1.
CURRENT STATUS OF
BIO-BASED CHEMICALS
(2015)
BIOTECH SUPPORT SERVICES (BSS), INDIA
S. N. JOGDAND

2.
2
CURRENT STATUS OF BIO-BASED CHEMICALS
CONTENTS
Chapter No. Contents Page No.
1 Bio-based Chemical Industry – Strength of Bio-Economy 03
2 Worldwide Scenario of Bio-based Chemicals 34
3 Biorefinery 63
4 Biotechnological Production of 1,4 -Butanediol 88
5 Biotechnological Production of Acrylamide, Polyacrylic acid 100
6 Bio-Adipic Acid 117
7 Bio-Ethylene 127
8 Bio-Isobutanol 138
9 Bio-Isoprene, Bio-Butadiene 148
10 Bio-Succinic Acid 173
11 Biotechnological Production of Propane 1,3 –diol (PDO) 197
12 Bio-Monoethylene Glycol (Bio-MEG) 211
13 Farnesene 219
14 Epichlorohydrin 224
Summary
We have been obtaining chemicals, fuels and products largely from fossil resources. Recently
understandings of need, development of bio-processes have enabled us to make the same as
bio-based. Thus we have (i) bio-based chemicals (platform chemicals used to obtain range of
other chemicals) (ii) bio-based fuels (iii) bio-based products e.g. bio-detergents, bio-lubricants,
bio-surfactants etc. which are not further converted into anything but find applications
themselves. Many references take account of biofuels and bio-based products but the area of
bio-based chemicals (‗platform‘ or ‗Intermediate‘ chemicals) is perhaps still developing and
commercial production of them is relatively new. New generation of industrial material,
polymers, plastics and many other products in turn will be produced from bio-based chemicals.
That makes this era dominated by ‗Bioeconomy‘. So this Report discusses the development of
bio-based chemicals.
For Soft Copy of the Report write an email to
snjogdand@gmail.com or info@biotechsupportbase.com

3.
3
Chapter 1
Bio-based Chemical Industry – Strength of Bio-Economy
1.1 What is Bio-based?
1.2 Definition of Bio-based Chemicals
1.3 Historic Biobased Chemistry
1.4 Three Approaches to Bio-based Materials
1.5 Market for Bio-based Products
1.6 Drivers / Factors Affecting Introduction of Bio-based Products
1.7 Hinderances in Introduction of Bio-based Products
1.8 Environmental Benefits of Bioprocesses
1.9 Benefits of Bio-based Chemicals
1.10 Negatives of Bio-based Chemicals
1.11 Chemical Processes Vs Biotransformations
1.12 Impact of Shift to Biobased Chemicals
1.13 Classification of Industrially Produced Chemicals
1.14 Industrial biotechnology and the biobased economy
1.15 Bio-based Chemical Development
1.16 Economics and Prospects of Bio-based Products
1.17 Investments in Bio-based Chemicals and Materials Developers
1.18 Shift towards Biobased Chemicals and Products
1.19 Questions about Biobased Materials
1.20 Recent Large Projects from bio-based feedstocks
1.21 Challenges for Bio-based Chemicals Industry
1.22 Epichlorohydrin
What is Bio-based?
Bio-based materials are those which are produced using renewable resources of biological
origin and / or products produced using biological catalytic agents.
Bio-based materials encompass:
 biofuels (bio-diesel and fuel alcohol) and
 bio-based chemicals (e.g. succinic acid) obtained from processing of agricultural
products, forest biomass and municipal wastes.
 Bio-based products

4.
4
Bio-based chemicals use new carbon instead of old. In normal cycle biomass produced using
carbon dioxide over a period of more than 106
years has got converted into fossil fuels which we
are using for polymers, chemicals and fuel. Instead, in bio-based approach we are using
biomass / organics produced within months.
There are some misunderstandings about bio-based materials -
 Bio-based materials always have a lower carbon footprint
 Bio-based chemicals and polymers are a recent development
 Bio-based materials compete with food supply and consume needed resources
 Bio-based products will require lengthy development
 Consumers will accept lower performance and
 significantly higher prices for Bio-based products
Source: Tecnon OrbiChem
Definition of Bio-based Chemicals
Bio-based chemicals can be defined as ‗Platform and Intermediate chemicals‘ derived from
biomass feedstocks and used to produce other chemicals. They are base chemicals for
industrial manufacturing processes.
It is estimated that current global oil reserves will last up to 2030, as projected in 2006-2007 by
IEA. Experts predict the end of cheap fossil fuels by 2040-2050. Chemical industries are already
witnessing it and are combating with costly oil and natural gas. More than 85 per cent of the
chemicals we use today come from fossil-based feedstocks like oil and gas. However, there is
growing demand for biobased chemicals. The range of applications for these bio-based
chemicals also continues to expand and these sustainable alternatives to fossil-based
chemicals are now being used to manufacture a new generation of bio-based plastics,
lubricants, paints, cosmetics, pharmaceuticals and other products; in fact, almost all industrial
materials made from fossil resources could be substituted by bio-based counterparts.
Current global bio-based chemical and polymer production is estimated to be around 50 million
tonnes with a market worth of $3.6 billion, but the industry is growing rapidly. Key sectors like
bioplastics are showing annual growth rates in excess of 10 per cent and by 2021, the market
for bio-based chemicals and polymers is predicted to more than triple in value to around $12.2
billion.
The World Wide Fund for Nature reports that by 2030 the use of bio-based chemicals could
prevent 660 million tonnes of carbon dioxide reaching the atmosphere each year.

5.
5
In 1950s US Chemical industry was leading in the world and was responsible for over 5 million
U.S. jobs and a $20 billion positive trade balance for the United States. However, over the last
two decades, competitive advantage for chemicals and plastics manufacturing has shifted
towards the Middle East and Asia, as has the industry. U.S. employment in the sector has
dropped over the last decade and is projected to shrink further as capital investment for the
petroleum-based industry has essentially shifted away from the United States. Biobased
chemicals and plastics then had an historic opportunity to reverse these trends by creation of
new generation of renewable and sustainable products in United States.
Biobased chemicals and plastics — often referred to as biobased products — are virtually the
same as their petroleum-based counterparts, but are manufactured from renewable resources.
Recent advances in biotechnology are now making it possible to manufacture many traditional
chemicals — and many promising new alternatives — from renewable biomass instead of
petroleum.
Historic Biobased Chemistry
Biobased chemical technology is seeing resurgence today but it is by no means new. In
fermentation era acetone, butanol, acetic acid etc were produced by fermentation while some
other bio-based processes / products had made the beginning.
 Prior to World War II, furfural, furan and tetrahydrofuran were obtained from
cellulosic materials (corn cobs).
 Butanol was produced by acetone/butanol/ethanol fermentation using carbohydrate
subtrates.
 Acetic acid was produced from fermentation of alcohol (which was produced from
sugar).
 Glycerol was dehydrated to allyl alcohol and acrolein, the precursor for acrylic acid, as
early as the 1880s.
 Hydrogenolysis of carbohydrates to produce, 1,2-propylene glycol, ethylene glycol and
glycerol, was reported in 1933.
 Ethanol dehydration to ethylene was documented as early as 1932.
 Rayon, the first synthetic fabric, and celluloid, the earliest form of film stock, are
partially derived from bio-based sources.
 Whale oil was used as a lamp oil and lubricant before being displaced by
petroleum.

6.
6
The reasons these biobased technologies were not successfully commercialized then (or why
petrochemical feedstocks dominated chemical industry) and now shift to bio-based are obvious.
These are –
1. During the time period of these early developments, between 1920 and 1969, the price
of petroleum never exceeded $3.10 per barrel, and it was in abundant supply relative to
other feedstocks.
2. Agricultural productivity increased without increase in inputs between 1949 and 2006.
3. Heightened consumer concerns about sustainability.
4. Surprising Innovations in feedstocks and processes to produce bio-based
chemicals.
5. Long-term potential of bio- routes to be cost competitive is seen.
The application of bioconversion processes has been generally restricted to the
production of fine chemicals which are difficult to make by chemical syntheses.
In 1979, a novel production process for propene oxide, the 'Cetus Process' was
proposed. Thus, for the first time, an enzymatic process was incorporated into a
petrochemical process for production of a bulk chemical. In this process, propene
halohydrin is synthesized from propene using Caldariornycesfurnago chloroperoxidase in
the presence of hydrogen peroxide. Halohydrin is further converted to propene oxide by
Flavobucterfurn halohydrin epoxidase. Hydrogen peroxide can be supplied through the
oxidation reaction of glucose by glucose-2-oxidase. The arabino-2-hexosulose formed is
chemically reduced to D- fructose
Next, in 1985, the enzymatic production of acrylamide, a typical commodity chemical, was
started on an industrial scale, making microbial transformations in the industrial
production of commodity chemicals a rapidly developing fleld. Nitto Chemical Industry
started commercial production of acrylamide by enzymatic hydration of acrylonitrile in 1985.
Initially in 1990s interest was in biofuels (biodiesel) but it shifted fast to bio-based
chemicals (due to the increased value of chemicals relative to fuels). Sustainability
concerns and price premium were the reasons again.
Due to efficient atom economy carbohydrates are suitable for low-cost production of ethanol, n-
and iso-butanol, poly(hydroxyalkanoates), lactic acid, 3-hydroxypropionic acid, diacids such
as succinic, fumaric and adipic, diols such as 1,4-butanedioland 1,3-propanediol, isoprene,
farnesene and other olefins from alcohol dehydration,ethylene, propylene and butadiene.
Carbohydrates are also being chemically transformed to chemicals such as dextrose and

7.
7
xylose, and their hydrogenated counterparts, sorbitol and xylitol, isosorbide, glucaric acid,
levulinic acid, ethylene and propylene glycol, furfural, hydroxymethylfurfural, furandicarboxylic
acid, p-xylene and terephthalic acid, and glycerol derivatives including acrolein, acrylic
acid and epichlorohydrin. Most of these chemicals are building blocks. Some are good
candidates for platform molecules and high volume commodities.
Bio-based polyethylene (PE) and Epichlorohydrin (ECH) are expected to show 10 fold growth in
market through the decade.
Use of knowledge of molecular biology and impact of genomics and bioinformatics has made it
possible to accelerate the efforts of metabolic pathway engineering and to produce desired
chemicals commercially.
95% of all chemicals and plastics are produced from non-renewable energy sources, like natural
gas, crude oil and coal. Recently there is growing interest in alternative routes to ‗green‘
chemicals.
It is expected that bioderived chemicals will come from three sources:
(i) Direct production using conventional thermochemical and catalytic process - Direct
production is already a reality, as evidenced by the production of propane diol and
polylactic acid from corn-derived glucose and others. There has been recent
commercialization of bio-derived plasticizers for polyvinyl chloride, polyester resins
for coatings and inks, biopolyols for urethane foams and others based on vegetable
oil and carbohydrate renewable sources.
(ii) Biorefining - Chemical biorefineries, on the other hand, based on various platforms
such as carbohydrate/ cellulose, oil, and glycerin, a co-product of biodiesel
production, and algae are in the pilot stage.
(iii) Expression in plants. Chemicals expressed in genetically enhanced plants to
accentuate target functionalities such as primary hydroxyls, oxirane and others are in
the discovery phase and still away from commercialization.
Enabling technology for this be Industrial Biotechnology in the first place and Synthetic Biology
adding to its efficiency.
Three Approaches to Bio-based Materials
1. Build on Naturally Occurring Materials
• Rayon fibre, Cellophane film – from wood pulp, done for over 100 years. Using eucalyptus
trees, the yield per hectare is 10 times that of cotton
• Glycerin and fatty acids – from vegetable oils

8.
8
• Polylactic acid (PLA) resins from lactic acid
• Cellulose acetate, nitrate – from cellulose
2. Develop Bio-Based Routes to Existing Intermediates
• Bio-based processes to make MEG, paraxylene, adipic acid, butadiene, caprolactam etc. are
being developed; they are in varying stages of advancement - ‗drop in‘ chemicals
3. Develop New Polymers/Fibres
• Completely new bio-based polymer products that demonstrate similar or improved properties
compared to existing commercial oil-base products.
Market for Bio-based Products
The market value for biobased chemicals was estimated to be between $130 billion and $180
billion in 2010, and is projected to grow up to 9 percent annually.
By 2025, the global market value is projected to reach $483 to $614 billion across a broad range
of chemicals as detailed by the USDA. This represents more than 20% share of global chemical
industry.
In 2007-2017, while chemicals‘ market is projected to grow 60%, bio-based chemicals‘ market
will grow at 600%.
The market potential for microbes and microbial products has been estimated by BCC Research
market forcasting firm in 2011. The global market value for microbial products in bulk chemical
production is about $156 billion in 2011and will be $259 billion in 2016 with annual growth rate
of 10.7%.
The market for bio-based chemicals is comparatively small, 50–75 Bn EUR or 3–4% of global
chemical industry sales. Future growth is strongly determined by a number of high-uncertainty
developments including technology breakthroughs and government policy.
Bio-based chemicals sales will continue to grow and outpace general chemical industry growth.
The dedicated production of chemicals through biocatalysis and fermentation is expected to
exhibit strong growth in all scenarios. However, a wholesale transformation of the industry is not
expected, with bio-based chemicals constituting another option in the chemical industry toolkit,
causing a more or less gradual shift from a petroleum-based industry towards one with
additional feedstock options.
According to Germany‘s Nova Institute market study, production capacity of bio-based polymers
will triple from 3.5 million tones in 2011 to nearly 12 million tonnes in 2020. Bio-based drop-in
PET and PE/PP polymers and the new polymers PLA and PHA show the fastest rates of market
growth. Europe‘s share will decrease from 20% to 14% and North America‘s share from 15% to

9.
9
13%, whereas Asia‘s will increase from 52% to 55% and South America‘s from 13% to 18%.
Major capital investment is expected to take place in Asia and South America.
Drivers / Factors Affecting Introduction of Bio-based Products
The fossil resources are finite in stock but the demand for them is continuously increasing. 80%
of available raw materials and energy are consumed by affluent 20% in the developed world.
Also India and China who have huge human population and rapid economic growth have
growing demand for energy and material resources. These are the main driving forces in search
for bio-based energy and materials. The global markets for Biobased products are expected to
grow rapidly over the next few years. Biobased materials are displacing the petrochemical
based materials. Drivers may differ from region to region and country to country depending on
issues like their strengths, weaknesses, choices and compulsions.
Main drivers for bio-based products are –
1. society's need to reduce its dependence on fossil-based products,
2. the rapid demographic growth of developing countries with their increased fuel demand,
and
3. the growing global concern for the future sustainability of our environment.
4. Demand for safer materials that are regulatory compliant,
5. Unfavorable petroleum price dynamics,
6. Materials shortages resulting from shifts in the chemical manufacturing industry, and
7. Increasing consumer demand for green products (environmental considerations).
8. Voluntary corporate environmental initiatives
9. GreenHouse Gas (GHG) emission Regulations
10. Changing consumer behavior with respect to purchasing decisions which have ethical,
moral considerations
11. Availability of cost effective technology to produce bio-based products
12. Availability of novel functional building blocks and improved processes
Traditionally biobased chemicals are used in niche applications such as personal care and food
additives. New applications of biobased chemicals are emerging which are – bio-surfactants,
bio-lubricants, bio-polymers. Respective chemical companies are now diversifying their products
based on use of bio-based chemicals. The advantage of this to company is that it can
significantly lower their portfolio risk and their carbon footprint.

10.
10
Hinderances in Introduction of Bio-based Products
Key factors hindering successful introduction of chemicals and plastics from agricultural
feedstock are:
1. Cost of production in comparison to petroleum based processes
2. Product functionality limitation,
3. Size.
4. Investment required for infrastructure and distribution
5. No incentive for adopting of bio-route
6. Downstream users of chemicals reluctant to change supply chain if bio route products
are little costlier
Environmental Benefits of Bioprocesses
 The shift to bioprocessing for production of vitamin B2 resulted in a 40% cost reduction
and only 5% of the previous level of waste.
 A similar change to a biological production process for antibiotics combined the original
ten-stage process into a single step, giving a 65% reduction in waste, using 50% less
energy and halving the cost.
 Use of enzymes for textile processing reduced energy needs by 25% and gave 60% less
effluent.
 Production of bioplastics derived from cornstarch reduced the inputs of fossil fuels by 17-
55% compared to the conventional alternatives.
 The use of biofuels and conversion of chemical processes to use agricultural feedstocks
gives significant reductions in net carbon emissions.
Benefits of Bio-based Chemicals
 For both companies and consumers there are new and different functionalities of bio-
based chemicals.
 They can offer innovative and better products,
 Reduce environmental impacts,
 IB advocates lower net carbon emissions (since growing the feedstock would subtract
carbon dioxide from the atmosphere)
 On the political-economic side, a bio-economy would rely less on oil imports from parts
of the world deemed less stable.

11.
11
Negatives of Bio-based Chemicals
But there are critics too, who state that the expectations are exaggerated.
 IB remains of little importance for chemical production overall, especially where IB
products are more expensive than alternatives,
 Industry should not exploit valuable farmland that can be used to grow food and feed
 The petrochemical industry is not a key contributor to climate change; of all crude oil that
is produced, only about 5 per cent is used by the petrochemical industry. It does so very
efficiently, converting it into useful products first and eventually into energy when it is
burned in incinerators, thus providing double use.
Chemical Processes Vs Biotransformations
Sr. No. Chemical Processes Biotransformations
1 Productivity is low. High productivity
2 Chemical catalyst Repeated use of biocatalyst
3
Relatively harsh / hazardous reaction
conditions
Carried out in mild reaction conditions
4 Energy intensive Less energy required for biocatalysis
5 Reactions not specific
Highly specific reactions with respect to
structure and stereo chemistry
6
Generally highly pure substrate required
to get pure product of specific chemistry
Biocatalyst is highly specific so substrate
need not be of high purity
7 More environmental pollution Less environmental pollution
8 Conservation of resources
9
So far generally used for synthesis of ‗fine
chemicals‘ but now applications for
‗commodity chemicals‘ synthesis is
growing.
Impact of Shift to Biobased Chemicals
World Market penetration expected from biobased products is as follows –
Chemical Industry Sector 2010 2025
Commodity Chemicals 1-2% 6-10%
Specialty Chemicals 20-25% 45-50%
Fine Chemicals 20-25% 45-50%
Polymers 5-10% 10-20%
Source: USDA, U.S. Biobased Products Market Potential and Projections Through 2025
Biobased American chemical industry employed 5700 Americans at 159 facilities in 2007. Every
new job in the chemical industry creates 5.5 additional jobs elsewhere in the economy. Recent
bio-refinery openings are likely to be responsible for 40,000 jobs. Less than 4% of U.S chemical

12.
12
sales are bio-based, recent USDA analysis puts the potential market share in excess of 20% by
2025 with adequate Federal policy support. This growth could save tens of thousands of
additional jobs in the next five years. US is well positioned to capture share in biobased
chemicals market due to its leading biotechnology status, strong agricultural sector with largest
arable land, and good downstream infrastructure (warehouses, manufacturing etc.).
The growth trend of industrial biotechnology is forcasted at 15-20% per year for 2010-
2020.
Classification of Industrially Produced Chemicals
Chemical industry is large. The world‘s chemicals production in 2002 was in excess of 1.3
trillion. This industry consists of four major subsectors: basic chemicals, specialty chemicals,
consumer care products, and life science products. Biotechnology impacts all these sectors, but
to different degrees. Demarcation between sectors is not distinct.
No.
Category of
Chemical
Features Examples
1
Bulk Chemical
(Commodity
Chemicals)
Single pure chemical substance. Produced in
specialized plant.
High volume / low price chemicals. Account for
95% of total chemicals produced. High volume
production.
Used in processing applications (e.g. pulp and
paper, oil refining, metals recovery) and
Used as raw materials for producing other basic
chemicals, specialty chemicals, and consumer
products, including manufactured goods
(textiles,automobiles, etc.)
2
Specialty
Chemical
These are generally mixtures.
Derived from basic chemicals but are more
technologically
advanced and used in lesser volumes than the
basic chemicals. Specialty chemicals have a
higher value-added component because they are
not easily duplicated by other producers or are
protected from competition by patents.
These chemicals are sold on performance. – on
What they can do?
Adhesives and sealants,
catalysts, coatings, and
plastic additives.
3
Consumer care
products
Products in this category are high-tech in nature
and developing them demands expensive
research.
Soaps, detergents,
bleaches, laundry aids,
hair care products, skin
care products, fragrances,
etc.,
4
Life science
products
Pharmaceuticals, products of crop protection and
products of modern biotechnology
5 Fine Chemicals
Single pure chemical substance. Produced in
multi-purpose plant. Low volume / high price
6-aminopenicillanic acid
Flavours, fragrance, tobacco,

13.
13
chemicals.
Few applications.
Sold on specifications – what they are?
Starting materials for specialty chemicals
(pharmaceuticals, biopharmaceuticals,
agrochemicals)
Global production value - $85 billion
foundry, agrochemical
and pharmaceutical and other
Industrial applications.
Commodity chemicals are characterized by relatively high raw material costs as compared to to
the cost of production. In contrast to fine chemicals, the commodity chemicals are inexpensive,
have larger demand and are produced and sold in bulk quantity. Most of the commodity
chemicals are intermediates for further synthesis.
Bulk Chemicals Fine Chemicals
1
Produced in large quantities
using standardised procedures
in continuous set-ups
High quality chemicals often made in
batch, multipurpose equipment
2 Annual Production >10ktonnes Annual Production <10ktonnes
3 Price Levels 800-2500 Euro/tonne Price Levels >3000 Euro/tonne
4
Examples of Petrochemical products –
Ethylene, Propylene, Aromatics
Flavours, fragrance, tobacco, foundry,
agrochemical and pharmaceutical and
other industrial applications
Industrial biotechnology and the biobased economy
According to a report from Smithers Rapra (www.rapra.net or www.smithersrapra.com),
Industrial Biotechnology is currently worth €23 billion representing just 6% in sales of the overall
worldwide chemicals market. However, it is significantly out-performing the overall chemicals
market at an impressive 20% annual growth rate and has the potential to become the dominant
technology of tomorrow's chemicals industry and estimates from different sources consider that:
 The global revenue potential of the entire biomass value chain for biorefineries could exceed €
200 billion by 2020 (WEF (2010) The future of Industrial Biorefineries)
 The share of bio-based processes in all chemical production is likely to increase from less than
2% in 2005 to 25% in 2025 (OECD (2009) The bioeconomy to 2030: Designing a Policy Agenda
), and could reach 30% in Europe by 2030 (>50% for high added value chemicals and polymers,
less than 10% of bulk commodity chemicals) (Star-COLIBRI (2011) Joint European Biorefinery
Vision for 2030)
 Up to 75 billion litres of bioethanol could be sustainably produced at a competitive cost by 2020,
which would represent about €15 billion in additional revenue for the agricultural sector;
(Bloomberg New Energy Finance (2010) Next-generation ethanol and biochemicals: What's in it
for Europe)

14.
14
 The same report predicts development for 2nd generation bioethanol in the EU by 2020 could
lead to almost 950 biorefineries generating more than € 32 billion in annual revenue and 933
000 jobs (total man years from 2010 to 2020).
Therefore, the biobased economy represents a huge future opportunity, and, in Europe, by 2020
it is estimated that the biobased chemicals market will be worth €40 billion and will have
generated 90,000 jobs within the bio-chemical industry alone.
Delivering on this opportunity will require significant investment, innovation and value chain
development and most importantly new collaborations across the sector. Important challenges
will be posed by high energy prices, the impact of the shale gas boom on the development of
biobased chemicals markets and the ongoing need for predictable, coherent and supportive
policy in the EU.
In order to economically and technically compete with petroleum based products it is essential
to develop robust microorganisms and efficient processing techniques that are capable of
producing biochemicals with high performance and low production cost. Strategies of
developing microbial strains using metabolic engineering have been successfully applied to
industrial production of several value-added chemicals.
The market for microbes and microbial products is forcasted by BCC research in 2011. The
global market for microbial products in bulk chemicals production is $156 billion in 2011 and will
reach $259 billion in 2016 with annual growth rate of 10.7%. Market for microbes is $4.9 billion
in 2011 and will be $6.8 billion in 2016.
Bio-based Chemical Development
Biobased chemicals are expected to gain 1.5m tonnes production each year upto 2015, from its
base figure of 500,000 tonnes per year. By 2015, biobased chemicals capacity will be 6m
tonnes per year out of total 400m tonnes of chemicals conventionally produced per year.
In 1990s, renewable technology innovators focused on creating biofuels − primarily ethanol and
biodiesel.
Then in next decade, interest shifted towards bio-based chemicals production. Sustainability,
affordable feedstock and price premium were the drivers.
Share of biotechnological processes in production of chemicals was 3% in 2004, but is expected
to reach upto 15% by 2015. Many bulk chemicals like lactic acid, 1,3-propanediol, succinic acid
and 1,4-butanediol, etc. can be produced by fermentation using microorganisms. In late 2006
and early 2007, US-based Dow Chemical and Belgium-based Solvay began the process of

15.
15
converting their traditional epichlorohydrin (ECH) production processes into ones that use bio-
based glycerol as feedstock. Now they have begun large-scale production.
Major chemical companies and consumer product firms are committed to the development and
use of bio-based chemicals. Chemical companies such as DuPont, BASF and DSM are rolling
out visible corporate strategies with clear messaging around intent to develop bio-based
chemicals. Others that are not as vocal are also clearly interested.
Consumer momentum also continues to grow in areas such as bottles, apparel and packaging.
Genomatica is currently focused on two product platforms – biobutanediol (bio-BDO) and
biobutadiene (bio-BD), but continues its interests in other intermediates as well. Germany-based
BASF agreed to license Genomatica's technology to build a bio-based BDO plant with a
capacity of around 50,000 tonnes / year at a site yet to be determined. Genomatica also has an
agreement with Italy-based Novamont to retrofit a plant in Italy to produce bio-BDO. The plant
will have a capacity of 20,000 tonnes / year. Genomatica has also made announcements with
Japan-based Toray, Germany-based LANXESS and Taiwanbased Far Eastern New Century
demonstrating the use of its bioBDO for use in polymer resins and fibre applications. In bio-BD,
Genomatica has a venture with Italy-based Versalis to jointly develop and license bioBD
technology.
Biofuels
In the case of biofuels, global production is projected to reach about 135 billion litres by 2020.
Brazil is the world's leading producer and primary user of fuel ethanol, and has been for over 25
years. It accounts for slightly less than half the world's total production, with the US coming in
second place. With regard to biodiesel, the European Union is currently the world's leading
producer: biodiesel production in the region reached 10,187 million liters in 2009, constituting
55-60 percent of world production.
One key objective for the world's growing number of biorefineries is to enhance the overall
profitability and competitiveness of biofuels. This can be achieved by optimizing their production
and driving efficiency. The production path of a bio-based material encompasses the handling
and processing of biomass, its fermentation, chemical processing, final recovery, storage and
transportation.
The production of biofuels is becoming increasingly important for Europe for sustainable future.
Rotterdam in Holland is the leader in Europe in facilitating the biobased industry and enabling it
to utilize the advantages of the existing (petro-) chemical cluster.

16.
16
Economics and Prospects of Bio-based Products
No. Shale Gas (SynGas) source Biomass Feedstack source
1 dispersed over vast areas dispersed over vast areas
2 face logistics challenges face logistics challenges
3 require highly capital intensive processing require highly capital intensive processing
4
Provide opportunity to reduce oil
dependence
Provide opportunity to reduce oil dependence
5 Reduces CO2 emissions Reduces CO2 emissions
6
Development of chemicals by large
companies which plan for decades in
advance
Development of chemicals by large
companies which plan for decades in
advance
If shale gas is used as competitively priced feedstock for certain chemicals it gives opportunity
for biomass feedstock in other areas. Shale gas will have positive impact on bio-based
chemicals like n-butanol, Isobutanol, paraxylene, Adipic acid, Butadiene, Isoprene, 2,5 -
Furandicarboxylic acid, Farnesene while it will have negative impact on ethylene, propylene,
Monoethylene glycol.
Bio-based chemical investments are driven by raw material availability, price and cost of
production, but other factors such as political and financial support play an important role when
the first large-scale facility is decided. China, Brazil, Thailand and the US are clear winners in
the game. Europe has less bio-based chemicals‘ plants though they have many pilot plants.
One of the important factors affecting development of bio-based commodity chemicals is market
pull. Global brand owners such as US-based Coca-Cola and France-based Danone and leading
retailers such as UK-based Marks & Spencer and France-based Carrefour are large end-users
in the commodity chemicals value chain. They all have dedicated programs pursuing
environmental sustainability throughout the supply chain. In the case of MEG, Japan-based
Toyota Tsusho has taken a different approach. The bio-based value chain is in fact one step
longer than the conventional route, but it offers Toyota full control of the value chain from
plantations to end-use applications.
Large chemical and consumer brand giants who ultimately decide which bio-based chemicals
are the first to break ground.
All top 20 chemical companies have announced being active in either biofuels or bio-based
chemicals.
The change in the value chain has called for unconventional partnership networks. Agricultural
giants such as US-based firms Cargill, ADM and Bunge have all entered the bio-based chemical
business through joint ventures.

17.
17
Shale Gas and Biomass feedstock share many features with Coal to olefin as source except
CO2 emissions. According to the US Energy Information Administration (EIA) and the Food and
Agriculture Organization of the United Nations (FAO), the US has the second largest technically
recoverable shale gas reserves identified in the world. China holds 13% of global coal reserves,
and Brazil accounts for 40% of global sugarcane production. Impact of coal as source on the
global commodity chemicals market has been limited to China.
Investment in both shale gas-based and bio-based commodity chemicals is just taking off.
Recent investment history shows that global regions are quite differently positioned.
North America has significant activity in shale gas whereas Australia is only initiating activities,
and in Europe the debate is only starting. Even small reserves on a global scale can have major
local effects. European shale gas investments have faced strong resistance from both
policymakers and environmental lobbyists. In an EIA study of technically recoverable shale gas
in 32 countries, the UK represented only 0.3% of the total resources.
The global demand for biodiesel is expected to top 10 billion gallons per year by 2015. Currently
30 countries have implemented biofuel targets and are blending biodiesel with regular fuel.
Europe is moving towards 7 percent mix, while Brazil and Indonesia are targeting 10 percent.
The developing countries supply 50 percent of the global demand for biofuels, and their
commitment to renewable fuel long term is demonstrated by the fact that already 17 percent of
the world's biodiesel demand is concentrated in the South. The European Union is the largest
consumer of biodiesel with 44 percent of demand, closely followed by Asia-Pacific Region with
39 percent, well ahead of the United States.
Investments in Bio-based Chemicals and Materials Developers
Capitalists (VCs) invested $3.1 billion in bio-based chemicals and materials developers since
2004. As many of those start-ups reach megaton scales and launch IPOs, Lux Research
analysts sought to find which technologies venture investors favored. Analysts tracked 177
venture transactions involving 79 companies operating in five technology categories –
biocomposites, bioprocessing, thermochemical processes, crop modification, and algae. In
short, they found:
Bioprocessing developers infused up $1.89 billion in 96 deals. Bioprocessing developers –
especially synthetic biology companies – landed more than half the total venture capital
invested since 2004. Encompassing technologies like fermentation, phage display, natural
breeding and synthetic biology, all bioprocessing platforms employ some sort of organism as a
―factory‖ for creating products as diverse as sweeteners and catalyst supports. These platforms

18.
18
enable the likes of Amyris, Codexis, LS9, and Solazyme to produce multiple products from
multiple feedstocks, thus ensuring a relatively low-cost route to high-value compounds and
providing a hedge against feedstock and product price volatility.
Algae developers saw $190.5 million in 13 deals. This only encompasses start-ups
developing algae strains, cultivation systems, and processing equipment for creating industrial
chemicals. Representative developers include Bio Architecture Lab, a macroalgae developer,
and Israel‘s Rosetta Green, which had raised $1.5 million in venture funds, but more recently
brought in almost $6 million in an IPO on the Tel Aviv TASE. It excluded, companies primarily
developing fuels, and companies like Solazyme and Green Pacific Biologicals that use algae for
fermentation (and, thus, are categorized in bioprocessing, above).
Biocomposites developers brought in $108.9 million in a mere nine transactions. This
category includes bioplastic blends, some starch plastics, and bio-based foams, from the likes
of Cereplast, EcoSynthetix, Ecovative Design, and Entropy Resins. Because of the relatively
simple nature of these technologies, VCs often don‘t see them as investment opportunities –
forcing companies like SoyWorks and Biop Biopolymer to find other sources of funding.
Industry giants Coca-Cola, Ford Motor, Heinz, Nike, and Proctor & Gamble formed a
partnership agreement designed to integrate 100% plant-based polyethylene terepthalate
(PET) into their product lines at commercial scale. Coca-Cola will partner with Virent, Gevo,
and Avantium to accelerate development of their current 30% plant-based monoethylene glycol
(MEG) PlantBottle. To date, purely bio-based PET technologies exist. In fact, there are many
plant-based routes to terepthalic acid (TPA), which can then be converted to PET. These
include both fermentation and catalytic processes that are currently too expensive at
commercial scale.
Coca-Cola’s goal is to convert all petroleum-based PET products to plant-based
PET, which represents 52% of the total packaging within the company. Heinz licensed the MEG
PlantBottle technology from Coca-Cola, and hopes to achieve similar goals. Furthermore, Ford
shifted from using petroleum-based PET to currently use 25% soy-based polyols for seat
cushions, recycled resins for underbody systems, post-industrial recycled yarns for seat fabrics,
and repurposed nylon to make cylinder head covers in its bio-based portfolio. Considered a
drop-in solution, bio-based PET replicates the mechanical and chemical properties of
petroleum-based PET. Therefore, the 100% plant-based PET can potentially be used for all of
these end products.
This consortium acts as a catalyst to grow the bio-based PET industry to produce plastic
bottles, clothing, shoes, automotive carpets, and other furnishings, and essentially any product

19.
19
made from traditional PET. These industries will inevitably commercialize the technology due to
their current R&D partnerships, access to suppliers, collaborations with universities, and
extensive monetary resources. Furthermore, this will enhance the strength of the bio-based
materials and chemicals industry by promoting collaboration along the entire supply
chain, especially as the rate of forged partnerships is expected to slow in 2012.
In Brazil, Coca-Cola contracted JBF Industries to produce ethylene glycol in Araraquara,
Sao Paulo, for partially bio-based PlantBottle PET. JBF will build a new plant starting at the
end of 2012 and will produce 500,000 metric tons/year; it will take two years to complete.
But aside from the feedstock and materials developments, Brazilian national development bank,
BNDES, and research-financing agency, Finep, have earmarked $988 million for bio-based
chemicals and biofuels investment to be placed in 2012 ($148 million), 2013 ($345 million), and
2014 ($493 million). They emphasize only ―several projects‖ will be pursued. Dow Chemical,
Braskem, and DuPont each passed the initial selection phase for their proposals to build
projects collectively worth more than $1.5 billion. DSM has already been approved to receive
funding for succinic acid from sugarcane. Previously, the two organizations contributed $493
million to research on cellulosic ethanol production, gasification, and other value-added
derivatives of sugarcane.
Brazil‘s sugarcane continues to put it on the map of bio-based chemicals and biofuels
production hotspots. Brazilian government support for sugarcane production and downstream
conversion activities is strong, and the Brazilian bio-chemical industry has a reputation for
translating technology into commercial successes well.
Also existing polymers can become “bio” by using bio-based monomers or
intermediates.
Sr. No. Polymer Billion USD Bio- Route
1 Polyurethane ~27 Soy-based Polyols
2 Unsaturated Polyster Resins ~13 Maleic anhydride from succinic acid
3 Nylon6 ~13 Caprolactam from fermentation
4 ABS ~11 Butadiene from succinic acid
5 Polyacrylamide ~07 Acrylonitrile from 3HP
6 Polybutadiene ~06
Adipic acid from fermented succinic
acid
7 Acrylic fibers ~05 Acrylamide from 3HP
8 Nylon 6.6 ~05 Butadiene from succinic acid
9 Polyethylene Bio-ethylene

20.
20
Bio-based Chemicals
No. Chemical Routes Players
1 Acrylic Acid Fermentation, Glycerine to
Acrolein
OPXBio, Dow, Nippon Shokubai,
Arkema, BASF, Cargill, Novazymes
2 Alpha Olefins Metathesis Elevance
3 Ethylene, EO,
EG
Ethanol Dehydration Braskem, India Glycols, Greencol
Taiwan (Toyota Tsusho)
4 Isoprene Fermentation Amryis, Michelin, Goodyear, Genencor
5 Butadiene Fermentation, Conversion
of bioBDO
Genomatica, Global Bioenergies,
BASF, Invista
6 Isobutylene Fermentation, Isobutanol
Dehydration
Global Bioenergies, Gevo, Lanxess
7 BTX APR, Pyrolysis Virent, Anellotech, Cool Planet
8 Propylene
Glycol
Glycerine
Conversion
ADM, Cargill, Huntsman, Ashland
9 PX Fermentation, Catalysis Gevo, Micromidas
10 BDO Fermentation, Succinic Acid
Hydrogenation
Genomatica, Lanzatech, BioAmber
11 PDO Fermentation Dupont, Tate & Lyle
12 Butanols Fermentation Gevo, Butamax, Green Biologics,
Cobalt, Butalco
13 Succinic Acid Fermentation BioAmber, Reverdia, PTT, Mitsubishi
14 Adipic Acid Fermentation, Glucose
Catalysis
Verdezyne, Rennovia
15 ECH Glycerine Conversion Dow, Solvay
16 Ammonia Biomass Gasification BioNitrogen, Syngest
17 Methanol/DME Glycerine Gasification,
Biogas
Conversion
BioMCN, Oberon
18 Lactic Acid Fermentation Nature Works, BASF, Purac, Cargill
19 Polycarbonate Isosorbide Based Mitsubishi Chemical
Bio-Processes for Chemicals
No. Product Process
1
Bio- 1,4 –Butanediol
(BDO)
Sucrose to BDO by genetically engineered E.coli. Genomatica has
developed the technology
2
Bio- Acrylamide,
Polyacrylic acid
Acrylic acid, the monomer for PAA, can be produced by means of various
processes:
1. Fermentation of sugars to 3-HPA (3-hydroxypropionic acid),
followed by dehydration into acrylic acid
2. Catalytic dehydration of lactic acid
3. Conversion of glycerol (via acrolein) to acrylic acid
4. Oxidation of biobased propylene
3 Bio-Adipic Acid
Verdezyne‘s novel combinatorial approach to pathway engineering rapidly
creates and harnesses genetic diversity to optimize a metabolic pathway.
Rather than manipulating one pathway gene at a time, the company uses
synthetic gene libraries to introduce diversity into a metabolic pathway.
The company‘s unique computational and synthetic biology toolbox allows

21.
21
effective design, synthesis and expression of synthesized genes in a
heterologous recombinant yeast microorganism.
4 Bio-Ethylene Braskem - Sugar to bio-ethanol to bio-ethylene.
5 Bio-Isobutanol
Genetically engineered Yeast to produce Isobutanol instead of ethanol.
Gevo has developed the technology
6
Bio-Isoprene,
Bio-Butadiene
Genetically modified E. coli to produce an isoprene synthase enzyme,
and ferments bioisoprene from a variety of biomass feedstocks. Bio-
isoprene is harvested in gas phase (at low temperature). Carbohydrates
are stripped of oxygens, leading to a 3,3-dimethylallyl pyrophosphate
(a/k/a/ DMAPP). Thence, the enzyme isoprene synthase catalyzes the
production of BioIsoprene. Genencor has developed the technology.
Genetically engineered E.coli to convert glycerine or low-grade free fatty
acids into acetone, technical-grade ethanol and bioisoprene.
High-yields of isoprene from low-cost feedstocks such as crude glycerol
are obtained. GlycosBio has developed the technology
Fermentation process to convert CO (carbon monoxide) to ethanol, and
then to 2,3-butanediol. Then to dehydrate 2,3-butanediol to 1,3-butadiene.
LanzaTech has developed technology for bio-butadiene.
7 Bio-Succinic Acid
BioAmber - Gen. Eng. E.coli converts glucose to succinic acid
Myriant - Gen. Eng. E.coli converts glucose to succinic acid
Reverdia - Saccharomyces cerevisiae converts glucose to succinic acid
BASF/Purac - B. succiniciproducens converts glycerol to succinic acid
8
Bio-Propane 1,3 –diol
(PDO)
Genetically modified Escherichia coli, which ferments the glucose into
PDO.
Biosynthetic genes from Klebsiella pneumoniae and Saccharomyces
cerevisiae are transferred to production strain. DuPont Tate & Lyle
BioProducts has developed this process
9
Bio-Monoethylene
Glycol (Bio-MEG)
Canesugar to bio-ethanol to bio-ethylene to Bio-MEG. Greencol Taiwan
Corp, a joint venture between Taiwan‘s China Man-Made Fiber Corp
(CMMFC) and Japan‘s Toyota Tsusho
10 Farnesene
Amyris has successfully integrated the enzyme xylose isomerase into its
existing Biofene producing strains of yeasts, thereby allowing for the
simultaneous fermentation of glucose and xylose to farnesene. Amyris
has developed the technology.
11
Bio-Methyl Isobutyl
Ketone (MIBK)
The process utilizes a modified microbe that converts glucose into
isovaleric acid and isocaproate.
These intermediate chemicals can then be converted to MIBK, diisobutyl
ketone or methyl isoamyl ketone. This technology for producing methyl
isobutyl ketone has been exclusively licensed to Ascenix Biotechnologies.
University of Minnesota's Office can be contacted for Technology
Commercialization.
12 Bio route to p-xylene
Examples of Recently Realized and Announced Investments in Biobased Chemicals
No. Location Company Product Capacity
1 Thailand Purac Lactic Acid 100.000
2 Thailand Purac Lactide 75.000
3 Spain Purac / BASF Succinic acid industrial
4 Louisiana Myrianth / Uhde Succinic acid 14.000*
5 France Bioamber Succinic acid 2.000*

22.
22
6 Japan Mitsubishi Succinic acid Pilot
7 France DSM / Roquette Succinic acid Pilot
8 Tennessee DuPont / Tate&Lyle 1,3-PDO 60.000*
9 Illinois ADM PG 100.000*
10 Brazil Braskem Ethene 200.000*
11 Thailand Solvay Epichlorohydrin 100.000*
12 France Roquette Isosorbide Pilot
13 Illinois ADM Isosorbide Pilot
t* Announced / under constructionpacity
The European Commission (EC) has announced the start of the Biobased Industries Public
Private Partnership (PPP), which will see €3.8 billion spent - €1 billion by the EC, the rest by
industry, via the Biobased Industries Consortium (BIC) - from 2014 to 2020, to boost market
uptake of new biobased products made in Europe. This should begin in early 2014, subject to
approval by EU Member States (MSs).
Status of Bio-based Chemicals
No. Biobased Chemical
Laboratory, Pilot,
Demonstration Unit
Commercial-Scale Production
1 Ethylene Dow Chemical/Mitsui1
Braskem: from sugarcane ethanol,
200,000 m.t./year PE; Lanxess has
capacity of 10,000 m.t./year of EPDM
rubber, Brazil
2 Ethylene glycol
Greencol Taiwan: 100,000-m.t./year
bioMEG plant, 2012 India Glycols: from
sugarcane ethanol, 175,000 m.t./year
3
Glycolic acid
(hydroxyacetic acid)
Metabolic Explorer/ Roquette
4 Acetic acid
Wacker, 500-m.t./year pilot
plant
5 Propylene
Braskem, Dow, Global
Bioenergies
Braskem, considering a 30,000–50,000-
m.t./year PP plant
6 Propylene glycol
Senergy Chemical, from
glycerin
Archer Daniels Midland, 100,000
m.t./year
7 1,3-Propanediol
Metabolic Explorer, 8,000
m.t./year
DuPont Tate & Lyle Bio Products, 45,000
m.t./year
8 1,3-Propanediol
Metabolic Explorer, 8,000
m.t./year
DuPont Tate & Lyle Bio Products, 45,000
m.t./year
9 Epichlorohydrin Dow
Solvay: 10,000-m.t./year plant, France;
100,000-m.t./year plant, Thailand; plant
announced for China, 2014, with
100,000-m.t./year capacity, Spolchemie,
15,000-m.t./year plant
10 Lactic acid
Cargill: increasing polylactic acid
capacity to over 150,000 m.t./year,
Galactic, Purac
11 Acetone
TetraVitae Bioscience: acquired
by Eastman Renewable
Cathay Industrial Biotech; Jiangsu
Lianhai Biological Technology Co.

23.
23
Materials, Nov 2011
12 Acrylic acid
Arkema: glycerin-based; BASF,
Cargill, Metabolix, Myriant, OPX
Biotechnologies/Dow:
fermentation-based; SGA
Polymers: from lactic acid
13
3-Hydroxy acrylic
acid
BASF/Cargill/Novozymes jv,
kilogram scale
14 Isobutene
Gevo/Lanxess; Global
Bioenergies
Lanxess has 10,000 m.t./year of
biobased EPDM rubber, Brazil
15 Butadiene
Global Bioenergies;
Genomatica
16 Succinic acid
BASF/Purac jv (Purac belongs
to CSM, now Corbion),
BioAmber, Myriant, and
Reverdia (DSM, Roquette
Freres jv)
BASF/Purac, Succinity: Barcelona plant,
10,000 m.t./year, late 2013; plans for a
50,000-m.t./year plant, BioAmber:
350,000-liter fermenter; demo plant,
2,000 m.t. in France; building a 30,000-
m.t./year plant, Sarnia, ON (due 2014),
with plans to add 20,000 m.t./year;
planning plant in Thailand with capacity
about 100,000 m.t./year BDO and
biosuccinic acid; Reverdia: Dec 2012,
10,000 m.t./y commercial plant
17 1,4-Butanediol
BioAmber,
Genomatica/Chemtex,
Genomatica/Tate & Lyle,
Metabolix (from poly-3-
hydroxybutyrate (PHB), 8,000
m.t./y SE Asia, Myriant/DPT
Lanxess, Genomatica: trial run June
2013 of 20 m.t. PBT using Genomatica‘s
bioBDO. Genomatica did five-week BDO
run, 2,000 m.t., Toray Apr 2013, BASF
and Geonomatica, May 2013, Novamont
(Genomatica), 2013
18 Isoprene Amyris, Genencor/Goodyear,
Glycos Biotechnologies due to start
BioSIM (biobased Synthetic Isoprene
Monomer) production 2014
19
2,5-
Furandicarboxylic
acid (FDCA)
Avantium, 20-m.t./year pilot
plant; partnership with Solvay
for nylon,
engineering,thermoplastics
Avantium at engineering stage for a
50,000-m.t./year plant
20 Glucaric acid Rivertop Renewables
21
Adipic acid and
other nylon
precursors
BioAmber/Celexion, Draths
(now Amyris), Genomatica,
Rennovia, and Verdezyne
22
Hexamethylenediam
ine (HMDA)
Rennovia, Draths (now Amyris)
23 Aromatics
Virent (BTX); 10,000-gal/year
pilot plant, Annellotech
24 para-Xylene (PX)
Gevo2: from bioisobutanol,
Virent Energy Systems, Toray:
from biobutanol, Anellotech
25
Sebacic acid
(decanoic acid),
dodecanoic acid
Verdezyne Cathay Industrial Biotech

24.
24
Bio-based polymers, producing companies in Europe and production capacities (t/a)
Production Capacities
(Tonnes / Annum)
Bio-based Polymers
Number of Producing
Companies
2013 2020
PLA 07 8.230 226.730
Starch Blends 07 279.000 539.000
PHA 07 10.050 10.090
PA 07 16.000 31.000
PBAT 01 74.000 74.000
Polyolefins (PE, PP, PVC, EPDM) 00 0.000 -
PET 00 0.000 300.000
PBT 01 <50 80.000
PUR 03 39.450 39.450
Total 426.780 1,300.270
Source: Report Market Study on Bio-based Polymers in the World, 2013-3
** Source: Bio-based Polymers Producer Database, 2013-07
Bio-Propylene Glycol
No. Company Based In Capacity Started In
1 ADM (Decatur, Ireland) North America, USA 100,000 t/a
2010 Hydrogenolysis of
glycerol and sugar alcohols
2 Cargill / Ashland North America, USA 65,000 t/a 2008
3 Dow Chemicals North America, USA 1000 t/a
4 Senergy North America, USA 30,000 t/a 2008
5 Global Biochem China Hydrogenolysis of sorbitol.
Biobased propylene glycol has achieved the same product specifications as petrochemical
propylene glycol. Life cycle assessment of biobased propylene glycol estimates greenhouse gas
impacts for production of bio-based propylene glycol from soybean derived glycerol are
approximately 80% that of petro-PG
Bio-Succinic Acid
No. Company Based In Capacity Started In
1 BioAmber North America, USA 23,000 t/a 2014
2 BioAmber (DNP/ard) North America, USA 3000 t/a 2009
3 CSM / BASF Europe DE 15,000 t/a 2011
4 Lanxess Europe DE 20,000 t/a 2012
5 Myriant North America, USA 15,000 t/a 2013
6
Myriant Technologies, Davy
Process Technology
North America, USA 15,000 t/a 2013
7 Roquette/DSM Europe/FRA 10,000 t/a 2012
8 Roquette/DSM Europe/ITA 10,000 t/a 2012
9 BASF-Purac JV 50,000 t/a
10 BASF-Purac JV Barcelona, Spain 25,000 t/a 2013
11 BioAmber-ARD Pomacle, France 3000 t/a 2012
12 BioAmber-Mitsui JV US or Brazil 65,000 t/a
13 BioAmber-Mitsui JV Sarnia, Ontario, Canada
17,000 Initially
34,000 finally
2013
14 BioAmber-Mitsui JV Thailand 65,000 t/a 2014

25.
25
15 Myriant Lake Providance, Louisiana 13,600 t/a 2013
16
Myriant-China National
BlueStar
Nanjing, China 1,10,000 t/a
17 Myriant Lake Providence, Louisiana 77,110 t/a 2014
18
Myriant-Uhde (owner and
operator)
Infraleuna site, Germany 500 t/a 2012
19 Reverdia (DSM-Roquette) Cassano Spinola, Italy 10,000 t/a 2012
Ref. ICIS, Company Reports
Epichlorohydrin
No. Company Based In Capacity Started In Investment
1 Dow Chemicals
North America,
USA
1000 t/a 2011
2 Solvay Europe FRA 100,000 t/a 2014 Asia China
3 Solvay Europe FRA 10,000 t/a 2010 Europe FRA
4 Solvay Europe FRA 100,000 t/a 2012 Asia THA
5 Yangnong Asia China 150,000 t/a 2011 Asia China
Green Chemistry principles
Principle 4 - Use renewable (biobased) feedstocks: Use raw materials and feedstocks that are
renewable rather than depleting. Renewable feedstocks are often made from agricultural
products or are the wastes of other processes; depleting feedstocks are made from fossil fuels
(petroleum, natural gas, or coal) or are mined.
Principle 12 - Design chemicals and products to degrade after use: Design chemical products to
break down to innocuous substances after use so that they do not accumulate in the
environment.
Shift towards Biobased Chemicals and Products
―The Sustainable Biomaterials Collaborative‖ is a network of organizations working together to
spur the introduction and use of biomaterials that are sustainable from cradle to cradle. The
Collaborative seeks to advance the development and diffusion of sustainable biomaterials by
creating sustainability guidelines, engaging markets, and promoting policy initiatives.
The European Union has set a goal of agrofuels providing 5.75 percent of Europe's transport
power by 2010 and 10 percent by 2020. US production of ethanol from corn and other crops
continues to increase resulting in rising commodity prices. The International Food Policy
Research Institute has estimated that the price of basic staples will increase 20 to 33 percent by
2010 and 26 to 135 percent by 2020.
The demand for agricultural based energy supplies has resulted in the expansion of agrofuel
monocultures. Agrofuels refer to large-scale industrial monoculture production of crops such as
soy, oil palm, sugar cane, jatropha, canola etc. for fuels and do not include small scale,

26.
26
sustainably grown fuel crops that benefit local communities, do not employ genetically
engineered (GE) varieties, and can be accurately referred to as "biofuels."
Questions about Biobased Materials
1. Is the product useful to begin with? Is it needed?
2. Is the source of the biobased material sustainably grown, i.e., the biobased material was
not treated with pesticides?
3. Is the land used for growing the biobased material needed for other uses, such as food
production?
4. Is the manufacturing process clean and adaptable to local manufacturing expertise?
5. Are genetically engineered organisms used in the manufacturing process?
6. What additives are used in the final product?
7. Is there a composting component to the product development? What happens to the
product after its use?
Biobased Chemicals, Products and Producers
Sr. No. Chemical End Product Key Companies
1 Butanol
Solvents, Paints, Butyl
rubber, PET, Fuels
Gevo, Butamax (isobut), Cathay, MetEx,
Cobalt (n-but)
2 Adipic acid
Nylons, resins,
Polyurethanes
Verdezyne, Rennovia, BioAmber,
Inventure, Genomatica
3 Succinic Acid
C4 molecules, PBS,
PBT, Solvents, de-
icers
BioAmber, Myriant, DSM/Roquette,
BASF/Purrac
4 Butanediol (BDO)
C4 molecules, PBS,
PBT
Genomatica, LanzaTech (2,3-BD),
BioAmber
5 Butadiene Rubber, ABS Genomatica, Amyris, Global Bioenergies
6 Isoprene Rubber
GlycosBio, AE Biofuels/Zymetis, Amyris,
Genencor, Global Bioenergies
7 Propanediol (PDO)
Fibers, Cosmetics,
Polyurethanes, PBT
DuPont, GlycosBio, Inventure, MetEx
8 Acrylic acid
Coatings, Adhesives,
Plastics
OPX Biotechnologies, Itaconix, Novomer
9 Furans
Polysters,
Polyurethane, Fuels
Avantium, Pennakem
10 Teraphtalic acid PET, Plasticizers Draths, Aventium, Gevo
Bio-lubricants
Petroleum based lubricants have been leading the industry since decades. However, these do
not readily degrade and, therefore, pose an environmental hazard. Once used, their disposal
becomes a challenge, the cost of properly disposing such material is high and improper disposal

27.
27
can create several health and environmental hazards. This creates need for biodegradable
lubricants.
Bio-lubricants are produced from natural oils and fats. In 2012, lubricants market is estimated at
38 million tonne (mt) out of which biolubricants account for approximately 3% share (1.2 mt).
Conservative estimates reveal that the global lubricant market is expected to reach
approximately 45 mt by 2020 out of which bio-lubricant will account for about 9% (4 mt) of the
market. Some companies have already spotted this opportunity and working towards building a
bio-lubricant based product portfolio, for example Cargill has developed an electrical insulation
fluid based fully on soybean oil.
Biopolymers
Like bio-lubricants, biopolymers are substituting traditional petrochemicals based polymers due
to their better bio-degradability. The market for bio-polymers is in its infancy and estimated at
approximately 1.3 mt globally in 2012 as compared to the global polymer demand of 180 mt. It
is expected to grow at a rate of 40% annually to reach about 20 mt by 2020 accounting for 7%
of the global polymer market.
This rapid penetration of biopolymers offers growth opportunity for companies. MNC‘s such as
BASF, Solvay, DuPont, DSM and Lanxess as well as few small companies like EarthSoul and
Harita have spotted this opportunity and are working towards building polymers based on
vegetable oils or various cellulosic materials.
Bio-based Surfactants
Bio-based surfactants (surface-active molecules) are produced by microbial fermentation or
enzyme-catalyzed reactions. Surfactants normally contain both hydrophobic and hydrophilic
groups. In the case of bio-based surfactants, at least one of these groups is made from
renewable resources.
The bio-based hydrophobic group is usually made from coconut oil or palm kernel oil. A
hydrophilic group is normally made from carbohydrates such as sorbitol, sucrose or glucose.
The use of animal fat has significantly decreased.
In contrast, the market for bio-based surfactants is expanding. Due to their good
biodegradability and low to zero toxicity, they are used in specific applications by the paint,
cosmetic, textile, agricultural, food and pharmaceutical industries. The mining and ore

28.
28
processing industry uses them as an emulsifier to facilitate oil production and for biological
cleanup of contaminated sites.
New age surfactants
Methyl ether sulfonate (MES) is a biochemical based substitute for linear alkyl benzene
sulfonate (LABS). Till now, the development of MES has been hindered by the lack of installed
production capacity. MES has many benefits over LABS. MES has excellent characteristics
such as high purity and active level, and is devoid of any volatile organic compound (VOC). It is
also gentle on the skin, has low percent of di-salt, is white/near white in colour, and is suitable
for both liquid and powder detergents.
In 2011, Jiangsu Haiqing Biotechnology setup a 100,000 tonnes per year MES plant in China
which is the largest plant of MES to go on stream. Such activities are further expected to drive
growth of MES and it will potentially start replacing LABS at a rapid pace. The current LABS
global market is estimated at about 3 mt and MES constitutes less than 1% of the same. It is
expected that by 2020, MES will replace one third of LABS demand to reach 1.2 mt.
Bio-based Solvents
In a study carried out on behalf of the German Ministry of Economics and Technology (BMWi),
the Fraunhofer Institute for Systems and Innovation Research (ISI) estimated that the global
solvents market is in the region of 19.7 million MT per annum. At least 12.5 % of the total
market volume could be produced from biomass, but the current figure is only 1.5 %. Solvents
belong to the aromatic and aliphatic hydrocarbon, alcohol, ketone, ester, ether, glycol ether and
halogenated hydrocarbon groups.
Production of most solvents is based largely on fossil feedstock. Due to sustainability and
environmental protection considerations, the spectrum is expected to shift towards bio-based
solvents. The list of new bio-based solvents includes things like fatty acid methyl esters, which
are also used in biodiesel, and esters of lactic acid with methanol (methyl lactate) or ethanol
(ethyl lactate) as well as natural substances such as D-limonene which is obtained from the rind
of citrus fruits.
Another trend is to replace conventional organic solvents with biogenic solvents. Conversion of
bio-based succinic acid or furfural (a byproduct of the cellulose industry) to tetrahydrofuran
(THF) is one example.

29.
29
Biodiesel
Biodiesel (methyl esters of various chain lengths) is one of the uses of bio based chemicals.
Any change in government regulations and blending norms for biodiesel can significantly impact
economics of bio based products. Increased requirement from biodiesel could push prices of
oils higher thereby making them less attractive vis-à-vis petroleum feedstocks. However, this
risk is largely mitigated due to a significant shift worldwide towards shale gas as the new and
economically viable energy source.
Continuous availability of feedstocks is a concern which remains at the top of the mind of
companies operating in bio based chemicals. Historically, about 12% to 14% of the world‘s
vegetable oil production has been used for bio based chemicals production. The emerging
applications would require an additional approximately 8 mt of vegetable oil by 2020. Estimates
show that this can be met with the increasing global vegetable oil production which is projected
to increase from 150 mt in 2012 to 185 mt by 2020.
Besides the above, companies are fast realising that there are other geographies around the
world which offer climatic conditions suitable for palm oil plantations. Sierra Leone and Liberia
form a major part of what is called the new frontier for palm oil production in West Africa. For
example, Golden Veroleum plans to invest up to $1.6 billion in Sierra Leone and is eyeing over
half a million hectares of land for palm plantations.
Bio based chemicals offer a significant diversification opportunity for chemical companies. Asia
is the preferred geography with a growing market and availability of feedstock. To capitalize on
this opportunity, companies can explore partnerships/mergers with other companies which are
integrated in related feedstocks or think about integrating forward/backward themselves.
Companies can also plan to establish their footprint in new geographies which could provide
them a first mover advantage and position them as a strong integrated player.
Purac produces - via its fermentation processes - a wide range of products which are mostly
100% biobased. These products can be used in many different applications, such as home &
personal care, animal health, coatings and inks, (agro)chemicals and offer the opportunity to
improve the carbon footprint of industrial and consumer products to consequently obtain more
sustainable products. Purac is also actively working on the the development of processes to
replace agricultural feedstocks with cellulosic feedstocks, so called 2nd generation biomass, in
order to not interfere with the food value chain.

30.
30
Stage of Bio-based Chemicals
Commercial Success
(Intermediates)
Coming Soon
(Drop-In Intermediates)
Under Development
(New Feedstock)
1,3 PDO
 DuPont Tate & Lyle
ferments corn sugar to
produce 1,3 PDO in
Loudon, Tenn.
 Reports of glycerol-
based PDO in China
BENZENE, TOLUENE, XYLENE
(BTX)
 Anellotech‘s Bio-BTX,
Virent‘s BioFormPX
 Paraxylene from Gevo‘s
isobutanol
2,5 FDCA (Furan Dicarboxylic
Acid)
 FDCA + MEG =
Polyethylene Furanoate
(PEF) as alternative to
PET
 Nylons and Aramids
using adipic acid can be
reformulated with FDCA
BUTANOL
 Corn-based n-butanol
already produced in
China - Cathay Industrial
Biotech, Laihe Rockley,
small firms
 Gevo started corn-based
isobutanol shipments this
year
ADIPIC ACID
 Verdezyne, Rennovia,
DSM, Genomatica,
BioAmber
Carbon Monoxide / Carbon
Dioxide
 CO2 + Propylene Oxide
= Polypropylene
carbonate (PPC)
 CO2 + Ethylene Oxide =
Polyethylene carbonate
(PEC)
 CO2 Polyether
Polycarbonate Polyols
(PPP)
 CO + Ethylene Oxide =
Propiolactone
 CO/CO2 C2-C5 products
(via GTL and
fermentation)
SUCCINIC ACID
 Reverdia and Myriant
plants running, BioAmber
and Succinity to follow
early 2014
ACRYLIC ACID
 OPX
Biotechnologies/Dow
Chemical, Myriant,
Novozyme/Cargill/BASF,
ADM, Novomer,
Metabolix
Levulinic Acid
 LA β-acetacrylic acid =
New acrylate polymers
 LA Diphenolic acid =
Replacement for
Bisphenol-A
 LA 1,4-pentanediol =
New polyesters
 LA–derived lactones for
solvents application
GLYCOLS
 ADM, Oleon producing
PG using glycerol (and
sorbitol for ADM) as
feedstock. HK-based
Global Bio-Chem
produces PG using corn
glucose
 Greencol Taiwan, India
Glycols producing
bioMEG from sugarcane-
based ethanol
BUTANEDIOL
 Genomatica, Myriant,
BioAmber, LanzaTech
EPICHLOROHYDRIN
 Vinythai produces
glycerol-based ECH in
RUBBER FEEDSTOCK –
BUTADIENE, ISOPRENE,
ISOBUTENE

31.
31
Thailand, plans another
100KTY facility in China
 Reports of Chinese plans
for bio-ECH
 Butadiene –
Amyris/Kuraray,
LanzaTech/Invista,
Versalis/Genomatica,
Global
Bioenergies/Synthos,
Cobalt Biotechnologies
 Isoprene –
Amyris/Michelin,
Ajinomoto/Bridgestone,
DuPont/Goodyear,
Aemetis, Glycos
Biotechnologies
 Isobutylene - Global
Bioenergies/LanzaTech,
Gevo/Lanxess
FARNESENE
 Start of Amyris‘ 50m
liters/year
sugarcanebased
fermentation plant in
Brazil this year
 Building block for
lubricants, base oil,
isoprene, squalene, F&F
ingredients
POLYAMIDES
 Brand owners such as
Nike, Puma, Gucci are
using castor oil-based
PA10 and PA11
 Bio-based PA producers
include Arkema, Evonik,
BASF, Solvay, DSM,
Radici Group, DuPont,
EMS-Chemie
Commercial Success (Biopolymers) (2011 Status – Global Bioplatic Production Capacity)
Bio-based / Non-biodegradable (58.10%) Biodegradable (41.90%)
Bio-PA (1.6%) PLA (16.1%)
Bio-PE (17.2%) PHA (1.6%)
Bio-PET 30 (38.9%) Biodegradable Polysters (10%)
Others (0.4%) Biodegradable Starch Blends (11.3%)
Regenerated Cellulose (2.4%)
Others (05%)
Source: European Bioplastics, Institute for Bioplastics and Biocomposites (Oct. 2012)

32.
32
Recent Large Projects from bio-based feedstocks
1. DuPont Bio-PDO (SeronaR
) – fermented product is 1,3 Propane diol – 45 KTA plant -
Key processes are fermentation, condensation, polymerization – Initial product is
PDO/TPO copolymer
2. NatureWorksTM
- PLA – fermented product is lactic acid – 140 KTA plant – Key
processes are fermentation, Oligomerization, ring closing and ring opening,
Polymerization – Initial product is Polylactic acid
3. Braskem – Polyethylene – fermented product is ethanol - 200 KTA plant – Key
processes are fermentation, dehydration, polymerization – Initial product is Ethylene,
Polyethylene copolymers
4. Archer Daniel Midland (ADM) – Propylene Glycol Plant
5. Arkema – High performance polyamides
6. Solvay Indupa (Brazil) – Polyvinyl Chloride
The bio feedstock platform for the production of bio products is mainly focused on the following
chemical functionalities.
Vegetable oil/fatty acid esters of glycerol Vegetable oils and fats provide useful chemical
functionalities such as unsaturation and ester groups for further modifications using
conventional schemes such as hydrogenation, selective oxidation, epoxidation, meta thesis
reaction and others to introduce functionality of value in diverse applications such as
plasticizers, coatings, adhesives, polymers, composites, etc. Several bio products such as
bioplasticizers for PVC, bio toners, biopolyols based on this approach have been
commercialized recently.
Sugar-based platform Platforms based on sugars have been deployed to create acids such as
succinic acid and convert the acid to high value chemicals such as 2- pyrrolidone, 1, 4 butane
diol, tetra hydrofuran and others.
More recently cellulosic feedstock has been converted to 5-hydroxymethyl furfural (HMF) using
some novel catalysts and ionic liquids as platform chemical to make a variety a high value
chemicals derived from petroleum sources
Cellulosic Platform Various building block molecules such as 5-hydroxymethylfurfural (HMF),
derived from cellulosic biomass, can be converted into many types of value added chemicals
now obtained from petroleum sources.
Startup companies such as Segetis are developing novel chemicals based on levulinic acid for
use as replacement solvents and plasticizers. Roquette has been actively pursuing commercial

33.
33
scale production of isosorbide from sugar feedstock useful in the development of bioplasticizers
and bisphenol free polycarobonate resins.
Glycerine Platform Bio products are derived from crude glycerine, a co-product of biodiesel
production.
Challenges for Bio-based Chemicals Industry
1. Availability of crude oil and their price
2. Concern that food security can be impacted
3. Concern about destroying forest
4. Transition from petro to bio not smooth in the beginning
5. Technological challenges
6. Investments required for scaleup and downstream processing
7. Feedstock availability
8. Using cellulosic biomass and agricultural wastes as raw material
9. The technology for converting biomass to chemicals is being developed in US and
Europe, but the biomass is in South East Asia and in Latin America
10. Market pull is there but capital investments (risk averse) are difficult
11. Price competition of biorefinaries with petrorefinary
12. Partnering with feedstock producers and technology possessors is pivotal

34.
34
Chapter 2
Worldwide Scenario of Biobased Chemicals
2.1 Key Drivers for Bio-based Economy
2.2 Where bio-based chemicals are produced?
2.3 Key Drivers Affecting Bio-based Chemicals Market
2.4 Biobased Chemicals in US
2.5 Biobased Chemicals in Europe
2.6 Biobased Chemicals in Asia
2.7 Biobased Chemicals in Japan
2.8 Biobased chemicals in China
2.9 Biobased chemicals in Canada
2.10 Biobased Chemicals in Malaysia
2.11 Bio-based Chemicals in North America
2.12 Biobased Chemicals Companies in 2013
Key Drivers for Bio-based Economy
 Oil age will end. Oil will be very expensive as it will run out (Every single day world uses
100 million barrels of oil)
 Carbon emissions are expected to increase by 88% by 2030
 Global population will reach 9 billion by 2040-2050. Energy and food needs will grow
exponentially.
Bio-based chemical investments are driven by raw material availability, price and cost of
production, but other factors such as political and financial support play an important role when
the first large-scale facility is decided. China, Brazil, Thailand and the US are clear winners in
the game. Shale gas has had and will continue to have a direct and indirect impact on bio-based
chemical investments.
Where bio-based chemicals are produced?
Total market for bio-based chemicals is $12 billion. Production share of different countries of
this market in 2013 was as follows.
U. S. 15.4%
China 12.2%
Argentina 07.8%

35.
35
Brazil 06.5%
Indonesia 09.0%
Malaysia 08.0%
Thailand 04.0%
France 04.7%
Germany 07.3%
Netherlands 06.8%
Other Europe 10.0%
Key Drivers Affecting Bio-based Chemicals Market
 Moving away from petroleum dependency
 Increased Consumer environmental responsibility
 Movement towards sustainability by manufacturers
These drivers result in policies and regulations supporting adoption of bio-based chemicals.
Over 70% consumers equate ―Green‖ with products made from natural or organic ingredients.
44% Senior executives of organizations believe that sustainability is critical to success.
(Ref. Norman Deschamps Presentation for ―Meet the Expert Series‖)
According to Lux Research, a Boston based company global bio-based capacity in 2017 will be
13.2 million tonnes. North America‘s share will decrease from 15% to 13%, whereas Asia‘s will
increase from 52% to 55% and South America‘s from 13% to 18%.
Biobased Chemicals in US
The US chemicals and plastics industry was in the forefront for four decades from World War II.
Historically, the U.S. chemicals and plastics industry was the envy of the world. At its peak in
the 1950s, the industry was responsible for over 5 million U.S. jobs and a $20 billion positive
trade balance for the United States. Jobs associated with the industry were typically among the
highest paid in U.S. manufacturing.
Over the last two decades, competitive advantage for chemicals and plastics manufacturing has
shifted towards the Middle East and Asia, as has the industry. U.S. employment in the sector
has dropped over the last decade and is projected to shrink further as capital investment for the
petroleum-based industry has essentially shifted away from the United States.
Biobased chemicals and plastics represent a historic opportunity to reverse these trends
through the creation of a new generation of renewable, sustainable products developed and
produced in the United States. As production of chemicals and plastics moved to other countries

36.
36
after 1980 this chemicals industry eroded in US. The number of jobs in the sector is indicator of
this. The nascent biobased products industry employed over 5,700 Americans at 159 facilities in
2007. Presently, less than 4 percent of U.S. chemicals sales are biobased. But a recent USDA
analysis puts the potential market share in excess of 20 percent by 2025 with adequate federal
policy support.
Conditions favourable for US to lead again in Biobased products as alternative to petroleum
based products are –
 Leading position in industrial biotechnology,
 strong agriculturable base with large arable land,
 largest chemicals and plastics market,
 downstream industry for biobased products (e.g., converting, logistics, warehousing) is
already in place
The global chemical industry produced approximately US$1.9 trillion worth of products through
conventional petrochemical-based processes using more than 2 billion barrels of crude oil in
2005. The processes are energy intensive and environmentally unfriendly emitting about 1.5
billion tons of CO2. The industrial chemical business in USA is $340 billions.
In the US, 5% of each barrel of oil goes to petrochemicals, whereas 70% goes for the
transportation fuels. The US chemical industry contributes greatly to the US economy. It
contributes $720 billion to US economy which is 5% of GDP. Out of this $170 billion is in
exports. However global share of USA in chemical market has come down from 27% in 1999 to
19% in 2009. Bio-based chemical production is suitable for exploiting America‘s strong
agriculture and forestry infrastructure. The global interest in bio-based chemicals and products
is developing at pace. Current research indicates that the green chemical industry market will
reach $98.5 billion by 2020 (Pike research).
To foster growth of the biobased products sector in the United States, federal policy should
provide strong support for research, development and commercialization of innovative biobased
products, including grants and loans for construction of biorefineries, a strong biobased markets
program, and tax incentives for pioneering commercial production.
President Obama has declared ―Bio-economy‖ as major engine for American innovation and
economic growth.
Biobased Chemicals in Europe
In 2004, global chemical production amounted to 1736 billion. European Union (EU) accounted
for more than one third of this at 580 billion. EU was ahead of USA and Asia. Europe is losing

37.
37
out in the number of large scale bio-based chemical plants although there have been many
initiatives in pilot phase operations, strong research support and significant activities in bio-fuels.
Europe lags behind in investments for bio-based chemicals industry.
Europe‘s share will decrease from present 20% to 14%. According to Lux Research Report,
Europe‘s share of bio-based chemicals is expected to drop from 37% in 2005 to 14% in 2017.
European Commission President Barroso and Commissioner for Research, Innovation and
Science Geoghegan-Quinn announced in Brussels the formal launch of a €3.7 billion Public-
Private Partnership (PPP) on biobased industries. This shows that Europe also wants to make
leading transition to biobased economy. More than 70 leading European companies in the
biotech, chemical, energy, agro-food and pulp and paper sectors are part of the initiative. By
2020, the ambition is to have at least five flagship biorefineries – each of which is expected to
generate feedstock supply chain jobs between 12,000 to 18,000 annually.
Immediately, substantial investments in biobased products and fuels sourced locally and "Made
in Europe" will be initiated using the continent‘s untapped biomass and wastes as feedstock to
make fossil-free and greener everyday products. All while creating jobs, sparking rural growth,
and reducing greenhouse gas emissions.
Biobased Chemicals in Asia
According to Lux Research, the global bio-based chemicals industry is scaling to commercial
levels - driven by corporate partnerships, private investments, and innovative technologies. As
producers scale up, staying consistent in quality and competitive on both cost and performance
are important in capturing market share from petroleum derived chemicals.
Most of the investment in new bio-based polymer capacities will take place in Asia and South
America because of better access to feedstock and favourable political frameworks.
Bio-based materials and chemicals have moved from the laboratory stage to commercialization,
totaling over 4 million tons of annual production capacity. Though still miniscule in market size
relative to the fossil derived chemicals, growth is boosted by consumer preference for
environmental friendly products, corporate commitment to renewable and sustainable brand
values and government mandates, especially in Europe and beyond.
Asia is blessed with extensive agriculture biomass resources, feedstocks and access to
markets. The ASEAN region is becoming an attractive hub hosting production. Production
capacity for bio-based materials and chemicals in ASEAN, in particular Thailand, Malaysia,
Indonesia and Vietnam, rose from 500,000 tons to 816,818 tons from 2006 to 2011 and this
growth is expected to rise 87.3% to 1,529,636 tons. Across Japan, Korea and rest of Asia,

38.
38
production capacity climbed 31.11% to 309,200 tons from two years ago, and expected to
nearly double in three years.
Asia has become a key region for bio-based polymers and their precursors. Some examples are
current developments in Thailand (Purac, PTT), India (India Glycol Ltd.), Taiwan (Greencol
Taiwan), China (Henan Jindan, Shenzhen Ecomann, Tianan Biologic Materials, Tianjin Green
Biomaterials) or Japan (Kaneka, Teijin Limited, Toyota), which include future or existing
production of lactic acid, lactide, succinic acid, 1,4-BDO, MEG, PET and PHA.
Fueled by the strong growing demand for environmentally sustainable and biodegradable
products, the bio-plastics industry is gearing up for exciting new developments. We can
anticipate changes in the global scene as the bioplastics production expands from Brazil, China
to South East Asia. Braskem is a clear leader in the field. It rolled out its construction of the first
bio polypropylene (PP) and second bio polyethylene (PE) in 2012. As such with PTTMCC
Biochem, for polybutylene succinate (PBS) plant, which started construction in Thailand,
NatureWorks is also considering a new bio-plastics plant in the region, later in 2012.
Biobased Chemicals in Japan
Japan mainly imports its petroleum-based raw materials, so is dependent on the price of oil. The
country depends heavily on oil-based naphtha for chemical feedstock. Japanese chemical
companies such as Mitsubishi Chemical Company (MCC), Mitsui & Co., Toray Industries and
Kuraray among others are searching upstream in their quest for alternative petrochemical
feedstocks and sustainable chemistry through development collaborations with several US
renewable chemical firms. Japan does not have the culture like that of venture capital in USA.
New start-ups are difficult. Large corporations have to be directly involved in for new technology.
These companies in most cases are engaging with non-Japanese firms to access foreign
innovation and also foreign feedstocks. Mitsubishi Chemical Company (MCC) is one of the 10
largest chemical companies in the world.
Green Partnerships of Japanese Companies:
Location of green chemicals commercialization is very important and should be situated where
biomass feedstock is available with competitive conditions such as in North America, Brazil and
Asia.
1. MCC's renewable chemicals strategy is to make bio-based chemicals with the exact
same properties as petroleum-based ones. MCC has plans to replace some of its basic
raw materials such as C3 and C4 with renewable-based alternatives. MCC has
partnered with Thailand-based petrochemical firm PTT Group to form the 50:50 joint

39.
39
ventures PTT - MCC Biochem Company, which aims to produce the bioplastic
polybutylene succinate trademarked GSPla in a 20,000 tonne/year facility that will be
built in Map Ta Phut, Thailand. The sugar-derived biodegradable aliphatic polyester has
similar properties like polyethylene (PE).
2. PTT - MCC also has partnered with US-based biosuccinic acid producer BioAmber for
succinic acid feedstock supply to the plant. The facility is expected to start in 2014.
3. MCC also announced a memorandum of understanding with US-based renewable
chemicals firm Genomatica to study potential areas of collaboration involving bio 1,4
butanediol.
4. Mitsui has teamed up with BioAmber to distribute bio-succinic acid and derivatives
exclusively in Asia.
5. One of Mitsui's biggest bio-based chemical projects announced this year is its 50:50 joint
venture partnership with US-based Dow Chemical for the production of PE that will be
back-integrated to a planned sugarcane ethanol facility in Brazil. Under the deal, Mitsui
would become an equity interest partner in Santa Vitoria Acucar e Alcool, Dow's
sugarcane growing operations in Minas Gerais, Brazil. Mitsui's Enatsu expects to build a
350,000 tonne/year bio-PE plant in Brazil through the venture.
6. Japan's Toray and Kuraray also have formed partnerships with US-based bio-butanol
producer Gevo and renewable chemicals firm Amyris, respectively.
7. In June, Toray and Gevo announced that they were able to produce, in laboratory scale,
100% bio-based polyethylene terephthalate (PET) using Gevo's isobutanol-based
paraxylene (PX). The companies are moving from lab-scale proof-of-concept to
establishing commercial-scale operations for bio-PX. Gevo expects the bio-PX project to
go to pilot stage in 2012 and is targeting commercialization by 2014.
8. Kuraray and Amyris have announced their partnership to develop polymers using
Amyris' farnesene-based building block Biofene. Farnesene is a sesquiterpene molecule
that is part of a larger class of chemical compounds called terpenes. Amyris' farnesene
is derived from sugar. They plan to use Biofene to replace petrochemicals such as
butadiene (BD) and isoprene in the production of certain high-performing polymers. On
successful completion of the development program for the first polymer, they expect to
enter a supply deal for Kuraray's exclusive use of Biofene in the manufacturing of the
targeted polymer products.
9. Japan's Toyota Tsusho is expecting to start commercial operation of the world's first bio-
PET integrated supply chain that will include procuring bioethanol, the production of bio-

40.
40
monoethylene glycol (MEG) and tolling and marketing of bio-PET later this year. Toyota
Tsusho has established Greencol Taiwan in a 50:50 joint venture with Taiwan-based
China Man-Made Fiber Corp. (CMFC) for a 100,000 tonne/year bio-MEG production
plant located in Kaohsiung, Taiwan. Toyota Tshusho will handle all the bio-MEG from
Greencol Taiwan and supply the intermediate chemical to PET manufacturers on a
tolling basis. The bio-PET produced is expected to be sold to end-users in Japan,
Europe and the US.
Biobased chemicals in China
China's 12th Five-Year Plan identifies biotechnology as one of seven "Strategic Emerging
Industries". According to a survey released by Dupont in December 2012, the acceptance of
bio-based products with Chinese consumers is even larger than that in North America. In year
2013, China State Council has passed blueprint of bio industry development planning which put
forward general target of bio industry including bio manufacturings bio-energy, bio-materials, etc
and point out that since 11th Five-Year Plan, the output value of China bio industry has been
growing at about 22.9% every year.
Three companies in China are planning to produce succinic acid by biological methods
 Shandong Landian Biotech, started a small pilot plant at end 2013
 Sinopec Yangzi Petrochemical, with a 1,000 tpa pilot plant at Nanjing
 Bluestar, planning to build a 100 ktpa plant in association with JM Davy
There are "more than 10 plants" in China running microbial acrylamide production using a
Nocardia strain to yield a total production capacity which "has exceeded 200,000 t/a", with plans
to increase this to 300,000 t/a
China had bioethylene production of 16290 tonnes in 2010 and is expected to be 25700 tonnes
by 2015.
According to an industry report by "Research and Markets", there were 4 major manufacturers
of Bio[polymers (PLA) in China in May 2011, with a number of expansion or new projects on the
way. The production of biobased ethanol is well established in China. As China's ethylene
production is currently lower than the demand, the conversion of ethanol to PE might be
economically feasible. Intensive work is underway in China on polybutylene succinate.
China is one of the few countries, which maintained the fermentative acetone–butanol–ethanol
(ABE) production for several decades. Until the end of the last century, the ABE fermentation
from grain was operated in a few industrial scale plants. Due to the strong competition from the
petrochemical industries, the fermentative ABE production lost its position in the 1990s, when all

41.
41
the solvent fermentation plants in China were closed. Under the current circumstances of
concern about energy limitations and environmental pollution, new opportunities have emerged
for the traditional ABE fermentation industry since it could again be potentially competitive with
chemical synthesis. From 2006, several ABE fermentation plants in China have resumed
production. The total solvent (acetone, butanol, and ethanol) production capacity from ten plants
reached 210,000 tons, and the total solvent production is expected to be extended to
1,000,000 tons (based on the available data as of Sept. 2008).
M&G Chemicals launches green revolution in the polyester chain
M&G Chemicals will construct a second-generation bio-refinery in the region of Fuyang, Anhui
Province of China for the conversion of one million metric tons of biomass into bio-ethanol and
bio-glycols.
The project is expected to be realized through a joint-venture with Chinese company Guozhen
which will make available one million metric tons of straw biomass and use the lignin resulting
as a by-product from the bio-refinery to feed a 45 MW cogeneration plant which will be
constructed at the same time as the bio-refinery in the same site. M&G Chemicals will be
majority partner of the bio-refinery and minority partner of the power plant.
The bio-refinery will employ PROESA™ technology licensed from Beta Renewables, a joint
venture between Biochemtex (a company belonging to the Mossi Ghisolfi Group), US private
equity fund TPG and Danish enzyme producer Novozymes.
The second-generation bio-refinery will be approximately four times the size (measured by
volume of biomass processed) of that built by Beta Renewables in Crescentino, Italy.
The plant, which is expected to require capital expenditures of approximately half a billion US
dollars, is expected to be brought on stream in mid 2015.
Necessary enzymes will be supplied by Novozymes, one of the world‘s largest enzymes
producers and one of the partners in the Beta Renewables joint venture, which owns the rights
of the PROESA™ technology.
Biobased chemicals in Canada
Sarnia and Lambton is becoming the leading location for the bio-based chemical industry and
green energy industry in Canada.
BioAmber, Methes; Suncor Ethanol; Enbridge (solar energy) and Greenfield Ethanol are the
companies which have started activity in Sarina (Canada).

42.
42
The challenge is to engage all Canadians in building a bio-based economy that becomes the
foundation for a safer, cleaner, healthier and more sustainable future. Sarnia is meeting the
challenge and is a model for other developing clusters in Canada.
Biobased Chemicals in Malaysia
The Malaysian government is planning to develop Asia‘s largest biorefinery site in Kertih, in the
state of Terengganu, to attract manufacturing facility investments from foreign companies that
can produce bio-based chemicals and materials. The 1,000-ha (4,050-acre) biorefinery site,
which will be in the Kertih Bio-polymer Park, is a collaboration between the Terengganu state
government, BiotechCorp and the East Coast Economic Region Development Council
(ECERDC). The ringgit (M$) 170m ($53.5m, €42.3m) project is expected to create 2,500 jobs
for Malaysia. In addition, 30,000 ha will be dedicated for feedstock plantations that will produce
10.5m tonnes/year of wood chips from Acacia mangium and Leucaena leucocephala or locally
known as Petai Belalang. This will be Malaysia‘s first biorefinery project that will use cellulosic
feedstock to produce advanced carbohydrates, bio-based chemicals, bio-based materials,
biofertilizers and active feed ingredients. BiotechCorp and ECERDC have secured a M$2bn
investment from a joint venture between South Korean chemical firm CJ CheilJedang and
France-based Arkema to develop the world‘s first bio-methionine plant in Kertih Biopolymer
Park.
Malaysia has been attracting several renewable chemical companies to set up shop such as
METabolic EXplorer for a bio-PDO production, Glycos Biotechnologies for bio-isoprene, and
Gevo for bio-isobutanol.
Bio-based Chemicals in North America
As the shale gas boom continues, North American ethylene producers are increasingly shifting
from petroleum-derived naphtha to lighter, natural gas-based feedstocks. Sugars, glycerin and
other plant-derived products are now emerging as economically competitive starting materials
for a range of commodity chemicals, writes the IHS Chemical Special Report: Chemical Building
Blocks from Renewables.
In 2013, total annual production capacity for renewably sourced chemicals was approximately
113 million metric tons (MMT), including nearly 89 MMT of ethanol capacity. Natural fats and
oils have, for many years, served as feedstocks for fatty acids and fatty alcohols; starches and
sugars are well established starting materials for ethanol, lactic acid and sorbitol. More recently,
plant-derived feedstocks have emerged as economically viable starting materials for commodity

43.
43
chemicals such as butanediol, isoprene and para-xylene, as well as for novel chemicals such as
2,5-furandicarboxylic acid and isosorbide. Since these bio-based chemicals are derived from
agricultural products, the value chain for the bio-based chemicals sector differs significantly from
that of the chemical industry. Industrial biotechnology firms and start-up companies with focused
expertise in chemical catalysis - are emerging as chemical producers and in many cases,
partnering with established agricultural processors and chemical manufacturers to gain access
to capital, fermentation or chemical processing expertise, proprietary technology, or feedstocks.
North America is leading the global bio-based & sustainable chemicals industry.
 Consumer demands for greener products are driving retailers, brand owners, and
government policy makers to replace petrochemicals and chemicals of concern with
safer, bio alternatives.
 New sources of funding from USDA and ARPA-E are enabling more innovation and
scale-up to demonstrations and commercialization stages.
 Bio-based chemicals are receiving an unexpected boost from the shale gas boom,
opening the door for drop-in bio-based C3-C5 chemicals.
 Further, Bio-based chemicals are also not at the mercy of volatile natural gas and oil
prices, offering the potential for more stable, or even lower prices than their
petrochemical alternatives.
 Low gas prices are making bio-based polymers uncompetitive. With investors on the
sidelines, major chemical companies can enter this market cheaply.
However, the industry still faces ―growing pains‖ in moving some market segments from the
technology vetting stage to full-scale commercialization. Some companies have erred in trying
to commercialize too quickly, providing valuable lessons to be learned. The next generation of
bio-based companies must learn what is needed to compete, understand its role in the larger
sustainability picture and address the challenges associated with moving beyond niche markets.
With a number of joint ventures in the space recently between technology companies and
chemicals majors, partnering strategies are the key to commercialization.
Impact of low North American natural gas prices on bio-based chemicals investments
I. The bio-chemical industry is going through a very interesting dynamic in that low natural
gas prices in the US are negatively impacting the materials which were dedicated or
focused on bio-polyethylene as an example where of course low ethylene prices have
made it very non-competitive for the polyethylene.

44.
44
II. One example is that Petrobras in Brazil has backed off on the production of bio-
polyethylene, and Dow has postponed their movement into the bio-polyethylenes
because of the low competition of ethylene.
III. On the flip side, as a result of the Shale Gale, the higher products such as the C4s are
much more competitive. The prices are higher because they‘re not being produced in
ethane crackers, so that represents an opportunity for bio-C4s and bio-C5s.
IV. What we see is that companies are focusing in those value chains of the C4s and 5s
because of the higher feed stocks for conventional petro-chemical. Overall, it‘s very
interesting. The higher oil prices and the lower natural gas prices are retarding the
development on one end of the chain, but augment the opportunities in the other end of
the value chain, meaning the C4s versus the C2s.
The IHS report observes following companies currently active in this sector.
i. Archer Daniels Midland is producing propylene glycol from glycerin, a co-product of
biodiesel production. BASF, a licensee of Genomatica's technology, is supplying bio-
based 1,4-butanediol, a spandex precursor.
ii. Agricultural processor Cargill Inc., a producer of sorbitol and lactic acid, is developing
routes to bio-based acrylic acid with Novozymes and BASF.
iii. DuPont Tate & Lyle Bio Products, a joint venture of chemical producer DuPont and food
ingredient supplier Tate & Lyle, is now producing bio-based 1,3-propanediol, a starting
material for fibers and engineering plastics as well as an ingredient in personal care
products.
iv. Solvay, Jiangsu Yangnong Chemical and Vinythai Public Co. Ltd. are producing bio-
based epichlorohydrin from glycerin. Gevo Inc. produces bio-based isobutanol on a
commercial scale and bio-based para-xylene (a precursor of polyethylene terephthalate
(PET)-bottle resin) on a pilot scale.
v. Laihe Rockley Biochemicals produces bio-based butanol and acetone from agricultural
waste (corn stover and corn cobs).
vi. Although not yet at commercial-scale production, several tire manufacturers have
formed alliances to produce bio-based synthetic rubber from bio-based isoprene or bio-
based butadiene.
vii. BioAmber is building a $125-million plant in Sarnia, Ont., for North America that will
process high-fructose corn syrup into succinic acid, a basic building block from which
plastics and polyesters are fashioned. BioAmber says that it can profitably produce the
bio-based chemical so long as oil prices stay above $35 (U.S.) a barrel. At a $95 crude

45.
45
price and a $6.50 per bushel corn price, it expects its costs will be 50 per cent lower than
a petrochemical competitor.
Biobased Chemicals Companies in 2013
Out of 120 companies initially listed 30 companies leading in biobased chemicals are
announced every year by BioFueslDigest. These companies are six to seven years old and now
some of the world‘s largest chemical firms are utilizing their technology regularly. Genomatica,
Solazyme, Myriant, LanzaTech, and Elevance were declared as Top 5 companies in the field of
bio-based chemicals by BioFueslDigest.
1. Genomatica
The California-based Genomatica was at the top of the list in 2013, for the third year in a row.
Company specializes in developing complete process technologies to make the world‘s most
widely-used basic and intermediate chemicals from renewable feedstocks, using fermentations.
BASF, the world‘s largest chemical firm, produces their renewable 1,4-butanediol (1,4-BDO)
using Genomatica‘s technology. This same technology won the U.S. Environmental Protection
Agency‘s 2011 Presidential Green Chemistry Challenge Award for ―Greener Synthetic
Pathways,‖ as well as the Kirkpatrick Chemical Engineering Achievement Award.
In addition to BASF, more than one dozen companies have confirmed that Genomatica‘s
process works and generates a chemical equivalent to their current 1,4-BDO supply. This
quality match is critical since 1,4-BDO is an extremely versatile intermediate that acts as a
cross-linking agent for plastics, fibers, coatings, and many more industrial and everyday
products. Its largest uses are for the production of the solvent tetrahydrofuran (THF), which is
involved in the production of things like car bumpers and spandex pants, and PBT. 1,4-BDO
market is expected to be more than 5.5 million pounds by 2017, commercialized bio-1,4-BDO is
a huge milestone.
Genomatica attributes much of its market success to its business model. Company has licensed
its technology to partners, thereby accelerating the mainstream chemical industry‘s transition to
renewable resources. This helps to improve production economics, cost-competitiveness and
environmental footprint of its partners.
Genomatica has also demonstrated lab scale chemistries for an end-to-end process for
butadiene from non-food biomass. The Italian-based Versalis (a subsidiary of Eni) has signed
on as a partner and provided more than $20 million for the butadiene process development.