Anzeige
Claas dominator 78 (type 091) combine service repair manual
Claas dominator 78 (type 091) combine service repair manual
Claas dominator 78 (type 091) combine service repair manual
Claas dominator 78 (type 091) combine service repair manual
Anzeige
Claas dominator 78 (type 091) combine service repair manual
Claas dominator 78 (type 091) combine service repair manual
Claas dominator 78 (type 091) combine service repair manual
Claas dominator 78 (type 091) combine service repair manual
Claas dominator 78 (type 091) combine service repair manual
Anzeige
Claas dominator 78 (type 091) combine service repair manual
Claas dominator 78 (type 091) combine service repair manual
Claas dominator 78 (type 091) combine service repair manual
Claas dominator 78 (type 091) combine service repair manual
Claas dominator 78 (type 091) combine service repair manual
Anzeige
Claas dominator 78 (type 091) combine service repair manual
Claas dominator 78 (type 091) combine service repair manual
Claas dominator 78 (type 091) combine service repair manual
Claas dominator 78 (type 091) combine service repair manual
Claas dominator 78 (type 091) combine service repair manual
Anzeige
Claas dominator 78 (type 091) combine service repair manual
Claas dominator 78 (type 091) combine service repair manual
Claas dominator 78 (type 091) combine service repair manual
Claas dominator 78 (type 091) combine service repair manual
Claas dominator 78 (type 091) combine service repair manual
Anzeige
Claas dominator 78 (type 091) combine service repair manual
Nächste SlideShare
Hyster E008 (H650F) Forklift Service Repair ManualHyster E008 (H650F) Forklift Service Repair Manual
Wird geladen in ... 3
1 von 25
Anzeige

Más contenido relacionado

Más de jfjkskekfmsme(20)

Anzeige

Claas dominator 78 (type 091) combine service repair manual

  1. r(j REPAIR MANUAL CLUB- DOMINAIBB108-58
  2. GROUP INDEX 1 Specifications 2 Sectional View of Machine 3 Drive Schematic 4 Cutterbar 5 Threshing Mechanism 6 Elevators and Crop Delivery 7 Engine and Drives 8 Transmission and Chassis 9 Hydraulic System 10 Steering and Rear Axle 11 Electrical System 12 Auxiliary Equipment Special Notes
  3. 1 Specificalills
  4. DO 106 .... 56 1 SPECIFICATIONS DOMINATOR 106 Technical data 1. 1 Weights 1. 4 Dimensions 1. 5 Settings and capacities 1. 7 DOMINATOR 96 Technical data 1. 9 Weights 1.12 Dimensions 1.13 Settings and capacities 1.15 DOMINATOR 86 Technical data 1.17 Weights 1.20 Dimensions 1.21 Settings and capacities 1.23 DOMINATOR 76 Technical data 1.25 Weights 1.28 Dimensions 1.29 Settings and capacities 1.31 DOMINATOR 66 Technical data 1.33 Weights 1.36 Dimensions 1.37 Settings and capacities 1.39 DOMINATOR 56 Technical data 1.41 Weights 1.44 Dimensions 1.45 Settings and capacities 1.47
  5. SPECIFICATIONS DOMINATOR 106 Technical data, dimensions and weights are given as an indication only. CLAAS reserve the right to make changes in design and specifications at any time without previous notice and rejects all responsibility in case of errors. NOTE: Front, rear, right and left refer to direction of travel. Cutterbar Cutting widths Height adjustment Cutting height range Clearance height under cutterbar skid Reel drive Reel height adjustment Feeder house Cutterbar clutch Threshing Equipment Stone trap Concave Disawning Threshing drum Threshing mechanism clutch DO 106 . .,. ,.56 To be sure, always compare settings and filling' capacities with specifications stated in the appropriate Operator's Manual for the machine concerned. 3.90 m 4.50 m 5.10 m 5.70 m 6.60 m 7.50 m (13ft) (15ft) t17ft) (19ft) (22ft) (25ft) hydraulic from 360 mm (14 1/4 in) below ground level to 1300 mm (51 1/4 in) above ground level. with floatation springs in use 950 mm (37 112 in) with floatation springs blocked 1100 mm (43 1/2 in) belt-operated variable speed drive hydraulic chain-type feed rake hydraulic standard equipment adjustable from operator's platform rear of concave separately adjustable (2nd lever) width 1580 mm (621/4 in), 12 bars disawning plates underneath the concave, two and three disawning plates can be engaged separately width 1580 mm (62 1/4 in) diameter 450 mm (17 3/4 in) six rasp bars, seven drum discs speed infinitely variable from 650 to 1500 1/min (rpm) Optional: a) step pulley drive - 750, 1000, 1200, 1500 1Imin (rpm) b) slow-speed threshing drum drive kit (chain drive) from 290 to 680 1/min (rpm) hydraulic 1.1
  6. 00 106 .... 56 SPECIFICATIONS DOMINATOR 106 Straw Walkers Type No. of walker racks No. of walker crankshafts Speed of walker crankshafts No. of tine crankshafts No. of tines per crankshaft Walker area Separating area Cleaning Type Wind volume control Total cleaning area Grain tank Capacity Unloading tube Engines Cubic capacity Max. speed l/min (rpm) Idle speed 1/min (rpm) kW (DIN H.P.) Cooling Fuel tank capacity Battery 1.2 step type walkers and intensive separation system (crankshaft with tines) six two 220_5 1/min (rpm) two six 7.00 m2 (10 850 sq in) 7.95m2 (12322sqin) forced air cleaning fan by infinitely variable fan speed additional fan shutters (optional) 5.10 m2 (7905 sq in) 6500 litres (178.75 U.K. bushels; 184.6 U.S. bushels) hydraulically operated position control Mercedes DM 401.901 10455 cm3 (638 in3 ) 2390 1150 151 (205) water 300 litres (66 Imp. gal, 79 U.S. gaU 12 Volt, 143 Ah
  7. 00 106 .... 56 SPECIFICATIONS DOMINATOR 106 Ground drive Transmission Ground speeds in kilometers per hour Forward travel Reverse travel Ground speeds in miles per hour Forward travel Reverse travel Traction Wheel Drive Steering hydrostatic, controlled by lever on operator's platform three gear ranges in either forward or reverse 1. and 2. gear range for field operations 3. gear range for road travel on 23.1-26 R1 / 18.4-34 R1 tyres 1. from 0 to 6.1 km/h (from 0 to 7.7 km/h) 2. from 0 to 8.9 km/h (from 0 to 11.1 km/h) 3. from 0 to 20.0 km/h (from 0 to 25.5 km/h) 1. from 0 to 4.6 km/h (from 0 to 5.8 km/h) 2. from 0 to 6.6 km/h (from 0 to 8.8 km/h) 3. from 0 to 15.3 km/h (from 0 to 19.0 km/h) on 23.1-26 R1 / 18.4-34 R1 tyres 1. from 0 to 3.8 mph (from 0 to 4.8 mph) 2. from 0 to 5.5 mph (from 0 to 6.9 mph) 3. from 0 to 12.4 mph (from 0 to 15.8 mph) 1. from 0 to 2.9 mph (from 0 to 3.6 mph) 2. from 0 to 4.1 mph (from 0 to 5.5 mph) 3. from 0 to 9.5 mph (from 0 to 11.8 mph) Figures in brackets are only applicable for certain countries. In countries with a speed limit of 20 km/h (12.4 mph) for self-propelled machinery of husbandry, the hydrostatic drive system incorporates a device that limits the ground speed accordingly. via final drive gears in oil bath hydrostatic Brakes Tyres and Tyre Pressures Foot brake Hand brake hydraulic, designed to work independently when the pedal lock is removed mechanical, independent of foot brakes maximum minimum tyre pressure tyre size tyre maize picker head grain cutterbar pressure six-row five-row 7.50 m 6.60 m 5.70 m 5.10 m 4.50m 3.90m four-row (25 ft) (22 ft) (19 ft) (17 ft) (15 ft) (13 ft) bar (psi) bar (psi) bar (psi) bar (psi) bar (psi) bar (psi) 18.4-3414PR 3.3 (48) - 3.2 (46) 3.2 (46) 3.0 (43) 2.8 (41) 23.1-26 14 PR 2.5 (36) 2.5 (36) 2.3 (33) 2.3 (33) 2.1 (30) 1.9 (27) 28.1-26 12 PR 1.8 (26) 1.8 (26) 1.7 (25) 1.7 (25) 1.6 (23) 1.5 (22) 30.5-32 12 PR 1.5 (22) 1.2 (17) 1.1 (16) 1.1 (16) 1.1 (16) 1.1 (16) 14.5/75-20 8 PR - 3.0 (43) 3.0 (43) 3.0 (43) 3.0 (43) 3.0 (43) Where ground conditions allow maximum tyre pressure, the maximum tyre pressure should be maintained in order to obtain the longest possible service life of the tyre. Torque Settings of Wheel Bolts and Wheel Nuts Front wheels wheel nuts with thrust piece H 22 DIN 74361-10 =860 Nm (622 ft Ib) Rear wheels wheel bolts M 18 x 1.5 =325 Nm (235 ft Ib) 1.3
  8. DO 106 .... 56 SPECIFICATIONS DOMINATOR 106 Weights Combine equipped with 18.4-34 Rl and 14.5/75-20 tyres, empty fuel tank and six cylinder engine: Determine the total weight of the machine by adding the weight of the equipment used on the combine to the weight of the basic machine. Basic machine (without cutterbar) With cutterbar and spring tine reel 3.90 m (13 ft) 4.50 m (15 ft) 5.10 m (17 ft) 5.70 m (19 ft) With bat-type reel 6.60 m (22 ft) 7.50 m (25 ft) Two cpl. divider assemblies With straw chopper With four-row maize picker head With five-row maize picker head With six-row maize picker head With maize head stalk chopper With wheel weights (one set) With liquid ballast (magnesium chloride solution) filled into tyres With extra weights in compliance with road regulations (not for all countries) Combine Dimensions 9060 kg (19974 Ib) add 960 kg ( 2116 Ib) add 1040 kg ( 2292 Ib) add 1120 kg ( 2469 Ib) add 1200 kg ( 2446 Ib) add 1320 kg ( 2910 Ib) add 1440 kg ( 3175 Ib) add 50 kg ( 110 Ib) add 284 kg ( 626 Ib) add 1260 kg ( 2778 Ib) add 1510 kg ( 3329 Ib) add 1740 kg ( 3836 Ib) add 250 kg ( 551 Ib) add 104 kg ( 2291b) add 254 kg ( 560 Ib) add 300 kg ( 661 Ib) Turning Diameter, conforming to DIN 70020 Specifications Wheel Thread Width over Tyres Wheel Base Ground Clearance front rear on 18.4-34 tyres on 23.1-26 14 PR tyres and DW 20-26 wheels on 28.1-26 tyres adjustable axle on 18.4-34 tyres on 23.1-26 14 PR tyres and DW 20-26 wheels on 28.1-26 tyres 2510 mm (98 3/4 in) 2550 mm (100 1/2 in) 2780 mm (109 1/2 in) 2300 mm (90 1/2 in) 2980 mm (117 1/4 in) 3140 mm (123 1/2 in) 3500 mm (137 3/4 in) 3650 mm (143 3/4 in) 420 mm (16 1/2 in) 16800 mm (661 1/2 in) 1.4
  9. 00 106 .... 56 SPECIFICATIONS DOMINATOR 106 ~-----------L------------.....& Operatjng Position 3760 mm (148 in) add 415 mm ( 16 3/8 in) 3720 mm (146 1/2 in) WIDTH B HEIGHT H Cutting width 3.90 m 4.50 m 5.10 m 5.70 m 6.60 m 7.50"m (13 ft) (15ft) (17ft) (19 ft) (22ft) ("25ft) Overall width 5565 mm 6175 mm 6785 mm 7395 mm 8310 mm 9225 mm (219 in) (243 in) (267 1/4) (291 1/4) (327 1/4) (363 1/4 in) Overall widths are with deflectors set out on each side by 600 mm (23 3/4 in). With four-row (3 m) maize picker head 3260 mm (128 1/4 in) With five-row maize picker head 4060 mm (159 3/4 in) With six-row maize picker head 5200 mm (204 3/4 in) To top of grain tank When grain tank lid is open To top of cab To bottom edge of grain tank unloading tube 4020 mm (158 1/4 in) On 23.1-26 or 28.1-26 tyres the height dimensions are being reduced by approx. 40 mm (1 1/2 in). LENGTH L Without dividers With hoop dividers With long dividers With short dividers Witz maize picker head , With straw hood back panel adjusted to rearward position With straw spreader 9190 mm (361 3/4 in) 9550 mm (376 in) 10540 mm (415 in) 10290 mm (405 in) 10220 mm (402 1/4"in) add 300 mm ( 11 3/4 in) add 500 mm ( 19 3/4 in) 1.5
  10. 00 106 .... 56 SPECIFICATIONS DOMINATOR 106 .......-----------L--------------.. Transport Position WIDTH B HEIGHT H Cutting width 3.90 m 4.50 m 5.10 m 5.70 m 6.60 m 7.50 m (13ft) (15ft) (17ft) (19 ft) (22ft) (25ft) Overall width 4365 mm 4975 mm 5585 mm 6195 mm 7110 mm 8025 mm (171 3/4) (1953/4) (220 in) (244 in) (280 in) (315 in) With cutterb6r detached 3000 mm (118 in) With four-row (3 m) maize picker head 3000 mm (118 in) With five-row maize pic.ker head 3800 mm (149 1/2 in) With six-row maize picker head 4940 mm (194 1/2 in) Ta top of grain tank 3760 mm (148 in) Ta top of cab 3720 mm (146 1/2 in) On 23.1-26 or 28.1-26 tyres the height dimensions are being reduced by approx. 40 mm (1 1/2 in). LENGTH L 1.6 With cutterbar detached Without dividers With hoop dividers With long dividers With short dividers With maize picker head 7770 mm (306 in) 9290 mm (365 3/4 in) 9650 mm (380 in) 10640 mm (419 in) 10390 mm (409 in) 10320 mm (406 in)
  11. SPECIFICATIONS DOMINATOR 106 SETTINGS AND CAPACITIES Hydraulic Oil Pressures Lift hydraulic system pressure relief valve Hydrostatic steering system pressure relief valve Hydrostatic ground drive: (LINDE hydrostatic pump BPV 100 S) Charge pressure Operating pressure (SAUER hydrostatic pump SPV 23) Charge pressure Operating pressure Oil Capacities Transmission gearbox Final drive gearboxes Lift hydraulic system LINDE hydrostatic ground drive system SAUER hydrostatic ground drive system Engines Slip clutches Reel Main table auger Upper feed rake shaft Returns elevator 180 bar (2610 psi) 90+5 bar (1305+72.5 psi) 16 bar ( 232 psi) 420 bar (6091 psi) 14 bar ( 203 psi) 420 bar (6091 psi) 5 litres (4.4 Imp. qt; 5.28 U.S. qt) SAE 90 (M IL-L-21 05 B) API-G L-5-90 Hypoid Transmission Oil 4 litres each (3.5 Imp. qt; 4.2 U.S. qt) SAE 90 (M IL-L-21 05 B) API-G L-5-90 Hypoid Transmission Oil approx.7 litres (6.2 Imp.qt; 7.4 U.S. qt) Hydraulic Oil, H-LP Oils conforming to (DI N 51524) ISO-VG 68 Specifications approx. 8 litres (7 Imp. qt; 8.5 U.S. qt) Hydraulic Oil, H-LP Oils conforming to (DIN 51524) ISO-VG 68 Specifications approx. 27 litres (23.76 Imp. qt; 28.5 U.S. qt) Hydraulic Oil, H-LP Oils conforming to (DI N 51524) ISO-VG 68 Specifications consult engine instruction book and combine operator's manual 200 Nm (145 ft Ib) 200 Nm (145 ft Ib) 220 Nm (159 ft Ib) adjust ratchet clutch so that no play exists DO 106 .... 56 1.7
  12. DO 106 .... 56 SPECIFICATIONS DOMINATOR 106 Shear Bolt Grain tank unloading system Knife Register Reel Basic setting Main table auger Basic setting Concave Control (initial) setting M 10 x 45 DIN 931-8.8 the center of the knife sections should line up with the center of the cutterbar fingers at each end of the knife stroke reel drive shaft placed vertically over the knife. The tines should be adjusted to vertical position. approx. 15 mm (19/32 in) clearance between auger flights and bottom of cutterbar concave entrance: 13 mm (1/2 in) clearance measured at third concave bar concave exit: concave main adjusting lever: concave rear adjusting lever: 3 mm (1/8 in) clearance measured at third last concave bar locked in 3rd hole of quadrant locked in 1st hole of quadrant (e = narrow) Brakes Steering 1.8 Foot brake Hand brake brake must grip when the pedal is depressed through one third of its total travel brake should be effective with the..hand-l-e·locked in the first three to four teeth in the segment with the steering cylinder piston rod fully extended, the adjustable stop bolts must be contacting the steering arms
  13. DO 106 .... 56 SPECIFICATIONS DOMINATOR 96 Technical data, dimensions and weights are given as an indication only. CLAAS reserve the right to make changes in design and specifications at any time without previous notice and rejects all responsibility in case of errors. NOTE: Front, rear, right and left refer to direction of travel. To be sure, always compare settings and filling capacities with specifications stated in the appropriate Operator's Manual for the machine concerned. 5.70 m (19 ft) 5.10 m (17 ft) 4.50 m (15 ft) 3-.90 m (13 ft) 3.60 m (12 ft) hydraulic from 360 mm (14 114 in) below ground level to 1300 mm (51 114 in) above ground level with floatation springs in use 925 mm (36 112 in) with floatation springs blocked 1075 mm (42 114 in) belt-operated variable speed drive hydraulic chain-type feed rake belt-operated Height adjustment Cutting height range Clearance height under cutterbar skid Reel drive Reel height adjustment Feeder house Cutterbar clutch Cutterbar Cutting widths Threshing Equipment Stone trap Concave Disawning Threshing drum standard equipment adjustable from operator's platform rear of concave separately adjustable (2nd lever) width 1320 mm (52 in), 12 bar disawning plates underneath the concave, two and three disawning plates can be engaged separately width 1320 mm (52 in) diameter 450 mm (17 3/4 in) six rasp bars, six drum discs speed infinitely variable from 650 to 1500 1Imin (rpm) Threshing mechanism clutch Optional: a) step pulley drive 800, 1000, 1200, 1500 1Imin (rpm) a1) additional speed 650 1/min (rpm) b) slow speed threshing drum drive kit, 3-speed chain drive: 300, 430 and 550 1/min (rpm) belt-operated 1.9
  14. 00 106 .... 56 SPECIFICATIONS DOMINATOR 96 Straw Walkers Type No. of walker racks No. of walker crankshafts Speed of walker crankshafts No. of tine crankshafts No. of tines per crankshaft Walker area Separating area Cleaning Type Wind volume control Total cleaning area Grain tank Capacity Unloading tube Engine Cubic capacity Max. speed 1Imin (rpm) Idle speed 1Imin (rpm) kW (DIN H.P.) Cooling Fuel tank capacity Battery Ground Drive a) Mechanical Clutch Transmission Speed range 1.10 step type walkers and intensive separation system (crankshaft with tines) five two 220_5 1/min (rpm) two five 5.80 m2 (8990 sq in) 6.60 m2 (10230 sq in) forced air cleaning fan by infinitely variable fan speed additional fan shutters (optional) 4.25 m2 (6588 sq in) 5200 litres (143 Imp. bushels, 147.7 U.S. bushels) hydraulically operated position control Mercedes OM 352 A 5675 cm3 (346 in3 ) 2600 1150 110 (150) water 300 litres (66 Imp. gal, 79 U.S. gal) 12 Volt, 110 Ah variable ground speed, hydraulically controlled dry single disc clutch three forward, one reverse gear on 23.1-26 R 1 tyres 1. Gear 1.6 to 4.0 km/h (0.9 to 2.5 mph) 2. Gear 3.5 to 8.6 km/h (2.4 to 5.3 mph) 3. Gear 8.0 to 19.7 km/h (5.0 to 12.2 mph) R.-Gear 2.8 to 6.9 km/h (1.7 to 4.3 mph)
  15. DO 106 .... 56 SPECIFICATIONS DOMINATOR 96 b) Hydrostatic Transmission Ground speeds in kilometers per hour Forward travel Reverse travel Ground speeds in miles per hour Forward travel Reverse travel Traction Wheel Drive Steering controlled by lever on operator's platform three gear ranges in either forward or reverse 1. and 2. gear range for field operation 3. gear range for road travel on 23.1-26 R1 tyres 1. from 0 to 5.4 km/h (from 0 to· 6.8 km/h) 2. from 0 to 9.9 km/h (from 0 to 12.6 km/h) 3. from 0 to 19.9 km/h (from 0 to 25.3 km/h) 1. from 0 to 4.0 km/h (from 0 to 4.9 km/h) 2. from 0 to 7.4 km/h (from 0 to 8.9 km/h) 3. from 0 to 15.0 km/h (from 0 to 18.0 km/h) on 23.1-26 R1 1. from 0 to 3.4 mph (from 0 to 4.2 mph) 2. from 0 to 6.2 mph (from 0 to 7.8 mph) 3. from 0 to 12.4 mph (from 0 to 15.7 mph) 1. from 0 to 2.5 mph (from 0 to 3.0 mph) 2. from 0 to 4.6 mph (from 0 to 5.5 mph) 3. from 0 to 11.2 mph (from 0 to 11.2 mph) Figures in brackets are only applicable for certain countries. In countries with a speed limit of 20 km/h (12.4 mph) for self-propelled machinery of husbandry, the hydrostatic drive system incorporates a device that limits the ground speed accordingly. via final drive gears in oil bath hydrostatic Brakes Tyres and Tyre Pressures Foot brakes Hand brake hydraulic, designed to work independently when the pedal lock is removed mechanical, independent of foot brake maximum minimum tyre pressure tyre maize picker head grain cutterbar tyre sizes pressure six-row five-row 5.70 m 5.10 m 4.50m 3.90m 3.60 m four-row (19 ft) (17 ft) (15 ft) (13 ft) (12 ft) and up bar (psi) bar (psi) bar (psi) bar (psi) bar (psi) bar (psi) 18.4-34 14 PR 3.3 (48) 3.1 (45) 3.0 (43) 3.0 (43) 2.8 (41) 2.6 (38) 23.1-2612PR 2.1 (30) 2.1 (30) 2.0 (29) 2.0 (29) 1.9 (27) 1.7 (25) 23.1-26 14 PR 2.5 (36) 2.1 (30) 2.0 (29) 2.0 (29) 1.9 (27) 1.7 (25) 28.1-26 12 PR 1.8 (26) 1.6 (23) 1.6 (23) 1.6 (23) 1.5 (22) 1.4 (20) 30.5-3210PR 1.5 (22) 1.1 (16) 1.1 (16) 1.1 (16) 1.1 (16) 1.1 (16) 12.5/80-18 6 PR - 2.7 (39) 2.7 (39) 2.7 (39) 2.7 (39) 2.7 (39) 12.5/80-18 10 PR - 3.0 (43) 3.0 (43) 3.0 (43) 3.0 (43) 3.0 (43) 14.5/75-20 8 PR - 2.4 (35) 2.4 (35) 2.4 (35) 2.4 (35) 2.4 (35) Where ground conditions allow maximum tyre pressure, the maximum tyre pressure should be maintained in order to obtain the longest possible service life of the tyre. Torque Settings of Wheel Nuts and Wheel Bolts Front wheels wheel nuts with thrust piece H 22 DIN 74361-10 = 520 Nm (376 ft Ib) Rear wheels wheel bolts M 18 x 1.5 =325 Nm (235 ft Ib) 1.11
  16. DO 106 .... 56 'SPECIFICATIONS DOMINATOR 96 Weights Combine equipped with 23.1-26 R1 and 12.5/80-18 15 tyres, empty fuel tank and six cylinder engine: Determine the total weight of the machine·by adding the weight of the equipment used on the combine to the weight of the basic machine. Basic machine (without cutterbar) With cutterbar and spring tine reel 3.60 m (12 ft) 3.90 m (13 ft) 4.50 m (15 ft) 5.10 m (17 ft) 5.70 m (19 ft) Two cpl. divider assemblies With straw chopper With cab and ventilating system With four-row maize picker head With five-row maize picker head With six-row maize picker head With maize head stalk chopper With wheel weights (one set) With liquid ballast (magnesium chloride solution) filled into tyres With extra weights in compliance with road regulations (not for all countries) Combine Dimensions 7432 kg (16385 Ib) add 920 kg ( 20281b) add 960 kg ( 2116 Ib) add 1040 kg ( 22931b) add 1120 kg ( 2469 Ib) add 1200 kg ( 2646 Ib) add 50 kg ( 11 0 Ib) add 264 kg ( 582 Ib) add 260 kg ( 573 Ib) add 1260 kg ( 2778 Ib) add 1510 kg ( 3329 Ib) add 1740 kg ( 3836 Ib) add 250 kg ( 551 Ib) add 104 kg ( 229 Ib) add 210 kg ( 4631b) add 300 kg ( 661 Ib) Turning Diameter, conforming to DIN 70020 Specifications Wheel Tread Width over Tyres Wheel Base Ground Clearance front rear on 23.1-26 12 PR tyres and DW 16-26 wheels on 23.1-26 14 PR tyres and DW 20-26 wheels on 18.4-34 tyres on 28.1-26 tyres wide axle adjustäble axle on 23.1-26 12 PR tyres and DW 16-26 wheels on 23.1-26 14 PR tyres and DW 20-26 wheels on 18.4-34 tyres on 28.1-26 tyres 2450 mm (96 1/2 in) 2550 mm (100 1/2 in) 2510 mm (98 3/4 in) 2780 mm (109 1/2 in) 2050 mm (80 3/4 in) 2300 mm (90 1/2 in) 2500 mm (98 1/2 in) 2700 mm (106 1/4 in) 3000 mm (118 in) 3140 mm (123 1/2 in) 2980 mm (117 1/4 in) 3500 mm (137 3/4 in) 3650 mm (143 3/4 in) 420 mm (16 1/2 in) 16800 mm (661 1/2 in) 1.12
  17. Da 106 .... 56 SPECIFICATIONS DOMINATOR 96 .......-----------L--------------.. Operating Position WIDTH B Cutting width 3.60 m 3.90 m 4.50 m 5.10 m 5.70 m (12ft) (13ft) (15ft) (17ft) (19ft) Overall width 5190 mm 5565 mm 6175 mm 6785 mm 7395 mm (204 1/4 in) (219 in) (243 in) (267 1/4 in) (291 1/4 in) Overall widths are with deflectors set out on each side by 600 mm (23 3/4 in). With four-row (3 m) maize picker head 3260 mm (128 1/4 in) With five-row maize oicker head 4060 mm (159 3/4 in) With six-row maize picker head 5200 mm (204 3/4 in) HEIGHT H LENGTH L Ta top of grain tank When grain tank lid is open To top of cab To bottom edge of gran tank Without dividers With hoop dividers With long dividers With short dividers With maize picker head With straw hood back panel adjusted to rearward position With straw spreader 3720 mm (146 1/2 in) add 415 mm ( 16 11/32 in) 3680 mm (144 3{4 in) 3530 mm (139 in) 9190 mm (361 3/4 in) 9550 mm (376 in) 10540 mm (415 in) 10290 mm (405 in) 10220 mm (402 1/4 in) add 300 mm (11 3/4 in) add 500 mm (19 3/4 in) 1.13
  18. 00 106 .... 56 SPECIFICATIONS DOMINATOR 96 ...---- B------.e Transport Position ......- - - - - - - - - - - L---------------l.. WIDTH B Cutting width 3.60 m 3.90 m 4.50 m 5.10 m 5.70 m (12ft) (13 ft) (15ft) (17ft) (19 ft) Overall width 3990 mm 4365 mm 4975 mm 5585 mm 6195 mm (157 in) (171 3/4) '( 195 3/4) (220 in) (244 in) With cutterbar detached 3000 mm (118 in) With four-row (3 m) maize picker head 3000 mm (118 in) With five-row maize picker head 3800 mm (149 1/4 in) With six-row maize picker head 4940 mm (194 1/2 in) HEIGHT L LENGTH L 1.14 To top of grain tank To top of cab With cutterbar detached Without dividers With hoop dividers With long dividers With short dividers With maize picker head 3720 mm (146 1/2 in) 3680 mm (144 3/4 in) 7770 mm (306 in) 9290 mm (365 3/4 in) 9650 mm (380 in) 10640 mm (419 in) 10390 mm (409 in) 10320 mm (406 1/4 in)
  19. SPECIFICATIONS DOMINATOR 96 SETTINGS AND CAPACITIES Hydraulic Oil Pressures Lift hydraulic system pressure relief valve Hydrostatic steering system pressure relief valve Hydrostatic ground drive: (LINDE hydrostatic pump BPV 70 S) Charge pressure Operating pressure (SAUER hydrostatic pump SPV 22) Charge pressure Operating pressure Oil capacities Transmission gearbox Final drive gearboxes Lift hydraulic system LI NDE hydrostatic ground drive system SAUER hydrostatic ground drive system Engines Slip clutches Reel Main table auger Upper feed rake shaft Returns elevator 180 bar (2610 psi) 90+5 bar (1305+72.5 psi) 16 bar ( 232 psi) 420 bar (6091 psi) 14 bar ( 203 psi) 420 bar (6091 psi) • 6 litres (5.3 Imp. qt; 6.3 U.S. qt) SAE 90 (M IL-L-21 05) API-G L-4-90 Transmission Oil 3 litres each (2.6 Imp. qt; 3.2 U.S. qt) SAE 90 (MIL-L-2105) API-GL-4-90 Transmission Oil approx.6 litres (5.3 Imp. qt, 6.3 U.S. qt) Hydraulic Oil, H-LP Oils conforming to (DIN 51524) ISO-VG 68 Specifications approx. 8 litres (7 Imp. qt; 8.5 U.S. qt) Hydraulic Oil, H-LP Oils conforming to (DIN 51524) ISO-VG 68 Specifications approx. 27 litres (23.76 Imp. qt; 28.5 U.S. qt) Hydraulic Oil, H-LP Oils conforming to (DIN 51524) ISO-VG 68 Specifications consult engine instruction book and combine operator's manual 200 Nm (145 ft Ib) 200 Nm (145 ft Ib) 220 Nm (159 ft Ib) adjust ratchet clutch so that no play exists DO 106 .... 56 1.15
  20. 00 106 .... 56 SPECIFICATIONS DOMINATOR 96 Shear Bolt Grain tank unloading system Knife Register Reel Basic setting Main table auger Basic setting Concave Control (initial) setting M 10 x 45 DIN 931-8.8 the center of the knife sections should line up with the center of the cutterbar fingers at each end of the knife stroke reel drive shaft placed vertically over the knife. The tines should be adjusted to vertical position. approx. 15 mm (19/32 in) clearance between auger flights and bottom of cutterbar concave entrance: 13 mm (1/2 in) clearance measured at third concave bar concave exit: concave main adjusting lever: concave rear adjusting lever: 3 mm (1/8 in) clearance measured at third last concave bar locked in 3rd hole of quadrant locked in 1st hole of quadrant (e =narrow) Brakes Steering 1.16 Foot brake Hand brake brake must grip when the pedal is depressed through one third of its total travel brake should be effective with the handle locked in the first three to four teeth in the segment. with the steering cylinder piston rod fully extended, the adjustable stop bolts must be contacting the steering arms
  21. DO 106 .... 56 SPECIFICATIONS DOMINATOR 86 TechniCaI data, dimensions and weights are given as an indication only. CLAAS reserve the right to make changes in design and specifications at any time without previous notice and ejects all responsibilit'! in case of errors. NOTE: Front, rear, right and left refer to direction of travel. To be sure, always compare settings and filling capacities with specifications stated in the appropriate Operator's Manual for the machine concerned. 5.70 m (19 ft) 5.10 m (17 ft) 4.50m (15 ft) 3.90 m (13 ft) 3.60 m (12 ft) hydraulic from 360 mm (14 1/4 in) below ground level to 1300 mm (51 114 in) above ground level with floatation springs in use 900 mm (35 1/2 in) with floatation springs blocked 1040 mm (41 in) belt-operated variable speed drive hydraulic chain-type feed rake belt-operated Height adjustment Cutting height range Cutterbar Cutting widths Clearance height under cutterbar skid Reel drive Reel height adjustment Feeder house Cutterbar clutch Threshing Equipment Stone trap Concave Disawning Threshing drum standard equipment adjustable from operator's platform rear of concave separately adjustable (2nd lever) width 1320 mm (52 in), 12 bar disawning plates underneath the concave, two and three disawning plates can be engaged separately width 1320 mm (52 in) diameter 450 mm (17 3/4 in) six rasp bars, six drum discs speed infinitely variable from 650 to 1500 1/min (rpm) Threshing mechanism clutch Optional: a) step pulley drive 800, 1000, 1200, 1500 1Imin (rpm) a1) additional speed 650 1/min (rpm) b) slow speed threshing drum drive kit, 3-speed chain drive: 300, 430 and 550 1/min (rpm) belt-operated 1.17
  22. Thank you very much for your reading. Please Click Here. Then Get COMPLETE MANUAL. NO WAITING NOTE: If there is no response to click on the link above, please download the PDF document first and then click on it.
  23. 00 106 .... 56 SPECIFICATIONS DOMINATOR 86 Straw Walkers Type No. of walker racks No. of walker crankshafts Speed of walker crankshafts No. of tine crankshafts No. of tines per crankshafts Walker area Separating area Cleaning Type Wind volume control Total cleaning area Grain tank Capacity Unloading tube step typ walkers and intensive separation system (crankshaft with tines) five two 220_5 1/min (rpm) two five 5.15 m2 (7982.5 sq in) 5.95 m2 (9222.5 sq in) forced air cleaning fan by infinitely variable fan speed additional fan shutters (optional) 4.25 m2 (6588 sq in) 4600 Iitres (126.5 Imp. bushels; 130.6 U.S. bushels) hydraulically operated position control Engines Cubic capacity Max. speed 1Imin (rpm) Idle speed 1/min (rpm) kW (DIN H.P.) Cooling Mercedes OM 352 5675 cm3 (346 in3 ) 2600 1150 88 (120) water Perkins 6.3724 6100 cm3 (372 in3 ) 2600 1150 88 (120) water Fuel tank capacity Battery 1.18 300 Iitres (66 Imp. gal; 79 U.S. gal) 12 Volt, 110 Ah
  24. DO 106 .... 56 SPECIFICATIONS DOMINATOR 86 Ground Drive a) Mechanical Clutch Transmission Speed range Traction Wheel Drive Steering Brakes Tyres and Tyre Pressures Foot brake Hand brake variable ground speed, hydraulically controlled dry single disc clutch three forward, one reverse gear on, 18.4-30 R1 /.23.1-26 R1 tyres 1. Gear 1.6 to 4.0 km/h (0.9 to 2.5 mph) 2. Gear 3.5 to 8.6 km/h (2.4 to 5.3 mph) 3. Gear 8.0 to 19.7 km/h (5.0 to 12.2 mph) R.-Gear 2.8 to 6.9 km/h (1.7 to 4.3 mph) via final drive gears in oil bath hydrostatic hydraulic, designed to work independently when the pedal lock is removed mechanical, independent of foot brake maximum minimum tyre pressure tyre size tyre maize picker head grain cutterbar pressure six-row five-row 5.70 m 5.10 m 4.50m 3.90 m 3.60 m four-row (19 ft) (17 ft) (15 ft) (13 ft) (12 ft) bar (psi) bar (psi) bar (psi) bar (psi) bar (psi) bar (psi) 18.4-30 12 PR 2.9 (42) - - - - 2.9 (42) 18.4~34 12 PR 2.9 (42) - 2.9 (42) 2.9 (42) 2.5 (36) 2.4 (35) 23.1-26 12 PR 2.1 (30) 2.0 (29) 1.9 (27) 1.9 (27) 1.7 (25) 1.6 (23) 28.1-26 12 PR 1.8 (26) 1.5 (22) 1.5 (22) 1.5 (22) 1.1 (16) 1.1 (16) 12.5/80-18 6 PR - 2.7 (39) 2.7 (39) 2.7 (39) 2.7 (39) 2.7 (39) 12.5/80-18 10 PR - 2.7 (39) 2.7 (39) 2.7 (39) 2.7 (39) 2.7 (39) 14.5/75-20 8 PR - 2.0 (29) 2.0 (29) 2.0 (29) 2.0 (29) 2.0 (29) Where ground conditions allow maximum tyre_pressure, the maximLam tyre pressure should be maintained in order to obtain the longest possible service of the tyre. Torque Settings of Wheel Bolts and Wheel Nuts Front wheels with flange nuts M22 x 1.5 and special washer (Limes) C 22.5 DIN 74361 = 520 Nm (376 ft lb) Rear wheels M 18 x 1.5 wheel bolts = 325 Nm (235 ft lb) 1.19
  25. DO 106 .... 56 SPECIFICATIONS DOMINATOR 86 Weights Combine equipped with 18.4-30 R1 and 12.5/80-18 Impl. tyres, empty fuel tank, six cylinder engine. Determine the total weight of the machine by adding the weight of the equipment used on the combine to the weight of th"e basic machine. Basic machine (without cutterbar) With long lip cutterbar and spring tine reel 3.60 m (12 ft) 3.90 m (13 ft) 4.50 m (15 ft) 5.10m(17ft) 5.70 m (19 ft) Two cpl. divider assemblies With straw chopper With cab and ventilating system With four-row maize picker head With five-row maize picker head With six-row maize picker head With maize head stalk chopper With wheel vveights (one set) With liquid ballast (magnesium chloride solution) filled into 12.5/80-18 rear tyres With extra weights in compliance with road regulations (not for all countries) Combine Dimensions 7170 kg (15807 Ib) add 920 kg ( 20281b) add 960 kg ( 2116 Ib) add 1040 kg ( 2293 Ib) add 1120 kg ( 24691b) add 1200 kg ( 2646 Ib) add 50 kg ( 110 Ib) add 264 kg ( 5821b) add 260 kg ( 5731b) add 1260 kg ( 27781b) add 1510 kg ( 33291b) add 1740 kg ( 3836 Ib) add 250 kg ( 551 Ib) add 104 kg ( 2291b) add 210 kg ( 4631b) add 300 kg ( 661 Ib) Wheel Tread Width over Tyres Wheel Base Ground Clearance front rear on 18.4-30 tyres on 23.1-26 tyres on 18.4-34 tyres wide rear axle adjustable rear axle on 18.4-30 tyres on 23.1-26 tyres on 18.4-34 tyres 2522 mm (99 1/4 in) 2450 mm (96 1/2 in) 2510 mm (99 in) 2050 mm (80 3/4 in) 2300 mm (90 1/2 in) 2500 mm (98 1/2 in) 2700 mm (106 1/4 in) 2967 mm (116 3/4 in) 2985 mm (117 1/2 in) 2975 mm (117 in) 3650 mm (143 3/4 in) 380 mm (15 in) Turning Diameter, conforming to DIN 70020 Specifications 1.20 15900 mm (626 in)
Anzeige