1. Product Overview
Solar subsurface pump system
solarpump
Solar Energy
Solar Heat
Mounting System
Solar subsurface pump system
solarpump 300, 450, 600 and 1000
english

2. SOLAR SUBSURFACE PUMP SYSTEM solar|pump The system comprises four performance classes. * PV module under STC: AM 1.5; E= 1000 W/m²
How it works: Example 1 Example 2
The solar subsurface pump system is used to deliver ground water independently and off-line. With its modular construction, You desire a pump system with a delivery volume You desire a pump system with a delivery capacity of at least
- If the delivery head is not listed in of at least 3,000 litres per hour and a delivery 800 litres per hour and a delivery head of 80 metres.
the individual components can be adapted to meet all requirements and application areas.
the tables, round it up to the next head of 15 metres.
higher available value. >> The delivery head “80 m” is not listed in any of the tables.
- Determining values not listed in >> Starting with the smallest solar pump, look for Therefore always round up to the next higher available delivery
Properties the table by interpolation or the value “15 m” in the tables and check the asso- head, in this case “100 m”. Starting with the smallest solar pump,
extrapolation is not permitted. ciated delivery flow rate: The value of “3,000 litres look for the value “100 m” in the tables and check the associated
- If the delivery head is lower with per hour” is first met by the solarpump 500, and delivery flow rate: solarpump 500 equates to 520 litres per hour,
• Module surface area: 2,5 – 7,5 m² the same pump, this does not in this case, with 4,500 litres per hour, exceeded. solarpump 1000 970 litres per hour.
• High stability (calculated according to DIN 1055/ EC 1)
1055 result in a higher delivery volume.
- Only the same delivery volume The two search values of 3,000 litres per hour The two search values of 800 litres per hour and a delivery head
• Continuously adjustable irradiation angle and azimuth may be planned. and a delivery head of 15 metres are met by the of 80 metres are met by configuration solarpump 1000 SQF-1.2-2
• Weight optimisation and prevention of rust formation through use of aluminium / steel configuration solarpump SQF-5A-6.
• PV module installation with proven aluminium profiles from the in-house Quick-Line assembly system
• Cable conduits and control assembly in mast, as required with protection against unauthorised access
• Space-saving installation (modules can be sited above the well) 1 solar|pump 300 Delivery head Pump capacity* Pump type
• Pump with run-dry protection, overvoltage and undervoltage protection as well as overload protection, 15 m 1.140 Liter/h SQF-1.2-2
overtemperature protection, maximum power point tracking, wide input voltage range • MPP output: 312 Wp
30 m 540 Liter/h SQF-0.6-2
• Simple system installation with factory pre-assembly • 1 mast Type A
• Easy installation and maintenance of pump • 1 module mount 50 m 530 Liter/h SQF-0.6-2
• Installation on concrete foundations • 2 modules 75 m 500 Liter/h SQF-0.6-2
• Optional: upgrade with energy storage system • 2 strings
Structure 2 solar|pump 450 Delivery head Pump capacity* Pump type
The system comprises the following components: 15 m 4.500 Liter/h SQF-5A-6
b
• MPP output: 468 Wp
30 m 2.300 Liter/h SQF-2.5-2
a Mast:
Mast: two design types – mast A for one module mount • 1 mast Type A
and mast B for two module mounts • 1 module mount 50 m 1.090 Liter/h SQF-1.2-2
• 3 modules 75 m 1.050 Liter/h SQF-1.2-2
b Module mount with modules: two design types
modules: • 3 strings
f 100 m 520 Liter/h SQF-0.6-2
for 2 or 3 photovoltaic modules a
c
c Pump:
Pump: Grundfos SQ-Flex series submersible pump complete
with d polyethylene pipe DN 30 (PE-HD drinking water,
e
3 solar|pump 600 Delivery head Pump capacity* Pump type
outside diameter: 32 mm, wall thickness: 2.4 mm), 15 m 5.600 Liter/h SQF-5A-6
e submarine cable, stainless steel support cable (cut to length), • MPP output: 624 Wp
30 m 3.000 Liter/h SQF-3A-10
screw connections, electrical connecting terminals, shrink • 1 mast Type B
sleeve set d • 2 module mount 50 m 2.100 Liter/h SQF-2.5-2
f Disconnector unit (mp-tec) incl. fuse • 4 modules 100 m 970 Liter/h SQF-1.2-2
Optional: at extra charge, delivery with Grundfos CU200 • 2 strings
pump control unit incl. float switch
PV MODULE – Thin film module (example) PUMP – Grundfos SQ-Flex series
4 solar|pump 1000 Delivery head Pump capacity* Pump type
Rated power Pmax 155 Wp Power consumption max. 900 W 15 m 6.600 Liter/h SQF-8A-3
• MPP output: 936 Wp
Rated voltage Umpp 80 V Power I max. 7A 30 m 4.400 Liter/h SQF-5A-6
• 1 mast Type B
Rated current Impp 1,95 A Voltage U min. – U max. 30 – 300 V / DC • 2 module mount 50 m 2.750 Liter/h SQF-2.5-2
Open-circuit voltage Uoc 108,0 V • 6 modules 75 m 1.050 Liter/h SQF-1.2-2
• 2 strings
Short-circuit current Isc 2,20 A 100 m 970 Liter/h SQF-1.2-2
Hotline +49 (0) 33 34.59 44 40 Subject to change without notice. Images and descriptions do not claim to be exhaustive. Subject to change without notice. Images and descriptions do not claim to be exhaustive. mp-tec Product Overview

3. Dimensions
30°
30°
3.615 mm
3.300 mm
3.000 mm
2.600 mm
3.000 mm
3.865 mm
3.300 mm
2.350 mm
solar|pump 300 Mast type A solar|pump 450 Mast type A
30°
30°
3.350 mm
3.300 mm
2.660 mm
3.900 mm
3.300 mm
2.390 mm
solar|pump 600 Mast type B solar|pump 1000 Mast type B
up to * Guarantee: up to a 15-years on the mounting system
easy to handle 15 years
virtually
* and 3-years on the pump
maintenance-free
product guarantee
Hotline +49 (0) 33 34.59 44 40 Subject to change without notice. Images and descriptions do not claim to be exhaustive.