4. • The Advance Solar System joins two incomplete
technologies, the heat pump and the solar
thermal collector.
• Heat pumps are quite efficient equipment but
the heat they produce from their renewable
component varies only according to oscillations
in the temperature of the environment.
• Solar thermal collectors are the best source of
heat on hot and sunny days but they are totally
inefficient whenever there is no sun.
5. • The Advance solar water heating technology,
through an identical physical diagram to that
of a regular solar thermal system with forced
circulation and sharing some of the
components of a heat pump, managed to
surpass the limitations of the referred two
incomplete technologies.
• Through the cooling liquid (R134a or R407c)
which covers a closed circuit, the liquid goes
into the solar panel and suffers the action of
sun, rain, wind, environment temperature and
other climate factors. During this process the
liquid gains heat in a more favourable way
than a heat pump.
6. • After this stage, the heat is transferred to an
exchanger with the help of a small
compressor, which heats the water. The liquid
cools own and the circuit is repeated.
• As the fluid has a boiling temperature of
approximately -30ºC, the system works even
when there is no sun and it even works at
night, providing hot water at 55ºC, 24 hours a
day, unlike the traditional thermal solar
system.
9. Solar Box
• The unit of advance solar water heating
system consists of the following main
component, a low consumption compressor,
which is responsible for the circulation of the
liquid throughout the whole system, a heat
exchanger that dissipates heat into water for
consumption or the closed heating circuit and
an expansion component that reduce the
boiling temperature from approximately -300 C
so that it can go back to the solar panel and
capture the heat again
10. Solar box is an interface in between
the system and user
• System Status
• Temperature information from respective sensor
• System programming (daily/weekly/etc)
• Date & Time information
• Simplified parameterization
• Easy to control through touch screen panel
• Outlet water temperature test
• 12 predefined configuration
• Integration in three circuits (circulator pump)
• 4 temperature sensors
11.
12.
13. Solar thermal collector
• Made up of anodized aluminium with coating,
• Not to heavy – only 10 kg easy to install,
• Dimension : 2m X 0.8m,
• No Glass, rubber or fragile materials,
• No risk of over heating,
• No risk of freezing ,
• High resistance in saline atmosphere,
14. • High resistance to humidity,
• It can be install from 10º TO 85º as horizontal
or vertical.
• It can be install on the roof, wall , in the
garden , etc .
• The Solar thermal panel doesn't lose its
efficiency with time or with dirt.
• No need to clean estimated useful life of 25
years.
15.
16.
17.
18.
19.
20.
21.
22.
23.
24.
25.
26. Pressurize unvented hot water
cylinder
• A pressurize vessel for storage of hot water
with three tier safety inclusive of, temperature
pressure valve , expansion vessel & heat
source thermostats , made up of stainless
steel or enamelled glass lined , with 60 mm
p.u.f insulation.
27.
28.
29.
30.
31. Specification M Green D M Green X M Green Z
Capacity L/hr 39 60 107
Thermal Power mid/max W 900/2250 1400/3500 2500/6250
Consumption mid/max W 300/500 460/780 850/1400
Temperature Factory Set Point 0C 55 55 55
Maximum Temperature 0C 60 60 60
Max amount of water @ 400C in an
run
L 80(20-40℃) 120(20-40℃) 220(20-40℃)
Maximum Operation Temperature BAR 6 6 6
Number of Solar Thermal Collector Pcs 1 2 3
Liquid Line POL Φ9.52 Φ9.52 Φ9.52
Suction Line POL Φ12.7 Φ12.7 Φ12.7
Electrical Power Backup KW 2.5 3 5
Gross Weight of System (M,STC,C) KG 27,10,90 30,20,115 35,30,127
Electric Feed V/Hz 220-240/50 220-240/50 220-240/50
Cylinder Capacity L 300 400 500
32.
33. Compatibility
• Possibility of adapting the existing installation
without the need for civil construction works.
• Heat is captured through solar radiation,
environment temperature, rain, wind and even
snow
• The heat produce on colder days, even at night is
sufficient to attain the desired water temperature
• The solar thermal collector are light , discreet and
have versatility in terms of installation
