Diese Präsentation wurde erfolgreich gemeldet.
Wir verwenden Ihre LinkedIn Profilangaben und Informationen zu Ihren Aktivitäten, um Anzeigen zu personalisieren und Ihnen relevantere Inhalte anzuzeigen. Sie können Ihre Anzeigeneinstellungen jederzeit ändern.

jumpwire.io - IoT platform for Makers

Connect your Arduino to the cloud in 5 minutes, And make your IoT project succeed.

  • Loggen Sie sich ein, um Kommentare anzuzeigen.

jumpwire.io - IoT platform for Makers

  1. 1. Quick start
  2. 2. Setup hardware ● Arduino UNO ● ESP8266 wifi module
  3. 3. Download the framework ● https://github.com/jumpwire-io/Arduino-ESP8266/archive/master.zip ● Unzip and rename it to Arduino-ESP8266
  4. 4. Open Arduino-ESP8266.ino
  5. 5. Copy & paste sample code ● https://gist.github.com/028a705e7bc4be59f76b
  6. 6. Get your secret token ● https://console.jumpwire.io/
  7. 7. Set token, wifi ssid, wifi password
  8. 8. When uploading the code, temporarily disconnect PIN 0 (Arduino's RX pin) to avoid error. Upload the code to Arduino
  9. 9. Cut off power and reconnect ● This means resetting Arduino and ESP8266 at the same time ● It will be connected to the jumpwire.io server within 15 seconds.
  10. 10. ● Throw “1” from the console, LED will turn ON. ● Throw “0” from the console, LED will turn OFF. Test it
  11. 11. Blinking?
  12. 12. Congrats!
  13. 13. ● http://docs.jumpwire.io/ ○ How it works ○ How to Throw a message from Arduino ○ Troubleshooting For more info Thanks

×