer,
back face coated with white ABS deco paper
Base: 18mm thick plywood. Front face coated with methacrylate layer,
back face coated with white ABS deco paper
PWMR0002(WBMR106) PWMR0003(WBMR107)
PWMR0006(WBMR203)
PWMR0012(WBMR301) PWMR0013(WBMR302)
Methacrylate Layer(PMMA+ABS), Grade D Base: 18mm thick plywood. Double faces coated with methacrylate layer
PWMR0014(WBMR303)
PWMR0008(WBMR205)
PWMR0009(WBMR206) PWMR0010(WBMR207)
DOOR
STYLE
PICTURE
DOOR DRAWER/ SIZE LIMITS/TECHNICS
ILLUSTRATION
BASE/DOOR THICKNESS/
FINISH
OPTIONAL FRAMED
GLASS DOOR
-Base:18mm thick plywood
-Front face methacrylate
layer coated
-Door thickness:20mm
YMB006
YMB008
YMB011
-Base:18mm thick plywood
-Front face methacrylate
layer coated
-Door thickness:20mm
YMB006
YMB008
YMB011
-Base:18mm thick plywood
-Both faces methacrylate
layer coated
-Door thickness:20mm
YMB006
YMB008
YMB011
-Bar handle:PWWK0001/PWWK003
-Edges same color as door front
-Base:18mm thick particle
board
-Both faces methacrylate
layer coated
-Door thickness:20mm
YMB006
YMB008
YMB011
14. Page 012 Page 013
PWMR0011(WBMR401)
Methacrylate Layer(PMMA+ABS), Grade G Base: particle board. Front face coated with methacrylate layer,
back face coated with white ABS deco paper
Decorative Accessories
NAME PICTURE NOTES
Moulding
Crown
CODE BASE/FINISH/TECHNICS
H
YSL005
(AL-15)
-Base: MDF
-Coat: acrylic
-R15 corner radius
Thickness=34mm
Max.L=2300mm/PC
(Rounded edge)
YSL006
(AL-16)
-Base: MDF
-Coat: acrylic
-R2 corner radius
Thickness:34mm
Max.L=2300mm/PC
Decorative
Panel
YSB001
(YSB01)
-Base: plywood.
-Both faces coated with acrylic
Thickness=22mm
Decorative
shelf
YSG006
(ZDB-L)
-Base: 34mm thick acrylic
-Coat: acrylic
-R15 corner radius(Rounded)
R2
38
YSG013
(YSG13)
(Square)
-Base: MDF
-Coat: acrylic
-R2 corner radius
D
38
YSD004
(ZDB-L)
Top panel
(Rounded)
-Base: MDF
-Coat: acrylic
-R15 corner radius
YSD016
(YSD16) R2
38
-Base: particle board
-Coat: acrylic
-R2 corner radius(Square)
UV LACQUER SERIES
H
W
H
W
H
W
W
H
UV Lacquer Grade D Base: 18mm thick MDF
YMC001
(A-LA)
YMC002
(A-SL)
YMC003
(YMC03)
YMC004
(YMC04)
4 edges sealed with aluminum
edge band PWFL0001
PWMC0003(WBMC12)
YMC005
H
W
PWMC0012 PWMC0013 PWMC0014
PWMC0005(WBMC14) PWMC0006(WBMC15)
UV Lacquer Grade G
PWMC0007(WBMC16) PWMC0008(WBMC17)
PWMC0009 PWMC0010 PWMC0011
DOOR
STYLE
PICTURE
DOOR DRAWER/ SIZE LIMITS/TECHNICS
ILLUSTRATION
DOOR THICKNESS/FINISH
OPTIONAL FRAMED
GLASS DOOR
Thickness=34mm
Max. L=2100mm/PC
D
H
Thickness=34mm
Max. L=2300mm/PC
Thickness=34mm
Max. L=2100mm/PC
Thickness=34mm
Max. L=2300mm/PC
-Base: MDF
-Door thickness: 22mm
-Front face lacquered
YMB006
YMB008
YMB011
-Aluminum bar handle: PWWK0001
-Other edges sealed with aluminum
edge band PWFL0001
-Base: MDF
-Door thickness: 22mm
-Front face lacquered
YMB006
YMB008
YMB011
2mm thick PVC edging
-Base: MDF
-Door thickness:19mm
-Front face lacquered
YMB006
YMB008
YMB011
-Aluminum bar handle:
PWWK0001,PWWK0003
-Other edges sealed with PVC
-Base: MDF
-Door thickness:19mm
-Front face lacquered
YMB006
YMB008
YMB011
ABS edging
-Base: MDF
-Door thickness: 19mm
-Front face lacquered
YMB006
YMB008
YMB011
Coat: UV lacquer on front face;white melamine on back face
Base: 18mm thick MDF Coat: UV lacquer on front face;white melamine on back face
METHACRYLATE SERIES
15. Page 014 Page 015
W
H
W
H
W
H
H
W
W
H
H
W
Notes: not all door styles can be high-gloss PVC pressed. Only those door styles marked with * can match both high-gloss and non high-gloss PVC.
-For door:
98mm≤W≤650mm,
and 140mm≤H≤1450mm
-For drawer front/flap door:
98mm≤W≤1200mm,
and 140mm≤H≤600mm
-Door is flat, when 20mm≤W≤98
and 97mm≤H≤2400mm.
-Drawer front/flap door is flat,
when 20mm≤H<140mm
and 98mm≤W≤2400mm.
YMG001
(P-M)
YMG002
(P-Z *)
YMG004
(P-01)
YMG005
(P-02)*
W
H
H
W
①
W
H
YMG006
(P-06)
YMG007
(P-08)*
YMG008A
(P-09A)
Notes: not all door styles can be high-gloss PVC pressed. Only those door styles marked with * can match both high-gloss and non high-gloss PVC.
②
DOOR
STYLE
PICTURE
DOOR DRAWER/ SIZE LIMITS/TECHNICS
ILLUSTRATION
DOOR THICKNESS/FINISH
OPTIONAL FRAMED
GLASS DOOR
DOOR
STYLE
PICTURE
DOOR DRAWER/ SIZE LIMITS/TECHNICS
ILLUSTRATION
OPTIONAL FRAMED
GLASS DOOR
-Door thickness:19mm.
-Front face coated
with PVC foil.
NONE
-For door:
98mm≤W≤650mm,
and 98mm≤H≤1450mm.
-For drawer front/flap door:
98mm≤W≤1200mm,
and 98mm≤H≤600mm.
-Door is flat, when 20mm≤W≤98
and 97mm≤H≤2400mm.
-Drawer front/flap door is flat,
when 20mm≤H<140mm
and 98mm≤W≤2400mm.
-Door thickness:19mm.
-Front face coated
with PVC foil.
YMB001
YMB003
YMB005
YMB011
YMB012
For door:
-When 145mm≤W≤650mm,
door profile is same as the left diagram.
-When 145mm≤W<210mm and
230mm≤H≤1450mm,corners are rounded.
-When 210mm≤W≤650mm and
230mm≤H≤1450mm, corners are square.
-When 30mm≤W<145mm and
97mm≤H≤2400mm, door is flat, edges
.routed
-Door thickness:19mm.
-Front face coated
with PVC foil.
YMB001
YMB003
YMB005
YMB011
YMB012For drawer front/flap door:
-When 145mm≤H≤600mm,
drawer front and flap door profile is same
as the left diagram.
-When 145mm≤H<210mm
and 230mm≤W≤1200mm,
corners are rounded.
-When 210mm≤H≤600mm and
248mm≤W≤1200mm,corners are square.
-When 30mm≤H<145mm and
98mm≤W≤2400mm,door is flat,
edges routed.
For door:
-When 145mm≤W≤650mm,
door pattern is shown in the left diagram.
-When 145mm≤W<210mm
and 230mm≤H≤1450mm,
corners are rounded.
-When 210mm≤W≤650mm
and 230mm≤H≤1450mm,
corners are square.
-When 30mm≤W<145mm
and 97mm≤H≤2400mm,door is flat,
edges routed.
For drawer front/flap door:
-When 145mm≤H≤600mm,
drawer front and flap door pattern is
shown in the left diagram.
-When 145mm≤H<210mm
and 230mm≤W≤1200mm,
corners are rounded.
-When 210mm≤H≤600mm
and 248mm≤W≤1200mm,
corners are square.
-When 30mm≤H<145mm
and 98mm≤W≤2400mm,
door is flat, edges routed.
-Door thickness:19mm.
-Front face coated
with PVC foil.
YMB001
YMB003
YMB005
YMB011
YMB012
For door:
-When 275mm≤W≤650mm
and 275mm≤H≤1450mm,
door profile is same as
the left diagram ①.
-When 145mm≤W<275mm
and 275mm≤H≤1450mm,
door profile is same as
the left diagram ②.
-When 30mm≤W<145mm
and 97mm≤H≤2400mm,
door is flat, edges routed. -Door thickness:19mm
-Front face coated
with PVC foil
YMB001
YMB003
YMB005
YMB012
DOOR THICKNESS/FINISH
For drawer front/flap door:
-When 275mm≤H≤600mm
and 275mm≤W≤600mm,
drawer front and flap door profile
is same as the left diagram ③.
-When 145mm≤H<275mm
and 275mm≤W≤600mm,
drawer and flap door profile
is same as the left diagram ④.
-When 30mm≤H<145mm
and 98mm≤W≤2400mm,
door is flat, edges routed.
-For door:
298mm≤W≤650mm,
and 115mm≤H≤1450mm.
-For drawer front/flap door:
298mm≤W≤1200mm,
and 115mm≤H≤600mm.
-Bar handle: PWWL0013
-Door thickness:22mm
-Front face coated
with PVC foil
NONE
For door:
-When 210mm≤W≤650mm
and 230mm≤H≤1450mm,
door profile is same as
the left diagram ①.
-When 170mm≤W<210mm
and 230mm≤H≤1450mm, door
profile is same as the left diagram ②.
-When 29mm≤W<170mm,
door is flat, edges routed.
For drawer front/flap door:
-When 210mm≤H≤600mm
and 230mm≤W≤1200mm,
drawer front and flap door profile
is same as the left diagram ①.
-When 170mm≤H<210mm
and 230mm≤W≤1200mm,
drawer front and flap door profile
is same as the left diagram ②.
-When 29mm≤H<170mm,
door is flat, edges routed.
-Door thickness:22mm.
-Available finish:
PWMG0010
PWMG0012
PWMG0014
PWMG0015
-Front face coated
with PVC foil.
YMB001
YMB002
YMB003
YMB005
YMB011
YMB012
YMB031
PVC FOIL SERIES PVC FOIL SERIES
16. Page 016 Page 017
H
W
①
W
H
H
W
YMG009B
(P-29B)
H
W
W
H
YMG010
(P-30)
Notes: not all door styles can be high-gloss PVC coated; only door styles marked with * can match both high-gloss and non high-gloss PVC.
H
H
W
YMG015
(YMG39)
Notes: not all door styles can be high-gloss PVC pressed; only those door styles marked with * can match both high-gloss and non high-gloss PVC.
YMG018
(YMG45)
YMG019
(YMG46)
②
③
For door:
-When 297mm≤W≤650mm
and 297mm≤H≤1450mm,door profile
is same as the left diagram ①;
and D1=D2=D3=50mm.
-When 256mm≤W<297mm
and 256mm≤H≤1450mm,
door profile is same as the left diagram ②;
and D1=50mm, D2=D3=35mm,
-When 20mm≤W<158mm,
door is flat, edges routed.
①
②
YMG020
(YMG47)
DOOR
STYLE
PICTURE
DOOR DRAWER/ SIZE LIMITS/TECHNICS
ILLUSTRATION
OPTIONAL FRAMED
GLASS DOOR
DOOR
STYLE
PICTURE
DOOR DRAWER/ SIZE LIMITS/TECHNICS
ILLUSTRATION
OPTIONAL FRAMED
GLASS DOOR
DOOR THICKNESS/FINISH DOOR THICKNESS/FINISH
-Door thickness:22mm
-Available PVC foil:
PWMG0010
PWMG0012
PWMG0014
PWMG0015
-Front face coated with PVC foil
YMB001
YMB002
YMB003
YMB005
YMB011
YMB012
YMB031
For drawer front/flap door:
-When 297≤H≤600mm and
297mm≤W≤1200mm, drawer front and
flap door profile is same as the left
diagram ①.
-When 256mm≤H<297mm
and 256mm≤W≤1200mm,
drawer front and flap door profile is same
as the left diagram ②.
-When 158mm≤H<256mm
and 188mm≤W≤1200mm,
drawer front and flap door pattern is same
as the left diagram ③.
-When 30mm≤H<158mm
and 98mm≤W≤2400mm,
drawer front and flap door is flat,
edges routed.
For door:
-When 256mm≤W≤650mm and
256mm≤H≤1450mm,door profile
is same as the left diagram ①,
and D1=D2=55mm,D3=35mm.
-When 200mm≤W<256mm
and 256mm≤H≤1450mm,
door profile is same as the left diagram ②;
and D1=D2=55,D3=35.
-When 158mm≤W<200mm
and 256mm≤H≤1450mm,
door profile is same as the left diagram ②;
and D1=55,D2=45,D3=35.
-When 20mm≤W<158mm,
door is flat, edges routed.
For drawer front/flap door:
-When 256mm≤H≤600mm and
256mm≤W≤1200mm,door profile
is same as the left diagram ①;
and D1=D2=55mm, D3=46mm.
-When 200mm≤H<256mm
and 256mm≤W≤1200mm,
door profile is same as the left diagram ②;
and D1=D2=55mm,D3=35mm.
-When 158mm≤H<200mm
and 256mm≤W≤1200mm,
door profile is same as the left diagram ②;
and D1=45mm,D2=55mm and D3=35mm.
-When 30mm≤H<158mm and
98mm≤W≤2400mm, door is flat,
edges routed.
-Door thickness:22mm
-Available PVC foil:
PWMG0010
PWMG0012
PWMG0014
PWMG0015
-Front face coated with PVC foil
YMB001
YMB002
YMB003
YMB005
YMB011
YMB012
YMB031
For door:
-When 198mm≤W≤650mm and
197mm≤H≤1450mm,door profile is
same as the left diagram;
and D1=D2=80mm.
-When 20mm≤W<198mmm
and 97mm≤H≤2400mm,
door is flat, corner rounded.
For drawer front/flap door:
-When 197mm≤H≤600mm and
198mm≤W≤1200mm,
door profile is same as the left diagram;
and D1=D2=80mm.
-When 20mm≤H<197mmm
and 98mm≤W≤2400mm,
drawer and flap door is flat,
corner rounded.
-Door thickness:23mm.
-Front face coated with PVC foil
YMB001
YMB003
YMB005
YMB012
For door:
-When 198mm≤W≤650mm and
158mm≤H≤1450mm,door profile is
same as the left diagram.
-When 20mm≤W<198mmm
and 97mm≤H≤2400mm, door is
flat, corner rounded.
For drawer front/flap door:
-When 158mm≤H≤600mm and
198mm≤W≤1200mm,door profile
is same as the left diagram.
-When 20mm≤H<158mmm
and 98mm≤W≤2400mm,
drawer and flap door is flat,
corner rounded.
-Door thickness:23mm
-Front face coated
with PVC foil
YMB001
YMB002
YMB003
YMB005
YMB012
YMB031
For door:
-When 98mm≤W≤650mm
and 98mm≤H≤1450mm, door profile
is same as the left diagram.
-When 20mm≤W<98mmm
and 97mm≤H≤2400mm,
door is flat, corner rounded.
For drawer front/flap door:
When 98mm≤H≤600mm,
98mm≤W≤1200mm, door pattern is
shown in the left diagram.
When 20mm≤H<98mmm
and 98mm≤W≤2400mm,
drawer front and flap door is flat,
corner rounded.
-Door thickness:22mm
-Front face coated
with PVC foil
-High gloss PVC does
not match this door style.
YMB001
YMB003
YMB005
YMB011
YMB012
For door:
-When 248mm≤W≤650mm and
248mm≤H≤1450mm,door profile
is same as the left diagram ①;
and D1=D2=D3=50mm.
-When 230mm≤W<248mm
and 248mm≤H≤1450mm, door profile
is same as the left diagram ②; and
D1=D2=D3=50mm.
-When 210mm≤W<230mm
and 248mm≤H≤1450mm,
door profile is same as the left diagram ③;
and D1=D3=50mm,D2=40mm.
-When 160mm≤W<210mm
and 248mm≤H≤1450mm,
door profile is same as the left diagram ③;
and D1=50mm,D2=D3=35mm.
-When 145mm≤W<160mm
and 248mm≤H≤1450mm,door profile
is same as the left diagram ③;
and D1=50mm,D2=25, D3=35mm.
-When 20mm≤W<145mm,
door is flat, edges routed.
For drawer front/flap door:
-When 248mm≤H≤600mm and
248mm≤H≤1200mm,door profile
is same as the left diagram ①;
and D1=D2=D3=50mm.
-When 230mm≤H<248mm
and 248mm≤W≤1200mm, door profile
is same as the left diagram ②;
and D1=D2=D3=50mm.
-When 210mm≤H<230mm
and 248mm≤W≤1200mm, door profile
is same as the left diagram ③;
and D1=40mm, D2=D3=50mm.
-When 160mm≤H<210mm
and 248mm≤H≤1200mm, door profile
is same as the left diagram ③;
and D2=50mm, D1=D3=35mm.
-When 145mm≤W<160mm
and 248mm≤H≤1200mm,door pattern
is shown in the left diagram 3.
And D1=25mm,D2=50,D3=35mm.
-When 30mm≤H<145mm
and 98mm≤W≤2400mm, door is flat,
edges routed.
-Door thickness:19mm
-Front face coated
with PVC foil
YMB001
YMB003
YMB005
YMB011
YMB012
YMB015
YMB026
PVC FOIL SERIESPVC FOIL SERIES
①
②
③
17. Page 018 Page 019
Notes: not all door styles can be high-gloss PVC coated; only door styles marked with * can match both high-gloss and non high-gloss PVC.
YMG022
(YMG49)
YMG023
(YMG50)
YMG024
(YMG51)
YMG025A
(YMG52A)
D/E
D
YMG027
(YMG54)
YMG058
DOOR
STYLE
PICTURE
DOOR DRAWER/ SIZE LIMITS/TECHNICS
ILLUSTRATION
BASE/DOOR THICKNESS/
FINISH
OPTIONAL FRAMED
GLASS DOOR
DOOR
STYLE
PICTURE
DOOR DRAWER/ SIZE LIMITS/TECHNICS
ILLUSTRATION
OPTIONAL FRAMED
GLASS DOOR
PVC FOIL SERIES PVC FOIL SERIES
For door:
-When 198mm≤W≤650mm and
198mm≤H≤1450mm, door profile is
same as the left diagram; frame is 18mm
thick MDF and core is 5mm thick MDF.
-When 20mm≤W<198mmm and
97mm≤H≤2400mm,door is flat,
corner rounded.
For drawer front/flap door:
-When 198mm≤H≤600mm and
198mm≤W≤1200mm, door
the left diagram; frame is 18mm
thick MDF and core is 5mm thick MDF.
-When 20mm≤H<198mmm and
98mm≤W≤2400mm,drawer front and
flap door is flat, corner rounded.
profile is
same as
-Door thickness:23mm
-Front face coated with PVC foil
-This door style does not match
high gloss PVC foil.
YMB001
YMB002
YMB003
YMB012
YMB031
BASE/DOOR THICKNESS/
FINISH
For door:
-When 258mm≤W≤650mm
and 258mm≤H≤1450mm,door
the left diagram ①.
(frame is 18 thick MDF and core is 5mm
thick MDF)When 198mm≤W<258mmm
and 258mm≤H≤1450mm, door
the left diagram ②.
(frame is 18 thick MDF and core is 5mm
thick MDF)
When 20mm≤W<198mm and
97mm≤H≤2400mm,door is flat,
corners rounded.
profile is
same as
profile
is same as
For drawer front/flap door:
-When 258mm≤H≤600mm and
258mm≤W≤1200mm,door
the left diagram ①;frame is
18mm thick MDF and core is 5mm
thick MDF.
-When 198mm≤H<258mmm
and 258mm≤W≤1200mm,door
the left diagram ②; frame is
18mm thick MDF and core is 5mm
thick MDF.
-When 20mm≤W<198mm and
98mm≤H≤2400mm,door is flat,
corners rounded.
profile is
same as
profile
is same as
-Door thickness:23mm
-Front face coated with PVC foil
-This door style does not match
high gloss PVC foil.
YMB001
YMB002
YMB003
YMB012
YMB031
For door/drawer front/flap door:
-Door base is 18mm thick and 3mm
thick MDF,then glued and fixed together.
-Door thickness:22mm
-Front face coated with PVC foil
-for choosing high gloss PVC for
wooden framed glass door, only
PWMG0024 is optional.
YMB001
YMB003
YMB005
YMB012
For door:
-When 198mm≤W≤650mm
and 198mm≤H≤1450mm,door
the left diagram; frame is 18mm
thick MDF and core is 5mm thick MDF.
-When 20mm≤W<198mmm and
97mm≤H≤2400mm,door is flat,
corner rounded.
profile is
same as
-Door thickness:23mm
-Front face coated with PVC foil
-This door style does not match
high gloss PVC foil.
YMB001
YMB002
YMB003
YMB005
YMB012
YMB031For drawer front/flap door:
-When 198mm≤H≤600mm
and 198mm≤W≤1200mm,door profile
is same as the left diagram; frame is
18 thick MDF and core is 5mm thick MDF.
-When 20mm≤H<198mmm and
98mm≤W≤2400mm, drawer front and
flap door is flat, corner rounded.
-Door thickness:23mm
-Front face coated with PVC foil
-This door style does not match
high gloss PVC foil.
YMB001
YMB003
YMB005
YMB012
For door:
-When 166mm≤W<198mmm
and 166mm≤H≤1450mm,D=E=25mm.
-When 198mm≤W<248mm
and 198mm≤H≤1450mm,D=E=35mm.
-When 248mm≤W≤650mm
and 248mm≤H≤1450mm,D=E=55mm.
-When 20mm≤W<166mm
and 97mm≤H≤2400mm,door is flat,
edges routed.
For drawer front/flap door:
-When 166mm≤H<198mmm
and 166mm≤W<198mm,D=E=25mm.
-When 166mm≤H<198mm
and 198mm≤W<248mm,
D=25mm and E=35mm.
-When 166mm≤H<198mm
and 248mm≤H≤1200mm,
D=25mm and E=55mm.
-When 248mm≤H≤600mm
and 248mm≤W≤1200mm,D=E=55mm.
-When 19mm≤H<166mm
and 98mm≤W≤2400mm,door is flat,
edges routed.
For door:
When 148mm≤W≤650mm
and 148mm≤H≤1450mm,door pattern
is shown in the left diagram.
When 20mm≤W<148mm
and 20mm≤H<148mm,door is flat,
corner rounded.
Door structure:core is 9mm thick MDF,
and frame is 18mm thick MDF;
core and frame are glued together.
For drawer front/flap door:
-When 148mm≤W≤1200mm
and 148mm≤H≤600mm,drawer front/flap
door profile is same as the left diagram.
-When 20mm≤W<148mm
and 20mm≤H≤600mm,door is flat,
corner rounded.
-Drawer front/flap door structure:
core is 9mm thick MDF, and frame is
18mm thick MDF; core and frame are
glued together.
-Door thickness:25mm
-Front face coated with PVC foil
-This door style does not match
high gloss PVC foil.
YMB001
YMB002
YMB003
YMB005
YMB012
YMB031
18. Page 020 Page 021
PP FOIL SERIES PP FOIL SERIES
YMD007
(YMD12)
YMD009
(YMD14)
YMD011
(YMD16)
YMD012A
(YMD17A)
YMD012B
(YMD17B)
YMD027
DOOR
STYLE
PICTURE
DOOR DRAWER/ SIZE LIMITS/TECHNICS
ILLUSTRATION
BASE/DOOR THICKNESS/
FINISH
OPTIONAL FRAMED
GLASS DOOR
DOOR
STYLE
PICTURE
DOOR DRAWER/ SIZE LIMITS/TECHNICS
ILLUSTRATION
OPTIONAL FRAMED
GLASS DOOR
For door/drawer front/flap door:
-When W≥248mm and H≥248mm,
frame width is 70mm;core panel is
12mm thick raised MDF.
-When 158mm≤W<248mm
or 158mm≤H<248mm, frame width is
70mm;core panel is 5mm thick MDF.
-When W<158mm or H<158mm,
door/drawer front/flap door is flat.
BASE/DOOR THICKNESS/
FINISH
-Door thickness:22mm
-Optional PP foil:PWMD0005
-Both faces wrapped with PP
-Distressed when applying
PP foil PWMD0005
YMB001
YMB002
YMB003
YMB005
For door:
-When W≥238mm and H≥238mm,
frame width is 80mm;core panel is
and door profile is same as the
left diagram.
-When 168mm≤W<238mm
or 168mm≤H<238mm, frame width is
80mm;core panel is 5mm thick flat MDF.
-When W<168mm or H<168mm,
door is flat.
raised
-Door thickness:22mm
-Optional PP foil:
PWMD0004,PWMD0009
-Both faces wrapped with PP
-Distressed when applying
PP foil PWMD0009
YMB001
YMB002
YMB003
YMB005
YMB028
For drawer front /flap door:
-When W≥238mm and H≥238mm,
frame width is 80mm;core panel is
and door pattern is same as
the left diagram.
-When 168mm≤W<238mm
or 168mm≤H<238mm,frame width is
80mm; core panel is 5mm thick flat MDF.
-When W<168mm or H<168mm,
drawer front/flap door is flat.
raised
For door/drawer front/flap door:
-When W≥148mm and H≥148mm,
door/drawer front/flap door, profile is
same as the left diagram.
-When W<148mm or H<148mm,
door/drawer front/flap door is flat.
-Frame is 23mm thick MDF and core is
9mm thick MDF.
-Door thickness:23mm
-Optional PP foils:
PWMD0013,PWMD0001
-Both faces wrapped with PP
-Distressed when applying
PP foil PWMD0009
YMB001
YMB003
YMB005
-Door thickness:23mm
-Optional PP foil:
PWMD0013,PWMD0001
-Both faces wrapped with PP
-Distressed when applying
PP foil PWMD0009
YMB001
YMB003
YMB005
For door/drawer front/flap door:
-When W≥248mm and H≥184mm,
door/drawer front/flap door, door profile
is same as the left diagram.
-When W<248mm or H<184mm,
door/drawer front/flap door is 25mm
thick flat MDF.
-Frame width is 23mm thick MDF;
core is 9mm thick MDF; rail width is
25mm and stile width is 100mm.
-Door thickness:25mm
-Optional PP foil:PWMD0012
-Both faces wrapped with PP.
NONE
For sliding door/drawer front:
-Frame is made of aluminum;
aluminum stile width is 100mm and rail
width is 60mm.
-Core is 9mm thick MDF.
-Available sliding door size:
248mm≤W≤1002mm
and 184mm≤H≤2200mm.
-Available drawer front size:
248mm≤W≤1200mm
and 184mm≤H≤600mm.
-This door style does not match hinges,
so it is used as sliding door or
drawer front only.
-Door thickness:25mm
-Optional PP foil:PWMD0045
-Both faces wrapped with PP
YMB001
YMB002
YMB003
YMB005
For door/drawer front/flap door:
-When W≥198mm and H≥159mm,
door profile is same as the left picture;
frame width is 70mm and core is jointed
by routed MDF.
-When W<198mm or H<159mm,
door/drawer front/flap door is flat.
19. Page 022 Page 023
PVC/PP SERIES
PWMG0001(G004) High gloss
PWMG0024(WBMG245)
PWMG0010(1404043)
PWMG0018(WBMG239)
PVC Foil Grade A
PVC Foil Grade D
Base: 18/21/25mm thick MDF; front face coated with PVC foil, back face coated with white melamine
Base: 18/21/25mm thick MDF; front face coated with PVC foil, back face coated with white melamine
PWMG0013(G027) PWMG0015(G032) PWMG0016(WBMG225)
PWMG0019(WBMG240)PWMG0017(WBMG227)
PWMG0025(WBMG246) PWMG0026(WBMG247) PWMG0027(WBMG248)
YMD028
YMD029
PWMG0054(WBMG701)
PVC Foil Grade E Base: 18mm thick MDF; front face coated with PVC foil, back face coated with white melamine
PWMG0059(WBMG709)
PWMG0057(WBMG707) PWMG0058(WBMG708)PWMG0056(WBMG706)
PWMG0060(WBMG710) PWMG0061(WBMG711) PWMG0062(WBMG712)
PWMG0063(WBMG713) PWMG0064(WBMG714) PWMG0102 PWMG0105
DOOR
STYLE
PICTURE
DOOR DRAWER/ SIZE LIMITS/TECHNICS
ILLUSTRATION
BASE/DOOR THICKNESS/
FINISH
OPTIONAL FRAMED
GLASS DOOR
PP FOIL SERIES
For door/drawer front/flap door:
-This door style has grooved handle;
for base cabinets/drawer fronts/
downward-opening flap doors, handles
are on the top; for wall cabinets/upward-
opening flap doors, handles are on
the bottom.
-When W≥198mm and H≥158mm,
door/drawer front/flap door profile is
same as the left diagram;
core is 9mm flat MDF.
-When W<198mm or H<158mm,
door/drawer front/flap door is flat MDF.
-Door thickness:22mm
-Optional PP foil:PWMD0046,
PWMD0047
-Both faces wrapped with PP
NONE
For door/drawer front/flap door:
-When W≥238mm and H≥238mm,
frame width is 70mm;core is raised.
-When 158mm≤W<238mm
or 158mm≤H<238mm, frame width
is 70mm;core is flat.
-When W<158mm or H<158mm,
door/drawer front/flap door is flat MDF.
-Door thickness:22mm
-Optional PP foil:PWMD0048,
PWMD0049
-Both faces wrapped with PP
YMB001
YMB003
YMB005
20. Page 024
PVC/PP SERIES
Page 025
PP Foil Grade G
PWMD0008(WBMD203)
PWMD0002(WBMD106) PWMD0004(WBMD108)
PP Foil Grade D Base: 21/25mm thick MDF; frame and core structure; both faces wrapped with PPfoil
PWMD0005(WBMD109)
PWMD0010(WBMD205)PWMD0009(WBMD204) PWMD0011(WBMD206)
PWMD0012(WBMD207) PWMD0013(WBMD208) PWMD0048
PWMD0049
PWMD0046
PWMD0047
PWMD0045
PVC/PP SERIES
Decorative Accessories
NAME PICTURE/DIAGRAM SIZECODE BASE/FINISH/TECHNICS
83
70
60
Moulding
YSL015
(AL-14)
YSL016
(AL-20)
Crown
110110
YSL013
(AL-08)
YSL014
(AL-09)
-Base: MDF block/solid wood moldings
-PVC foil coated
L=2300mm/PC
YSL026
(YSL26)
YSL038
(YSL38)
YSL077
Decorative
Pillar W=60mm
YSZ012
(YSZ12)
Decorative
panel/trim
YSB049
(YSB60A)
YSB050
(YSB60B)
YSB051
(YSB61)
W=50mm
Thickness=30mm
W
D
YSB019
(YSB36)
Thickness=18/22/25mm
Thickness=50mm
YSB008
(AB07)
50
YSB009
(AB08)
YSB011
(AB10)
Thickness=50mm
Thickness=50mm
YSB055
(YSB65)
YSB018
(YSB29)
YSB056
(YSB66A)
PWMG0029(G043) High gloss
PVC Foil Grade G Base: 18mm thick MDF; front face coated with PVC foil, back face coated with white melamine
PWMG0034(G020)
PWMG0038(WBMG414)
PWMG0031(35302) PWMG0037(WBMG413)
PWMG0104
-Base: MDF block/solid wood moldings
-PVC foil coated
L=2300mm/PC
-Base: MDF
-PVC foil coated
L=2300mm/PC
-Base: MDF
-PVC foil coated
L=2300mm/PC
-Base: MDF
-PVC/PP foil coated
L=2300mm/PC
-Base:MDF
-PP foil PWMD0001 coated, with golden
paint
L=2300mm/PC
-Base: MDF
-PVC/PP foil coated
L=2300mm/PC
-PP foil coated MDF and painted
-with solid wood carving and golden paint
-Base: MDF
-PVC foil coated
-Base: MDF
-PVC foil coated
(high gloss PVC excluded)
-Base: MDF
-PVC foil coated
-Base: MDF
-PVC/PP foil coated
-Base: MDF
-PVC foil coated
(high gloss PVC does not match
this door style, except PWMG0019)
-Base: MDF
-PVC foil coated
-Base: MDF
-PVC foil coated
(high gloss PVC foil excluded)
-Base: MDF
-PVC foil coated
Base: 21/25mm thick MDF; frame and core structure; both faces wrapped with PP foil
21. Page 026
PVC/PP SERIES
Page 027
HIGH PRESSURE LAMINATE SERIES
H
W
H
W
W
H
H
W
-Door thickness:19mm,
-Front face or both faces
laminated
YMF001
(F-F)
YMF002
(F-S)
YMF003
(F-LA)
YMF004
(F-SL)
Decorative Accessories
NAME PICTURE/DIAGRAM SIZECODE BASE/FINISH/TECHNICS
Decorative
panel/trim
YSB063
(YSB70A)
YSB064
(YSB70B)
YSB065
(YSB71)
-Base: MDF
-PVC foil coated
(high gloss PVC excluded)
-Base: MDF
-PVC foil coated
YSB057
(YSB66B)
80
50
YSB027
(YSB43)
-Base: MDF
-PP foil wrapped
Decorative
shelf
YSG022
(YSG22)
Thickness=25mm
28
50
28
50
YSR009
(AR-03)
YSR010
(AR-08)
YSR011
(AR-11)
-Structure: solid wood molding
attached to MDF
-PVC foil coated
Thickness=50mm
-Structure: red oak molding
attached to MDF
-PVC foil coated
Thickness=50mm
-Base: MDF
-PVC foil coated with paint lines.
Thickness=50mm
Light
cornice
Laminate Grade D Base: 18mm thick particle board. Finish: front face coated with grade D laminate, back face coated with white laminate;
or both faces coated with grade D laminate.
PWMF0019(WBMF425) PWMF0020(WBMF427) PWMF0021(WBMF309)
PWMF0022(WBMF310)
PWMF0012(WBMF428)
DOOR
STYLE
PICTURE
DOOR DRAWER/ SIZE LIMITS/TECHNICS
ILLUSTRATION
BASE/DOOR THICKNESS/
FINISH
OPTIONAL FRAMED
GLASS DOOR
-Base: MDF
-PVC foil coated
-Base: MDF
-PVC foil coated
-Base: MDF
-PVC foil coated.
YSG013
YMB006
YMB008
YMB011
-Door thickness:19mm,
-Front face or both faces
laminated
YMB006
YMB008
YMB011
-Bar handle: PWWK0001
-3 edges sealed with PVC
-Door thickness:19mm,
-Front face or both faces
laminated
YMB006
YMB008
YMB011
Edges sealed with Aluminum
band PWFL0001
-Door thickness:19mm,
-Front face or both faces
laminated
YMB006
YMB008
YMB011
-Bar handle: PWWK0001/
PWWK0003
3 edges sealed with PVC-
-Base: MDF
-PVC foil coated.
Thickness=38mmR2
38
22. Page 028 Page 029
HIGH PRESSURE LAMINATE SERIES
PWMF0003(300)
Laminate Grade G Base:18mm thick particle board. Finish: front face coated with grade D laminate, back face coated with white laminate;
or both faces coated with grade D laminate.
PWMF0001(6661) PWMF0004(WBMF412) PWMF0005(WBMF413)
PWMF0009(WBMF423) PWMF0011(WBMF426) PWMF0015(WBMF431) PWMF0016(WBMF432)
PWMF0017(WBMF433) PWMF0047 PWMF0048
MATERIAL CODE NOTES
Laminates
Grade D
PWMF0019
(WBMF425)
19*2440*1220
PWMF0020
(WBMF427)
19*2440*1220
PWMF0021
(WBMF309)
19*2440*1220
PWMF0022
(WBMF310)
19*2440*1220
PWMF0012
(WBMF428)
19*2440*1220
Laminates
Grade G
PWMF0004
(WBMF412)
19*2440*1220
PWMF0015
(WBMF431)
19*2440*1220
PWMF0016
(WBMF432)
19*2440*1220
PWMF0008
(WBMF422)
19*2440*1220
PWMF0048 19*2440*1220
2440
1220
H
WA
B
2440
H
WA
B
1220
2440
H
WA
B
1220
2440
H
WA
B
1220
2440
H
WA
B
1220
2440
H
WA
B
1220
2440
H
WA
B
1220
2440
H
WA
B
1220
2440
H
WA
B
1220
2440
H
WA
B
1220
HIGH PRESSURE LAMINATE SERIES
Grain Direction for HPL Doors And Drawers
STANDARD SHEET
SIZE(D*L*W)
GRAIN DIAGRAM OF PLAIN BOARD
A represents door, B represents standard sheet.
GRAIN DIRECTION
FOR DOOR FRONTS
GRAIN DIRECTION FOR
DRAWER FRONT
AND FLAP DOOR
Horiziontal Horiziontal
Vertical Horiziontal
Vertical
Vertical
Vertical
Vertical
Vertical
Vertical
Vertical
Vertical
Horiziontal
Horiziontal
Horiziontal
Horiziontal
Horiziontal
Horiziontal
Horiziontal
Horiziontal
23. Page 030
W
H
H
W
H
W
W
H
H
W
Page 031
MELAMINE SERIES
4 edges sealed with PVC
H=60mm
Melamine Grade D
Melamine Grade E
MELAMINE SERIES
Base:18mm thick particle board. Finish: both faces coated with melamine.
Base:18mm thick particle board. Finish:both faces coated with melamine.
PWMA0028(WBMA701) PWMA0041(C502) PWMA0042(C503)
PWMA0054(WBMA331)PWMA0016(WBMA327)PWMA0014(WBMA328)
YMA001
(A-F)
YMA009
(A-S)
YMA011
(A-SL)
YMA012
(A-SA)
YMA013
(YMA07)
PWMA0061(WBMA340)
PWMA0015(WBMA341)
PWMA0103 PWMA0104 PWMA0107
Melamine Grade G
PWMA0002(WBMA338) PWMA0005(WBMA325) PWMA0008(WBMA335) PWMA0049(WBMA322)
PWMA0055(WBMA332)PWMA0052(WBMA329) PWMA0056(WBMA333) PWMA0057(WBMA334)
PWMA0058(WBMA336) PWMA0060(WBMA339)
YMA022
H
W
Decorative Accessories
NAME PICTURE/DIAGRAM SIZECODE MATERIAL/TECHNICS
54
50
YSL001(AL-10)
AL-12)YSL003(
This crown molding is made from plastic;
YSL001 is silver and YSL003 is white.
Crown
moulding
R2
YSG001
(ZDB-F25) Thickness=25mmDecorative
shelf
54
YSR001(AR-04)
Light
cornice
YSR003(AR-06)
YSR004(AR-07)
DOOR
STYLE
PICTURE
DOOR DRAWER/ SIZE LIMITS/TECHNICS
ILLUSTRATION
BASE/DOOR THICKNESS/
FINISH
OPTIONAL FRAMED
GLASS DOOR
-Door thickness:18mm
-Both faces coated with
melamine
YMB006
YMB008
YMB011
-Bar handle:PWWK0001/PWWK0003
-3 edges sealed with PVC band
-Door thickness:18mm
-Both faces coated with
melamine
YMB006
YMB008
YMB011
-Bar handle:PWWK0001
-3 edges sealed with aluminum
band PWFL0001
-Door thickness:18mm
-Both faces coated with
melamine
YMB006
YMB008
YMB011
Bar handle:PWWK0010.
-Door thickness:18mm
-Both faces coated with
melamine
NONE
This door style matches high gloss
melamine PWMA0062/PWMA0063
only.
-Door thickness:18mm
-Both faces coated with
melamine
NONE
Edges sealed with ABS band.
-Door thickness:18mm
-Both faces coated with
melamine
YMB006
YMB008
YMB011
Base:18mm thick particle board. Finish:both faces coated with melamine.
-Base: particle board
-Finish: both faces coated with melamine
This crown molding is made from plastic;
YSR001 is silver,YSL003 white and YSR
is maple color.
24. Page 032 Page 033
MELAMINE SERIES
Melamine
Grade D
PWMA0041
(C502)
18*2440*1220
PWMA0042
(C503)
18*2440*1220
PWMA0028
(WBMA701)
18*2440*1220
Melamine
Grade E
PWMA0015
(WBMA341)
18*2440*1220
PWMA0054
(WBMA331)
18*2440*1220
PWMA0061
(WBMA340)
18*2440*1220
PWMA0103 18*2440*1220
PWMA0104 18*2440*1220
PWMA0107 18*2440*1220
18*2440*1220
PWMA0002
(WBMA338)
Melamine
Grade G
18*2440*1220
PWMA0005
(WBMA325)
18*2440*1220
PWMA0008
(WBMA335)
18*2440*1220
PWMA0049
(WBMA322)
Melamine
Grade G
18*2440*1220
PWMA0052
(WBMA329)
18*2440*1220
PWMA0055
(WBMA332)
18*2440*1220
PWMA0056
(WBMA333)
18*2440*1220
PWMA0057
(WBMA334)
18*2440*1220
PWMA0058
(WBMA336)
18*2440*1220
PWMA0060
(WBMA339)
18*2440*1220
PWMA0047
(WBMA317)
18*2440*1220
PWMA0048
(WBMA320)
2440
1220
H
WA
B
2440
1220
H
WA
B
2440
1220
H
WA
B
2440
H
WA
B
1220
2440
H
WA
B 1220
2440
H
WA
B
1220
2440
H
WA
B
1220
2440
H
WA
B
1220
2440
H
WA
B
1220
2440
H
WA
B
1220
2440
H
WA
B
1220
2440
H
WA
B
1220
2440
H
WA
B
1220
2440
H
WA
B
1220
2440
H
WA
B
1220
2440
H
WA
B
1220
2440
H
WA
B
1220
2440
H
WA
B
1220
2440
H
WA
B
1220
2440
H
WA
B
1220
2440
1220
H
WA
B
MATERIAL CODE
Grain Direction for Melamine Doors And Drawers
GRAIN DIAGRAM OF PLAIN BOARD NOTES
HoriziontalVertical
Horiziontal
Horiziontal
Horiziontal
Horiziontal
Horiziontal
Horiziontal
Vertical
Vertical
Vertical
Vertical
Vertical
Vertical
HoriziontalHoriziontal
MELAMINE SERIES
MATERIAL CODE
Grain Direction for Melamine Doors And Drawers
STANDARD SHEET
SIZE(D*L*W)
GRAIN DIAGRAM OF PLAIN BOARD
A represents door, B represents standard sheet.
NOTES
GRAIN DIRECTION
FOR DOOR FRONTS
HoriziontalHoriziontal
HoriziontalHoriziontal
HoriziontalHoriziontal
Vertical Horiziontal
Vertical
Vertical
Vertical
Vertical
Vertical
Vertical
Vertical
Vertical
Vertical
Horiziontal
Horiziontal
Horiziontal
Horiziontal
Horiziontal
Horiziontal
Horiziontal
Horiziontal
Horiziontal
GRAIN DIRECTION FOR
DRAWER FRONT
AND FLAP DOOR
STANDARD SHEET
SIZE(D*L*W) A represents door, B represents standard sheet.
GRAIN DIRECTION
FOR DOOR FRONTS
GRAIN DIRECTION FOR
DRAWER FRONT
AND FLAP DOOR
25. Page 034 Page 035
W
H
W
H
H
W
H
W
FLAT LAMINATE SERIES
Edges sealed with 2mm thick
PVC or 1.5mm thick acrylic band.
YMP001
(YMP01)
YMP002
(YMP02)
YMP004
(YMP04)
YMP006
(YMP06)
YMP008
(YMP08)
R300
YMP009
FLAT LAMINATE SERIES
PWMP1007(WBMP101)
PWMP1001(WBMP102) PWMP1003(WBMP104)
Flat Laminate Grade D
Flat Laminate Grade A Base:18mm thick MDF. Front face laminated with high gloss acrylic,high gloss PVC or high gloss PETG deco paper
Back face coated with white melamine.
Base:18mm thick MDF. Front face laminated with high gloss acrylic,high gloss PVC or high gloss PETG deco paper
Back face coated with white melamine.
PWMP1006(WBMP107)
PWMP1009(WBMP504)
PWMP1010
PWMP1011 PWMP1012
DOOR
STYLE
PICTURE
DOOR DRAWER/ SIZE LIMITS/TECHNICS
ILLUSTRATION
BASE/DOOR THICKNESS/
FINISH
OPTIONAL FRAMED
GLASS DOOR
Door thickness:19mm
YMB006
YMB008
YMB011
-Bar handle:PWWK0001/
PWMK0003.
-3 edges sealed with 2mm thick
PVC or 1.5mm thick acrylic band.
Door thickness:19mm
YMB006
YMB008
YMB011
-Bar handle:PWWK0001.
-3 edges sealed with aluminum
band PWFL0001.
Door thickness:19mm
YMB006
YMB008
YMB011
Aluminum edge band
PWFL0005(shown in the left
picture) is optional, so please
remark it in your drawing if it
is required.
Door thickness:19mm
YMB006
YMB008
YMB011
Arc door. Door thickness:19mm
-Door thickness:19mm
-Optional finish:
PWMP1010.
4 edges are rounded.
26. Page 036 Page 037
TOUGHENED GLASS SERIES
-W≥248mm and H≥148mm
-YMQ001A applies black aluminum
frame
-YMQ001B applies silver aluminum
frame
-YMQ001C applies champagne
aluminum frame.
YMQ001A
(YMQ01A)
YMQ001B
(YMQ01B)
YMQ002A
(YMQ02A)
YMQ002B
(YMQ02B)
YMQ001C
(YMQ01C)
YMQ002C
(YMQ02C)
YMQ003
(YMQ03)
YMQ003A
(YMQ03A)
YMQ004
(YMQ04)
YMQ004A
(YMQ04A)
hidden handle
hidden handle
front
back
PWMQ0001(WBMQ101)
Toughened Glass Door
PWMQ0002(WBMQ102) PWMQ0003(WBMQ103) PWMQ0004(WBMQ104)
PWMQ0005(WBMQ105) PWMQ0006(WBMQ106) PWMQ0007(WBMQ107)
DOOR
STYLE
PICTURE
DOOR DRAWER/ SIZE LIMITS/TECHNICS
ILLUSTRATION
FRAME/DOOR THICKNESS OPTIONAL HINGES
-Glass thickness:5mm
-Door thickness:17mm
-Aluminum bar handle
PWWM0004
PWWM0005
PWWM0006
PWWM0027
PWWM0028
-W≥148mm and H≥148mm.
-YMQ002A applies black aluminum
frame
-YMQ002B applies silver aluminum
frame
-YMQ002C applies champagne
aluminum frame
-Glass thickness:5mm
-Door thickness:17mm
-Aluminum bar handle
PWWM0004
PWWM0005
PWWM0006
PWWM0027
PWWM0028
For door/drawer front/flap door:
-When W≥298mm and H≥147mm,
door profile is same as the left picture.
-When 148mm≤W<298mm and
H≥147mm,door style turns to be
YMQ004(without built-in handle) instead.
-When W<148mm or H<147mm,
this door style is unavailable, please
apply decorative panel YSM034 instead.
-Optional glass:PWMQ0005,PWMQ0006
-Glass thickness:5mm
-Door thickness:25mm
-Aluminum bar handle
When W≥298mm and H≥147mm,
drawer profile is shown in the left
diagram.
For door/drawer front/flap door:
-When W≥148mm and H≥147mm,
door profile is same as the left picture.
-When W<148mm or H<147mm,
this door style is unavailable, please
apply decorative panel YSM034 instead.
-Optional glass:PWMQ0005,PWMQ0006
-Glass thickness:5mm
-Door thickness:25mm
-Aluminum bar handle
When W≥298mm and H≥147mm,
drawer profile is same as the left
diagram.
TOUGHENED GLASS SERIES
insert: 5mm thick glass, frame: 17mm thick aluminum frame
27. ALUMINUM FRAMED GLASS/ACRYLIC DOORS
Page 038 Page 039
H
W
H
W
H
W
W
H
W
H
W
H
H
W
H
W
4
YMB001
(D-02)
YMB002
(D-03)
YMB003
(D-04)
YMB004
(D-05)
YMB005
(D-06)
YMB006
(D-10)
YMB007
(D-11)
WOOD FRAMED GLASS DOORS
Glass insert is sealed with plastic
trim while door finish is lacquer/
PVC/PP,and sealed with solid wood
trim while door is solid wood.
Section
Glass or acrylic
YML001(LH-M02)Code
Insert
Section
Aluminum shutter,acrylic
YML003(LH-M08)
Door height 900
and door width 450.
≤
≤
Code
Insert
Section
Glass or acrylic
YML002(LH-M05)(silver)
YML002B(LH-M05B)(black)
Code
Insert
Section
Glass or acrylic
60
33
Code
Insert
Aluminum Framed Glass Door
YML007(WBML20)
Yellow/purple/balck acrylic
Section
Code
Insert
16.4
49.5
YML008(WBML21)
Red acrylic PWMV0011
Section
Code
Insert
YML005(LH-M10) YML003B(LH-M08B)
(Champagne Color)
(silver)
YML003C (black)
Notes: -Door style YML005 matches hinges PWWM0030/PWWM0032/PWWM0041/PWWM0044/PWWM0045.
-Door style YML003/YML003B/YML003C matches hinges PWWM0034/PWWM0035/PWWM0038/PWWM0039.
-As door style YML002/YML002B with glass insert can not be drilled for installing handles/knobs, as an alternative,
base cabinets can apply aluminum bar handle PWWK002,and wall cabinets apply aluminum bar handle PWWK0009.
(find bar handles at page 066).
Section
Glass
YML009(WBML22)Code
Insert
55
21
5.8
DOOR
STYLE
PICTURE
DOOR DRAWER/ SIZE LIMITS/TECHNICS
ILLUSTRATION
BASE/DOOR THICKNESS/FINISH
-Optional finish: lacquer, PVC foil, PP foil,
painted solid wood.
-Base/door thickness is subject to door finishes.
-Optional finish: painted solid wood,
PVC foil, PP foil.
-Base/door thickness is subject to door finishes.
Size limits:
296mm≤W≤600mm and
447mm≤H≤1450mm.
Door structure:
-When 447mm≤H<600mm,
door has 2 horizontal bars.
-When 600mm≤H≤1200mm,
door has 3 horizontal bars.
-When 1200mm<H≤1450mm,
door has 4 horizontal bars.
-Optional finish: painted solid wood, PVC foil,
PP foil, lacquer.
-Base/door thickness is subject to door finishes.
-Optional finish:melamine, HPL, acrylic,
flat laminate.
-Base/door thickness is subject to door finishes.
-Base: MDF
-Door thickness:25mm
-Finish:lacquer
black insert is 4.5mm thick acrylic
This door style is suitable for PP foil
YMD003 only.
28. WOOD FRAMED GLASS DOORS
Page 040
W
YMB009
(D-14)
Door structure:
-When 447mm≤H<600mm,
door has 2 horizontal bars.
-When 600mm≤H≤1200mm,
door has 3 horizontal bars.
-When 1200mm<H≤1450mm,
door has 4 horizontal bars.
YMB023A
(D-31)
(R300)
A
A
YMB023B
(D-31)
(R1130)
Page 041
WOOD FRAMED GLASS DOORS
W
H
W
H
YMB010
(D-15)
YMB010
(D-15)
YMB012
(D-19)
YMB010
(D-15)
-Matching door style YMM016(YMM42).
-Available size: 497*697mm
YMB015
(D-23)
YMB016
(D-24)
W
H
YMB010
(D-15)
YMB010
(D-15)
YMB016
(D-24)
DOOR
STYLE
PICTURE
DOOR DRAWER/ SIZE LIMITS/TECHNICS
ILLUSTRATION
BASE/DOOR THICKNESS/FINISH
DOOR
STYLE
PICTURE
DOOR DRAWER/ SIZE LIMITS/TECHNICS
ILLUSTRATION
BASE/DOOR THICKNESS/FINISH
-Base:MDF
-Door thickness:19mm
-Optional finish: PVC foil
-Door sizes:
597mm*1316mm,597mm*1369mm
-Suitable for door style YMM016 only
-Glass insert:PWMB0019
-Suitable for door style YMM032 only.
-Door height:350mm~900mm;
door with R300.
-Frame: cherry wood/alder painted.
-Door thickness:21mm
Suitable for door style YMM033 only.
Door height:350mm~900mm;
door with R1130.
-Frame: ash painted.
-Door thickness:22mm
-Suitable for door style YMM003/
YMM004 only
-Door available sizes:
347mm*697mm,347mm*797mm,
397mm*697mm,397mm*797mm,
447mm*697mm,447mm*797mm,
497mm*697mm,497mm*797mm.
-Base/door thickness is subject to door finishes.
-Optional glass:PWMB009
-Suitable for door style YMM010 only.
-Door available sizes:
347mm*697mm,397mm*697mm,
447mm*697mm,497mm*697mm,
497mm*1007mm。
-Door thickness:21mm
-Frame is painted red oak
-Optional glass:PWMB0012
-Suitable for door style YMM013 only.
-Door available sizes:
397mm*697mm,397mm*797mm,
447mm*697mm,447mm*797mm,
497mm*697mm,497*797mm,
497mm*1107mm.
-Door thickness:21mm
-Frame is painted cherry wood
-Optional glass:PWMB0011
-Frame: birch painted.
-Door thickness:21mm
-Optional glass:PWMB0012
-Frame:MDF coated with PVC foil.
-Core: lacquered MDF
Optional PVC foil:
PWMG0009,PWMG0010,PWMG0012
-Suitable for door style:
YMM010/YMM014/YMM032/
YMG020 only.
-Door size limits:
W≥297mm and H≥697mm.
Door thickness:21mm
Base/door thickness is subject to door finishes
-Suitable for door style: YMM011 only.
-Door size limits:
W≥297mm and H≥697mm.
-Door thickness:21mm
-Frame: cherry wood painted
Door size limits:
W=347mm and H≥697mm.
-Door thickness:21mm
-Frame: cherry wood painted
29. Page 042
WOOD FRAMED GLASS DOORS
YMB017
(D-25)
YMB018
(D-26)
W
H
W
H
-Suitable for door style YMM011
-W≥297mm and H≥697mm
Page 043
WOOD FRAMED GLASS DOORS
YMB020
(D-28)
YMB021
(D-29)
YMB022
(D-30)
YMB023C
(D-31)
(R240)
YMB024
(D-32)
(R240)
YMB025
(D-33)
YMB026
(D-34)
YMB027
(D-35)
A
B
YMB030
(D-38)
YMB028
(D-36)
YMB029
(D-37)
①
②
③
④
DOOR
STYLE
PICTURE
DOOR DRAWER/ SIZE LIMITS/TECHNICS
ILLUSTRATION
BASE/DOOR THICKNESS/FINISH
DOOR
STYLE
PICTURE
DOOR DRAWER/ SIZE LIMITS/TECHNICS
ILLUSTRATION
BASE/DOOR THICKNESS/FINISH
-Frame: cherry wood painted
-Door thickness: 21mm
-Suitable for door style YMM012.
-W=347mm/397mm/447mm/
497mm/547mm,
and 697mm≤H≤1450mm.
-Frame: red oak painted
-Door thickness:21mm
Suitable for door style YMM025.
W=396mm≤W≤600mm
and 356mm≤H≤797mm.
(this door style can also
match drawer)
-Frame: walnut painted
-Door thickness: 21mm
497mm*697mm,497mm*797mm,
497mm*897mm.
-Frame: cherry wood painted
-Door thickness: 21mm
Suitable for door style YMS008.
H≤2090mm; diamond moldings
on door face.
-Base: plywood
-Door thickness: 21mm
-Door finish: acrylic PWMS0012
Suitable for door style YMM016.
H=715mm.
-Door thickness: 21mm
-Door finish: PWMM1001
-Suitable for door style YMM016
-This door style matching arc cabinets
-Door insert is glass PWMB0020
and H=797mm or 956mm.
-Door thickness:21mm
-Door finish:PWMM1001
-350mm≤H≤950mm
-Insert:1.8mm thick clear acrylic
-Frame: alder painted
-Door thickness:21mm
-Suitable for door style YMG020
-When W≥510mm and H≥398mm,
profile is shown in the left drawing ①.
-When W≥510mm and
356mm≤H<398mm, profile is
shown in the left drawing ②.
-When 248mm≤W<510mm
and H≥398mm, profile is shown
in the left drawing ③.
-When 248mm≤W<510mm
and 356mm≤H<398mm, profile
is shown in the left drawing ④.
-Door is unavailable
when W<248mm or H<356mm.
-Frame: MDF
-Door thickness: 22mm
-Suitable for door style YMG021
-Door size limits:
398mm≤W≤650
and 645mm≤H≤1450.
-Door structure:
When 1000mm≤H≤1450mm,door
profile is shown in the left drawing 1.
When 645mm≤H<1000mm,door
profile is shown in the left drawing 2.
-Frame: MDF
-Door thickness: 22mm
-Frame: MDF
-Door thickness: 22mm
-Suitable for door style YMD009
-W≥798mm and H≥238mm
-Frame: MDF
-Door thickness: 22mm
-Door available sizes:
W448mm*H807mm,
W298mm*H547mm,
W298mm*H647mm.
-Insert: glass PWMB0025.
-Frame: alder painted
-Door thickness: 21mm
-Suitable for door style YMM035B.
-Size limits:
397mm≤W≤597mm
and 497mm≤H≤1450mm.
30. Page 044
WOOD FRAMED GLASS DOORS
Page 045
YMB011
(D-18)
W
H
H
W
YMB008
(D-12)
YMB031
(D-39)
W≥298mm and H≥597mm.
W
YMB052A
YMB053
Glass
Name
Code
Sheet Size
PWMB0001
DARK BLACK
1220mm*1830mm
GLASS & ACRYLIC INSERTS
DOOR
STYLE
PICTURE
DOOR DRAWER/ SIZE LIMITS/TECHNICS
ILLUSTRATION
BASE/DOOR THICKNESS/FINISH
-Frame: MDF
-Door thickness: 22mm
-Suitable for door style YMK103
-W≥238mm and H≥397mm
-Frame: MDF
-Door thickness:19mm
Suitable for door style
YMQ001A/YMQ001B/YMQ001C/
YMQ002A/YMQ002B/YMQ002C.
-Frame: MDF
-Door thickness:17mm
Not suitable for solid wood
or surface-grooved door styles.
Door thickness:18~20mm.
-Door thickness:18~20mm
-Available finish: lacquer/PVC foil/
HPL/melamine/acrylic/UV lacquer/
wood veneer/flat laminate
Thickness 5mm
Name
Code
Sheet Size
PWMB0002
TRANSPARENT
1220mm*1830mm
Thickness 5mm
Name
Code
Sheet Size
PWMB0003
STRIPE
1100mm*1650mm
Thickness 5mm
Name
Code
Sheet Size
PWMB0004
AGE
1100mm*1650mm
Thickness 5mm
Name
Code
Sheet Size
PWMB0005
FROSTED
1100mm*1650mm
Thickness 5mm
Name
Code
Sheet Size
PWMB0010
EXPLOSION-PROOF
1220mm*1830mm
Thickness 5mm
Name
Code
Sheet Size
PWMB0013
FLOWER SHADE
1220mm*1830mm
Thickness 5mm
Name
Code
Sheet Size
PWMB0014
FLOWER FROSTED
1220mm*1830mm
Thickness 5mm
Name
Code
Sheet Size
PWMB0015
RIPPLE
1220mm*1830mm
Thickness 5mm
Name
Code
Sheet Size
PWMB0018
DIAMOND FROSTED
1220mm*1830mm
Thickness 5mm
Name
Code
Sheet Size
PWMB0026
TEA
1220mm*1830mm
Thickness 5mm
Name
Code
Sheet Size
PWMB0027
VIOLET
1220mm*1830mm
Thickness 5mm
Name
Code
Sheet Size
PWMB0028
CRYSTAL
1220mm*1830mm
Thickness 5mm
Name
Code
Sheet Size
PWMB0085
WILD
1220mm*1830mm
Thickness 5mm
Matching Door Style YMG025A
31. Page 046 Page 047
GLASS & ACRYLIC INSERTS
Glass
GLASS & ACRYLIC INSERTS
Glass
Name
Code PWMB0009
SQUARE
Matched Door Style YMM002/YMM004/YMB010
Thickness 5mm
Name
Code PWMB0011
PETAL
Matched Door Style YMM013/YMB010
Thickness 6mm
Name
Code PWMB0021
MIRROR
Application used as decorative panel
Thickness 5mm
Name
Code PWMB0019
VERONA FROSTED
Matched Door Style YMM0016/YMB010
Thickness 5mm
Name
Code PWMB0020
NAPOLI FROSTED
Matched Door Style YMM0016/YMB024
Thickness 5mm
Name
Code PWMB0022
CARO
Door Size W597mm*H397mm,W897mm*H397mm,
W640mm*H1369mm.
Thickness 5mm
Name
Code PWMB0024
CHAMPAGNE
Thickness 5mm
Name
Code PWMB0012
SNOW
Thickness 4mm
Name
Code PWMB0023
FLOWER PRINT
W597mm*H797mmDoor Size
Name
Code PWMB0025
ETCHED FLOWER
Door Size W598mm*H957mm,W448mm*H697mm,
W448mm*H797mm,W448mm*H356mm,
W598mm*H347mm
Thickness 5mm
Name
Code PWMB0086
DIAMOND
Door Size W497mm*H797mm
Thickness 5mm
Door Style YMM076/YMM078
32. Page 048 Page 049
GLASS & ACRYLIC INSERTS
Acrylic
Name
Code PWMV0001
Thickness 4.5mm
WHITE FROSTED Name
Code PWMV0002
Thickness 4.5mm
BRWON TRANSPARENT Name
Code PWMV0003
Thickness 4.5mm
RED TRANSPARENT
Name
Code PWMV0004
Thickness 4.5mm
GREEN TRANSPARENT Name
Code PWMV0005
Thickness 4.5mm
BLUE TRANSPARENT Name
Code PWMV0006
Thickness 4.5mm
TRANSPARENT
Name
Code PWMV0007
Thickness 4.5mm
YELLOW OPAQUE Name
Code PWMV0008
Thickness 4.5mm
BLACK TRANSLUCENT Name
Code PWMV0009
Thickness 4.5mm
CHAMPAGNE TRANSLUCENT
Name
Code PWMV0010
Thickness 4.5mm
PURPLE OPAQUE Name
Code PWMV0011
Thickness 4.5mm
RED OPAQUE
COUNTERTOP PROFILES
Dupont
Corian acrylic/
OPPEIN
solid surface
grade AA
Straight edge 25 YTR001A
(R-Z25)
25
Straight edge 38
YTR001B
(R-Z38) 38
Straight edge 60 YTR001C
(R-Z60)
58
Straight edge 90 YTR001D
(R-Z90)
90
Top round edge (R8) 38
YTR002B
(R-L38)
38
Top round edge (R8) 60 YTR002C
(R-L60)
Top round edge (R8) 90
YTR002D
(R-L90)
Bevel edge antispill 38 YTR003B
(R-XF38)
Bevel edge antispill 60 YTR003C
(R-XF60)
Roman edge 38 YTR004B
(R-Q38)
Roman edge 60 YTR004C
(R-Q60)
MATERIAL PROFILE NAME PROFILE CODE
FRONT EDGE
THICKNESS(MM)
PROFILE DWG
90
38
58
38
58
Top & bottom bevel edge YTR005A
(YTR13)
20
58
Notes:
In order to bear the weight and impact evenly from countertops,support rails are fixed on the back side of coutertops as profiles show.
We fix aluminum support rails for 38mm/40mm/58mm/60mm thick countertop; and equivalent stone support rails for other countertops.
33. COUNTERTOP PROFILES
Page 050 Page 051
COUNTERTOP PROFILES
20Straight edge 20
YTS001A
(S-Z25)
YTS001C
(S-Z60)
YTS001B
(S-Z38)
YTS001D
(S-Z90)
YTS005B
(S-R38)
Bevel edge 40
YTS002B
(S-L38)
Top round edge 40
Top round edge 60
Top round edge 90
YTS002C
(S-L60)
YTS002D
(S-L90)
Bevel edge 60
YTS005C
(S-R60)
40Straight edge 40
60Straight edge 60
Straight edge 90 90
40
60
90
40
60
40
60Bevel edge antispill 60
Bevel edge antispill 40
YTS003C
(S-XF60)
YTS003B
(S-XF38)
YTS006B
(S-Q38)
Dupont bullnose 40 40
YTS001E
(YTS19)
YTS001F
(YTS20)
Straight edge 120
Straight edge 150
120
150
MATERIAL PROFILE NAME PROFILE CODE
FRONT EDGE
THICKNESS(MM)
PROFILE DWG
Quartz Stone
Notes:
In order to bear the weight and impact evenly from countertops,support rails are fixed on the back side of coutertops as profiles show.
We fix aluminum support rails for 38mm/40mm/58mm/60mm thick countertop; and equivalent stone support rails for other countertops.
Triple waterfall bullnose
YTS007B
(S-T38)
Roman edge 40
YTS004B
(YTS112)
Roman edge 60
YTS004C
(YTS114)
40
40
60
Sharknose
Chamfer
YTS011A
(YTS17)
YTS012A
(YTS18)
20
20
YTS005A
(YTS21)
YTS005E
(YTS22)
Bevel edge 20
Bevel edge 120
20
120
YTS008C
(YTS14)
YTS009C
(YTS15)
YTS010C
(YTS16)
YTS013B
YTS013C
Cloud edge 60 60
Knife edge 60 60
Bow edge 60 60
Chamfer edge 40 40
60Chamfer edge 60
MATERIAL PROFILE NAME PROFILE CODE
FRONT EDGE
THICKNESS(MM)
PROFILE DWG
Quartz Stone
Notes:
In order to bear the weight and impact evenly from countertops,support rails are fixed on the back side of coutertops as profiles show.
We fix aluminum support rails for 38mm/40mm/58mm/60mm thick countertop; and equivalent stone support rails for other countertops.
36. Page 056 Page 057
COUNTERTOP MATERIALS
HG001 HG002
Granite
HG004
Kitchen Cabinet Countertop,Wall Tiles, Floor Tiles
HG007HG006
HG005
HG020B HG025
HG015HG013
HG037HG036
HG034 HG035
PWGF0001 PWGF0003PWGF0002
Premium Carcase
PWGF0004
PWGF0006 PWGF0007
Coat: HPL Base:15mm thick plywood | W/O logo on carcase panel
PWGA0006 PWGA0008PWGA0007
Standard A Carcase Coat: melamine Base: 16mm thick green-core particle board W/O logo on carcase panel or edge band
PWGA0001 PWGA0009PWGA0004
Standard B Carcase Coat: melamine Base: 16mm thick white-core particle board W/O logo on carcase panel
PWGA0010
CARCASE
W/O logo on edge band W/O logo on edge band W/O logo on edge band W/O logo on edge band
W/ logo on edge band W/ logo on edge band
W/ logo on edge band W/ logo on edge bandW/O logo on edge band W/O logo on edge band
39. PVC & ACRYLIC EDGE BANDS
Page 062 Page 063
DECORATIVE CAPS
Decorative Caps For Idle Holes
Door FinishMaterial
Door & Edge Band Standard Configuration
(19mm)
PWMC0003 PWFP0040(2*23mm)
PWMC0005 PWFP0035(2*23mm)
PWMC0006 PWFP0033(2*23mm)
PWMC0007 PWFP0036(2*23mm)
PWMC0008 PWFP0068(2*23mm)
PWMC0009 PWFJ0001(1.5*23mm)
PWMC0010 PWFJ0002(1.5*23mm)
PWMC0011 PWFJ0003(1.5*23mm)
PWMC0012 PWFJ0004(1.5*23mm)
PWMC0013 PWFJ0005(1.5*23mm)
PWMC0014 PWFJ0009(1.5*23mm)
PWFP0028(0.6*23 )mm
PWFP0028 0.6*23( )mm
PWFP0102(0.6*23mm)
PWFP0098 0.6*23( )mm
PWFP0033(0.6*23mm)
PWFP0100 0.6*23( )mm
PWFP0053 0.6*23( )mm
PWFP0102 0.6*23( )mm
PWFP0105 0.6*23( )mm
PWFP0053 0.6*23( )mm
PWFP0105 0.6*23( )mm
UV lacquer
Acrylic
(19mm)
PWMR0012 Same color ABS edge band(1*23mm)
PWMR0013 Same color ABS edge band(0.8*23mm)
PWMR0014 Same color ABS edge band(1*23mm)
PWMR0011 PWFP0025(1.2*23mm)
PWMR0001 PWFP0019(1.2*23mm)
PWMR0002 PWFP0027(1.2*23mm)
PWMR0003 PWFP0024(1.2*23mm)
PWMR0004 PWFP0017(1.2*23mm)
PWMR0005 PWFP0018(1.2*23mm)
PWMR0006 PWFP0022(1.2*23mm)
PWMR0008 PWFP0021(1.2*23mm)
PWMR0009 PWFP0023(1.2*23mm)
PWMR0010 PWFP0026(1.2*23mm)
Same color ABS edge band(1*23mm)
PWFP0021(1.2*23mm)
PWFP0023(1.2*23mm)
PWFP0026(1.2*23mm)
Same color ABS edge band(1*23mm)
Same color ABS edge band(0.8*23mm)
PWFP0025(1.2*23mm)
PWFP0019(1.2*23mm)
PWFP0022(1.2*23mm)
PWFP0017(1.2*23mm)
PWFP0024(1.2*23mm)
PWFP0027(1.2*23mm)
PWFP0018(1.2*23mm)
Door Edge Band Filler Edge Band Caps for 5mm
System Holes
Ø
Matched Carcase Finish
PWGA006
Caps for 1* 17mm
Hettich Cams
Ø Caps for 0.4* 13mm
Screw Caps
Ø
PWGA0007/PWGF0002
PWGA0008/PWGF0003
PWGA0001/PWGF0001
PWGA0004/PWGF0004
PWGA0009/PWGF0006
PWGA0010/PWGF0007
(thickness×width)(thickness×width)
Cream White
Cream white
White White
White White
Grey Grey Grey
Clay Bronze Wenge
Brown OPPEIN Red OPPEIN Red
Grey Cloth Grey Cloth Grey Cloth
Cream White ClothWhiteCream White
40. Page 064 Page 065
ALUMINIUM EDGE BANDS
DOOR PANEL THICKNESS:
Melamine faced panel thickness=18mm; HPL panel thickness=19mm; Acrylic faced panel thickness=21mm.
D
PWFL0002(FB-F08)
D=16mm
Matching movable shelf
PWFL0001(FB-F10)
D=19.5/20.5/21.5mm
Aluminum Edge Band
Matching HPL (door style F-FA/F-LA);
melamine, UV lacquer, metal foil (door
style A-LA/A-SL); acrylic (door style S-LA/
S-SL); flat laminate (YMP03/YMP04).
Code & Depth
Application
Code & Depth
Application
Code & Depth
Application
PWFL0003(FB-F11)
D=8mm
Matching glass shelf
PWFL0004(FB-F15)
D=19/20/21mm
Matching wood framed glass
YMB008(D-12) and YMB006(D-10).
door
Code & Depth
Application
Code & Depth
Application
Code & Depth
Application
PWFL0005(WFMF12)
D=20mm
D=20mm
PWFL0006(WFMF13)
22
13
1. Matching solid wood, door style YMN002
(YMM35); aluminum bar handle PWWK0020
(WWLK24).
2. PWFL0006B(WFMF13B) Apply for
YMF006(YMF06)
Matching flat laminate panel,
door style YMP006 (YMP06)
PWFL0006B(WFMF13B)
Code & Depth
Application
Code
Application
9.9
22.5
PWFL0007(WFMF15)
D=21.5mm
Matching acrylic door style
YMS008(YMS08)
PWFL0010A(WFMF18A)
Black
Only suitable for YMQ001A(YMQ01A)
YMQ002A(YMQ02A), W≥53mm
ALUMINIUM EDGE BANDS
Aluminum Edge Band
PWFL0011(WFMF19)
Iron grey
Suitable for 16mm wooden shelf
PWFL0012(WFMF20)
Iron grey
Code
Application
Code
Application
Only suitable for YMQ001C
(YMQ01C)YMQ002C(YMQ02C)
W≥53mm
PWFL0010C(WFMF18C)
Champagne
PWFL0010B(WFMF18B)
Only suitable for YMQ001B
(YMQ01B)YMQ002B(YMQ02B)
W≥53mm
Silver
Code
Application
Code
Application
Only suitable for YMQ001B
(YMQ01B)YMQ002B(YMQ02B)
W≥53mm
41. Page 066 Page 067
PWWK0007(WWLK14)
10
10
D=10mm
Matching lacquer door style
YMK006(YMK21).
PWWK0010A
PWWK0010B(FB-K07B)
PWWK0010C(FB-K07C)
(FB-K07A)
52
D
D
10
40
D
D=19/20/21(from left to right)
Aluminum Bar Handle
PWWK0001(FB-K02)
35
D
D=19/20/21mm
PWWK0003(FB-K08)
D=19/20/21mm
PWWK0011(
PWWK0012(WWLK12),
PWWK0013(WWLK13)
WWLK11),
10
15
52
15
40
15
D=15mm
Matching lacquer
door style
YMK007(YMK22)
(from left to right)
ALUMINUM BAR HANDLES
PWWK0027(
(Black matte)
WWLK40)
D=19/20/21
For flat door only
D
Code Code & Depth
PWWK0002 FB-K04)
(Silver)
( PWWK0009(FB-K05)
PWWK0002B
(Black )
(FB-K04B)
D=16.8mm
PWWK0002D
(Golden)
(FB-K04D)
Code & Depth Code & Depth
Code & Depth Code & Depth
Application
Code & Depth Code & Depth
ApplicationApplication
Code Code
Application
80
22
PWWK0020(WWLK24)
Matching wood veneer door style
YMN002(YMM35)
Matching aluminum edge band
PWFL0006(WFMF13)
PWWK0016(WWLK17)
( )Iron grey
PWWK0017(WWLK18)
( )Black
ALUMINUM BAR HANDLES
Aluminum Bar Handle
PWWK0002E(WWLK34)
Handle treatment:
high gloss wiredrawing.
PWWK0014(WWLK15)
( )Iron grey
PWWK0028(
Silver
WWLK42)
Matching sintered surface,
door style YME002(YME02)
PWWK0030(WWLK44)
PWWK0030(WWLK44) matching
with G10007422(WWLK4402)
PWWK0008(WWLK41)
Handle treatment:
sandblasting & oxidation;
Matching with 18mm-19mm thick
flat profile door, the standard size is
298,348,398,448,498,548,598,
698,798,898,998,1198
PWWK0026(WWLK38)
Handle treatment: oxidation.
Matching with 19-21mm thick flat
profile door, the standard size is
298,398,448,498,548,598,798,898,
998,1198
PWWK0031(WWLK45)
Only manufacture standard size(mm):
78,128,228,328,378,428,528,628,728,
828,928,1128,1728,corresponding door
panel width is bar handle length+70mm.
BWWK0004
Code Code
Application
PWWK0015(WWLK16)
( )Black
Code
Application
Code
Application
Code
Application
Code
Application
Code
Application
Code
42. Page 068 Page 069
Handle & Knob
HANDLES & KNOBS
PWWL0001A(LJ246A) 128 172 31 B
PWWL0001B(LJ246B) 96 132 31 B
Code Height GradeHole
distance
Total
length
Zinc alloy
PWWL0002
(LJ409)
128 152 26 C
Code Height GradeHole
distance
Total
length
Zinc alloy
PWWL0007A(LJ604A) 224 247 35 C
384 407 35 B
576 600 35 B
Code Height GradeHole
distance
Total
length
Aluminium alloy
PWWL0007B(LJ604B)
PWWL0007C(LJ604C)
PWWL0008A(LJ605A) 224 260 37 C
384 420 37 B
576 610 37 B
Code Height GradeHole
distance
Total
length
Aluminium alloy
PWWL0008B(LJ605B)
PWWL0008C(LJ605C)
PWWL0052
(WWLA123) 219 38
Code Height GradeHole
distance
Total
length
192 AA
Zinc alloy & crystal glass
122 28 B96
PWWL0052B
(WWLA123B)
PWWL0052C
(WWLC140) 185 30 B160
PWWL0005(LJ509) 128 138 31 B
Code HeightGradeHole
distance
Total
length
Zinc alloy
PWWL0011A(LJ632A) 96 155 17 C
128 276 17 B
Code Height GradeHole
distance
Total
length
Zinc alloy
PWWL0011B(LJ632B)
PWWL0010A(LJ619A) 224 245 16 B
384 406 16 A
Code HeightGradeHole
distance
Total
length
Zinc & aluminium alloy
PWWL0010B(LJ619B)
PWWL0015A(LJ649A) 66 30 B
Code Height GradeHole
distance
Total
length
Zinc alloy
PWWL0015B(LJ649B) 160 183 35 B
Code Height GradeHole
distance
Total
length
Zinc alloy
PWWL0022(LJ667) 128 144 37 A
Code Height GradeHole
distance
Total
length
Zinc alloy & ceramic
PWWL0019(LJ654) 16 50 26 C
Code Height GradeHole
distance
Total
length
Zinc alloy
120 25 C
Code Height GradeHole
distance
Total
length
96
PWWL0070
(WWLD142)
40 29 B
Code Height GradeHole
distance
Total
length
PWWL0069
(WWLC141)
single
PWWL0181 160 172.5 30 B
Code Height Grade
Hole
distance
Total
length
HANDLES & KNOBS
Handle & Knob
PWWL0016B(LJ650B) 76 122 32 B
Code Height GradeHole
distance
Total
length
Zinc alloy & ceramic
PWWL0023(LJ801) 76 122 29 B
Code HeightGradeHole
distance
Total
length
Zinc alloy & ceramic
PWWL0121(LJ803) 32 25 C
Code Height GradeHole
distance
Total
length
Zinc alloy & ceramic
PWWL0024A(LJ804A) 76 35 B
Code Height GradeHole
distance
Total
length
Iron
PWWL0024B(LJ804B) 160 175 20 A
Code Height GradeHole
distance
Total
length
Iron
PWWL0053B
(WWLA124B) 438 72.5
Code HeightGradeHole
distance
Total
length
320 AA
Zinc alloy
PWWL0051
(WWLB122) 160 200 34
Code Height GradeHole
distance
Total
length
A
Zinc alloy & acrylic
PWWL0033
(WWLC101) 128 157 29 B
Code Height GradeHole
distance
Total
length
Zinc alloy
PWWL0050B
(WWLC121B)
96 123 25 B
Code Height GradeHole
distance
Total
length
Zinc alloy
PWWL0026
(WWLC75) 95 120 32 B
Code Height Grade
Hole
distance
Total
length
Zinc alloy & ceramic
PWWL0013A(LJ641A) 128 200 14 B
192 300 14 B
320 400 14 B
384 500 14 A
512 600 14 A
704 800 14 AA
Code Height GradeHole
distance
Total
length
Aluminium alloy
PWWL0013B(LJ641B)
PWWL0013C(LJ641C)
PWWL0013D(LJ641D)
PWWL0013E(LJ641E)
PWWL0013F(LJ641F)
PWWL0116A 96 110 24
Code Height GradeHole
distance
Total
length
C
PWWL0172 160 170 31
Code Height GradeHole
distance
Total
length
A
PWWL0166 160 197.6 28 B
Code Height GradeHole
distance
Total
length
PWWL0173 35 20 C
Code Height GradeHole
distance
Total
length
96 133.6 28 B
Code Height Grade
Hole
distance
Total
length
36 22.5 C
Code Height Grade
Hole
distance
Total
length
PWWL0166A
Single PWWL0174 Single
Only suitable for YMG007(P-08)
PWWL0012A(LJ634A) 224 242 22 C
384 402 22 B
576 595 22 B
Code Height GradeHole
distance
Total
length
Aluminium alloy
PWWL0012B(LJ634B)
PWWL0012C(LJ634C)
Zinc alloy
Zinc alloy Zinc alloy
Zinc alloy Zinc alloy Zinc alloy
Zinc alloy Zinc alloy Zinc alloy
43. PWWL0042A
(WWLD113A)
40 28 C
Code Height GradeHole
distance
Total
length
Zinc alloy
PWWL0042B
(WWLD113B) 136 27 C
Code Height GradeHole
distance
Total
length
96
Zinc alloy
Page 070
HANDLES & KNOBS
Handle & Knob
Page 071
HANDLES & KNOBS
PWWL0034B
(WWLC102B)
64 90 19 B
Code Height GradeHole
distance
Total
length
Zinc alloy
PWWL0034A
(WWLC102A) 57 21 B
Code Height Grade
Hole
distance
Total
length
32
Zinc alloy
PWWL0028
(WWLD80) 38 35 C
Code Height GradeHole
distance
Total
length
Zinc alloy & ceramic
PWWL0029
(WWLD86) 43 34 C
Code Height GradeHole
distance
Total
length
Zinc alloy
PWWL0040
(WWLC111)
160 175 21 B
Code Height GradeHole
distance
Total
length
Zinc alloy
PWWL0032A
(WWLD93A)
30 27 C
Code Height GradeHole
distance
Total
length
PWWL0031A
(WWLD92A)
45 25 C
Code Height Grade
Hole
distance
Total
length
Zinc alloyZinc alloy
PWWL0031B
(WWLD92B) 96 112 28 C
Code Height GradeHole
distance
Total
length
Zinc alloy
PWWL0032B
(WWLD93B) 96 111 33 C
Code Height GradeHole
distance
Total
length
Zinc alloy
PWWL0053A
(WWLB124A) 192 247 29.5 A
Code Height GradeHole
distance
Total
length
Zinc alloy
PWWL0054
(WWLD125) 96 146 25.5 C
Code Height GradeHole
distance
Total
length
PWWL0055A
(WWLC126A)
32 70 22 B
Code Height GradeHole
distance
Total
length
Zinc alloy & ABSZinc alloy
PWWL0055B
(WWLC126B) 120 26
Code Height GradeHole
distance
Total
length
96 B
Zinc alloy & ABS
PWWL0036B
(WWLC105B)
96 134 29 B
Code Height GradeHole
distance
Total
length
PWWL0036A
(WWLC105A)
37 29 B
Code Height GradeHole
distance
Total
length
Zinc alloy Zinc alloy
Not suitable for YMM007(YMM21),YMM013(TMM39),
YMM017(YMM43) door style.
PWWL0058
(WWLD129)
140 25 C
Code Height GradeHole
distance
Total
length
96
Zinc alloy
Handle & Knob
PWWL0037A
(WWLB106A)
57 29 A
Code Height GradeHole
distance
Total
length
PWWL0038
(WWLD107)
128 168 26 C
Code Height GradeHole
distance
Total
length
PWWL0037B
(WWLB106B) 96 136 35 A
Code Height GradeHole
distance
Total
length
Zinc alloy & carnelian Zinc alloy & carnelian Zinc alloy
PWWL0041
(WWLD112) 76 38 C
Code Height GradeHole
distance
Total
length
PWWL0014A(LJ648A) 192 211 15 B
288 307 15 A
480 499 15 A
Code Height GradeHole
distance
Total
length
PWWL0044A
(WWLB115A) 40 22 A
Code Height GradeHole
distance
Total
length
16
Aluminium alloy Zinc alloy & crystal glassZinc alloy
PWWL0014B(LJ648B)
PWWL0014C(LJ648C)
PWWL0044B
(WWLA115B) 160 173 26 AA
Code Height GradeHole
distance
Total
length
PWWL0048B
(WWLA119B)
128 12 AA
Code Height GradeHole
distance
Total
length
PWWL0044C
(WWLA115C)
224 235 26 AA
Code Height GradeHole
distance
Total
length
Zinc alloy & crystal glass Zinc alloy & crystal glass Copper
PWWL0048A
(WWLB119A) 57 12 A
Code Height GradeHole
distance
Total
length
Copper
PWWL0043
(WWLC114) 128 146 28 B
Code Height GradeHole
distance
Total
length
PWWL0050C
(WWLB121C)
128 151.5 27.5 A
Code Height GradeHole
distance
Total
length
Zinc alloyZinc alloy
PWWL0050A
(WWLD121A)
35 29 C
Code Height GradeHole
distance
Total
length
PWWL0056
(WWLD127)
132 25.5 C
Code Height GradeHole
distance
Total
length
96
Zinc alloy Zinc alloy
PWWL0059
(WWLD130) 144.8 24.3 C
Code Height GradeHole
distance
Total
length
128
Zinc alloy
PWWL0060A
(WWLD131A)
25.4 22 C
Code Height GradeHole
distance
Total
length
Aluminium alloy
PWWL0057
(WWLC128)
183.6 32.8 B
Code Height GradeHole
distance
Total
length
128
Zinc alloy
PWWL0060C
(WWLA131C) 302 41 AA
Code Height GradeHole
distance
Total
length
224
238 41 A160
Aluminium alloy
PWWL0060B
(WWLB131B)
44. Page 072
HANDLES & KNOBS
Handle & Knob
Page 073
PWWL0062
(WWLD133)
168 21 C
Code Height GradeHole
distance
Total
length
128
Zinc alloy
PWWL0061A
(WWLC132A) 141.5 15 B
Code Height GradeHole
distance
Total
length
96
206160 15 B
Zinc alloy
PWWL0061B
(WWLC132B)
169 17 5. B
Code Height GradeHole
distance
Total
length
160PWWL0064
(WWLC135)144 25 B
Code Height GradeHole
distance
Total
length
128PWWL0063
(WWLC134)
Zinc alloy Zinc alloy
120 25 B
Code Height GradeHole
distance
Total
length
96
PWWL0065
(WWLC136)
Alu. alloy+ceramics
250 24 B
Code Height GradeHole
distance
Total
length
224
PWWL0066
(WWLC137)
Aluminum alloy
200 12 B
Code Height GradeHole
distance
Total
length
160
PWWL0067
(WWLC138)
Aluminum alloy
PWWL0175 64 89 20
Code Height GradeHole
distance
Total
length
C PWWL0176 128 170 32 B
Code Height GradeHole
distance
Total
length
PWWL0178 128 140 38.2 B
Code Height Grade
Hole
distance
Total
length
PWWL00179 128 147.8 34
Code Height GradeHole
distance
Total
length
B PWWL0180 128 168 28.6 B
Code Height GradeHole
distance
Total
length
HINGES & BUFFERS
Hinge & Buffer
PWWM0004(BM-J06)
Name
Code
Notes
PWWM0006(BM-J05)PWWM0005(WWMB19)
PWWM0027(WWMB03)
PWWM0001(BM-J13)
PWWM0029(BM-J09)PWWM0028(WWMB04)
PWWM0011(WWMB18)
PWWM0003(BM-J12)
PWWM0030(BM-J11) PWWM0032(BM-J15)PWWM0031(BM-J14)
Name
Code
Notes
Name
Code
Notes
Name
Code
Notes
Name
Code
Notes
Name
Code
Notes
Name
Code
Notes
Name
Code
Notes
Name
Code
Notes
Name
Code
Notes
Name
Code
Notes
Name
Code
Notes
BLUM quick assembly(half overlay)
For thickened half overlay doors,
thickness >22mm
BLUM quick assembly(full overlay)
For thickened full overlay doors,
thickness >22mm
BLUM standard hinge(half overlay)
For half overlay doors,
thickness≤22mm
BLUM built-in hinge
For built-in doors,
thickness≤22mm
BLUM standard hinge(full overlay)
For full overlay doors,
thickness≤22mm
BLUM 180° quick assembly
For linear corner cabinet
BLUM quick assembly(full overlay)
For full overlay doors,
thickness≤22mm
BLUM quick assembly(half overlay)
For half overlay doors,
thickness≤22mm
BLUM 45° quick assembly(full overlay)
For full-overlay door of equilateral
bevel cabinet
BLUM 175° insert assembly(full overlay)
For full-overlay door of normal
door and arch door.
BLUM bi-fold hinge
For corner cabinet with bi-fold door.
BLUM 175° insert assembly
Half overlay
For normal door panel or arch door
Zinc alloy Zinc alloy
Zinc alloy Zinc alloy Zinc alloy
45. Page 074 Page 075
HINGES & BUFFERSHINGES & BUFFERS
Hinge & Buffer
PWWM0041(WWMB32) PWWM0048(WWMB43)
Name
Code
Notes
Name
Code
Notes
Name
Code
Notes
Name
Code
Notes
Name
Code
Notes
Name
Code
Notes
PWWM0025
Name
Code
Notes
Name
Code
Notes
Name
Code
Notes
PWWZ0001(BM-H02) PWWZ0002A(BM-H03A) PWWZ0002B(BM-H03B)
PWWM0042(WWMB33) PWWM0043(WWMB34) PWWM0047(WWMB42)
BLUM 155 ° hinge(full overlay)
For cabinet with built-in drawer
or basket drawer
BLUM rebounding hinge(full overlay)
For 18-25mm thick full-overlay
rebounding door, matching with
magnetic rebounder.
BLUM rebounding hinge(half overlay)
For 18-25mm thick full-overlay
rebounding door,matching with
magnetic rebounder.
BLUM 110°quick assembly
Soft closing & full overlay
BLUM 110°quick assembly
Soft closing & half overlay
180°hinge
For corner cabinet
BLUM door buffer
Matching with hinge
without damper
BLUM door buffer(full overlay)
For BLUM quick assembly
full-overlay hinge
BLUM door buffer(half overlay)
For BLUM quick assembly
half-overlay hinge
Hinge & Buffer
Name
Code
Notes
Name
Code
Notes
PWWM0045(WWMB38) PWWM0046(WWMB41)
PWWM0016(WWMB36)
Name
Code
Notes
Name
Code
Notes
Name
Code
Notes
PWWM0040(WWMB29) PWWM0044(WWMB37)
PWWM0012(WWMB39) PWWM0013(WWMB40) PWWM0015(WWMB35)
Name
Code
Notes
Name
Code
Notes
Name
Code
Notes
Hettich hinge
For thickened full overlay doors,
thickness >22mm
Hettich hinge
For thickened half overlay doors,
thickness >22mm
Hettich hinge
For full overlay doors,
thickness≤22mm
Hettich 110° hinge
For half overlay doors,
thickness≤22mm
Hettich 180° hinge
For linear corner cabinet
Hettich 165° hinge
For arch door and cabinet with
built-in drawer(full overlay)
Hettich 165° hinge
For arch door and cabinet with
built-in drawer(half overlay)
Hettich 45° hinge
For full-overlay door of equilateral
bevel cabinet
46. Page 076 Page 077
HINGES & BUFFERS
PWWM0051 PWWM0052 BWWM0011
BWWM0012
DTC Hinge & Buffer
Name
Code
Notes
Name
Code
Notes
Name
Code
Notes
Name
Code
Notes
110° Fast Assembly Hinge
Matched door thickness≤22mm;
full overlay; opening angle:110°;
fast assembly; integrated buffer.
PWWZ0007
Name
Code
Notes
Long magnetic rebounder
Matching with free-handle
door panel
110° Fast Assembly Hinge
Matched door thickness≤22mm;
half overlay; opening angle:110°;
fast assembly; integrated buffer.
95° Fast Assembly Hinge
Matched door thickness>22mm;
full overlay;opening angle:95°;
fast assembly;integrated buffer.
95° Fast Assembly Hinge
Matched door thickness>22mm;
half overlay; opening angle:95°;
fast assembly; integrated buffer.
BWWM0009
Name
Code
Notes
180° Fast Assembly Hinge
For linear corner cabinet only;
matched door thickness≤22mm;
opening angle:100°; fast assembly;
integrated buffer.
BWWM0010
Name
Code
Notes
155° Fast Assembly Hinge
For arc-door cabinets with drawers;
matched door thickness:18~25mm;
full overlay; opening angle:155°;
fast assembly; integrated buffer.
PWWM0056 BWWM0013
Name
Code
Notes
Name
Code
Notes
135° Fast Assembly Hinge
For folding-door cabinets;
matched door thickness≤22mm;
full overlay; opening angle:60°.
Rebounding Full Overlay Hinge
Matched door thickness≤22mm;
full overlay;opening angle:110°;
matching rebounder BWWZ002.
PWWM0008
Name
Code
Notes
45° soft closing
Suitable for beveled cabinets
BWWZ0002
Name
Code
Notes
Long magnetic rebounder
Matching rebounding
& full overlay hinge
DRAWERS & SLIDES
NotesCode Carcase net depth
-Soft closing
-Bottom panel thickness: 16mm
PWWWC001FA
(WWWC09) 465mm D 515mm≤ <
D≥515mm
Drawer front height
130mm ≤H <222mm
NotesCarcase net depth
465mm ≤D <515mm
D≥515mm
222mm ≤H <310mm
NotesCarcase net depth
-Soft closing
-Bottom panel thickness: 16mm
-Matching white & frosted tempered glass
465mm ≤D <515mm
D≥515mm
H ≥310mm
NotesCarcase net depth
285mm ≤D <365mm
365mm ≤D <415mm
H ≥310mm
Drawers
Drawer front height
Drawer front height
-Soft closing
-Bottom panel thickness: 16mm
-Soft closing
-Bottom panel thickness: 16mm
-Excluding white & frosted tempered glass
L
Drawer Interior
Panel Height
Slide
length
84mm 450mm
84mm 500mm
Code Slide
length
135mm 450mm
135mm 500mm
Code Slide
length
199mm 450mm
199mm 500mm
Drawer front heightCode Slide
length
199mm 270mm
199mm 350mm
L
L
L
Drawer Interior
Panel Height
Drawer Interior
Panel Height
Drawer Interior
Panel Height
PWWWC001GA
(WWWC10)
PWWWC001FB
(WWWC11)
PWWWC001GB
(WWWC12)
PWWWC001FC
(WWWC13)
PWWWC001GC
(WWWC14)
PWWWC001BC
(WWWC21)
PWWWC001DC
(WWWC22)