Suche senden
Hochladen
IRJET- Single Minute Exchange of Dies (SMED) Concept
•
0 gefällt mir
•
19 views
IRJET Journal
Folgen
https://www.irjet.net/archives/V6/i4/IRJET-V6I41013.pdf
Weniger lesen
Mehr lesen
Ingenieurwesen
Melden
Teilen
Melden
Teilen
1 von 5
Jetzt herunterladen
Downloaden Sie, um offline zu lesen
Empfohlen
A Review on Implementation of Lean Manufacturing Techniques in Manufacturing ...
A Review on Implementation of Lean Manufacturing Techniques in Manufacturing ...
IRJET Journal
IRJET- Productivity Improvement by Implementing Lean Manufacturing Tools ...
IRJET- Productivity Improvement by Implementing Lean Manufacturing Tools ...
IRJET Journal
The Impact of Lean Production on the Cycle Time: A Case Study of a Welding As...
The Impact of Lean Production on the Cycle Time: A Case Study of a Welding As...
ijsrd.com
Kaizen Implementation to reduce “No-Stock” in Stores
Kaizen Implementation to reduce “No-Stock” in Stores
IRJET Journal
Manufacturing Lead Time Reduction in Monoblock (SWJ) Pump Industry [irjet-v4 ...
Manufacturing Lead Time Reduction in Monoblock (SWJ) Pump Industry [irjet-v4 ...
PERUMALSAMY M
Application of Lean Concepts in Molding Department
Application of Lean Concepts in Molding Department
IRJET Journal
Productivity improvement through lean deployment & work study methods
Productivity improvement through lean deployment & work study methods
eSAT Journals
IRJET- Productivity Improvement by Time Study Analysis Moderate Scale Ind...
IRJET- Productivity Improvement by Time Study Analysis Moderate Scale Ind...
IRJET Journal
Empfohlen
A Review on Implementation of Lean Manufacturing Techniques in Manufacturing ...
A Review on Implementation of Lean Manufacturing Techniques in Manufacturing ...
IRJET Journal
IRJET- Productivity Improvement by Implementing Lean Manufacturing Tools ...
IRJET- Productivity Improvement by Implementing Lean Manufacturing Tools ...
IRJET Journal
The Impact of Lean Production on the Cycle Time: A Case Study of a Welding As...
The Impact of Lean Production on the Cycle Time: A Case Study of a Welding As...
ijsrd.com
Kaizen Implementation to reduce “No-Stock” in Stores
Kaizen Implementation to reduce “No-Stock” in Stores
IRJET Journal
Manufacturing Lead Time Reduction in Monoblock (SWJ) Pump Industry [irjet-v4 ...
Manufacturing Lead Time Reduction in Monoblock (SWJ) Pump Industry [irjet-v4 ...
PERUMALSAMY M
Application of Lean Concepts in Molding Department
Application of Lean Concepts in Molding Department
IRJET Journal
Productivity improvement through lean deployment & work study methods
Productivity improvement through lean deployment & work study methods
eSAT Journals
IRJET- Productivity Improvement by Time Study Analysis Moderate Scale Ind...
IRJET- Productivity Improvement by Time Study Analysis Moderate Scale Ind...
IRJET Journal
IRJET - 5S Method and its Implementation in Company
IRJET - 5S Method and its Implementation in Company
IRJET Journal
synopsis
synopsis
Kesavan Vjs
Report on JIT , for Projects and Seminars
Report on JIT , for Projects and Seminars
omkar jagtap
IRJET- Improving Productivity in a Mechanical Industry using Industrial Engin...
IRJET- Improving Productivity in a Mechanical Industry using Industrial Engin...
IRJET Journal
Lean construction
Lean construction
Sorab Mishra
Jit ppt with case study
Jit ppt with case study
omkar jagtap
IRJET- Optimization of Cycle Time by using Various Techniques: A Review
IRJET- Optimization of Cycle Time by using Various Techniques: A Review
IRJET Journal
IRJET- Implementing Lean Manufacturing Principle in Fabrication Process- A...
IRJET- Implementing Lean Manufacturing Principle in Fabrication Process- A...
IRJET Journal
IRJET- Enhance the Capacity of Outer Tube Machining Cell
IRJET- Enhance the Capacity of Outer Tube Machining Cell
IRJET Journal
Just in Time System: A Study and Review
Just in Time System: A Study and Review
vivatechijri
IRJET- Application of Continuous Improvement Process in Manufacturing Industry
IRJET- Application of Continuous Improvement Process in Manufacturing Industry
IRJET Journal
Joined document 24_5
Joined document 24_5
JOSEPH FRANCIS
IRJET- Deburring Methods for Elimination of Chips in the Internal Tubes of Fr...
IRJET- Deburring Methods for Elimination of Chips in the Internal Tubes of Fr...
IRJET Journal
Implementation of Single Minute Exchange of Die in Motor Manufacturing Unit
Implementation of Single Minute Exchange of Die in Motor Manufacturing Unit
IRJET Journal
A036501014
A036501014
theijes
Implementation of Lean Manufacturing Principles in Foundries
Implementation of Lean Manufacturing Principles in Foundries
IJMER
IMPLEMENTATION OF LEAN MANUFACTURING TOOLS FOR IMPROVING PRODUCTIVITY: A CASE...
IMPLEMENTATION OF LEAN MANUFACTURING TOOLS FOR IMPROVING PRODUCTIVITY: A CASE...
Journal For Research
IRJET- Applications of Lean Six Sigma
IRJET- Applications of Lean Six Sigma
IRJET Journal
IRJET- Improving Quality and Productivity in Switchgear Tank Welding through ...
IRJET- Improving Quality and Productivity in Switchgear Tank Welding through ...
IRJET Journal
A throughput bulletin for Texport Syndicate, post vsm
A throughput bulletin for Texport Syndicate, post vsm
Sourav Kumar
PRODUCTIVITY IMPROVEMENT USING LEAN TOOLS IN PUMP INDUSTRY
PRODUCTIVITY IMPROVEMENT USING LEAN TOOLS IN PUMP INDUSTRY
IRJET Journal
IMPLEMENTATION OF LEAN TECHNIQUES IN INDIAN SCEANIRO AND TESTING ITS FITNESS
IMPLEMENTATION OF LEAN TECHNIQUES IN INDIAN SCEANIRO AND TESTING ITS FITNESS
IRJET Journal
Weitere ähnliche Inhalte
Was ist angesagt?
IRJET - 5S Method and its Implementation in Company
IRJET - 5S Method and its Implementation in Company
IRJET Journal
synopsis
synopsis
Kesavan Vjs
Report on JIT , for Projects and Seminars
Report on JIT , for Projects and Seminars
omkar jagtap
IRJET- Improving Productivity in a Mechanical Industry using Industrial Engin...
IRJET- Improving Productivity in a Mechanical Industry using Industrial Engin...
IRJET Journal
Lean construction
Lean construction
Sorab Mishra
Jit ppt with case study
Jit ppt with case study
omkar jagtap
IRJET- Optimization of Cycle Time by using Various Techniques: A Review
IRJET- Optimization of Cycle Time by using Various Techniques: A Review
IRJET Journal
IRJET- Implementing Lean Manufacturing Principle in Fabrication Process- A...
IRJET- Implementing Lean Manufacturing Principle in Fabrication Process- A...
IRJET Journal
IRJET- Enhance the Capacity of Outer Tube Machining Cell
IRJET- Enhance the Capacity of Outer Tube Machining Cell
IRJET Journal
Just in Time System: A Study and Review
Just in Time System: A Study and Review
vivatechijri
IRJET- Application of Continuous Improvement Process in Manufacturing Industry
IRJET- Application of Continuous Improvement Process in Manufacturing Industry
IRJET Journal
Joined document 24_5
Joined document 24_5
JOSEPH FRANCIS
IRJET- Deburring Methods for Elimination of Chips in the Internal Tubes of Fr...
IRJET- Deburring Methods for Elimination of Chips in the Internal Tubes of Fr...
IRJET Journal
Implementation of Single Minute Exchange of Die in Motor Manufacturing Unit
Implementation of Single Minute Exchange of Die in Motor Manufacturing Unit
IRJET Journal
A036501014
A036501014
theijes
Implementation of Lean Manufacturing Principles in Foundries
Implementation of Lean Manufacturing Principles in Foundries
IJMER
IMPLEMENTATION OF LEAN MANUFACTURING TOOLS FOR IMPROVING PRODUCTIVITY: A CASE...
IMPLEMENTATION OF LEAN MANUFACTURING TOOLS FOR IMPROVING PRODUCTIVITY: A CASE...
Journal For Research
IRJET- Applications of Lean Six Sigma
IRJET- Applications of Lean Six Sigma
IRJET Journal
IRJET- Improving Quality and Productivity in Switchgear Tank Welding through ...
IRJET- Improving Quality and Productivity in Switchgear Tank Welding through ...
IRJET Journal
A throughput bulletin for Texport Syndicate, post vsm
A throughput bulletin for Texport Syndicate, post vsm
Sourav Kumar
Was ist angesagt?
(20)
IRJET - 5S Method and its Implementation in Company
IRJET - 5S Method and its Implementation in Company
synopsis
synopsis
Report on JIT , for Projects and Seminars
Report on JIT , for Projects and Seminars
IRJET- Improving Productivity in a Mechanical Industry using Industrial Engin...
IRJET- Improving Productivity in a Mechanical Industry using Industrial Engin...
Lean construction
Lean construction
Jit ppt with case study
Jit ppt with case study
IRJET- Optimization of Cycle Time by using Various Techniques: A Review
IRJET- Optimization of Cycle Time by using Various Techniques: A Review
IRJET- Implementing Lean Manufacturing Principle in Fabrication Process- A...
IRJET- Implementing Lean Manufacturing Principle in Fabrication Process- A...
IRJET- Enhance the Capacity of Outer Tube Machining Cell
IRJET- Enhance the Capacity of Outer Tube Machining Cell
Just in Time System: A Study and Review
Just in Time System: A Study and Review
IRJET- Application of Continuous Improvement Process in Manufacturing Industry
IRJET- Application of Continuous Improvement Process in Manufacturing Industry
Joined document 24_5
Joined document 24_5
IRJET- Deburring Methods for Elimination of Chips in the Internal Tubes of Fr...
IRJET- Deburring Methods for Elimination of Chips in the Internal Tubes of Fr...
Implementation of Single Minute Exchange of Die in Motor Manufacturing Unit
Implementation of Single Minute Exchange of Die in Motor Manufacturing Unit
A036501014
A036501014
Implementation of Lean Manufacturing Principles in Foundries
Implementation of Lean Manufacturing Principles in Foundries
IMPLEMENTATION OF LEAN MANUFACTURING TOOLS FOR IMPROVING PRODUCTIVITY: A CASE...
IMPLEMENTATION OF LEAN MANUFACTURING TOOLS FOR IMPROVING PRODUCTIVITY: A CASE...
IRJET- Applications of Lean Six Sigma
IRJET- Applications of Lean Six Sigma
IRJET- Improving Quality and Productivity in Switchgear Tank Welding through ...
IRJET- Improving Quality and Productivity in Switchgear Tank Welding through ...
A throughput bulletin for Texport Syndicate, post vsm
A throughput bulletin for Texport Syndicate, post vsm
Ähnlich wie IRJET- Single Minute Exchange of Dies (SMED) Concept
PRODUCTIVITY IMPROVEMENT USING LEAN TOOLS IN PUMP INDUSTRY
PRODUCTIVITY IMPROVEMENT USING LEAN TOOLS IN PUMP INDUSTRY
IRJET Journal
IMPLEMENTATION OF LEAN TECHNIQUES IN INDIAN SCEANIRO AND TESTING ITS FITNESS
IMPLEMENTATION OF LEAN TECHNIQUES IN INDIAN SCEANIRO AND TESTING ITS FITNESS
IRJET Journal
Challenges in implementing Total Productive Maintenance in Indian Manufacturi...
Challenges in implementing Total Productive Maintenance in Indian Manufacturi...
IRJET Journal
Manufacturing Lead Time Reduction in Monoblock (SWJ) Pump Industry
Manufacturing Lead Time Reduction in Monoblock (SWJ) Pump Industry
IRJET Journal
IRJET- Design of Manufacture of Fixtures for CNC Machine to Improve Productiv...
IRJET- Design of Manufacture of Fixtures for CNC Machine to Improve Productiv...
IRJET Journal
IRJET-Methodology for Modular Fixturing System
IRJET-Methodology for Modular Fixturing System
IRJET Journal
Minimising waste in construction by using lean six sigma principle
Minimising waste in construction by using lean six sigma principle
IAEME Publication
Minimising waste in construction by using lean six sigma principle
Minimising waste in construction by using lean six sigma principle
IAEME Publication
Implementation of 5S Methodology in a Food & Beverage Industry: A Case Study
Implementation of 5S Methodology in a Food & Beverage Industry: A Case Study
IRJET Journal
IRJET- Project on Time Study to Increase the Overall Productivity
IRJET- Project on Time Study to Increase the Overall Productivity
IRJET Journal
Overall Equipment Effectiveness in Construction Equipments
Overall Equipment Effectiveness in Construction Equipments
IRJET Journal
Application of value stream mapping tool to reduce wastes in bearing industry
Application of value stream mapping tool to reduce wastes in bearing industry
ijmech
IRJET- Production Line Optimization using Lean Tools: A Case Study of Automot...
IRJET- Production Line Optimization using Lean Tools: A Case Study of Automot...
IRJET Journal
5 s implementation and its effect on physical workload
5 s implementation and its effect on physical workload
eSAT Publishing House
Submission of mba spring 2012
Submission of mba spring 2012
Shraddha Singh
B44090512
B44090512
IJERA Editor
A case study on productivity improvement of wearing insert and cutting ring
A case study on productivity improvement of wearing insert and cutting ring
IJECSJournal
Concurrent Engineering- for Environment & Sustainability
Concurrent Engineering- for Environment & Sustainability
IRJET Journal
Productivity Improvement by Optimum Utilization of Plant Layout: A Case Study
Productivity Improvement by Optimum Utilization of Plant Layout: A Case Study
IRJET Journal
Line Balancing and facility optimization of Machine Shop with Work Study and ...
Line Balancing and facility optimization of Machine Shop with Work Study and ...
IRJET Journal
Ähnlich wie IRJET- Single Minute Exchange of Dies (SMED) Concept
(20)
PRODUCTIVITY IMPROVEMENT USING LEAN TOOLS IN PUMP INDUSTRY
PRODUCTIVITY IMPROVEMENT USING LEAN TOOLS IN PUMP INDUSTRY
IMPLEMENTATION OF LEAN TECHNIQUES IN INDIAN SCEANIRO AND TESTING ITS FITNESS
IMPLEMENTATION OF LEAN TECHNIQUES IN INDIAN SCEANIRO AND TESTING ITS FITNESS
Challenges in implementing Total Productive Maintenance in Indian Manufacturi...
Challenges in implementing Total Productive Maintenance in Indian Manufacturi...
Manufacturing Lead Time Reduction in Monoblock (SWJ) Pump Industry
Manufacturing Lead Time Reduction in Monoblock (SWJ) Pump Industry
IRJET- Design of Manufacture of Fixtures for CNC Machine to Improve Productiv...
IRJET- Design of Manufacture of Fixtures for CNC Machine to Improve Productiv...
IRJET-Methodology for Modular Fixturing System
IRJET-Methodology for Modular Fixturing System
Minimising waste in construction by using lean six sigma principle
Minimising waste in construction by using lean six sigma principle
Minimising waste in construction by using lean six sigma principle
Minimising waste in construction by using lean six sigma principle
Implementation of 5S Methodology in a Food & Beverage Industry: A Case Study
Implementation of 5S Methodology in a Food & Beverage Industry: A Case Study
IRJET- Project on Time Study to Increase the Overall Productivity
IRJET- Project on Time Study to Increase the Overall Productivity
Overall Equipment Effectiveness in Construction Equipments
Overall Equipment Effectiveness in Construction Equipments
Application of value stream mapping tool to reduce wastes in bearing industry
Application of value stream mapping tool to reduce wastes in bearing industry
IRJET- Production Line Optimization using Lean Tools: A Case Study of Automot...
IRJET- Production Line Optimization using Lean Tools: A Case Study of Automot...
5 s implementation and its effect on physical workload
5 s implementation and its effect on physical workload
Submission of mba spring 2012
Submission of mba spring 2012
B44090512
B44090512
A case study on productivity improvement of wearing insert and cutting ring
A case study on productivity improvement of wearing insert and cutting ring
Concurrent Engineering- for Environment & Sustainability
Concurrent Engineering- for Environment & Sustainability
Productivity Improvement by Optimum Utilization of Plant Layout: A Case Study
Productivity Improvement by Optimum Utilization of Plant Layout: A Case Study
Line Balancing and facility optimization of Machine Shop with Work Study and ...
Line Balancing and facility optimization of Machine Shop with Work Study and ...
Mehr von IRJET Journal
TUNNELING IN HIMALAYAS WITH NATM METHOD: A SPECIAL REFERENCES TO SUNGAL TUNNE...
TUNNELING IN HIMALAYAS WITH NATM METHOD: A SPECIAL REFERENCES TO SUNGAL TUNNE...
IRJET Journal
STUDY THE EFFECT OF RESPONSE REDUCTION FACTOR ON RC FRAMED STRUCTURE
STUDY THE EFFECT OF RESPONSE REDUCTION FACTOR ON RC FRAMED STRUCTURE
IRJET Journal
A COMPARATIVE ANALYSIS OF RCC ELEMENT OF SLAB WITH STARK STEEL (HYSD STEEL) A...
A COMPARATIVE ANALYSIS OF RCC ELEMENT OF SLAB WITH STARK STEEL (HYSD STEEL) A...
IRJET Journal
Effect of Camber and Angles of Attack on Airfoil Characteristics
Effect of Camber and Angles of Attack on Airfoil Characteristics
IRJET Journal
A Review on the Progress and Challenges of Aluminum-Based Metal Matrix Compos...
A Review on the Progress and Challenges of Aluminum-Based Metal Matrix Compos...
IRJET Journal
Dynamic Urban Transit Optimization: A Graph Neural Network Approach for Real-...
Dynamic Urban Transit Optimization: A Graph Neural Network Approach for Real-...
IRJET Journal
Structural Analysis and Design of Multi-Storey Symmetric and Asymmetric Shape...
Structural Analysis and Design of Multi-Storey Symmetric and Asymmetric Shape...
IRJET Journal
A Review of “Seismic Response of RC Structures Having Plan and Vertical Irreg...
A Review of “Seismic Response of RC Structures Having Plan and Vertical Irreg...
IRJET Journal
A REVIEW ON MACHINE LEARNING IN ADAS
A REVIEW ON MACHINE LEARNING IN ADAS
IRJET Journal
Long Term Trend Analysis of Precipitation and Temperature for Asosa district,...
Long Term Trend Analysis of Precipitation and Temperature for Asosa district,...
IRJET Journal
P.E.B. Framed Structure Design and Analysis Using STAAD Pro
P.E.B. Framed Structure Design and Analysis Using STAAD Pro
IRJET Journal
A Review on Innovative Fiber Integration for Enhanced Reinforcement of Concre...
A Review on Innovative Fiber Integration for Enhanced Reinforcement of Concre...
IRJET Journal
Survey Paper on Cloud-Based Secured Healthcare System
Survey Paper on Cloud-Based Secured Healthcare System
IRJET Journal
Review on studies and research on widening of existing concrete bridges
Review on studies and research on widening of existing concrete bridges
IRJET Journal
React based fullstack edtech web application
React based fullstack edtech web application
IRJET Journal
A Comprehensive Review of Integrating IoT and Blockchain Technologies in the ...
A Comprehensive Review of Integrating IoT and Blockchain Technologies in the ...
IRJET Journal
A REVIEW ON THE PERFORMANCE OF COCONUT FIBRE REINFORCED CONCRETE.
A REVIEW ON THE PERFORMANCE OF COCONUT FIBRE REINFORCED CONCRETE.
IRJET Journal
Optimizing Business Management Process Workflows: The Dynamic Influence of Mi...
Optimizing Business Management Process Workflows: The Dynamic Influence of Mi...
IRJET Journal
Multistoried and Multi Bay Steel Building Frame by using Seismic Design
Multistoried and Multi Bay Steel Building Frame by using Seismic Design
IRJET Journal
Cost Optimization of Construction Using Plastic Waste as a Sustainable Constr...
Cost Optimization of Construction Using Plastic Waste as a Sustainable Constr...
IRJET Journal
Mehr von IRJET Journal
(20)
TUNNELING IN HIMALAYAS WITH NATM METHOD: A SPECIAL REFERENCES TO SUNGAL TUNNE...
TUNNELING IN HIMALAYAS WITH NATM METHOD: A SPECIAL REFERENCES TO SUNGAL TUNNE...
STUDY THE EFFECT OF RESPONSE REDUCTION FACTOR ON RC FRAMED STRUCTURE
STUDY THE EFFECT OF RESPONSE REDUCTION FACTOR ON RC FRAMED STRUCTURE
A COMPARATIVE ANALYSIS OF RCC ELEMENT OF SLAB WITH STARK STEEL (HYSD STEEL) A...
A COMPARATIVE ANALYSIS OF RCC ELEMENT OF SLAB WITH STARK STEEL (HYSD STEEL) A...
Effect of Camber and Angles of Attack on Airfoil Characteristics
Effect of Camber and Angles of Attack on Airfoil Characteristics
A Review on the Progress and Challenges of Aluminum-Based Metal Matrix Compos...
A Review on the Progress and Challenges of Aluminum-Based Metal Matrix Compos...
Dynamic Urban Transit Optimization: A Graph Neural Network Approach for Real-...
Dynamic Urban Transit Optimization: A Graph Neural Network Approach for Real-...
Structural Analysis and Design of Multi-Storey Symmetric and Asymmetric Shape...
Structural Analysis and Design of Multi-Storey Symmetric and Asymmetric Shape...
A Review of “Seismic Response of RC Structures Having Plan and Vertical Irreg...
A Review of “Seismic Response of RC Structures Having Plan and Vertical Irreg...
A REVIEW ON MACHINE LEARNING IN ADAS
A REVIEW ON MACHINE LEARNING IN ADAS
Long Term Trend Analysis of Precipitation and Temperature for Asosa district,...
Long Term Trend Analysis of Precipitation and Temperature for Asosa district,...
P.E.B. Framed Structure Design and Analysis Using STAAD Pro
P.E.B. Framed Structure Design and Analysis Using STAAD Pro
A Review on Innovative Fiber Integration for Enhanced Reinforcement of Concre...
A Review on Innovative Fiber Integration for Enhanced Reinforcement of Concre...
Survey Paper on Cloud-Based Secured Healthcare System
Survey Paper on Cloud-Based Secured Healthcare System
Review on studies and research on widening of existing concrete bridges
Review on studies and research on widening of existing concrete bridges
React based fullstack edtech web application
React based fullstack edtech web application
A Comprehensive Review of Integrating IoT and Blockchain Technologies in the ...
A Comprehensive Review of Integrating IoT and Blockchain Technologies in the ...
A REVIEW ON THE PERFORMANCE OF COCONUT FIBRE REINFORCED CONCRETE.
A REVIEW ON THE PERFORMANCE OF COCONUT FIBRE REINFORCED CONCRETE.
Optimizing Business Management Process Workflows: The Dynamic Influence of Mi...
Optimizing Business Management Process Workflows: The Dynamic Influence of Mi...
Multistoried and Multi Bay Steel Building Frame by using Seismic Design
Multistoried and Multi Bay Steel Building Frame by using Seismic Design
Cost Optimization of Construction Using Plastic Waste as a Sustainable Constr...
Cost Optimization of Construction Using Plastic Waste as a Sustainable Constr...
Kürzlich hochgeladen
Module-1-(Building Acoustics) Noise Control (Unit-3). pdf
Module-1-(Building Acoustics) Noise Control (Unit-3). pdf
Manish Kumar
Input Output Management in Operating System
Input Output Management in Operating System
Rashmi Bhat
Robotics-Asimov's Laws, Mechanical Subsystems, Robot Kinematics, Robot Dynami...
Robotics-Asimov's Laws, Mechanical Subsystems, Robot Kinematics, Robot Dynami...
Sumanth A
DEVICE DRIVERS AND INTERRUPTS SERVICE MECHANISM.pdf
DEVICE DRIVERS AND INTERRUPTS SERVICE MECHANISM.pdf
AkritiPradhan2
Robotics Group 10 (Control Schemes) cse.pdf
Robotics Group 10 (Control Schemes) cse.pdf
sahilsajad201
Computer Graphics Introduction, Open GL, Line and Circle drawing algorithm
Computer Graphics Introduction, Open GL, Line and Circle drawing algorithm
Deepika Walanjkar
Gravity concentration_MI20612MI_________
Gravity concentration_MI20612MI_________
Romil Mishra
Python Programming for basic beginners.pptx
Python Programming for basic beginners.pptx
mohitesoham12
『澳洲文凭』买麦考瑞大学毕业证书成绩单办理澳洲Macquarie文凭学位证书
『澳洲文凭』买麦考瑞大学毕业证书成绩单办理澳洲Macquarie文凭学位证书
rnrncn29
Novel 3D-Printed Soft Linear and Bending Actuators
Novel 3D-Printed Soft Linear and Bending Actuators
Researcher Researcher
Paper Tube : Shigeru Ban projects and Case Study of Cardboard Cathedral .pdf
Paper Tube : Shigeru Ban projects and Case Study of Cardboard Cathedral .pdf
NainaShrivastava14
TechTAC® CFD Report Summary: A Comparison of Two Types of Tubing Anchor Catchers
TechTAC® CFD Report Summary: A Comparison of Two Types of Tubing Anchor Catchers
sdickerson1
multiple access in wireless communication
multiple access in wireless communication
panditadesh123
High Voltage Engineering- OVER VOLTAGES IN ELECTRICAL POWER SYSTEMS
High Voltage Engineering- OVER VOLTAGES IN ELECTRICAL POWER SYSTEMS
sandhya757531
Artificial Intelligence in Power System overview
Artificial Intelligence in Power System overview
sandhya757531
List of Accredited Concrete Batching Plant.pdf
List of Accredited Concrete Batching Plant.pdf
isabel213075
OOP concepts -in-Python programming language
OOP concepts -in-Python programming language
SmritiSharma901052
THE SENDAI FRAMEWORK FOR DISASTER RISK REDUCTION
THE SENDAI FRAMEWORK FOR DISASTER RISK REDUCTION
jhunlian
CME 397 - SURFACE ENGINEERING - UNIT 1 FULL NOTES
CME 397 - SURFACE ENGINEERING - UNIT 1 FULL NOTES
karthi keyan
KCD Costa Rica 2024 - Nephio para parvulitos
KCD Costa Rica 2024 - Nephio para parvulitos
Victor Morales
Kürzlich hochgeladen
(20)
Module-1-(Building Acoustics) Noise Control (Unit-3). pdf
Module-1-(Building Acoustics) Noise Control (Unit-3). pdf
Input Output Management in Operating System
Input Output Management in Operating System
Robotics-Asimov's Laws, Mechanical Subsystems, Robot Kinematics, Robot Dynami...
Robotics-Asimov's Laws, Mechanical Subsystems, Robot Kinematics, Robot Dynami...
DEVICE DRIVERS AND INTERRUPTS SERVICE MECHANISM.pdf
DEVICE DRIVERS AND INTERRUPTS SERVICE MECHANISM.pdf
Robotics Group 10 (Control Schemes) cse.pdf
Robotics Group 10 (Control Schemes) cse.pdf
Computer Graphics Introduction, Open GL, Line and Circle drawing algorithm
Computer Graphics Introduction, Open GL, Line and Circle drawing algorithm
Gravity concentration_MI20612MI_________
Gravity concentration_MI20612MI_________
Python Programming for basic beginners.pptx
Python Programming for basic beginners.pptx
『澳洲文凭』买麦考瑞大学毕业证书成绩单办理澳洲Macquarie文凭学位证书
『澳洲文凭』买麦考瑞大学毕业证书成绩单办理澳洲Macquarie文凭学位证书
Novel 3D-Printed Soft Linear and Bending Actuators
Novel 3D-Printed Soft Linear and Bending Actuators
Paper Tube : Shigeru Ban projects and Case Study of Cardboard Cathedral .pdf
Paper Tube : Shigeru Ban projects and Case Study of Cardboard Cathedral .pdf
TechTAC® CFD Report Summary: A Comparison of Two Types of Tubing Anchor Catchers
TechTAC® CFD Report Summary: A Comparison of Two Types of Tubing Anchor Catchers
multiple access in wireless communication
multiple access in wireless communication
High Voltage Engineering- OVER VOLTAGES IN ELECTRICAL POWER SYSTEMS
High Voltage Engineering- OVER VOLTAGES IN ELECTRICAL POWER SYSTEMS
Artificial Intelligence in Power System overview
Artificial Intelligence in Power System overview
List of Accredited Concrete Batching Plant.pdf
List of Accredited Concrete Batching Plant.pdf
OOP concepts -in-Python programming language
OOP concepts -in-Python programming language
THE SENDAI FRAMEWORK FOR DISASTER RISK REDUCTION
THE SENDAI FRAMEWORK FOR DISASTER RISK REDUCTION
CME 397 - SURFACE ENGINEERING - UNIT 1 FULL NOTES
CME 397 - SURFACE ENGINEERING - UNIT 1 FULL NOTES
KCD Costa Rica 2024 - Nephio para parvulitos
KCD Costa Rica 2024 - Nephio para parvulitos
IRJET- Single Minute Exchange of Dies (SMED) Concept
1.
International Research Journal
of Engineering and Technology (IRJET) e-ISSN: 2395-0056 Volume: 06 Issue: 04 | Apr 2019 www.irjet.net p-ISSN: 2395-0072 © 2019, IRJET | Impact Factor value: 7.211 | ISO 9001:2008 Certified Journal | Page 4665 Single Minute Exchange of Dies (SMED) concept Akshay Hasabe1, Akshay Kakde2, Ashish Khandagle3 , Kiran Surve4, Asst. Prof. Pankaj Pardeshi5 1,2,3,4Students, Department of Mechanical Engineering, Dr. D. Y. Patil Institute of Technology, Pimpri, Pune, India. 5Assistant Professor, Department of Mechanical Engineering, Dr. D. Y. Patil Institute of Techology,Pimpri, Pune, India. ---------------------------------------------------------------------***--------------------------------------------------------------------- Abstract - To survive in cutthroat competition, industries need to reduce production time and costs in order to improve operating performanceandflexibility. SingleMinuteExchange of Dies (SMED) mainly focuses on recognition of internal and external activities. Accordingly, this article has as its main objective to review the literature addressing this less studied topic: SMED. This paper covers the literature review of SMED tool and purpose of this literature review is to develop an overview of the conceptual framework of SMED tool. The various industrial applications and the existing articles indicate the relevance of thetopicandmethodology. Flexibility and responsiveness aremainpillarsofmanufacturing, whichis operated by demands of greaterproductvarietyandimproved quality. Key Words: changeover reduction, SMED concept , FMEA analysis , productivity Improvement, internal and external functions, Quality Tools etc 1.INTRODUCTION SMED was developed by Shigeo Shingo in 1950s Japan in response to the emerging needs of increasingly smaller production lot sizes required to meet the required flexibility for customer demand. The study was originally developed through the study of a die change process. Generally, SMED aims to standardize and simplify the operations. By this means, the need for special skilled workers is also minimized. Since then, the ways to improve and support the SMED technique are considered in the literature. The SMED technique is used as an element of Total Productivity Maintenance and “continuous improvement process” in various studies to reach lean manufacturing .Describes lean enablers which is based on the principles ofleanproduction. Incorporated into an appropriate methodology, lean enablers can be employed to design new factories or deduce measures to improve existing factories. 1.1 SMED concept Single Minute Exchange of Die (SMED) is one of the many lean production methods for reducing waste in a manufacturing process. It provides a rapid and efficientway of converting a manufacturing process from running the current product to running the next product. This rapid changeover is key to reducing production lot sizes and thereby improving flow. SMED is the term used to represent the Single Minute Exchange of Die or setup time that can be counted in a single digit of minutes. SMED is often used interchangeably with “quick changeover”. SMED and quick changeover are the practice of reducing the time it takes to change a line or machine from running one product to the next. The need for SMED and quick changeover programs is more popular now than ever due to increased demand for product variability, reduced product life cycles and theneed to significantly reduce inventories. This rapid changeover is key to reducing production lot sizes and thereby improving flow. The phrase "single minute" does not mean that all changeovers and startups should take only one minute, but that they should take less than 10 minutes (in other words, "single digit minute"). 2. FOCUS ON SMED The focus on the SMED applications for process industry plants that produce materials like paints, paper products, foods, beverages, personal care items and fiber, and apparel rather than assembled products such as refrigerators, cell phones, or automobiles. It is noted that changeover complexity should be considered in addition to the mechanical and electrical changes when changing to a different productsincethese industriesoftenneedchemistry and physics changes during the process is reaching equilibrium on the new product and specified properties. Describes the improvement of the quick changeoverprocess of a painting line in a wooden framesfactory. Theapplication presents the scheduling of the involved setup operations, considering their duration, precedence relations and resources' need, in order to achieve a reduced setup time. The main focus of the project is to reduce the lead time in a manufacturing process, by analyzing the cycle time for each of the process and identifying the critical process in the manufacturing line. Then identification of value added and non-value added activities in process and to reduce non value added activities to increase the productivity in it. To increase the productivity of the industry so that the demands are met. To reduce the wastes leading to reduced expenditure. To eliminate the bottlenecks in the production line. To increase the efficiencyoftheprocessbyreducing the non-value added activities.
2.
International Research Journal
of Engineering and Technology (IRJET) e-ISSN: 2395-0056 Volume: 06 Issue: 04 | Apr 2019 www.irjet.net p-ISSN: 2395-0072 © 2019, IRJET | Impact Factor value: 7.211 | ISO 9001:2008 Certified Journal | Page 4666 3. OBJECTIVES of SMED: Study the process flow in the production line of a manufacturing. Estimate the cycle time for each manufacturing processes. Create the current state value stream map with the cycle time. Find out the bottleneck in the current state value stream map. Identifying the value added and non-value added activities for the product. Apply lean tools to minimize non value added activities. Create the future state value stream map and compare the benefits. 4. PROCESS OF SMED 1. Observe the current methodology: Current procedures generally recorded on video tape of all the changeover process. It covers the complete changeover from one model to another model. 2. Separate the Internal and External activities: Internal activities are those that can only be performed when the process is stopped, while External activities can be done while the last batch is being produced, or once the next batch has started. 3. Stream line the process of changeover: For each iteration of the above process, a substantial improvement in set-up times shouldbeexpected,so it may take several iterations to cross the ten minute line. 4. Continuous Training: After the successful first iteration of SMED application the prime requirement becomes the training of all the operator of the cell. Training has been given by cell champion. See Figure 1. Fig. 1 Representation of change over time 5. The Five S’s The Five S’s are some rules for workplace organization which aim to organize each worker’s work area for maximum efficiency. 1. Sort – Sort what is needed and what is not needed so that the things that are frequently needed are available nearby and as easy to find as possible. Things which are less often used or not needed should be relocated or discarded. 2. Straighten – Arrange essential things in order for easy access. The objective is to minimize the amount of motion required in order for workers to do their jobs. 3. Scrub or Shine – Keep machines and work areas clean so as to eliminate problems associated with un-cleanliness. In some industries, airborne dust is among the causes of poor product surface or color contamination. To be more aware of dust, some companies paint their working places inlightcolors and use a high level of lighting. 4. Stabilize or Standardize – Make the first 3 S’s a routine practice by implementing clear procedures for sorting, straightening and scrubbing. 5. Sustain – Promote, communicate and train in the 5 S’s to ensure that it is part of the company’s corporate culture. This might include assigning a team to be responsible for supervising compliance with the 5 S’s. 6. SMED Terms Adjustment Waste: Any activitiesthatwouldcause the machine to cycle in a sample or trial mode which could create a part that must be inspected and then possible scrappedorreworded(Rubrich& Watson, 2004). Internal Setup: That part of the setup which must be done while the machine is shut down, for example, removing or attaching dies (Rubrich & Watson, 2004). External Setup: That part of thesetupwhichcanbe done while the machine is still running,for example, preparing a die to be used for the next run (Rubrich & Watson, 2004). Batch: A quantity of items that are processed together (Marchwinski & Shook, 2003). Downtime: Production time lost due to planned and unplanned stoppages. Planned downtime includes scheduled stoppages for such activities as shift start up, production meetings, changeovers to produce other products and scheduled maintenance. Unplanned downtime includes stoppages for breakdowns, machine adjustments,
3.
International Research Journal
of Engineering and Technology (IRJET) e-ISSN: 2395-0056 Volume: 06 Issue: 04 | Apr 2019 www.irjet.net p-ISSN: 2395-0072 © 2019, IRJET | Impact Factor value: 7.211 | ISO 9001:2008 Certified Journal | Page 4667 material shortages and absenteeism (Marchwinski & Shook, 2003). Changeover: The process of switching from the production of one product or part number to another in a machine or a series of linked machines by changing parts, dies, molds or fixtures, also called a set-up. Changeover time is measured as the time elapsed between the last piece in the run just completed until the first good piece from the process after the changeover (Marchwinski & Shook, 2003). Die Set: This is the tooling that is removed and replaced in a punch press during a changeover. A die set consists of a set of male punches and female dies which, when pressed together either creates a hole in the work piece or forms the work piece creating features desired by the customer. Waste: Any activity that consumes resources but creates no value for the customer (Marchwinski & Shook, 2003). Lean Production: A system of production that makes and delivers just what is needed, justwhenit is needed and just in the amount needed. Lean manufacturing aims for the total elimination of all waste to achieve the best possible quality, lowest possible cost and use of resources, and the lowest possible production and delivery lead times (Marchwinski & Shook, 2003). Value Stream Map: A diagram that defines each step of the material an information flow needed from initial order of a good or service through delivery (Marchwinski & Shook, 2003). Lot: A quantity of items that are processed together (Krajewski & Ritzman, 2007). Value Added Activities: The time spent on activities that add value to an item from the customer's perspective. These are activities that effectively change the form and function of a raw material into a good or service that the customer is willing to pay for (Marchwin ski & Shook, 2003). Non-Value Added Activities: The time spent on activities that add costs but novaluetoanitemfrom the customer's perspective. Theseareactivitiesthat the customer is generally not willing to pay for (Marchwinski & Shook, 2003). Shingo, Shigeo (1909-1990): A consultant to Toyota who made key contributions to the development of the Toyota Production System, especially quick changeovers, SMED and standardized work (Marchwinski & Shook, 2003). the target of reducing changeover times to a single digit, or less than 10 minutes (Marchwinski & Shook, 2003) Punch Press: A machine tool used to work materials (typically steel) by changing the shape of the raw material. Material shapeischangedthrough application of direct pressure which forces the material to change shape. The function of thepunch press is to hold the die set and apply the motionand pressure required to perform value added operations to raw materials. Setup Waste, Internal: Alignment activities required to remove and install tools, for example, the time associated with using a fork truck to maneuver the old tool out and the new tool in while setting up a press (Rubrich & Watson, 2004). Setup: The process of switching from the production of one product or part number to another in a machine or a series of linked machines by changing parts, dies, molds or fixtures, also called a set-up. Changeover time is measured as the time elapsed between the last piece in the run just completed until the first good piece from the process after the changeover (Marchwinski & Shook, 2003). Setup Waste, External: Activities such as searching, locating or moving jigs, tools, bolts, clamps, fasteners, gauges or instructions in the setup area (Rubrich & Watson, 2003). 7. SMED Implementation in CNC machine Fixture In CNC machine comparison between old fixture and new fixture after the implementing of SMED concept. Fig 2. CNC machine
4.
International Research Journal
of Engineering and Technology (IRJET) e-ISSN: 2395-0056 Volume: 06 Issue: 04 | Apr 2019 www.irjet.net p-ISSN: 2395-0072 © 2019, IRJET | Impact Factor value: 7.211 | ISO 9001:2008 Certified Journal | Page 4668 . Fig 3. Fixture mount on CNC machine Fig 4. Old fixture 8. APPLICATION of SMED This application aims to optimize machine utilization, enabling small lot sizes, reducingproductiontimes,reducing the time that machine does not operate. Also, shortening preparation and machine adjustment times and reducing stocks. The facility in concern manufactures Styrofoam products that are used to support mainly for refrigerators during packing and handling. The injection presses in the facility are also capable of producing other products by utilizing the dies that are designed for automotive parts and construction sites. High product variation forces the company to make changeovers frequently. 1. Analyzing setup time A video recorder was used to analyze how setup tasks are executed in the current case. Then, based on the activities, total time is analyzed. A pie chart is drawn where the percent of task times are stated in Fig. 5. Fig.5. Current percent of setup steps 2. Eliminating inefficient time Eliminating the time that may be wasted during searching required equipment’s is important. Therefore, a list of materials and equipment’s that is being used during setupis made. Also, forms are designed to enable that they are available and properly working when needed. 3. Standardization In the final step, the improvementstudieswere reported and checklists were formed. The causes for recursive activities were determined as much as possible and act plans to eliminate them were provided. Finally, the setup tasks will no longer be unpredictable time delays by use of the precise time records. Therefore, better planning activities will lead to better customersatisfaction.Theeducationandskill levels of the workers are also an important issue that needs to be considered during standardization. 9. CONCLUSION In this study, SMED methodology was applied to prepare an optimal standard procedure for changeover operations on defined machine. Ergonomics and safety issues were also taken into consideration during setups. Since an ergonomic workplace makes operations easierfortheoperators,simple however crucial changes are suggested. One of the major problems more setup time was identified and then study about the fixture design. Literature survey related to single minute exchange of dies (SMED) was carried out. Further studies in the facility may include 5S and Kaizen studies for internal setup. Alternative ways to shorten internal setups can be searched in detail. In order to eliminate adjustment steps, trial and errors should be minimized. Settings must be used forchangeoveroperations instead of adjustments. Therefore, a design of experiments study can be done to determine parameters of the machine. It should be kept in mind that successful implementation of
5.
International Research Journal
of Engineering and Technology (IRJET) e-ISSN: 2395-0056 Volume: 06 Issue: 04 | Apr 2019 www.irjet.net p-ISSN: 2395-0072 © 2019, IRJET | Impact Factor value: 7.211 | ISO 9001:2008 Certified Journal | Page 4669 new production methods requires sustainability and permanent solutions and the key of sustainability is the standardization of that optimal solution. REFERENCES 1. Berna Ulutas, “An application of SMED Methodology”, International Journal of Industrial and Manufacturing Engineering, 5, (2011), 1194- 1197. 2. Arun Abraham,Ganpathi K.N., Kailash Motwani, “Setup time reduction through SMED techniqueina stamping production line”, SASTECH journal, 11, (2012), 47-52. 3. Mukesh Desai, A.M.Rawani, “Productivity improvement of automobile industry by using SMED”, ARPN Journal of Engineering and applied science, 12, (2017), 2615-2629. 4. N.P.Maniar, D.P.Vakharia,“DesignandDevelopment of Rotary Fixture for CNC”, International Journal of Engineering a Science Invention ,1, (2012), 32-43. 5. K.M.Viramgama, R.D.Makhawana, “A Study on Design of Fixture for Valve Body for CNC Machine”, International Journal of Advance Engineering and Research Development, 1, (2014), 42-46.
Jetzt herunterladen