2. Clevis Pins pg 1122
842
RIGGINGHARDWARE
Rigging Hardware
ARCO Clevis Pins
316 stainless steel construction
Part # Diameter
Working
Length
For
Series
ALE CPAF-3 3/16” 9/32” AF-3
ALE CPAF-4 3/16” 13/32” AF-4
ALE CPAF-5 1/4” 7/16” AF-5
ALE CPAF-6 5/16” 9/16” AF-6
ALE CPAF-7 5/16” 21/32” AF-7
ALE CPAF-8 3/8” 23/32” AF-8
ALE CPAF-9 7/16” 3/4” AF-9
ALE CPAF-10 7/16” 25/32” AF-10
ALE CPAF-12 1/2” 27/32” AF-12
Part # A Dia B C D
ALE AF-3 3/32” 3/16” 1/4" 7/64"
ALE AF-4 1/8” 3/16” 3/8" 3/16"
ALE AF-5 5/32” 1/4” 13/32" 15/64"
ALE AF-6 3/16” 5/16” 35/64" 1/4"
ALE AF-7 7/32” 5/16” 5/8" 19/64"
ALE AF-8 1/4” 3/8” 11/16" 5/16"
ALE AF-9 9/32” 7/16” 23/32" 21/64"
ALE AF-10 5/16" 7/16" 49/64" 11/32"
ALE AF-12 3/8" 1/2" 53/64" 3/8"
ARCO Aircraft Forks
316 stainless steel construction
ARCO Aircraft Eyes
316 stainless steel construction
Part # A Dia B C
ALE AE-3 3/32” 3/16” 1/8”
ALE AE-4 1/8” 3/16” 3/16”
ALE AE-5 5/32” 1/4” 3/16”
ALE AE-6 3/16” 5/16” 1/4”
ALE AE-7 7/32” 5/16” 9/32”
ALE AE-8 1/4” 3/8” 5/16”
ALE AE-9 9/32” 7/16” 11/32”
ALE AE-10 5/16” 7/16” 11/32”
ALE AE-12 3/8” 1/2” 3/8”
ARCO Marine Eyes
316 stainless steel construction
Part # Dia A B C
ALE ME-3 3/32” 1/4” 1/8”
ALE ME-4 1/8” 1/4” 3/16”
ALE ME-5 5/32” 5/16” 15/65”
ALE ME-6 3/16” 3/8” 5/16”
ALE ME-8 1/4” 1/2” 3/8”
ALE ME-7 7/32” 7/16” 3/8”
ALE ME-7-3/8 7/32” 3/8” 3/8”
ALE ME-8-7/16 1/4" 7/16" 3/8"
ALE ME-9 9/32” 1/2” 1/2”
ALE ME-10 5/16“ 1/2” 1/2”
ALE ME-10S 5/16” 5/8” 9/16”
ALE ME-12 3/8” 5/8” 5/8”
10. 850
RIGGINGHARDWARE
Johnson Marine Safe Lock Pelican Hooks
Adjusts in place with knurled nut, stamped metal construction
3-3/4" long from end of body to inside bearing point of hook.
1-1/4" adjustment
T-316 stainless steel
Machine Swage
JHD 24-301 3/16" wire
Hand Crimp
JHD 27-404 3/16" wire
Johnson Marine Tubular Pelican Hooks
Slender tubular design with a stamped hook. 4-3/4" long
from end of body to inside bearing point of hook.
1-1/2" adjustment
T-316 stainless steel
Machine Swage
JHD 21-304 1/8" wire
JHD 21-306 3/16" wire
Hand Crimp
JHD 26-403 1/8" wire
JHD 27-403 3/16" wire
Rigging Hardware
Part # Wire A B C D
BLU 616103 3/32”-1/8” 1-31/32” 1/2” 19/32” 9/32”
BLU 616105 5/32”-3/16” 3-15/32” 1” 1” 3/8”
BLU 616107 1/4”-9/32” 4-27/32” 1-23/64” 1-1/2” 19/32”
BLU 616110 5/16”-3/8” 5-15/16” 1-39/64” 1-1/2” 3/4”
Blue Wave
“T” Terminal Back Plates
Highly polished AISI 316 stainless steel construction
Blue Wave Stemball Terminals
Highly polished AISI 316 stainless steel construction
Part # Wire A B C
BLU 620003 1/8” 2-15/16” 2-1/8” 1-1/2”
BLU 620004 5/32” 2-23/32” 2-15/32” 1-49/64”
BLU 620005 3/16” 3-7/64” 2-27/32” 2”
BLU 620055 7/32” 3-11/32” 3-7/64” 2-5/16”
BLU 620063 1/4” 3-1/2” 3-17/64” 2-17/32”
BLU 620007 9/32” 3-45/64” 3-27/64” 2-3/4”
BLU 620008 5/16” 4-9/16” 4-1/4” 3-17/64”
BLU 620095 3/8” 5-5/64” 4-11/16” 3-1/2”
Johnson Marine Snap Gate Hook - "Over Centre"
Features the "Over Centre" design with
no load on the swinging hook when
closed. This feature allows easy opening
yet stays secure with heavy welded split
ring on the plunger latching device.
Investment cast T-316 Stainless
Adjustment: 1-1/4"
Part # Wire Thread Adjustment
Machine Swage
JHD 21-884 1/8" 1/4-28 LH 1-1/4"
JHD 21-886 3/16" 5/16-24 LH 1-1/4"
Body Only
JHD 21-80 - 5/16-24 LH -
JHD 21-80-1 - 5/16-24 RH -
JHD 21-81 - 1/4-28 RH -
Parts:
JHD 21-850 Repair kit for latch
Part # Wire
D
Pin L1 L2 A
Break
Load
BLU 190005 3/16” 3/8” 3” 2” 15/64” 7,700 lbs
Highly polished AISI 316 stainless steel construction
Blue Wave Swage Eye
Part # Wire A B
BLU 626204 1/8”-5/32” 11/32” 1-1/16”
BLU 626205 3/16” 7/16” 1-1/64”
BLU 626207 7/32”-9/32” 5/8” 1-1/64”
BLU 626212 5/16”-3/8” 25/32” 1-11/32”
Blue Wave Terminal Cups
Highly polished AISI 316 stainless steel construction
Sea-Dog Pelican Hooks
Sand cast bronze or investment cast 316 stainless steel.
Part # A B C D Finish
SED 189780 4" 1/2" 3/8" 9/16" Bronze
SED 189785 4" 1/2" 3/8" 3/4" S/S
SED 189785-1 4" 1/2" 3/8" 3/4" S/S
11. 851
RIGGINGHARDWARE
Rigging Hardware
Johnson Marine Single Gate Eyes, Threaded
A single eye is used on one end of the gate area to attach
the gate hook.
T-316 stainless steel
Machine Swage Threaded Eye
JHD 22-301 1/8" wire
JHD 22-303 3/16" wire
Hand Swage Threaded Eye
JHD 26-407 1/8" wire
JHD 27-407 3/16" wire
Johnson Marine Toggle Jaws
Same as the 25-316 only uses nut style instead
of "T" bolt.
1/4" pin
Machine Swage
JHD 25-304 1/8" wire
JHD 25-305 5/32" wire
JHD 25-306 3/16" wire
Hand Crimp
JHD 27-405 3/16" wire
JHD 26-405 1/8" wire
Johnson Marine
Interlocking Gate Eyes, Swivel
An interlocking gate eye is used at the opposite end
of the gate hook as a "hinge" for the gate.
T-316 stainless steel
Machine Swage Swivel Eye
JHD 22-312 1/8" wire
JHD 22-314 3/16" wire
Hand Swage Swivel Eye
JHD 27-410 3/16" wire
Johnson Marine Quick Release Lever
of 4,000 lbs. A positive stop is provided to prevent
pad makes it easier to close lever under load.
Wire size: 5/32, 3/16
Pin dia: 5/16"
Max. adjustment: 1-1/2"
QR throw: 2-5/8"
Pin to pin: 10-7/8" - 9-3/8"
JHD 14-210
Johnson Marine Turnbuckles
Tubular turnbuckle - Jaw to swage, hand crimp,
check nut locking.
1/4" pin
3" adjustment
T-316 stainless steel
Machine Swage
JHD 19-314 1/8" wire
JHD 19-316 3/16" wire
Hand Swage
JHD 26-412 1/8" wire
JHD 27-412 3/16" wire
Johnson Marine Gate Eyes, Interlocking Threaded
An interlocking gate eye is used at the opposite
end of the gate hook as a "hinge" for the gate.
T-316 stainless steel
Machine Swage Threaded Eye
JHD 22-302 1/8" wire
JHD 22-304 3/16" wire
Hand Swage Threaded Eye
JHD 26-408 1/8" wire
JHD 27-408 3/16" wire
Johnson Marine Turnbuckles
Open body turnbuckle - Jaw to swage, forged
silicon brass body with stainless steel ends.
3" adjustment
T-316 stainless steel
Machine swage
JHD 42-314 1/8" wire, 1/4" pin
JHD 42-316 3/16" wire, 1/4" pin
Johnson Marine Single Gate Eyes, Swivel
A single eye is used on one end of the gate area to
attach the gate hook.
T-316 stainless steel
Machine swage
JHD 22-311 1/8" wire
JHD 22-313 3/16" wire
Johnson Marine Stanchion Terminals
Used to terminate cable at stanchion.
Machine swage
JHD 25-306-5F For 3/16” wire (a)
JHD 100-110-1 For 1/8” wire (b)
Johnson Marine "T" Toggle Jaws
Generally used at the stern rail when no gate is
required with a turnbuckle forward.
1/4" pin
Machine swage
JHD 25-314 1/8" wire
JHD 25-316 3/16" wire
12. 852
RIGGINGHARDWARE
Johnson Marine Locking Nuts
T-316 stainless steel
Part #
Thread
Size
Series
Used On
JHD 35-606 5/16-24 L.H. 5 & 7
JHD 35-607 3/8-24 R.H. 6 & 8
Johnson Marine Life Line Studs
T-316 stainless steel
Part #
Thread
Size
Wire
Size Thread
Machine Swaging
JHD 30-603 1/4-28 x 2-1/2" 1/8" Left
JHD 30-603-1 1/4-28 x 2-1/2" 1/8" Right
JHD 30-604 10-32 x 3" 1/8" Right
JHD 30-604-1 10-32 x 3" 1/8" Left
JHD 30-605 1/4-28 x 2-1/2" 1/8" Left
JHD 30-606 5/16-24 x 3/8" 3/16" Left
JHD 30-607 5/16-24 x 2" 3/16" Left
JHD 30-607-1 5/16-24 x 2" 3/16" Right
JHD 30-608 1/4-28 x 2-1/2" 3/16" Left
JHD 30-608-1 1/4-28 x 2-1/2" 3/16" Right
JHD 30-610 1/4-28 x 2-1/2" 3/16" Left
Hand Crimp
JHD 31-603 1/4-28 x 2-1/2" 1/8" Left
JHD 31-603-1 1/4-28 x 2-1/2" 1/8" Right
JHD 31-605 5/16-24 x 3/8" 3/16" Left
JHD 31-606 5/16-24 x 1-1/2" 3/16" Left
JHD 31-607 1/4-28 x 2-1/2" 3/16" Left
JHD 31-608 1/4-28 x 2-1/2" 3/16" Left
Johnson Marine Pulpit Anchor
Can be used on the stern rail and bow pulpit to
1/2" hole
JHD 29-501
Johnson Marine Stanchion Eye
Used on a stanchion for adding lower lifelines
without the need to drill holes.
5/16" hole
JHD 29-502
Johnson Marine Gate Stops
Stainless steel gate stops with set-screws
Part # Wire Size Coated
JHD 29-505 1/8" 5/16"
JHD 29-506 3/16" 3/8"
Rigging Hardware
Johnson Marine Conversion Sleeves
Conversion sleeve used with 1/8" cable allows 3/16" lifeline
JHD 36-610 Machine crimp
JHD 36-611 Hand crimp
Johnson Marine Adjusters
Generally used at the stern rail in conjunction with the single eye
to tension that section of the gate. 1/4" pin, 1" adjustment.
T-316 stainless steel
Machine Swage
JHD 23-303 1/8" wire
JHD 24-303 3/16" wire
Hand Crimp
JHD 26-406 1/8" wire
JHD 27-406 3/16" wire
Johnson Spliced Line Fittings
for today’s high-tech, low stretch line. Johnson recommends
8mm Dyneema line in grey and blue. This line is a 12 strand
single braid, 1/7th the weight of 1/4” 1x19 cable, offering the
same strength at about the same cost. Johnson recommends
changing out the line at 3 year intervals. Professional splicing
recommended.
JHD LS-2100 Over centre gate hook with eye*
JHD LS-2200
JHD LS-2500 Toggle Jaw with eye
JHD LS-4200 Open body turnbuckle with eye
* Body Investment Cast in China
Line sold seperately
13. 853
RIGGINGHARDWARE
Rigging Hardware
Sea-Dog Jaw & Jaw Turnbuckles
Heavy galvanized open body turnbuckles
Part # A B C D E
SED 186100 1/4" 7-1/2" 11-1/2" 1/4" 3/8"
SED 186110 5/16" 8-7/8" 13-1/4" 1/4" 1/2"
SED 186121 3/8" 10-1/2" 16-1/2" 5/16" 1/2"
SED 186131 1/2" 12-1/2" 18-1/2" 3/8" 5/8"
Cruiser 316 Stainless Steel Pipe Turnbuckles
Part # Size
L
mm
L1
mm
A
mm
D
mm
Break
Load
CRU 330119 5 mm 80 130 6.5 5 1,000 kgs
CRU 330120 6 mm 95 150 7.5 6 1,500 kgs
CRU 330121 8 mm 105 180 11.0 8.57 3,000 kgs
CRU 330122 10 mm 125 220 12.0 9 4,300 kgs
CRU 330123 12 mm 150 270 14.0 12 6,500 kgs
CRU 330131* 16 mm 190 360 17.0 16 9,500 kgs
* Request Item
Johnson Marine Rigging Toggles
These stainless steel rigging toggles are essential to prevent
misalignment of rigid jaw turnbuckles. They are also used as a
simple way to save rigging that was made too short.
T-316 stainless steel
Part # A B C D E F G
Rigging Toggles
JHD 12-120 1/4” 1/4” .094 5/16" 1” 5/16 5/8”
JHD 12-121 5/16” 5/16" .094 19/64” 1-1/4” 11/32” 5/8”
JHD 12-122 3/8” 3/8" .141 23/64” 1-5/8” 13/32 3/4”
JHD 12-123 1/2" 1/2" .187 31/64” 1-7/8” 17/32” 1”
JHD 12-124 5/8" 5/8" 1/4” 39/64” 2-1/4” 11/16” 1-1/4”
Double Jaw Toggles
JHD 12-320 1/4" 1/4" 13GA 5/8" 1/4" 1-1/16" 1/2"
12-320
14. 854
RIGGINGHARDWARE
Sea-Dog Stainless Steel Thimbles
Stamped 304 stainless steel
Part #
Wire
Size
Inside
Length
Inside
Width
Heavy Duty
SED 170002-1 3/32", 1/16" 21/32" 3/8"
SED 170003-1 1/8" 11/16" 3/8"
SED 170005-1 3/16", 7/32" 13/16" 1/2"
SED 170006-1 1/4" 1-1/16" 19/32"
SED 170008-1 5/16" 1-1/2" 7/8"
SED 170009-1 3/8" 1-19/32" 15/16"
SED 170010-1 7/16" 1-7/8" 15/16"
SED 170012-1 1/2" 2-1/8" 1-1/8"
SED 170016-1 5/8" 2-5/8" 1-9/16"
Light Duty
SED 171206 1/4" 15/16" 1/2"
SED 171208 5/16" 1-5/16" 13/16"
SED 171210 3/8" 1-5/8" 1"
SED 171212 1/2" 1-15/16" 1-1/8"
SED 171216 5/8" 2-5/16" 1-1/2
Wire Rope Clips / Thimbles
Part # Wire Size A2 L1 L2
BLU 110002 3/32" 3/8” 29/32” 21/32”
BLU 110003 1/8” 3/8” 1” 11/16”
BLU 110004 5/32” 7/16” 1-3/32” 25/32”
BLU 110005 3/16” 1/2” 1-1/4” 13/16”
BLU 110006 1/4” 19/32” 1-19/32” 1-1/16”
BLU 110007 9/32” 3/4” 1-25/32” 1-9/32”
BLU 110008 5/16” 7/8” 2” 1-1/2”
BLU 110009 3/8” 15/16” 2-9/32” 1-19/32”
BLU 110010 7/16” 1-11/16” 2-9/16” 1-7/8”
BLU 110012 1/2” 1-1/8” 2-3/4” 2-1/8”
BLU 110014 9/16” 1-1/4” 3-7/64” 2-1/4”
BLU 110016 5/8” 1-9/16” 3-17/32” 2-5/8”
BLU 110018 19/32" 1-3/4" 3-29/32" 3"
BLU 110020 3/4” 2” 4-17/32” 3-5/16”
Blue Wave Thimbles
High polished AISI 316 stainless steel
Cruiser Stainless Steel Wire Rope Clips
316 stainless steel
CRU 330117 1/8"
CRU 330003 3/16"
CRU 330118 1/4"
CRU 330127 5/16"
CRU 330142 3/8"
Crosby Wire Rope Clips
Top quality wire rope clips are fully galvanized
with a forged base and rolled threads.
For wire size in inches
CRO G450-3/8"*
CRO G450-5/8"*
CRO G450-3/4"*
* Request Items
Sea-Dog Stainless Steel Wire Rope Clips
Investment cast 316 stainless steel body
AISI 304 stainless U-Bolt
Metric threads
Part # A B C Wire Size
SED 159502-1 11/16" 9/16" 3 mm 3/32", 2 mm
SED 159503-1 15/16" 5/8" 3 mm 1/8", 3 mm
SED 159504-1 15/16" 3/4" 4 mm 5/32", 4 mm
SED 159506-1 1-1/4" 1-1/16" 6 mm 1/4", 6 mm
SED 159508-1 1-5/8" 1-3/8" 8 mm 5/16", 8 mm
SED 159510-1 2" 1-3/4" 10 mm 3/8", 10 mm
SED 159512 2-1/2" 1-15/16" 12 mm 7/16", 12 mm
Import Wire Rope Clips
Galvanized malleable iron wire rope clips
Available for rope sizes from 3/16" to 1"
LOG 3/16"
LOG 1/8"
LOG 1/4"
LOG 5/16"
LOG 3/8"
LOG 7/16"
LOG 1/2"
LOG 5/8"
LOG 3/4"
LOG 7/8"
LOG 1"
15. 856
RIGGINGHARDWARE
Cruiser 316 Stainless Steel Twisted Shackles
CRU 300092 3/16"
CRU 300091 1/4"
CRU 300150 5/16"
Sea-Dog
Stainless Steel Anchor Shackles
Investment cast 316 stainless steel
Part # A B C D
SED 147054-1 3/16" 5/16" 9/16" 11/16"
SED 147056-1 1/4" 1/2" 13/16" 1-1/16"
SED 147058-1 5/16" 5/8" 1-1/8" 1-7/16"
SED 147060-1 3/8" 13/16" 1-3/8" 1-13/16"
SED 147062-1 1/2" 1" 1-11/16" 2-5/16"
Sea-Dog
Stainless Steel Chain Shackles
Investment cast 316 stainless steel
Part # A B C
SED 147004-1 3/16" 7/16" 9/16"
SED 147006-1 1/4" 1/2" 13/16"
SED 147008-1 5/16" 5/8" 1-1/8"
SED 147010-1 3/8" 13/16" 1-3/8"
SED 147012-1 7/16" 1" 1-5/8"
Sea-Dog Stainless Steel Anchor Shackles
Forged 316 stainless steel
Part # A B C D
Breaking
Strength
SED 147206 1/4" 1/2" 13/16" 1-1/4" 3,300 lbs
SED 147210 3/8" 13/16" 1-1/4" 2" 9,900 lbs
Shackles
Cruiser 316 Stainless Steel Long Shackles
CRU 300162 3/16"
CRU 300149 1/4"
CRU 300154 5/16"
CRU 300145 13/32"
Cruiser 316 Stainless Steel "D" Shackles
CRU 300147 3/16"
CRU 300044 1/4"
CRU 300089 5/16"
CRU 300058 3/8"
CRU 300088 1/2"
Cruiser 316 Stainless Steel Anchor Shackles
CRU 300052 3/16"
CRU 300043 1/4"
CRU 300061 5/16"
CRU 300085 3/8"
CRU 300087 1/2"
Sea-Dog Stainless Steel “D” Shackles
Forged 316 stainless steel
Part # A B C
Breaking
Strength
SED 147104 3/16" 7/16" 11/16" 2,200 lbs
SED 147106 1/4" 1/2" 3/4" 3,300 lbs
SED 147108 5/16" 11/16" 1-1/4" 6,600 lbs
Crosby Galvanized Shackles
Hot dip galvanized shackles
Forged, quenched and tempered with
alloy pins
Safe working load is permanently shown
on every shackle
Available in either the anchor shackle or chain shackle patterns
Anchor
Shackles
inches
Chain
Shackles
inches
Safe
Working
Load Tons
CRO G209-1/4 CRO G210-1/4 1/2
CRO G209-5/16 CRO G210-5/16 3/4
CRO G209-3/8 CRO G210-3/8 1
CRO G209-7/16 CRO G210-7/16 1-1/2
CRO G209-1/2 CRO G210-1/2 2
CRO G209-5/8 CRO G210-5/8 3-1/4
CRO G209-3/4 - 4-3/4
CRO G209-7/8 - 6-1/2
CRO G209 1 - 8-1/2
CRO G209 1-1/8 - 9-1/2
209 210
Sea-Dog Galvanized Anchor Shackles
Forged hot dipped galvanized
Display packaged each
SED 147806-1 1/4"
SED 147808-1 5/16"
SED 147810-1 3/8"
Titan Load Rated Sackles
16. 856
RIGGINGHARDWARE
Cruiser 316 Stainless Steel Twisted Shackles
CRU 300092 3/16"
CRU 300091 1/4"
CRU 300150 5/16"
Sea-Dog
Stainless Steel Anchor Shackles
Investment cast 316 stainless steel
Part # A B C D
SED 147054-1 3/16" 5/16" 9/16" 11/16"
SED 147056-1 1/4" 1/2" 13/16" 1-1/16"
SED 147058-1 5/16" 5/8" 1-1/8" 1-7/16"
SED 147060-1 3/8" 13/16" 1-3/8" 1-13/16"
SED 147062-1 1/2" 1" 1-11/16" 2-5/16"
Sea-Dog
Stainless Steel Chain Shackles
Investment cast 316 stainless steel
Part # A B C
SED 147004-1 3/16" 7/16" 9/16"
SED 147006-1 1/4" 1/2" 13/16"
SED 147008-1 5/16" 5/8" 1-1/8"
SED 147010-1 3/8" 13/16" 1-3/8"
SED 147012-1 7/16" 1" 1-5/8"
Sea-Dog Stainless Steel Anchor Shackles
Forged 316 stainless steel
Part # A B C D
Breaking
Strength
SED 147206 1/4" 1/2" 13/16" 1-1/4" 3,300 lbs
SED 147210 3/8" 13/16" 1-1/4" 2" 9,900 lbs
Shackles
Cruiser 316 Stainless Steel Long Shackles
CRU 300162 3/16"
CRU 300149 1/4"
CRU 300154 5/16"
CRU 300145 13/32"
Cruiser 316 Stainless Steel "D" Shackles
CRU 300147 3/16"
CRU 300044 1/4"
CRU 300089 5/16"
CRU 300058 3/8"
CRU 300088 1/2"
Cruiser 316 Stainless Steel Anchor Shackles
CRU 300052 3/16"
CRU 300043 1/4"
CRU 300061 5/16"
CRU 300085 3/8"
CRU 300087 1/2"
Sea-Dog Stainless Steel “D” Shackles
Forged 316 stainless steel
Part # A B C
Breaking
Strength
SED 147104 3/16" 7/16" 11/16" 2,200 lbs
SED 147106 1/4" 1/2" 3/4" 3,300 lbs
SED 147108 5/16" 11/16" 1-1/4" 6,600 lbs
Crosby Galvanized Shackles
Hot dip galvanized shackles
Forged, quenched and tempered with
alloy pins
Safe working load is permanently shown
on every shackle
Available in either the anchor shackle or chain shackle patterns
Anchor
Shackles
inches
Chain
Shackles
inches
Safe
Working
Load Tons
CRO G209-1/4 CRO G210-1/4 1/2
CRO G209-5/16 CRO G210-5/16 3/4
CRO G209-3/8 CRO G210-3/8 1
CRO G209-7/16 CRO G210-7/16 1-1/2
CRO G209-1/2 CRO G210-1/2 2
CRO G209-5/8 CRO G210-5/8 3-1/4
CRO G209-3/4 - 4-3/4
CRO G209-7/8 - 6-1/2
CRO G209 1 - 8-1/2
CRO G209 1-1/8 - 9-1/2
209 210
Sea-Dog Galvanized Anchor Shackles
Forged hot dipped galvanized
Display packaged each
SED 147806-1 1/4"
SED 147808-1 5/16"
SED 147810-1 3/8"
Titan Load Rated Shackles
17. 857
RIGGINGHARDWARE
Shackles
Sea-Dog Stamped Stainless Steel "D" Shackle
304 stainless steel
Part # A B C
Breaking
Strength
SED 140082 5/16" 3/4" 1-5/8" 6,600 lbs
Sea-Dog Twisted Shackles
Forged 316 stainless steel
Part # A B C
Breaking
Strength
SED 147406-1 1/4" 1/2" 1-13/16" 3,300 lbs
SED 147408-1 5/16" 5/8" 2-1/4" 6,600 lbs
Sea-Dog Sailmaker “D” Shackle
Stamped 304 stainless steel
Breaking strength: 2640 lbs
SED 140153
Part # D A L Break Load
BLU 180005 3/16” 9/32” 1-13/32” 2,200 lbs
BLU 180006 15/64" 9/32" 1-9/16" 3,650 lbs
BLU 185205 3/16” 1/2” 1” 2,200 lbs
Blue Wave Key Pin Shackles
High polished AISI 316 stainless steel construction
Part # D1 A L1 L2 Break Load
BLU 180305 3/16" 19/32" 13/16" 7/16" 1,500 lbs
BLU 180306 15/64" 9/16" 1" 7/16" 3,300 lbs
Blue Wave Rigging
Halyard Shackles
High polished AISI 316 stainless steel
construction
Part # D A L Break Load
BLU 150051 3/16” 7/16” 11/16” 2,200 lbs
BLU 150052 3/16” 5/8” 15/16” 2,200 lbs
BLU 150053 3/16” 5/8” 1-13/32” 2,400 lbs
BLU 155251 3/16” 17/32” 1” 2,400 lbs
Blue Wave “D” Shackles
High polished AISI 316 stainless
steel construction
Sea-Dog Fixed Pin Stainless Steel Halyard Shackle
Stamped 304 stainless steel, loose pin style
Breaking strength: 1,540 lbs
SED 140235
Sea-Dog Stainless Steel Long Chain Shackles
Forged 316 stainless steel
Part # A B C
Breaking
Strength
SED 147153-1 5/32" 5/16" 1-5/16" 1,540 lbs
SED 147154-1 3/16" 7/16" 1-1/2" 2,200 lbs
SED 147156-1 1/4" 1/2" 1-13/16" 3,300 lbs
SED 147158-1 5/16" 11/16" 2-7/16" 6,600 lbs
SED 147160-1 3/8" 15/16" 3" 9,900 lbs
Sea-Dog Stamped Stainless Steel Bow Shackle
304 stainless steel
Part # A B C D
Breaking
Strength
SED 140108 5/16" 11/16" 1-1/4" 11/16" 4,400 lbs
18. 858
RIGGINGHARDWARE
Harken Forged Stainless Shackles
These shackles are electric forged out of 316 and 17-4 PH stainless steel and polished to a high lustre. Safe working loads are no more
than half the minimum breaking strength.
Harken "D" Shackles (316 Stainless)
Part # Size Shackle Pin A B SWL Breaking Strength
HAR 2108 6 mm 1/4" 3/4" 9/16" 1650 lbs 3,300 lbs
HAR 2115 8 mm 5/16" 1" 11/16" 3040 lbs 6,080 lbs
HAR 2122 10 mm 13/32" 1-1/4" 13/16" 4870 lbs 9,740 lbs
HAR 2123* 10 mm "HR" 13/32" 1-1/4" 13/16" 8210 lbs 16,420 lbs
HAR 2126 12 mm 1/2" 1-1/2" 15/16" 7120 lbs 14,240 lbs
*High Resistance
Harken Bow Shackles (316 Stainless)
Part # Size Shackle Pin A B C SWL Breaking Strength
HAR 2103 5 mm 3/16" 1" 3/8" 11/16" 1190 lbs 2,380 lbs
HAR 2110 6 mm 1/4" 1-1/16" 9/16" 3/4" 1650 lbs 3,300 lbs
HAR 2117 8 mm 5/16" 1-1/2" 11/16" 1-1/8" 3040 lbs 6,080 lbs
HAR 2124 10 mm 13/32" 1-7/8" 7/8" 1-1/4" 4870 lbs 9,740 lbs
Harken Long Shackles (316 Stainless)
Part # Size Shackle Pin A B SWL Breaking Strength
HAR 2104 5 mm 3/16" 1-1/2" 3/8" 1190 lbs 2,380 lbs
HAR 2111 6 mm 1/4" 1-3/4" 1/2" 1650 lbs 3,300 lbs
HAR 2118 8 mm 5/16" 2-1/4" 5/8" 3040 lbs 6,080 lbs
Harken Large Opening Shackles (316 Stainless)
Part # Size Shackle Pin A B SWL Breaking Strength
HAR 2106 5 mm 3/16" 1-5/16" 13/16" 770 lbs 2,200 lbs
Harken Twist Shackles (316 Stainless)
Part # Size Shackle Pin A B SWL Breaking Strength
HAR 2105 5 mm 3/16" 1-7/16" 3/8" 1190 lbs 2,380 lbs
HAR 2112 6 mm 1/4" 1-1/8" 1/2" 1650 lbs 3,300 lbs
HAR 2119 8 mm 5/16" 1-5/8" 11/16" 3040 lbs 6,080 lbs
HAR 2125 10 mm 13/32" 1-7/8" 3/4" 4870 lbs 9,740 lbs
Harken Shallow Bow Shackle (316 Stainless)
Part # Size Shackle Pin A B C SWL lbs. Breaking Strength
HAR 2132 5mm 3/16” 11/16” 7/16” 9/16” 1190 2,380 lbs
Harken Captive Halyard Shackle (316 Stainless)
Part # Shackle Pin A B D
HAR 2107 3/16" 1-3/8" 9/16" 9/16"
Shackles
19. 859
RIGGINGHARDWARE
Shackles
Gloma
Long ‘D’ Shackles
Forged 316 stainless steel
Part # Pin Dia. Inside W Inside L Break Load
GLO 201 5/32” 5/16” 1-5/16” 2,420 lbs
GLO 202 3/16” 7/16” 1-5/8” 2,860 lbs
GLO 203 1/4” 1/2” 1-7/8” 4,400 lbs
GLO 204 5/16” 11/16” 2-3/8” 9,460 lbs
GLO 205 3/8” 7/8” 2-7/8” 14,740 lbs
Gloma
'D’ Shackles
Forged 316 stainless steel
Part # Pin Dia. Inside W Inside L Break Load
GLO 101 5/32” 5/16” 11/16” 2,310 lbs
GLO 102 3/16” 3/8” 3/4” 3,300 lbs
GLO 103 1/4” 7/16” 13/16” 3,960 lbs
GLO 104 5/16” 11/16” 1-1/4” 9,460 lbs
GLO 105 3/8” 13/16” 1-3/8” 12,540 lbs
GLO 106 1/2” 1” 1-9/16” 17,600 lbs
Gloma
Bow Shackles
Forged 316 stainless steel
Part #
Pin
Dia.
Inside
Width
Inside
Bow
Inside
Length
Break
Load
GLO 301 5/32” 5/16” 5/8” 7/8” 1,980 lbs
GLO 302 3/16” 3/8” 11/16” 1” 2,640 lbs
GLO 303 1/4” 1/2” 13/16” 1-1/4” 3,960 lbs
GLO 304 5/16” 5/8” 1” 1-5/8” 9,460 lbs
GLO 305 3/8” 13/16” 1-3/16” 1-15/16” 13,640 lbs
GLO 306 1/2” 1” 1-1/2” 2-1/8” 18,480 lbs
Harken
Stamped Stainless Steel Shackles
Used on most of the small boat blocks
Useful for a wide range of applications
Part # Pin Dia. A B SWL Break Load
HAR 072 3/16" 1/2" 7/16" 1250 2500 lbs
HAR 138 1/4" 11/16" 5/8" 1500 3000 lbs
HAR 246 5/32" 7/16" 3/8" 600 1200 lbs
Harken
Stainless Steel U-Adapter Fittings
Used on most of the small boat blocks
Part # Pin Dia. A B SWL Break lbs
HAR 093 3/16" 1/2" 7/16" 1250 2500
HAR 1598 5/16" 1/2" 7/8" 1800 3600
Gloma
Captive Pin, ‘D’ Shackles
Forged 316 stainless steel
Part # Pin Dia. Inside W Inside L Break Load
GLO 101-I 5/32” 5/16” 11/16” 2,310 lbs
GLO 102-I 3/16” 3/8” 3/4” 3,300 lbs
GLO 103-I 1/4” 7/16” 13/16” 3,960 lbs
GLO 104-I 5/16” 11/16” 1-1/4” 9,460 lbs
GLO 105-I 3/8” 13/16” 1-3/8” 12,540 lbs
Gloma
Captive Pin, Long ‘D’ Shackles
Forged 316 stainless steel
Part # Pin Dia. Inside W Inside L Break Load
GLO 201-I 5/32” 5/16” 1-5/16” 2,420 lbs
GLO 202-I 3/16” 3/8” 1-5/8” 2,860 lbs
GLO 203-I 1/4” 1/2” 1-7/8” 4,400 lbs
GLO 204-I 5/16” 11/16” 2-3/8” 9,460 lbs
GLO 205-I 3/8” 7/8” 2-7/8” 14,740 lbs
21. 861
RIGGINGHARDWARE
Shackles
Wichard Captive Pin Twisted Shackles
Drop forged 316L stainless steel
Part # Dia ID Breaking Load
WIC 1422 3/16" 1-15/32" x 13/32" 3,310 lbs
WIC 1423 1/4" 1-3/4" x 15/32" 4,630 lbs
WIC 1424 5/16" 2-5/16" x 5/8" 8,160 lbs
WIC 1425 13/32" 2-15/16" x 25/32" 11,465 lbs
Wichard Captive Pin Anchor Shackles
Drop forged 316L stainless steel
Part # Dia ID Breaking Load
WIC 1441 5/32" 11/16" x 5/16" 1,985 lbs
WIC 1442 3/16" 29/32" x 13/32" 3,310 lbs
WIC 1443 1/4" 1-1/16" x 15/32" 4,630 lbs
WIC 1444 5/16" 1-15/32" x 5/8" 8,160 lbs
WIC 1445 13/32" 1-13/16" x 25/32" 11,465 lbs
Wichard Twisted Shackles
Drop forged 316L stainless steel
Part # Dia ID Breaking Load
WIC 1222 3/16" 1-1/32" x 7/16" 2,645 lbs
WIC 1223 1/4" 1-3/16" x 1/2" 3,530 lbs
WIC 1224 5/16" 1-9/16" x 23/32" 6,615 lbs
WIC 1225 13/32" 2" x 7/8" 11,020 lbs
Wichard Anchor Shackles
Drop forged 316L stainless steel
Part # Dia ID Breaking Load
WIC 1241 5/32" 25/32" x 11/32" 1,765 lbs
WIC 1242 3/16" 29/32" x 7/16" 2,645 lbs
WIC 1243 1/4" 1-1/16" x 1/2" 3,530 lbs
WIC 1244 5/16" 1-15/32" x 23/32" 6,615 lbs
WIC 1245 13/32" 1-13/16" x 25/32" 11,020 lbs
WIC 1246 15/32" 2-1/8" x 15/16" 16,535 lbs
Wichard Self Locking Chain Shackles
Extra strong, drop forged 316L stainless steel
shackles with self-locking feature offering the
assurance of no risk of unscrewing.
Part # Dia ID Breaking Load
WIC 1201 5/32" 17/32" x 11/32" 1,765 lbs
WIC 1202 3/16" 5/8" x 7/16" 2,645 lbs
WIC 1203 1/4" 25/32" x 1/2" 3,525 lbs
WIC 1204 5/16" 1-1/32" x 23/32" 6,615 lbs
WIC 1205 13/32" 1-5/16" x 7/8" 11,020 lbs
WIC 1206 15/32" 1-17/32" x 1" 13,225 lbs
Long Shackles
WIC 1211 5/32" 7/8" x 11/32" 1,765 lbs
WIC 1212 3/16" 1-5/32" x 7/16" 2,645 lbs
WIC 1213 1/4" 1-5/16" x 1/2" 3,525 lbs
WIC 1214 5/16" 1-25/32" x 23/32" 6,615 lbs
WIC 1215 13/32" 3-1/16" x 25/32" 11,020 lbs
Wichard Captive Pin Chain Shackles
Extra strong, drop forged 316L stainless steel
screw pin shackles with a captive pin that cannot
fall out of the body when unscrewed. Self-
locking.
Part # Dia ID Breaking Load
WIC 1401 5/32" 1/2" x 5/16" 1,985 lbs
WIC 1402 3/16" 5/8" x 13/32" 3,310 lbs
WIC 1403 1/4" 25/32" x 15/32" 4,630 lbs
WIC 1404 5/16" 1-1/32" x 5/8" 8,160 lbs
WIC 1405 13/32" 1-5/16" x 25/32" 11,465 lbs
WIC 1406 15/32" 1-17/32" x 15/32" 16,535 lbs
22. 862
RIGGINGHARDWARE
Wichard Allen Head Pin Shackles
Ideal for snag free connections
Drop forged 316L stainless steel
Part # Dia ID Breaking Load
WIC 1303 1/4" 3/4" x 15/32" 3,500 lbs
WIC 1304 5/16" 1-1/32" x 5/8" 5,950 lbs
WIC 1305 13/32" 1-5/16" x 25/32" 9,500 lbs
Wichard "D" Shackle "HR"
Special high resistance construction
Drop forged 17-4 PH stainless steel
Part # ID Breaking Load
WIC 11204 5/16" x 1-1/32" 4,850 lbs
Wichard Wide Shackles
Self locking pin which will not loosen, even
under the most violent vibrations
Drop forged 316L stainless steel
Self locking
Part # Dia ID Breaking Load
WIC 1262 3/16" 1-13/32" x 25/32" 1,765 lbs
WIC 1263 1/4" 1-21/32" x 1" 3,300 lbs
WIC 1264 5/16" 2-1/4" x 1-1/4" 5,950 lbs
WIC 1265 13/32" 2-12/16" x 1-9/16" 8,900 lbs
Wichard Captive Pin Long Shackles
Drop forged 316L stainless steel
Part # Dia ID Breaking Load
WIC 1411 5/32" 1-7/32" x 5/16" 1,985 lbs
WIC 1412 3/16" 1-17/32" x 13/32" 3,310 lbs
WIC 1413 1/4" 1-13/16" x 15/32" 4,630 lbs
WIC 1414 5/16" 2-7/16" x 5/8" 8,160 lbs
WIC 1415 13/32" 3-1/16" x 25/32" 11,465 lbs
Wichard Captive Pin Shackles
Stainless steel captive pin thimble shackle with
molded top
The special shape enables the end to be directly
spliced without adding an additional thimble
Drop forged 316L stainless steel
Part # Dia Max Rope Breaking Load
WIC 1494 5/16" 1/2" 6,650 lbs
WIC 1495 13/32" 5/8" 11,100 lbs
Shackles
Wichard Key Pin Shackles
Extra strong, drop forged 316L stainless steel
shackles
Quick locking with half-turn
Part # Dia ID Breaking Load
WIC 1432 3/16" 1-7/16" x 1/2" 2,645 lbs
WIC 1433 1/4" 1-3/4" x 5/8" 3,745 lbs
WIC 1434 5/16" 2-3/8" x 27/32" 5,510 lbs
Key pin shackle with bar
WIC 81432 3/16" 1-7/16" x 1/2" 2,645 lbs
WIC 81433 1/4" 1-3/4" x 5/8" 3,745 lbs
WIC 81434 5/16" 2-3/8" x 27/32" 5,510 lbs
Type Austenitic Martensitic
Common name 18.12 Mo 17.4 PH
European standard X2CrNiMo17-12-2 X5CrNiCuNb 16-4
Us Aisi standard 316 L 630
Composition Carbon < 0,03 % < 0,07 %
Chromium 18 % 16,5 %
Nickel 12 % 4 %
Molybdenum 3 %
Copper 4 %
Stainless Steel
Wichard uses top-quality grades of stainless steel in its products
which offers good mechanical characteristics. They are non-
magnetic steels and most of Wichard products are manufactured
in this grade. The second (17.4PH) is martensitic steel
(magnetic), which is referred to as high-resistance steel (HR).
23. 863
RIGGINGHARDWARE
Swivels
Cruiser 316 Stainless Steel
Jaw and Eye Swivels
CRU 350021 1/4"
CRU 350016 3/8"
Sea-Dog Galvanized Swivels
Hot dip galvanized drop forged steel
Eye and eye swivel with an extra large eye
Part # Size A B WLL
SED 181106 1/4" 3-7/16" 11/16" 1/2 Ton
SED 181108 5/16" 4-1/4" 15/16" 3/4" Ton
SED 181110 3/8" 5" 1-1/8" 1 Ton
SED 181112 1/2" 6-1/2" 1-7/16" 1-1/2 Ton
SED 181116 5/8" 7-11/16" 1-9/16" 2 Ton
SED 181119 3/4" 8-7/8" 1-7/16" 4-3/4 Ton
Sea-Dog Stainless Steel Eye & Jaw Swivels
Investment cast 316 S/S body with 304 stainless pin
Display packaged
Part # Size A B C D
SED 182206-1 1/4" 2-9/16" 1/2" 7/16" 9/16"
SED 182208-1 5/16" 3-11/16" 5/8" 9/16" 13/16"
SED 182210-1 3/8" 4-5/8" 3/4" 7/8" 15/16"
SED 182212-1 1/2" 6" 1" 1-1/8" 1-3/16"
Sea-Dog Stainless Steel Jaw & Jaw Swivels
Investment cast 316 S/S body with 304 stainless pin
Display packaged
Part # Size A B C
SED 182306-1 1/4" 2-9/16" 1/2" 1/2"
SED 182310-1 3/8" 4-5/8" 3/4" 7/8"
SED 182312-1 1/2" 6" 1" 1-1/16"
Sea-Dog Galvanized Swivels
Hot dip galvanized drop forged steel
Jaw and eye swivel with a monel cotter pin and an extra large eye
Part # Size A B C D WLL
SED 181206 1/4" 3-3/8" 3/4" 7/16" 7/8" 1/2"Ton
SED 181208 5/16" 3-13/16" 7/8" 1/2" 7/8" 3/4" Ton
SED 181210 3/8" 4-9/16" 7/8" 5/8" 1" 1 Ton
SED 181212 1/2" 6" 1-7/16" 3/4" 1-1/4" 1-1/2 Ton
SED 181216 5/8" 7" 1-5/8" 7/8" 1-1/2" 2 Ton
SED 181219 3/4" 8" 1-11/16" 1-1/8" 1-3/4" 4-3/4 Ton
Anchor Swivels pg 978
Transat
Jaw & Jaw Swivels
Forged 316 stainless steel.
Part # Length Pin Dia.
Jaw
Open
Break
Load
TMS S-8281-06 2-1/2” 1/4” 1/2” 2,200 lbs
TMS S-8281-08 3-1/2” 5/16” 5/8” 4,000 lbs
TMS S-8281-10 4-1/2” 3/8” 3/4” 4,600 lbs
TMS S-8281-13 5-3/4” 1/2” 7/8” 9,200 lbs
24. 864
RIGGINGHARDWARE
Sea-Dog Pear Style Quick Links
316 AISI stainless steel
Part # A B C D E Break Load
SED 153603 1/8" 2-1/16" 7/8" 3/8" 3/16" 1,430 lbs
SED 153605 3/16" 2-13/16" 1-1/8" 9/16" 15/16" 2,970 lbs
SED 153610 3/8" 4-13/16" 1-13/16" 13/16" 1/2" 12,000 lbs
SED 153612 1/2" 5-9/16" 2-1/8" 15/16" 9/16" 16,500 lbs
Sea-Dog Stainless Steel Quick Links
316 Stainless steel
Part # A B C D E Break Load
SED 153005-1 3/16" 1-15/16" 9/16" 1/4" 5/16" 4,950 lbs
SED 153006-1 1/4" 2-1/4" 5/8" 5/16" 3/8" 7,150 lbs
SED 153008-1 5/16" 2-13/16" 3/4" 7/16" 1/2" 12,000 lbs
SED 153010-1 3/8" 3-7/16" 7/8" 1/2" 1/2" 19,800 lbs
SED 153012 1/2" 4-7/8" 1" 15/16" 9/16" 24,200 lbs
Sea-Dog Quick Links
Electro-galvanized steel link
Display packaged
Part # A B C D E Break Load
SED 158008-1 5/16" 2-15/16" 11/16" 3/8" 7/16" 7,700 lbs
SED 158010-1 3/8" 3-9/16" 15/16" 1/2" 1/2" 12,100 lbs
SED 158012-1 1/2" 4-3/16" 15/16" 9/16" 9/16" 18,000 lbs
Quick Links
Sea-Dog Light Duty Stainless Steel Quick Link
304 stainless steel
Breaking strength: 9600 lbs
SED 153708
Cruiser 316 Stainless Steel Quick Links
CRU 200019 1/8"
CRU 200017 3/16"
CRU 200014 1/4"
CRU 200016 5/16"
CRU 200015 3/8"
Mibro Plated Quick Links
Electro galvanized connecting links with a threaded gate
Part # Size lD SWL (kg)
MIB 420130 1/8" 3/8" x 1-1/8" 180
MIB 420210 3/16" 7/16" x 1-1/2" 280
MIB 420480 1/4" 9/16" x 1-3/4" 400
MIB 420560 5/16" 11/16" x 2-9/32" 700
MIB 420640 3/8" 3/4" x 2-13/32" 900
MIB 420720 7/16" 13/16" x 2-11/16" 1100
MIB 420800 1/2" 29/32" x 3-5/32" 1500
25. 865
RIGGINGHARDWARE
Snap Hooks
Sea-Dog Mooring Snap Hook
Cast steel nickel plated
Display packaged
SED 155841-1
Sea-Dog Utility Snap
Cast malleable steel nickel plated
Display packaged
SED 155812-1
Sea-Dog Utility Snap
Made from electro-galvanized forged steel
Display packaged
SED 155822-1
Sea-Dog Heavy Duty Utility Snap
Made from electro-galvanized forged steel
Display packaged
SED 155832-1
Mibro Hand Line Snap
Hot dipped galvanized drop forged steel
with stainless steel spring
Ideal for boat trailer winch lines
Length: 5-1/4", Eye: 1-1/8", Throat: 11/16"
Rated 5000 lbs
MIB 3047-G
Sea-Dog Spring Hook
Made from electro-galvanized mild steel
Breaking strength: 1200 lbs
Display packaged
SED 155630-1
Sea-Dog Scissor Hook
Electro-galvanized mild steel
Breaking strength: 1700 lbs
Display packaged
SED 155640-1
Sea-Dog Fast Eye Safety Snap
Die cast manganese bronze
Display packaged
Part # A B C Break Strength
SED 138305-1 4-3/4" 13/16" 1-1/8" 1,500 lbs
Sea-Dog Fast Eye Safety Snap
Cast stainless steel
Display packaged
SED 146300-1
26. 866
RIGGINGHARDWARE
Sea-Dog Fixed Eye Boat Snaps
Investment cast 316 stainless steel
Display packaged
Part # Size A B C
SED 146120-1 0 2-1/16" 1/4" 3/8"
SED 146121-1 1 2-7/8" 7/16" 5/8"
SED 146122-1 2 3-3/16" 1/2" 3/4"
SED 146123-1 3 3-13/16" 11/16" 3/4"
Sea-Dog Swivel Eye Boat Snaps
Investment cast 316 stainless steel
Display packaged
Part # Size A B C
SED 146131-1 1 3-5/16" 7/16" 3/4"
SED 146132-1 2 3-7/8" 1/2" 3/4"
SED 146133-1 3 4-5/8" 1/2" 7/8"
Cruiser 316 Stainless Steel Rigid Eye Snaps
CRU 340063 Size 1, L: 2-3/4" x 5/8" eye
CRU 340064 Size 2, L: 3-1/4" x 11/16" eye
Sea-Dog Swivel Eye Boat Snaps
Sand cast brass
Display packaged
Part # Size A B C
SED 139131-1 1 3-3/16" 3/8" 5/8"
SED 139132-1 2 3-11/16" 1/2" 3/4"
SED 139133-1 3 4-1/2" 9/16" 3/4"
Snap Hooks
Sea-Dog Fixed Eye Boat Snaps
Sand cast brass
Display packaged
Part # Size A B C
SED 139120-1 0 2-1/8" 1/4" 7/16"
SED 139122-1 2 3-3/16" 1/2" 3/4"
Sea-Dog Fixed Eye Boat Snap
Die cast manganese bronze, chromed
Part # Size A B C
SED 136126 0 2-1/8" 1/4" 7/16"
Cruiser Bronze Swivel Eye Boat Snaps
CRU B251-1** Size 1, L: 3-1/4" x 5/8" eye
**Limited Quantities
Cruiser Swivel Eye Boat Snaps
Investment cast 316 stainless steel
Part # Size A B C
CRU 350014 1 2-7/8" 7/16" 5/8"
CRU 350015 2 3-3/16" 1/2" 34"
27. 867
RIGGINGHARDWARE
Snap Hooks
Sea-Dog Trigger Snap
Sand cast brass
Display packaged
SED 139800-1
Sea-Dog Swivel Bolt Snap
Investment cast 316 S/S
Display packaged
Part # A B C D
SED 146590-1 3-9/16" 5/16" 5/16" 3/4"
Sea-Dog Swivel Bolt Snap
Sand cast brass
Display packaged
Part # A B C D
SED 139016-1 3-5/16" 7/16" 3/8" 5/8"
Sea-Dog Spring Snap
Investment cast 316 stainless steel
Display packaged
SED 139896-1
Sea-Dog Swivel Eye Baby Snap
Die cast manganese bronze
SED 131042
Sea-Dog Trigger Snap
Die cast manganese bronze
Display packaged
SED 136800-1
Sea-Dog Swivel Bolt Snaps
Die cast manganese bronze
Display packaged
Part # A B C D
SED 136590-1 3-5/16" 7/16" 1/2" 11/16"
SED 136010-1 2-9/16" 5/16" 5/16" 3/8"
SED 136021-1 3-3/16" 3/8" 3/8" 7/8"
Cruiser Bronze Swivel Eye Bolt Snaps
CRU B225-5/8"** L: 3-1/4" x 5/8" eye
**Limited Quantities
Mibro Bronze Baby Swivel Eye Snap
MIB 334B 3/8"
28. 868
RIGGINGHARDWARE
Sea-Dog Stainless Steel Asymmetrical Snaps
316 Stainless steel, the asymmetrical style provides approximately a
50% increase in breaking strength over traditional style snaps. Display packaged.
Part # A B C D Breaking Strength
SED 150100-1 3/8" 4" 5/8" 11/16" 3,600 lbs
SED 150120-1 7/16" 4-5/8" 13/16" 15/16" 6,600 lbs
Sea-Dog Stainless Steel Snap Hooks w/Eye Insert
316 stainless steel. Display packaged.
Part # A B C D Breaking Strength
SED 151565-1 1/4" 2-3/8" 1/4" 5/16" 7,00 lbs
SED 151585-1 5/16" 3-1/8" 3/8" 3/8" 1,400 lbs
SED 151605-1 3/8" 4" 7/16" 1/2" 2,000 lbs
SED 151625-1 7/16" 4-11/16" 5/8" 5/8" 2,500 lbs
Sea-Dog Mild Steel Snap Hooks
Part # A B C D Breaking Strength
SED 156060-1 1/4" 2-3/8" 5/16" 5/16" 560 lbs
SED 156080-1 5/16" 3-3/16" 7/16" 7/16" 1,140 lbs
SED 156100 3/8" 3-15/16" 9/16" 1/2" 1,600 lbs
SED 156100-1 3/8" 3-15/16" 9/16" 1/2" 1,600 lbs
SED 156120-1 7/16" 4-3/4" 3/4" 5/8" 2,000 lbs
SED 156140 1/2" 5-9/16" 3/4" 3/4" 2,800 lbs
Sea-Dog Stainless Steel Snap Hooks
316 stainless steel. Display packaged.
Part # A B C D Breaking Strength
SED 151560-1 1/4" 2-3/8" 5/16" 5/16" 700 lbs
SED 151580-1 5/16" 3-1/8" 7/16" 3/8" 1,400 lbs
SED 151600-1 3/8" 4" 9/16" 1/2" 2,000 lbs
SED 151620-1 7/16" 4-11/16" 11/16" 5/8" 2,500 lbs
Snap Hooks
Sea-Dog Stainless Steel Locking Asymmetrical Snap Hooks w/Eye Insert
The locking cylinder greatly reduces the accidental opening of the snap. The eye insert reduces
wear on the rope.
Part # A B C D Breaking Strength
SED 150088 5/16" 3-1/8" 3/8" 1/2" 2,300 lbs
SED 150108 3/8" 4" 9/16" 11/16" 3,600 lbs
SED 150128 7/16" 4-3/4" 11/16" 15/16" 6,600 lbs
Sea-Dog Snap Link
316 stainless steel
SED 152100
Sea-Dog Asymmetrical Snap Hook
316 stainless steel
Display packaged
SED 150125-1
29. 869
RIGGINGHARDWARE
Snap Hooks
Wichard Stainless Steel Carbine Hooks
Carbine Hooks with torsion spring closures formed 17-4 PH stainless steel.
Part # Stock Length B Dia Breaking Load Style
WIC 2313 1/4" 2-3/8" 5/16" 1,320 lbs Standard
WIC 2315 5/16" 3-5/32" 11/32" 3,550 lbs Standard
WIC 2316 13/32" 4" 1/2" 5,500 lbs Standard
WIC 2323 1/4" 2-3/8" 5/16" 1,765 lbs Asymmetric
WIC 2325 5/16" 3-5/32" 7/16" 3,750 lbs Asymmetric
WIC 2326 13/32" 4" 1/2" 5,730 lbs Asymmetric
WIC 2327 15/32" 4-5/8" 5/8" 9,925 lbs Asymmetric
WIC 2333 1/4" 2-3/8" 13/32" 1,320 lbs Eyeless
Standard
Asymmetric
Eyeless
Sea-Dog Stainless Steel Spring Gate Hooks
Investment cast 316 stainless steel. Display packaged.
Part # A B C
SED 154250-1 2" 7/16" 1/4"
SED 154270-1 2-3/4" 7/16" 3/8"
SED 154300-1 3-15/16" 15/16" 9/16"
Cruiser 316 Stainless Steel Snaps
CRU 200020 50 mm long
CRU 200018 70 mm long
CRU 200021 100 mm long
Transat
Spring Hooks
Forged 316 stainless steel
Part # Length Gate Eye Break Load
TMS S-8150-050 2” 7/16” 1/4” 400 lbs
TMS S-8150-070 2-3/4” 15/32” 15/32” 1700 lbs
TMS S-8150-100 4” 3/4” 19/32” 3000 lbs
Transat
Spring Hooks
Forged 316 stainless steel
Part # Size Gauge Eye Gate
TMS Q85006 2-3/8” 1/4” 11/32” 19/32”
TMS Q85010 4” 3/8” 19/32” 13/16”
TMS Q85012 4-3/4” 1/2” 11/16” 7/8”
Sea-Dog Stainless Steel Key Lock Snap Hooks
316 stainless steel. Made in Italy. High quality with long gate opening.
Part # A B C D Breaking Strength
SED 151060-1 1/4" 2-3/8" 3/8" 3/8" 660 lbs
SED 151080-1 5/16" 3-1/8" 7/16" 7/16" 1,700 lbs
SED 151100-1 3/8" 4" 9/16" 5/8" 2,600 lbs
SED 151120-1 7/16" 4-3/4" 3/4" 11/16" 4,400 lbs
SED 151160 1/2" 6-5/16" 7/16" 1-1/8" 5,200 lbs
Sea-Dog Stainless Steel Key Lock Snap Hooks w/Eye Insert
316 stainless steel with eye insert. Made in Italy. High quality with long gate opening.
Part # A B C D Breaking Strength
SED 151065 1/4" 2-3/8" 1/4" 3/8" 660 lbs
SED 151085 5/16" 3-1/8" 3/8" 7/16" 1,700 lbs
SED 151105 3/8" 4" 7/16" 9/16" 2,600 lbs
SED 151125 7/16" 4-3/4" 9/16" 11/16" 4,400 lbs
30. 870
RIGGINGHARDWARE
Wichard Large Bail Snap Shackles "HR"
Superior steel product, hot forged from 17-4
PH stainless steel. In the event of extreme
stress, will deform long before breaking. Will
not burst or break suddenly.
Part # Length A B Function
Break
Load
WIC 2373 3-1/8" 5/8" 3/4" 2,645 lbs 4,450 lbs
WIC 2375 4-1/8" 13/16" 1-1/32" 3,525 lbs 8,490 lbs
WIC 2377 5-1/2" 1-1/32" 1-3/8" 8,820 lbs 17,600 lbs
Wichard Swivel Eye Snap Shackles "HR"
Hot drop forged, extra strong 17-4 PH stainless steel
snap shackles with swivel eye.
Part # Length Eye Dia Breaking Load
WIC 2473 2-3/4" 7/16" 4,850 lbs
WIC 2475 3-1/2" 9/16" 8,490 lbs
WIC 2477 4-3/4" 1-3/16" 17,600 lbs
Wichard
Quick Release Snap Shackles "HR"
Use these high quality quick release shackles
for any application where releasing under load
is required. Ideal for spinnaker handling and towing.
Part # Length A B Function
Break
Load
S/S Torsion Snap Shackle
WIC 2673 2-3/4" 9/16" 11/32" 2,425 lbs 3/350 lbs
WIC 2674 3-5/32" 5/8" 15/32" 3,525 lbs 5,100 lbs
WIC 2675 3-17/32" 25/32" 1/2" 4,400 lbs 7,100 lbs
WIC 2676 4-5/16" 1" 5/8" 6,600 lbs 10,500 lbs
S/S Torsion Snap Shackle with Large Bail
WIC 2773 3-1/4" 1/2" 3/4" 2,425 lbs 3,350 lbs
WIC 2774 3-1/2" 5/8" 29/32" 3,525 lbs 5,100 lbs
WIC 2775 4-5/16" 3/4" 1-1/32" 4,400 lbs 7,100 lbs
Wichard Double Action Safety Snaps
The double action feature of this safety
snap is easily operated with one hand.
Yet absolutely will not open unless this
deliberate action is taken. The eye will
accommodate either rope or webbing.
Part # Length
SWL
lbs
Breaking
Load Colour
WIC 2454 4-7/32" 3300 6,150 lbs Yellow
WIC 2455 4-7/32" 3300 6,150 lbs Blue
Sea-Dog Toggle Snap Shackle
Investment cast 316 stainless steel
SED 142902
Snap Shackles
Wichard Snap Hooks
Hot drop forged standard snap hooks with torsion
spring closure. 316L stainless steel.
Part # Length Eye Dia Breaking Load
WIC 2480 2" 11/32" 660 lbs
WIC 2481 3" 15/32" 1,550 lbs
WIC 2482 4" 5/8" 3,300 lbs
Wichard
Snap Shackles w/Clevis Pins "HR"
Same as 2300 series, except with clevis pin
Part # L A B C Dia D
Break
Load
WIC 2474 2-3/4" 5/8" 15/32" 19/32" 1/4" 3750 lbs
WIC 2476 3-7/8" 13/16" 11/16" 15/32" 9/32" 8550 lbs
Wichard Fixed Eye Snap Shackles
Hot drop forged, extra strong 316L stainless steel
Part # Length A B Break Load
WIC 2470 1-3/8" 5/16" 1/4" 880 lbs
WIC 2471 2" 5/8" 13/32" 4,450 lbs
A
B
Harken Snap Shackles
The 111, 112 and 1584 snap
and make them removable. Many
use a snap shackle on the lower
vang block so that it can be moved
from the mastbase to the toerail to
use it as a preventer.
Part # Pin A Work Load Break Load
HAR 111 3/16" 2-9/16" 660 lbs 2,000 lbs
HAR 112 1/4" 3--3/8" 1,550 lbs 3,000 lbs
HAR 1584 5/16" 3-1/16" 3,300 lbs 3,600 lbs
111/112 1584
31. 871
RIGGINGHARDWARE
Snap Shackles / Hooks / Bow Eyes
Pilkington Tow Hooks
Drop-forged, tempered alloy hooks
No. refers to shank diameter
Part # Eye WL Opening
WES 1" 7/8" 6,000 lbs 2-1/4"
WES 1-1/8" 1" 8,500 lbs 2-1/2"
WES 1-1/4" 1-1/8" 11,000 lbs 2-3/4"
Sea-Dog Main Sail Hook
Formed 304 stainless steel
Display packaged
Part # A B C Fastener
SED 195410-1 5/16" 3-3/4" 1/4" 1/4" RH
Sea-Dog Lashing Hooks
Formed 304 stainless steel
Display packaged
Part # A B C
SED 195210-1 5/16" 2-3/4" 1/4"
SED 195220-1 3/8" 3-1/2" 1/4"
Sea-Dog Cunningham Hooks
Formed 304 stainless steel
Display packaged
Part # A B C
SED 195110-1 1/4" 2-9/16" 7/16"
SED 195120-1 5/16" 3-11/16" 5/8"
304 stainless steel
Display packaged
Part # A B C
SED 195310-1 5/16" 2-1/2" 1/2"
SED 195320-1 3/8" 3-1/2" 1/2"
Wichard Water-Tight U-Bolts
High quality stainless steel U-bolt with water-
tight rubber collar means no leaks, no noise
and no vibration. Eliminates the need for messy
silicone sealers in most applications.
Part # Stock Length ID Colour
WIC 65321 3/16" 2-3/8" 13/16" Black
WIC 65331 1/4" 2-3/4" 15/16" Black
WIC 65332 1/4" 2-3/4" 15/16" White
WIC 65441 5/16" 3-15/16" 1" Black
Sea-Dog Twin Shank Bow Eye
U-Bolt surrounds cast eye for added strength. Die-cast zinc chrome
plated. 1-5/8" stud spacing.
SED 079233-1
Perko Bow Eye
Chrome plated zinc eye with zinc plated
steel U-bolt, nuts, and washers.
Safe working load 2000 lbs
Size: shank 5/16" x 3", 1" ID eye
PER 1235-DP-CHR
Sea-Dog Clevis Grab Hooks
Cast 316 stainless steel
Part # Chain A B C D E
SED 146706 1/4" 3-1/8" 7/16" 1/2" 3/8" 5/16"
SED 146708 5/16" 3-3/4" 1/2" 9/16" 7/16" 7/16"
SED 146710 3/8" 4-1/4" 9/16" 5/8" 1/2" 1/2"
Transat
Swivel Snap Shackles
Forged 316 stainless steel
Part # Size Length Break Load
TMS S-8291-12 1/2” 2-3/4” 3,000 lbs
TMS S-8291-16 5/8” 3-1/2” 6,000 lbs
TMS S-8291-22 7/8” 5” 8,300 lbs
32. 872
RIGGINGHARDWARE
Sea-Dog Bow Eyes
Machined AISI 304 S/S.
Part # Thread A B C D E
SED 080031 3/8 -
NC 3/8" 1-1/2" 1-1/16" 2-7/8" 1-7/16"
SED 080031-1 3/8 -
NC 3/8" 1-1/2" 1-1/16" 2-7/8" 1-7/16"
SED 080033-1 3/8-NC 3/8" 2-1/2" 1-1/16" 3-15/16" 1-7/16"
SED 080035-1 3/8 -
NC 3/8" 3-1/2" 1-1/16" 4-15/16" 1-7/16"
SED 080055 1/2-NC 7/16" 3-1/2" 1-3/8" 5-5/16" 1-7/8"
SED 080055-1 1/2-NC 7/16" 3-1/2" 1-3/8" 5-5/16" 1-7/8"
SED 080085-1 1/2-NC 1/2" 3-7/16" 1-3/8" 5-5/16" 1-7/8"
SED 080095 5/8-NC 5/8" 5-1/2" 1-5/16" 8" 1-15/16"
Sea-Dog Stainless Steel U-Bolts
Crimped ears. Metric thread. 1" diameter eye.
Part # A B C D E
SED 080253-1 5 mm 1-3/8" 1 2-5/8" 1-3/16"
SED 080265-1 6 mm 1-7/8" 1-1/16" 3-3/16" 1-5/16"
SED 080285-1 8 mm 2" 1" 3-5/16" 1-5/16"
SED 080288-1 8 mm 3-1/8" 1" 4-1/2" 1-5/16"
Sea-Dog Stern Eyes
Part # Thread A B C D E
SED 080135-1 3/8- NC 3/8" 3-1/2" 1-1/16" 4-15/16" 1-7/16"
SED 080155-1 1/2-NC 7/16" 3-1/2" 1-3/8" 5-5/16" 1-7/8"
SED 080187-1 1/2 -
NC 1/2" 4-3/4" 1-3/8" 6-5/8" 1-7/8"
Sea-Dog Bow Eyes
Die cast chrome plated zinc head. Nut and washer included.
Part # A B C D E
SED 079133-1 3/8-N/C 3-1/6" 15/16" 5-1/8" 1-13/16"
SED 079135-1 3/8-N/C 4-5/8" 15/16" 6-5/8" 1-13/16"
Bow Eyes / U-Bolts
All Blue Wave 'U' bolts have metric threads
Blue Wave U-Bolts
Highly polished AISI 316 stainless steel construction.
Part # G L1 L2 L3 L4 B D Break
BLU 340435 5/32" 2-19/32" 1-3/8" 1" 1-3/16" 1" 11/64" 1,600 lbs
BLU 340535 13/64” 2-21/32” 1-3/8” 1” 1-3/16” 1” 11/64” 1,950 lbs
BLU 340635 15/64” 2-21/32” 1-3/8” 1” 1-3/16” 1-1/16” 13/64” 2,700 lbs
BLU 340650 15/64” 3-5/16” 1-31/32” 1” 1-3/16” 1-1/16” 13/64” 2,700 lbs
BLU 340835 5/16” 2-13/16” 1-3/8” 1” 1-3/16” 1” 9/32” 3,800 lbs
BLU 340850 5/16” 3-3/8” 1-31/32” 1” 1-3/16” 1” 9/32” 3,800 lbs
BLU 341045 25/64” 2-23/32” 1-25/32” 1-9/16” 1-9/16” 1-3/16” 25/64” 7,700 lbs
33. 873
RIGGINGHARDWARE
Bow Eyes
Wichard Stainless Steel Eye Bolts
Made of drop forged 316L stainless steel. Metric thread.
Part #
Shank
Dia. x Length
Eye
Dia
Breaking
Load
WIC 6490 1/4" x 1-9/16" 15/32" 2000 lbs
WIC 6491 1/4" x 2-3/8" 15/32" 2000 lbs
WIC 6492 5/16" x 3-5/32" 9/16" 3300 lbs
WIC 6493 5/16" x 4" 9/16" 3300 lbs
WIC 6495 13/32" x 4" 5/8" 6000 lbs
WIC 6497 15/32" x 4-3/4" 11/16" 7750 lbs
Sea-Dog Stainless Steel Eye Bolts
Part # A B C D E
SED 080463-1 6mm 2-3/16" 1/2" 1-1/8" 1"
SED 080466-1 6mm 3-3/8" 1/2" 2-5/16" 1"
SED 080483-1 8mm 2-9/16" 9/16" 1-5/16" 1"
SED 080488-1 8mm 45/16" 5/8" 3" 1"
SED 080495-1 10mm 3-3/8" 5/8" 1-15/16" 1-3/16"
SED 080499-1 10mm 5-3/8" 5/8" 3-15/16" 1-3/16"
SED 080504-1 12mm 5-1/2" 3/4" 3-15/16" 1-3/16"
SED 080506-1 12mm 7-7/8" 3/4" 6-5/16" 1-3/16"
Crosby Screw Eye Bolts
Forged Steel — Quenched and Tempered
Hot Dip galvanized
Part # (A x C) D
CRO G275 1/4X2 .50"
CRO G275 5/16X21/4 .63"
CRO G275 3/8X21/2 .75"
CRO G275 1/2X31/4 1.0"
CRO G275 5/8X4 1.25"
Crosby Shoulder Nut Eye Bolts
Forged Steel - Quenched and Tempered
Fatigue rated at 1-1/2 times the Working Load
Limit at 20,000 cycles
Hot Dip galvanized after threading (UNC)
Comes with Hot Dip galvanized hex nuts
Part # (A x C)
Working
Load lbs D
CRO G277 5/16X41/4* 1200 .62"
CRO G277 3/8X21/2* 1550 .75"
CRO G277 3/8X41/2* 1550 .75"
CRO G277 1/2X31/4* 2600 1.00"
CRO G277 1/2X6* 2600 1.00"
CRO G277 5/8X4* 5200 1.25"
CRO G277 5/8X6* 5200 1.25"
CRO G277 3/4X41/2* 7200 1.50"
CRO G277 3/4X6* 7200 1.50"
* Request Items
Crosby Regular Nut Eye Bolts
Forged Steel - Quenched and Tempered
Fatigue rated at 1-1/2 times the
Working Load Limit at 20,000 cycles
Hot Dip galvanized after threading (UNC)
Comes with Hot Dip galvanized hex nuts
Recommended for in-line pull
Part # (A x C)
Working
Load lbs D
CRO G291 3/8X6 1,550 .75"
CRO G291 1/2X8* 2,600 1.0"
CRO G291 1/2X10* 2,600 1.0"
CRO G291 5/8X8* 5,200 1.25"
CRO G291 5/8X10* 5,200 1.25"
CRO G291 5/8X12* 5,200 1.25"
CRO G291 3/4X8* 7,200 1.25"
CRO G291 3/4X10* 7,200 1.50"
CRO G291 3/4X12* 7,200 1.50"
CRO G291 3/4X15* 7,200 1.50"
CRO G291 1X12* 13,300 2.0"
* Request Items
Sea-Dog Galvanized Nut Eye Bolts
Forged steel. Hot dipped galvanized.
Part # A B C D E
SED 080812 1/4" 2" 1/2" 3-1/16" 9/16"
SED 080814 1/4" 3-15/16" 1/2" 4-15/16" 9/16"
SED 080822 5/16" 2-5/16" 9/16" 3-9/16" 5/8"
SED 080824 5/16" 4-1/4" 9/16" 3-15/16" 5/8"
SED 080832 3/8" 2-7/16" 11/16" 3-15/16" 11/16"
SED 080834 3/8" 4-1/4" 11/16" 6-1/16" 11/16"
SED 080843 1/2" 3-1/4" 15/16" 5-1/8" 1"
SED 080846 1/2" 5-7/8" 15/16" 7-13/16" 1"
SED 080854 5/8" 4-1/8" 1-1/4" 6-9/16" 1-1/4"
SED 080856 5/8" 6" 1-1/4" 8-5/16" 1-1/4"
SED 080864 3/4" 4-3/8" 1-7/16" 7-3/8" 1-1/2"
SED 080866 3/4" 6-1/16" 1-7/16" 9" 1-1/2"
34. 874
RIGGINGHARDWARE
Part # G L1 L2 B D Thread Break
BLU 370630 15/64" 2-1/4" 1-3/16" 1" 1/2" 1-3/16" 2,800 lbs
BLU 370660 15/64” 3-7/16” 2-3/8” 1” 1/2” 2-3/8” 2,800 lbs
BLU 370835 5/16" 2-19/32" 1-3/8" 1" 19/32" 1-3/8" 5,250 lbs
BLU 370880 5/16” 4-11/32” 3-5/32” 1” 19/32” 2-15/16” 5,250 lbs
BLU 371050 25/64” 3-11/32” 1-31/32” 1-3/16” 5/8” 1-31/32” 7,700 lbs
BLU 371000 25/64” 5-5/16” 3-15/16” 1-3/16” 5/8” 3-23/32” 7,700 lbs
BLU 371210 15/32” 5-1/2” 1-15/16” 1-3/16” 45/64” 3-11/32” 9,900 lbs
BLU 371216 15/32” 7-7/8” 6-5/16” 1-3/16” 45/64” 3-11/32” 9,900 lbs
Blue Wave Welded Eye Bolts
Highly polished AISI 316 stainless steel construction
All Blue Wave eye bolts have metric threads
Sea-Dog Stainless Steel Eye Nuts
316 stainless steel. NC threads
Part # A B C D E
SED 078106 1/4" 7/16" 1-1/4" 5/8" 3/16"
SED 078106-1 1/4" 7/16" 1-1/4" 5/8" 3/16"
SED 078108 5/16" 9/16" 1-1/2" 13/16" 1/4"
SED 078108-1 5/16" 9/16" 1-1/2" 13/16" 1/4"
SED 078110 3/8" 5/8" 1-7/8" 1" 5/16"
SED 078110-1 3/8" 5/8" 1-7/8" 1" 5/16"
SED 078112 1/2" 7/8" 2-3/8" 1-3/16" 3/8"
SED 078112-1 1/2" 7/8" 2-3/8" 1-3/16" 3/8"
-1 Denotes display packaged
Crosby Eye Nuts
Forged steel, quenched and tempered threaded
eye nuts
Hot dip galvanized
Part # Bolt Eye Size SWL
CRO G400-#1* 1/4" .75" x .66" 520 lbs
CRO G400-#2 3/8" 1" x .75" 1,250 lbs
CRO G400-#3A 1/2" 1-1/4" x 1" 2,250 lbs
CRO G400-#4 5/8" 1.5" x 1.19" 3,600 lbs
CRO G400-#5 3/4" 1.75" x 1.38" 5,200 lbs
* Request Item
Sea-Dog Stainless Steel Rings
304 stainless steel
Part #
Stock
Dia
Inside
Dia
SED 191207 1/8" 3/4"
SED 191307 3/16" 3/4"
SED 191310 3/16" 1"
SED 191312 3/16" 1-3/16"
SED 191410 1/4" 1"
SED 191412 1/4" 1-1/4"
SED 191415 1/4" 1-1/2"
SED 191512 5/16" 1-1/4"
SED 191515 5/16" 1-1/2"
SED 191517 5/16" 1-3/4"
SED 191520 5/16" 2"
SED 191625 3/8" 2-1/2"
SED 191632 3/8" 3-1/4"
Sea-Dog Galvanized Rings
Galvanized steel
Part #
Stock
Diameter
Inside
Diameter
SED 192415 1/4" 1-1/2"
SED 192420 1/4" 2"
SED 192520 5/16" 2"
SED 192625 3/8" 2-1/2"
SED 192630 3/8" 3"
SED 192830 1/2" 3"
SED 192840 1/2" 4"
SED 192940 5/8" 4"
Eye Bolts / Rings
Sea-Dog Bronze Ring
Die cast manganese bronze
Inside diameter: 3/16"
Outside diameter: 1-1/16"
SED 192027
35. 875
RIGGINGHARDWARE
Rings / Eye Straps
Wichard Webbing Eye Strap
5/32" diameter 316L stainless steel with a perfect
Use #8 fasteners
WIC 9211
Sea-Dog Tie Down Eye Straps
Chrome plated forged bronze wire
Use #10 FH fasteners
Display packaged
Part # A B C
SED 081251-1 3/8" 1-1/16" 2-1/8"
SED 081251 Bulk as above
SED 081252-1 3/8" 2" 3-1/8"
Sea-Dog Tie Down Eye Strap
Forged 304 stainless
Use #10 FH fasteners
Part # A B C
SED 081261 3/8" 1-1/16" 2-1/8"
Sea-Dog Plastic Pad Eyes
Injection molded nylon pad eye
SED 081310-1 Black (5/pkg)
SED 081311-1 White (5/pkg)
Sea-Dog Polished Cast Pad Eye
2/pkg, use #8 FH screws
SED 081280-1
Sea-Dog Stainless Steel D-Rings
304 stainless steel, 1/4" stock diameter
SED 191840 1-1/2"
SED 191841 2"
Transat Stainless Pad Eye
316 stainless steel
TMS Q32101 9.5mm
Gloma Eye Straps
Forged 316 stainless steel
Part # Inside Width Inside Height Hole Size
GLO 702 3/8” 1/2” 3/16”
GLO 703 1/2” 9/16” 1/4”
GLO 704 5/8” 3/4” 5/16”
Transat Stainless
Stainless Steel D-Ring
304 stainless steel, 3/16" stock diameter
TMS S-469-0525 1"
Sea-Dog Pad Eye
Die cast zinc chrome plated
Use #8 FH fasteners
SED 081242-1 5/pkg
Wichard Eye Straps
High strength forged stainless steel
Part # Length Inside Height
Max
Load
WIC 9201 1-3/16" 5/16" 7/16" 880
WIC 9202 1-7/8" 13/32" 1/2" 1,760
WIC 9203 2-1/8" 15/32" 5/8" 2,425
WIC 9204 2-3/8" 5/8" 13/16" 6,170
Sea-Dog Pad Eyes
Forged AISI 304 stainless steel. 2/pkg
Part # A B C Fastener
SED 081200-1 5/16" 3/8" 1-3/8" #8 FH
SED 081205-1 3/8" 1/2" 1-5/8" #10 FH
36. 876
RIGGINGHARDWARE
Harken Eye Straps
316 stainless steel
Part # A B C D E F Fastener
Breaking
Strength
HAR 073 1-11/16” 1/2” 1-1/4” 7/16” 3/8” 7/16” #10 1600 lbs
HAR 074 3-1/4” 3/4” 1-1/2” 5/8” 5/8” 9/16” 1/4” 4000 lbs
HAR 201 1-7/8" 3/8" 1-1/2" 9/16" 1/4" 7/16" #10 1600 lbs
HAR 419 2-1/2" 3/4" 2" 3/4" 5/8" 1/2" #10 1600 lbs
HAR 445 1-1/2" 3/8" 1-1/16" 7/16" 3/8" 7/16" #8 1000 lbs
074 073/201/445
Part # D A1 A2 L
BLU 150401 5/32” 1-5/16” 7/16” 15/32”
BLU 155102 13/64” 1-11/32” 19/32” 9/16”
BLU 155203 7/32” 1-23/32” 13/16” 3/4”
BLU 155304 7/32” 2-15/32” 1-3/32” 1-3/32”
BLU 156205 1/4” 2-21/32” 1-1/4” 1-9/32”
Blue Wave Eye Straps
High polished AISI 316 stainless steel construction
Eye Straps / Pad Eyes
Harken Forged Eye Straps
316 stainless steel
Eyestraps are useful accessories, performing duty as lashdown points, fairleads and light duty
mounting bases for blocks. Harken forged eyestraps are extremely strong, and their rounded
shape will not chafe line.
Part # A B C D E F Fastener
Breaking
Strength
HAR 2133 1-3/16” 3/4” 1-1/2” 3/8” 9/16” 3/8” #10 2500#
Sea-Dog Pad Eyes
Forged bronze wire polished or chromed
Use #10 fasteners
Part # A B C Finish
SED 081270 5/16" 3/8" 1-3/8" Bronze
SED 081270-1 2 Per card
SED 081271 3/8" 1/2" 1-9/16" Bronze
SED 081275 5/16" 3/8" 1-3/8" Chrome
SED 081275-1 2 Per card
SED 081276 3/8" 1/2" 1-9/16" Chrome
Sea-Dog Pad Eyes
Stamped stainless steel pad eye
Part # A B C Fastener Pkg
SED 081101-1 7/16" 7/16" 1-1/8" #8 4
SED 081102-1 1/2" 9/16" 1-3/8 #10 4
SED 081103 3/4" 3/4" 1-3/4" #10 1
SED 081103-1 3/4" 3/4" 1-3/4" #10 2
Fairleads pg 879 & 895
37. 877
RIGGINGHARDWARE
Pad Eyes
Transat Stainless 2-Hole Pad Eyes
304 stainless steel
Part # Loop Gauge Base
TMS S-8030-05 3/16” 1-25/32” x 14/32”
TMS S-8030-06 1/4” 2-11/32” x 25/32”
TMS S-8030-08 5/16” 3-1/8” x 1”
Transat Stainless 4-Hole Pad Eyes
304 stainless steel
Part # Loop Gauge Base
TMS S-8020-05 3/16” 1-11/32” x 1-3/16”
TMS S-8020-06 1/4” 1-19/32” x 1-11/32”
TMS S-8020-08 5/16” 1-31/32” x 1-17/32”
Transat Stainless Pad Eyes Oblong Base
304 stainless steel
Part # A B C D E Fastener
TMS Q69211 3" 1/2" 7/16" 2-1/4" 3/4" 1/4" FH
TMS Q69212 3-1/2" 7/16" 7/8" 2-7/16" 1-1/4" 5/16" FH
TMS Q69213 4" 3/4" 15/16" 3" 1-3/8" 5/16" FH
Transat Stainless Diamond Pad Eyes
304 stainless steel
Part # A B C D E F Fas
TMS Q69214 3-1/8" 7/16" 3/4" 2-3/8" 1-1/4" 2" 1/4" FH
TMS Q69215 3-1/2" 1/2" 7/8" 2-5/8" 1-3/8" 2-3/16" 1/4" FH
TMS Q69216 3-15/16" 5/8" 1" 3-1/16" 1-9/16 2-3/8" 1/4" FH
Sea-Dog Oblong Eye Plates
Investment cast 316 stainless steel
Part # A B C D E Fastener
SED 088721 3" 1/2" 5/8" 2-1/16" 7/8" 1/4" FH
SED 088722 3-1/2" 5/8" 13/16" 2-9/16 1-3/16" 5/16" FH
SED 088723 4" 3/4" 7/8" 2-15/16" 1-3/8" 5/16" FH
Sea-Dog Oblong Eye Plates
Stamped 304 stainless steel
Part # A B C D E Fastener
SED 089701 2-1/8" 1/2" 5/8" 1-1/2" 5/8" #10 RH
SED 089701-1 2-1/8" 1/2" 5/8" 1-1/2" 5/8" #10 RH
SED 089702-1 2-9/16" 5/8" 3/4" 1-13/16" 3/4" #12 RH
SED 089703-1 3-3/16" 13/16" 7/8" 2-3/16" 15/16" 1/4" RH
SED 089704-1 3-15/16" 7/8" 7/8" 2-7/8" 1-1/4" 5/16" RH
38. 878
RIGGINGHARDWARE
Sea-Dog Eye Plates w/Ring
Stamped 304 stainless
Part # A B C D E F Fas
SED 089612 2-1/2" 2" 1-1/16" 1-5/16" 1/4" 1-9/16" #8 FH
SED 089613 3-3/16" 2-9/16" 1-5/16" 1-3/4" 5/16" 1-5/16" #10 FH
Sea-Dog Pad Eyes
Stamped 304 stainless steel
Part # A B C D E F Fas
SED 089601-1 2-5/16" 1/2" 9/16" 1-13/16" 15/16" 1-7/16" #8 FH
SED 089602-1 2-1/2" 5/8" 3/4" 2" 1-1/16" 1-9/16" #8 FH
SED 089603-1 3-3/16" 7/8" 7/8" 2-9/16" 1-5/16" 1-15/16" #10 FH
Wichard Folding Pad Eyes
High strength forged 316L stainless steel
These pad eyes fold down compactly when not in use
Part # Dimensions Ring Stock Dia Eye Dia Breaking Load
WIC 6504 1-3/4" x 1-3/4" 1/4" 9/16" 6,000 lbs
WIC 6505 2-5/16" x 2-5/16" 15/16" 3/4" 10,000 lbs
WIC 6506 2-15/16" x 2-15/16" 13/32" 15/16" 20,000 lbs
Pad Eyes
Wichard Toe Rail Pad Eyes
Toe rail pad eyes are designed to protect toe rails by spreading the load and reducing nicks
and dents. Can be fastened securely to the toe rail. Unscrewing the unit part way allows it
Number Rail
Rail Dia.
Min-Max
Rail Wall
Min-Max Dia.
Function
lbs.
Break
Load lbs.
WIC 16614 Asymmetric 3/8" - 1/2" 5/64" - 3/16" 9/16" 2650 6650
WIC 16615 Standard 15/16" - 19/32" 5/32" - 1/4" 23/32" 3300 8400
Sea-Dog Diamond Pad Eyes
Investment cast 316 stainless steel
Part # A B C D E F Fas
SED 088621 3-1/8" 7/16" 3/4" 2-3/8" 1-1/4" 2" 1/4" FH
SED 088622 3-1/2" 1/2" 7/8" 2-5/8" 1-3/8" 2-3/16" 1/4" FH
SED 088623 3-15/16" 5/8" 1" 3-1/16" 1-9/16 2-3/8" 1/4" FH
Harken Pad Eyes
blocks, and hundreds of other items. The diamond shaped padeyes are 316 stainless and are often
used at mast bases where the diamond shape allows them to be mounted very close together.
Part # A B C D E F G Max SWL Max Breaking
HAR 688 3-1/8" 2" 2-3/8" 1-1/4" 1-3/16" 9/16" 7/8" 5,000 lbs 10,000 lbs
HAR 689 3-7/8" 2-5/16" 2-7/8" 1-3/8" 1-9/16" 7/8" 1-1/16" 8,000 lbs 17,200 lbs
39. 879
RIGGINGHARDWARE
Sea-Dog Pad Eyes
304 stainless steel folding pad eyes
Part # A B C D Fastener
SED 090125-1 1-3/32" 1/2" 1/8" 7/16" #8 RH
SED 090145-1 2" 1-1/4" 1/4" 1" 1/4" RH
SED 090155-1 2-5/8" 1-1/2" 5/16" 1-3/16" 1/4" RH
Sea-Dog Folding D-Rings
4-hole fastener
316 stainless steel base/17-4PH D-ring
Part # A B C D Fastener
SED 048610-1 2-1/8" 1-3/16" 1/4" 7/8" 1/4" RH
SED 048615-1 2-9/16" 1-3/4" 1/4" 1" 3/8" RH
Sea-Dog Weldable Bow Eyes
Cast aluminum
Part # Style A B C D
SED 079710 Single 1-13/16" 13/16" 3-3/8" 9/16"
SED 079720 Double 1-13/16" 13/16" 3-15/16" 9/16"
Sea-Dog Folding D-Rings
4-hole fastener
316 stainless steel base/17-4PH D-ring
Part # A B C D F
SED 048620-1 1-3/16" 1-3/8" 1/4" 1" 1-1/4"
SED 048625-1 1-9/16" 1-15/16" 3/8" 1-1/2" 1-7/8"
Sea-Dog Nylon Fairlead
Injection molded nylon with a stainless steel
insert
SED 082615
Sea-Dog Nylon Fairleads
Injection molded nylon
Part # A B C D Fastener
SED 082010 3/8" 3/4" 7/8" 7/16" #8 RH
SED 082051 9/16" 1-1/8" 1" 11/16" #10 RH
Sea-Dog Rail Mount Fairlead
Injection molded nylon and stainless steel
Allows easy routing of roller furling lines
Stainless insert in fairlead
Fits 7/8" - 1" tubing. 11/16" dia. eye
SED 327112-1
Johnson Marine
Roller Furling Fairlead
Phenolic bull's-eye
Mounts on stanchions from 7/8" to 1"
Allows control line to be located either inside
or outside of stanchions
JHD 40-501
Harken Bullseye Fairlead
line such as when routing a spinnaker pole
foreguy aft along the cabin house.
1-1/4" x 1-1/2"
Use #10 RH fasteners
HAR 237
Guides pg 895
Pad Eyes / Fairleads
40. 880
RIGGINGHARDWARE
Sailing Hardware
Nalco Heavy Cast Blocks
Heavy cast construction
Galvanized.
Self aligning shackle
Ball bearing
Line guard.
Protected pressure grease nipple
Part # Capacity Pulley Rope Type
LOG 37HCBL03 4590 lbs 3" 5/16" Sealed
LOG 37HCBL04 8000 lbs 4" 1/2" Pressure
LOG 37HCBL05 12500 lbs 5" 9/16" Pressure
LOG 37HCBL06 17900 lbs 6" 3/4" Pressure
Sea-Dog Sail Furling Ties
Constructed of natural rubber with a polyethylene cover
Easy-to-secure knobs will not damage sails
3/pkg
Diameter: 5/32"
SED 625812 12"
SED 625816 16"
SED 625820 20"
SED 625824 24"
Davis Tiller-Tamer
The tension is smoothly adjustable
from fully locked to fully free
Tiller-Tamer gives improved control
and feel to the tiller handle
It's equally adaptable to outboard or
inboard rudder tillers
Does not interfere with automatic steering systems
Ends need for lashing of the tiller when boat is moored, in a
slip, or on the trailer
DIN 2205
Davis Sail Track Stops
Large knurled wheels are
released with ease
Made of heavy-duty, black
anodized aluminum and nickel
plated brass
Flat stops come with lanyard holes
DIN 2350 Round .50" Dia. x .875"
DIN 2351 Flat .42" x 1" x .125"
DIN 2352 Flat .75" x 1" x .125"
2350 23522351
Harken Sail Chafe Protector
Designed to ease genoas over lifelines or
shrouds
Fits wire sizes 3/16" to 7/16"
They are made up of two interlocking halves
swaged wire, and can be removed
HAR 285 Pair
Forespar Exit Box
Use this exit on all trip lines and topping lifts. It is suitable for
metal contact to promote corrosion. The axles are stainless steel
molded into a strong Marelon cheek with no
moving parts.
Maximum line size: 1/4”
Flange size: 3-1/4” L x 7/8” W
Cut-out size: 2” x 11/16”
FRS 030016
Sea-Dog Exit Plates
Exit plates are used to guide halyard from out of a mast or spar or
from below deck and allow exterior adjustment of the halyard.
Part # A B C D Line Size Style
SED 081011 1-1/4" 3-1/4" 3/4" 2-3/4" up to 1/2" straight
SED 081012 2" 4-5/8" 1-1/2" 3-5/8" up to 3/4" straight
SED 081013 2" 4-5/8" 1-1/2" 3-5/8" up to 3/4" curved
Sea-Dog Pulley
Stainless steel with a plastic sheave
Height: 1-13/16"
SED 092100-1
SSI Universal Mast Boot
Fit a number of sizes of masts with deck
collars of the same basic shape
Molded in steps so top and bottom can be cut
Boot may be installed on stepped masts
Secure top and bottom of boot with stainless steel hose clamps
(not included)
Masts to 17-1/2”, collar to 31”
SSI 91000000
Davis Cable Covers
Made with ultra-violet absorbent plastic, are tough, durable and
last longer
Split for quick, snap-on installation
Sold in 6' lengths
DIN 251 3/32"
DIN 252 1/8"
DIN 253 5/32"
DIN 254 3/16"
DIN 255 1/4"
DIN 256 5/16"
DIN 257 3/8"
41. 881
RIGGINGHARDWARE
Mast Booting / Sailing Tapes
Davis Turnbuckle Boots
Prevent sails and sheets from catching on
turnbuckles with these attractive white plastic
turnbuckle boots with caps.
Part #
Turnbuckle
Size
Overall Boot
Size
Spare Cap
No.
DIN 241 up to 1/16" 3/4" ID x 13" DIN 245
DIN 242 3/8" 1-1/8" ID x 17" DIN 246
DIN 243 1/2" 1-1/2" ID x 20" DIN 247
DIN 244 5/8" 1-3/4" ID x 24" DIN 248
Taylor Made Rubber Spreader Boots
Fits quickly and easily over the stay and spreader end
Constructed from soft yet tough white synthetic rubber
Protects the rigging connections
Reduces drag
Molded in split form
Sold in pairs
Part # Description Measurements Size
TAY 960025 Small 4-5/8" x 2" 1/2" 1/2" to 1-1/2"
TAY 960026 Medium 5-3/4" x 2 3/8" 1" to 2"
TAY 960027 Large 7-1/2" x 2 7/8" 2" to 3"
Life Safe Boat Cover/Bimini Bandage Tape
Excellent resistance to tearing in any direction
Very aggressive adhesive
Works on damp covers
Transparent colour suitable on any cover
LIF RE1136 8-3/4" x 10'
LIF RE3868 3" x 15'
Life Safe Sail Patch Tape
Excellent resistance to tearing in any direction
Very aggressive adhesive
Works on damp sails
Transparent colour suitable on any sail type
LIF RE3843 3" x 15'
Life Safe Boot Tape
Does not require un-stepping the mast
It bonds itself into a solid piece of rubber
offering protection against moisture
It conforms to irregular surfaces and leaves no
sticky residue
LIF RE3940 4” x 40”, White
LIF RE3941 4” x 100”, White
Included:
Pre-measured Spartite cans
Modelling clay
Foam support strips
Pouring cup
Stirring sticks
Plastic gloves
Petroleum jelly
Spartite Mast Booting
The Spartite ring shrinks less than one thousandth of an inch and
when installed properly will radically reduce or eliminate leaking
at the partners. Spartite ensures secure and correct mast position in
the partners all season and makes correct placement of the mast in
the partners automatic whenever the mast is re-stepped. This is an
exceptional feature for racers who trailer to regattas, sailors who
remove their spars annually, and boats with unique rig placements.
Spartite is a pre-measured two part polymer poured into the cavity
between the mast and the partners while the mast is in the boat.
Each kit comes with complete instructions and materials for the
yard or yacht owner to build a simple mold out of even the most
complex partners or mast collar. Spartite makes a one piece perfect
Spartite 2000 is available in two kit sizes:
Kit I - Small covers up to 51 cubic inches and is
recommended for sailboats to 40'.
Kit II - Large covers up to 102 cubic inches and is
recommended for sailboats over 40'.
SPA 2000-KIT1 Small
SPA 2000-KIT2 Large
Life Safe Rigging Tape
providing extraordinary safety for sails, lines
and rope ends.
1" x 15'
LIF RE3866 Black
LIF RE3867 White
Rescue Tape pg 430
Life Safe Sail Repair Tape
Emergency use on sails
Provides on the spot repairs
Adheres instantly on contact
Conforms to the shape of the sail
LIF RE1140 2" x 15', White
42. 882
RIGGINGHARDWARE
Battens / Tiller Extensions
Forespar Tiller Extensions
extension features the
removable Speed Lock (SL)
fully universal composite
rugged 5/8" diameter black
anodized aluminum tubing with
rubber golf grip handle. It is designed
for smaller boats (up to 22' maximum) and is available in three
lengths. The Speed Lock (SL) ends are fully universal and have
been proven very strong and reliable. The composite universal
swivel slides into a base that is permanently mounted to the tiller.
To remove, simply push down on the “Speed-Lock” button and
slide the extension off the base. The Speed Lock universal is
threaded into the end of the tiller extension handle allowing for
easy replacement should it be necessary.
FRS 102004 24"
FRS 102005 30"
FRS 102006 36"
Forespar Nash Labels
These popular label sets are great for any racer or cruiser.
Add safety and organization to your above and below deck
systems. Remember, not everyone on board knows your boat
as well as you do. These high quality
labels are self-adhesive, vinyl plastic,
waterproof and won’t fade. Perfect for
FRS 100014 201 Cleat & winch
FRS 100016 202 Control lines
FRS 100010 203 Track numbers
FRS 100013 206 Spar
FRS 100017
Plastream Sail Battens
Made of tough composite plastic, these
battens are unbreakable.
PSB 102 5/8" x 12"
PSB 106 5/8" x 24"
PSB 108 5/8" x 30"
PSB 109 5/8" x 36"
PSB 116 1" x 24"
PSB 118 1" x 30"
PSB 119 1" x 36"
PSB 120 1" x 40"
PSB 126 1-3/8" x 24"
PSB 128 1-3/8" x 30"
PSB 129 1-3/8" x 36"
PSB 130 1-3/8" x 40"
Display contains a wall mountable rack
and the battens listed below.
Batten Size Pieces
5/8” x 12” 6
5/8” x 24” 4
5/8” x 30” 2
5/8” x 36” 2
1” x 24” 4
1” x 30” 4
1” x 36” 4
1” x 40” 2
1-3/8” x 24” 2
1-3/8” x 30” 4
1-3/8” x 36” 4
1-3/8” x 40” 3
PSB 135 Batten display
Forespar Tiller Lock Box
This inexpensive product turns any of
Forespar’s ball-grip style telescoping
tiller extensions into an effective and
adjustable tiller lock. Installed into the
cockpit coaming, your tiller extension can be used to lock your
helm in place while at anchor or if you are single handed and need
to jump free of the helm for a short time to clear a sheet or secure
a line. Not intended to be a self-steering device but a helm lock.
Cutout: W: 3-3/8" x H: 4-3/4" x D: 1-1/2"
FRS 100000
Harken Aluminum Tiller Extensions
The rigid anodized body of this tiller extension transmits subtle
boat and rudder movements, allowing you to steer by the feel of
the helm. The simple and lightweight design has no unnecessary
frills—every aspect contributes to its strength, stiffness, or comfort.
The universal joint and nonslip foam grip are UV-protected and
Part # L Tube Weight oz Fastener
HAR 7100.24* 24 5/8" 4.1 3/16"
HAR 7100.30* 30 5/8" 4.9 3/16"
HAR 7100.33* 33 5/8" 5.2 3/16"
HAR 7100.36* 36 5/8" 5.6 3/16"
HAR 7100.42* 42 5/8" 6.3 3/16"
HAR 7100.48* 48 5/8" 7.1 3/16"
HAR 7102* Replacement universal joint
*Request Items
7102
43. 883
RIGGINGHARDWARE
Tiller Extensions
Forespar Fixed Twist Lock Tiller Extensions
The “Sta-Fast” style patented
to hold the tiller extension up-
just where you left it- without
falling down below the level of
the tiller. No more falling down
feature is adjustable on the permanently mounted “Sta-Fast”
end. The “Sta-Fast” style end is very strong and also features a
double plate mount that keeps the thru-bolt from turning inside
your tiller. The plates mount top and bottom on the tiller and also
serve as a chafe-guard for the top of the tiller. Permanent mount
only. Incorporates a 5/16" thru bolt which will accommodate tiller
thickness up to 1-1/2".
FRS 108100 SF-S 19" to 32"
FRS 108101 SF-M 27" to 48"
Parts:
FRS 104004 Assembly
FRS 104006 Receptacle
Forespar Twist Lock Tiller Extensions
The “TFP” style tiller extension is constructed of white powder
coated anodized aluminum with a rubber ball style comfortable
tiller extensions are designed to work in either direction, this design
has the advantage that if you forget which way you “locked” the
unit, you can “unlock” it without forcing it to jam. Racers and
cruisers use this rugged twist-lock telescoping detachable extension
on boats in the mid to high 30’s. Because they are detachable, they
need not be stored on the tiller. The all stainless steel “TFP” quick
release end allows for full horizontal and vertical movement of the
tiller extension and it can be removed with the simple push of a
FRS 104016 TFP-S 19" to 32"
FRS 104017 TFP-M 27" to 48"
104004
Spinlock
EJB Tiller Extensions
Strong, lightweight anodised aluminium tube
UV Resistant, extra tough
Swivels freely through the full 360 degrees
horizontal for fast, reactive helming
Triple-wave handle gives a choice of secure grip positions
Responsive ‘feel’ and precise helm control
Less wrist and grip fatigue
Black
SPI EJB/600B 24"
SPI EJB/900B 35-1/2"
Replacement Parts:
SPI EJB-CLIP Clip for extension
SPI EJB-JOINT
SPI EJB-KIT Extension service kit
Spinlock Tiller Extensions
The asymmetric extension improves helming performance, with
more feedback for accurate and precise control, maintaining the
best helming position for optimum trim and visibility. The two
handed helming mode lets the arms relax into a more comfortable,
elbows down position, resulting in less fatigue and increased
concentration. The Parallel grip EJ has the same features of the
Asymmetric, but with a smaller grip. The compact solution for the
smaller cockpit and ideal for fast hiking and tacking.
Push-button adjustment
Torlon ball locking mechanism
Stainless steel swivel joint for precise universal movement
Fast pin for easy stowage
Integrated shock absorber
Asymmetrical
29-5/8” - 47-1/4”
SPI EA/1200C* Citrus
SPI EA/1200S Silver
23-5/8” - 35-7/16”
SPI EA/900A* Amber
SPI EA/900C* Citrus
SPI EA/900S Silver
Parallel
23-5/8” - 35-7/16”
SPI EJ900S Silver
SPI EJ900G Graphite
Replacement Parts:
SPI ECLIP* Tiller clip
* Request Items
44. 884
RIGGINGHARDWARE
Whisker Poles
Forespar Whisker Pole Sizing Chart
Boat Length
Working Jib
Light to Mod. Air Mod. To Heavy Air
Genoa
Light to Mod. Air Mod to Heavy Air
Up to 16’ ADJ 4’-8’ ADJ 6’-12’ ADJ 6’-12’ HD 6’-12’
Up to 22’ ADJ 6’-12’ HD 6’-12’ HD 6’-12’ LC 8’-14’
Up to 25’ HD 6’-12’ HD 6’-12’ ADJ 7’-17’ or LC 8’-14’ ADJ 7’-17’ or LB/LC 8’-14’
Up to 28’ LC 8’-14’ LC 8’-14’ LC 8’-14’ LC 10’-18’
Up to 33’ LC 10’-18’ LC 10’-18’ LC 10’-18’ LC12’-22’
Up to 35’ LC 12’-22’ LC 12’-22’ LC 12’-22’ LC 13’-24’
Up to 46’ LC 13’-24’ LC 13’-24’ LC 13’-24’ LC 15’-27’
Up to 55’ LC 15’-27 LC 15’-27 LC 15’-27’ Custom
Forespar Heavy Duty Telescoping Whisker Poles
These telescoping whisker poles are heavy duty two section and three section aluminum spars which can be extended to
lengths up to 15' and securely locked in position by an internal twist lock device. Poles feature self-latching Ultra Series
FRS 406300 HD 6-12-DL Two sections extending from 79" to 138", 1-7/8" outer tube diameter.
FRS 407101 ADJ 7-15-DL Three sections extending from 83" to 165", 2 in. outer tube diameter.
Parts:
FRS 400009 Lock repair kit HD6-12
FRS 400010 Lock repair kit ADJ7-15
Forespar Line Control Whisker Poles
Line Control is a proven concept in telescoping whisker pole
design and available only on Forespar Whisker Poles. Line
Control poles are heavy duty two section aluminum spars which
can be extended by simply un-cleating the line at the inboard
end, extending or retracting the pole to the desired length and re-
cleating the line. This adjustment process is quick and easy, even with the largest pole, and
is executed with the operator positioned safely at the mast.
Part # Model
End Fittings
Recommended Mast
Fittings
Collapsed
Length
Max
Working
Length
Tubing
DiametersInboard Outboard
FRS 401106* LC 10-18 EL-UXP EL UXP PE-3SC, RC-125, FC-125 121.75" 218.13" 2" & 2-1/2"
FRS 402201 LC 12-22 UTS-UTR UTS UTR T-125, AT-125 148.50" 265.25" 2-1/2" & 3"
FRS 403202* LC 13-24 UTS-UTR UTS UTR T-125-S 162.00" 272.00" 3" & 3-1/2"
*Request Item
Forespar Offshore GP & UGPS Series End Fittings
309030
FRS 304021 UGPS-300-EF Ultra 3.0"
FRS 309030 GP-300-EF Aluminum 3.0"
FRS 309033 GP-350-EF Aluminum 3.5"
FRS 304080 TS-300 Ultra 3.0"
FRS 309028* TS-300 Aluminum 3.0"
FRS 309031 TS-350 Aluminum 3.5"
*Request Item
Forespar Auto Socket End Fittings TS Style
309028
Forespar Ultra Series End Fittings
FRS 304060 UTR-200-EF Ultra 2.0"
FRS 304061 UTR-250-EF Ultra 2.5"
FRS 304062 UTR-300-EF Ultra 3.0"
UTR Trigger Style Ends
304060
FRS 304054 UXP-150-EF Ultra 1.5"
FRS 304050 UXP-200-EF Ultra 2.0"
FRS 304051 UXP-250-EF Ultra 2.5"
FRS 304052 UXP-300-EF Ultra 3.0"
FRS 304053 UXP-350-EF Ultra 3.5"
UXP External Trip Ends
304054