This document summarizes a study on WC-Co coatings produced by HVOF spray technique on stainless steel substrates. Three coatings were produced with varying WC particle size ranges. SEM analysis showed uniform distribution of WC particles in the coatings. XRD analysis identified WC and Co phases in the coatings. Hardness testing and pin-on-disc wear testing was conducted under varying loads and speeds. The coating with larger WC particle size (45-90μm) exhibited the lowest wear rate, indicating improved wear resistance with larger WC particle size. SEM of the worn surfaces showed grooves, pulled out particles and cracks formed during wear testing.
Dry Sliding Wear Behaviour of Rheocat Al-5.7Si-2Cu-0.3Mg AlloyDr. Manal Abdullatif
In this study, the effect of improved microstructure of Al-5.7Si-2Cu-0.3Mg alloys by using semisolid process on hardness and dry sliding wear behaviour were investigated. The microstructures of conventional cast alloy were totally dendritic, while in rheocasting the dendrit-ic transfer to fine globular microstructures after using cooling slope casting. Tribological tests were carried out by using a pin-on-disc apparatus in dry sliding conditions. Wear tests were at low sliding speed 1ms-1 ,applied load at 50N and three different sliding distance (i.e., 1.8Km, 5.4Km and 9Km) respectively. An optical microscope and a scanning electron microscope were used to examine the micro-structure and to understand the wear mechanism on the worn surface of both samples. The results showed that, the wear resistance of rheocast alloy was improved and higher than that those produce by conventional casting. The volume loss of rheocast alloy show reduc-tion more than 18% at 1.8Km and 10% at 9Km compared to as-cast alloy. Moderate wear regimes were appeared in both alloys, accord-ing to the range of wear rate. The friction coefficient had increased due to increase in the contact point between pin and disc materials. The dominant wear mechanism for conventional and rheocasting alloys was adhesion wear and abrasive wear respectively.
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology
Mechanism of Fracture in Friction Stir Processed Aluminium AlloyDr. Amarjeet Singh
Aluminium alloys are used for important
applications in reducing the weight of the component and
structure particularly associated with transport, marine,
and aerospace fields. Grain refinement by scandium (Sc)
addition can eliminate the casting defects and increase the
resistance to hot tearing for high strength aluminium alloys.
FSP for cast aluminium alloys have been focused and it has
great advantages including solid state microstructural
evolution, altering mechanical properties by optimizing
process parameters. These parameters are tool rotational
speeds (720, and 1000 rpm), traverse speeds (80, and 70
mm/min), and axial compressive force at 15 kN, etc. The
mechanical properties had been evaluated on FSPed
aluminium alloy with different microstructural conditions.
Fracture properties of aluminium alloys are very important
for industrial applications. Tensile and fracture toughness
properties were correlated to microstructural and
fractographic features of the aluminium alloys need to
explore their essential failure mechanisms.
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology
In the present study, coatings were deposited on CrC-NiCrFeSiBCoC(80%-20% )a
Fe based SS316 steel substrate to reduce the damage caused by erosion boiler
applications. Erosion studies were conducted on uncoated as well as HVOF coated steels.
The erosion experiments were carried out using an air-jet erosion test rig according to
ASTM G-76 standard at a velocity of 30 m/s and at different impingement angles of 30°,
60° and 90°. The HVOF spraying leads to a high retention of CrC in the coating matrix
accompanied with lower porosity The high velocity oxy-fuel (HVOF) sprayed CrCNiCrFeSiBCoC(
80%-20% )coatings on 316SS boiler tube steal exhibit composite ductile
or brittle modes of erosion under angular alumina sand erodent of size 50 impacted
at 30m/s. The HVOF spraying leads to a high retention of CrC in the coating matrix
accompanied with lower porosity.
Dry Sliding Wear Behaviour of Rheocat Al-5.7Si-2Cu-0.3Mg AlloyDr. Manal Abdullatif
In this study, the effect of improved microstructure of Al-5.7Si-2Cu-0.3Mg alloys by using semisolid process on hardness and dry sliding wear behaviour were investigated. The microstructures of conventional cast alloy were totally dendritic, while in rheocasting the dendrit-ic transfer to fine globular microstructures after using cooling slope casting. Tribological tests were carried out by using a pin-on-disc apparatus in dry sliding conditions. Wear tests were at low sliding speed 1ms-1 ,applied load at 50N and three different sliding distance (i.e., 1.8Km, 5.4Km and 9Km) respectively. An optical microscope and a scanning electron microscope were used to examine the micro-structure and to understand the wear mechanism on the worn surface of both samples. The results showed that, the wear resistance of rheocast alloy was improved and higher than that those produce by conventional casting. The volume loss of rheocast alloy show reduc-tion more than 18% at 1.8Km and 10% at 9Km compared to as-cast alloy. Moderate wear regimes were appeared in both alloys, accord-ing to the range of wear rate. The friction coefficient had increased due to increase in the contact point between pin and disc materials. The dominant wear mechanism for conventional and rheocasting alloys was adhesion wear and abrasive wear respectively.
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology
Mechanism of Fracture in Friction Stir Processed Aluminium AlloyDr. Amarjeet Singh
Aluminium alloys are used for important
applications in reducing the weight of the component and
structure particularly associated with transport, marine,
and aerospace fields. Grain refinement by scandium (Sc)
addition can eliminate the casting defects and increase the
resistance to hot tearing for high strength aluminium alloys.
FSP for cast aluminium alloys have been focused and it has
great advantages including solid state microstructural
evolution, altering mechanical properties by optimizing
process parameters. These parameters are tool rotational
speeds (720, and 1000 rpm), traverse speeds (80, and 70
mm/min), and axial compressive force at 15 kN, etc. The
mechanical properties had been evaluated on FSPed
aluminium alloy with different microstructural conditions.
Fracture properties of aluminium alloys are very important
for industrial applications. Tensile and fracture toughness
properties were correlated to microstructural and
fractographic features of the aluminium alloys need to
explore their essential failure mechanisms.
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology
In the present study, coatings were deposited on CrC-NiCrFeSiBCoC(80%-20% )a
Fe based SS316 steel substrate to reduce the damage caused by erosion boiler
applications. Erosion studies were conducted on uncoated as well as HVOF coated steels.
The erosion experiments were carried out using an air-jet erosion test rig according to
ASTM G-76 standard at a velocity of 30 m/s and at different impingement angles of 30°,
60° and 90°. The HVOF spraying leads to a high retention of CrC in the coating matrix
accompanied with lower porosity The high velocity oxy-fuel (HVOF) sprayed CrCNiCrFeSiBCoC(
80%-20% )coatings on 316SS boiler tube steal exhibit composite ductile
or brittle modes of erosion under angular alumina sand erodent of size 50 impacted
at 30m/s. The HVOF spraying leads to a high retention of CrC in the coating matrix
accompanied with lower porosity.
The current paper is a report on the preparation and testing of 10 reinforced concrete column specimens of (120x120) mm2 cross section and 1000 mm height, for the experimental clarification of the behavior of columns under the influence of pure axial loads. The research addresses the influences of some parameters and conditions on the mentioned behavior, including concrete type (normal strength, high strength or modified reactive powder concrete), the amount of reinforcement and the percentage of steel fibers. The effects of the above variables on the ultimate capacity, failure mode, stiffness, ductility and axial load-lateral displacement behavior were studied. It has been found that increasing the compressive strength and steel reinforcement ratio lead to increasing the ultimate capacity and stiffness of the tested columns. The effectiveness of increasing the steel fibers ratio is manifest in increasing the ultimate strength, ductility, and decreasing the stiffness and the ductility of the tested columns.
Wear characteristics of pure aluminium, al alloy & al-alumina metal mtrix...eSAT Journals
Abstract In this report, the aluminium metal matrix was reinforced with 1.5 wt. % of Al2O3 nano particles using non-contact cavitation method to prepare the metal matrix nano composite. Microstructural examination conducted on the samples revealed a uniform distribution of alumina particulates. Sliding wear behavior of the as-cast MMNC was studied in dry condition, under different test conditions by varying the load and the sliding velocity, with an unlubricated Multiple Tribo Tester. It was found that resistance to sliding wear improved considerably with the addition of alumina nano particles. Microscopic examinations of the worn out surfaces of pure Al, Al-alloy (duralumin) and MMNC reveal that the MMNC has greater resistance to sliding wear compared to pure aluminium and duralumin. Wear increases with increase in load and sliding velocity. Wear is more when load and speed are increased in steps. Delamination and abrasion are the dominating types of wear observed. Keywords: Sliding Wear, Al2O3, MMNC, Duralumin, Delamination and Abrasion.
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
Wear characteristics of pure aluminium, al alloy & al-alumina metal mtrix...eSAT Journals
Abstract In this report, an aluminium metal matrix was reinforced with 1.5 wt. % of Al2O3 nano particles using non-contact cavitation method to prepare the metal matrix nano composite. Microstructural examination conducted on the sample revealed a uniform distribution of alumina particulates. Sliding wear behavior of the as-cast MMNC was studied in dry condition, under different test conditions by varying the load and the sliding velocity, with an unlubricated Multiple Tribo Tester. It was found that sliding wear resistance improved considerably with the addition of alumina nano particles. Microscopic examinations of the worn out surfaces of pure Al, Al-alloy (duralumin) and MMNC reveal that the MMNC has greater resistance to sliding wear compared to pure aluminium and duralumin. Wear increases with increase in load and sliding velocity. Delamination and abrasion are the dominating types of wear observed. Keywords: Sliding Wear, Al2O3, MMNC, Duralumin, Delamination and Abrasion.
USE OF CFRP LAMINATES FOR STRENGTHENING OF REINFORCED CONCRETE CORBELSIAEME Publication
This work consists of fabrication and testing of sixteen reinforced concrete corbels. Fourteen of these corbels have been strengthened or repaired by various plies of Carbon Fiber Reinforced Polymer (CFRP) laminates. The experimental variables considered in the test program include, the CFRP pattern scheme (i.e. location, orientation, and number of layers), bond type (partial warping, full warping, and using CFRP anchors), and damaged ratio. Two modes of failure were observed, debonding and rupture of the CFRP laminates. Significant increase in ultimate capacity ranging from 17% to 71% was registered in the strengthening specimens and from 13% to 65% in repaired specimens.
Prediction Models for Sliding Wear of AA3003/Al2O3 CompositesIJERA Editor
In the present work, the AA3003/Al2O3 metal matrix composites were manufactured at 10% and 30% volume
fractions of Al2O3. The composites were wear tested at different levels of normal load, sliding speed and sliding
distances. The microstructure of worn surfaces pertaining to AA3003/ Al2O3 composite reveals the fracture of
AA3033 alloy matrix as well as the detachment of Al2O3 particles from the matrix.
The current paper is a report on the preparation and testing of 10 reinforced concrete column specimens of (120x120) mm2 cross section and 1000 mm height, for the experimental clarification of the behavior of columns under the influence of pure axial loads. The research addresses the influences of some parameters and conditions on the mentioned behavior, including concrete type (normal strength, high strength or modified reactive powder concrete), the amount of reinforcement and the percentage of steel fibers. The effects of the above variables on the ultimate capacity, failure mode, stiffness, ductility and axial load-lateral displacement behavior were studied. It has been found that increasing the compressive strength and steel reinforcement ratio lead to increasing the ultimate capacity and stiffness of the tested columns. The effectiveness of increasing the steel fibers ratio is manifest in increasing the ultimate strength, ductility, and decreasing the stiffness and the ductility of the tested columns.
Wear characteristics of pure aluminium, al alloy & al-alumina metal mtrix...eSAT Journals
Abstract In this report, the aluminium metal matrix was reinforced with 1.5 wt. % of Al2O3 nano particles using non-contact cavitation method to prepare the metal matrix nano composite. Microstructural examination conducted on the samples revealed a uniform distribution of alumina particulates. Sliding wear behavior of the as-cast MMNC was studied in dry condition, under different test conditions by varying the load and the sliding velocity, with an unlubricated Multiple Tribo Tester. It was found that resistance to sliding wear improved considerably with the addition of alumina nano particles. Microscopic examinations of the worn out surfaces of pure Al, Al-alloy (duralumin) and MMNC reveal that the MMNC has greater resistance to sliding wear compared to pure aluminium and duralumin. Wear increases with increase in load and sliding velocity. Wear is more when load and speed are increased in steps. Delamination and abrasion are the dominating types of wear observed. Keywords: Sliding Wear, Al2O3, MMNC, Duralumin, Delamination and Abrasion.
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
Wear characteristics of pure aluminium, al alloy & al-alumina metal mtrix...eSAT Journals
Abstract In this report, an aluminium metal matrix was reinforced with 1.5 wt. % of Al2O3 nano particles using non-contact cavitation method to prepare the metal matrix nano composite. Microstructural examination conducted on the sample revealed a uniform distribution of alumina particulates. Sliding wear behavior of the as-cast MMNC was studied in dry condition, under different test conditions by varying the load and the sliding velocity, with an unlubricated Multiple Tribo Tester. It was found that sliding wear resistance improved considerably with the addition of alumina nano particles. Microscopic examinations of the worn out surfaces of pure Al, Al-alloy (duralumin) and MMNC reveal that the MMNC has greater resistance to sliding wear compared to pure aluminium and duralumin. Wear increases with increase in load and sliding velocity. Delamination and abrasion are the dominating types of wear observed. Keywords: Sliding Wear, Al2O3, MMNC, Duralumin, Delamination and Abrasion.
USE OF CFRP LAMINATES FOR STRENGTHENING OF REINFORCED CONCRETE CORBELSIAEME Publication
This work consists of fabrication and testing of sixteen reinforced concrete corbels. Fourteen of these corbels have been strengthened or repaired by various plies of Carbon Fiber Reinforced Polymer (CFRP) laminates. The experimental variables considered in the test program include, the CFRP pattern scheme (i.e. location, orientation, and number of layers), bond type (partial warping, full warping, and using CFRP anchors), and damaged ratio. Two modes of failure were observed, debonding and rupture of the CFRP laminates. Significant increase in ultimate capacity ranging from 17% to 71% was registered in the strengthening specimens and from 13% to 65% in repaired specimens.
Prediction Models for Sliding Wear of AA3003/Al2O3 CompositesIJERA Editor
In the present work, the AA3003/Al2O3 metal matrix composites were manufactured at 10% and 30% volume
fractions of Al2O3. The composites were wear tested at different levels of normal load, sliding speed and sliding
distances. The microstructure of worn surfaces pertaining to AA3003/ Al2O3 composite reveals the fracture of
AA3033 alloy matrix as well as the detachment of Al2O3 particles from the matrix.
How to get newcomers invested in your product/service right away. Discover your 'aha moment' and get to it quickly. The importance of setting small goals that expand into larger ones. Understand how the feedback-cycle drives loyalty.
MICROSTRUCTURAL STUDY AND TRIBOLOGICAL BEHAVIOR OF WC-Co COATINGS ON STAINLES...IAEME Publication
Tungsten Carbide (WC) coatings exhibit high wear resistance at low and high temperatures,WC - Cobalt coatings will demonstrate anti-resistive and wear characteristics better than those of conventional materials. Research in this area has shown that the service life of the WC-Co coatings
depended on varying compositions of tungsten and cobalt.
MICROSTRUCTURAL CHARACTERIZATION AND HOT EROSION BEHAVIOR OF CRC-NICR COATED ...IAEME Publication
Erosion behavior of the High Velocity Oxygen Fuel (HVOF) deposited CrC - NiCr coating on stainless steel was evaluated. Th e solid particle erosion stu dy was conducted using an air jet erosion test rig at a velocity 60m/sec and impingement angle 60 ° , 75 ° and 90 ° , on HVOF spray coated steel at 600 ° C. Microstructure, chemical composition, phases present in the coating on the steel substrate was studied by using Scanning Electron Microscope (SEM) and X - Ray Diffraction method. The Hardness is gradually increasing with increasing content of Cr 3 C 2 particles in all three samples. The erosion mechanism of coatings was also discussed and erosion rate is maximum at impingement angle 75 °
EFFECT OF AL2O3 ON WEAR RESISTANCE IN ALUMINUM MATRIX COMPOSITE PRODUCED BY S...IAEME Publication
Aluminum metal matrix composites are one of the new materials used for various applications due to their less cost and light weight. The present study has been done to study the effect of various composition of Al2O3, wear resistance reinforced in aluminum LM6 alloy. Aluminum alloy LM6 is mostly used in die casting methods to produce various parts used in automobiles etc. For the Experimentation composites of various compositions are manufactured by using stir casting method and dry sliding wear testing machine is used.
Fabrication and mechanical properties of stir cast al si12 cub4c compositeseSAT Publishing House
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology
Effect of cold swaging on the mechanical and microstructure characteristics o...eSAT Journals
Abstract In this experimental investigation, the post sintering mechanical treatment was implemented by cold swaging the produced tungsten alloy rods with composition (90W-7Ni-3Fe %wt) by cold isostatic press with 300 MPa, and appling different reductions of cross sectional area varying from 10% up to 50%. On the mechanical and microstructure properties of the tungsten heavy alloy (89.97W-7Ni-3Fe-0.03 Y2O3 %wt). Elemental powders were mixed for 120 min. Green compacted by cold isostatic press with 300 MPa, and Finally the specimens were sintered at 1480ºC for 90 min under vacuum atmosphere. It was found that the ultimate tensile strength and hardness were remarkably increased by about 39% and 45% respectively, by the application of 50% area reduction by swaging, relative to the sintered specimens. On the other hand, ductility and impact resistance were deeply decreased by about 75% and 53% respectively, by also, the application of 50% area reduction by swaging. Keywords: Cold Swaging, Liquid Phase Sintering, Tungsten Heavy Alloy, Powder Metallurgy.
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology.
SLIDING WEAR OF AA6061/CARBON BLACK METAL MATRIX COMPOSITESIAEME Publication
In this study, the effects of carbon black amount on fracture and wear behaviors of AA6061-carbon black metal matrix composites produced by stir casting route were investigated. Wear tests were performed in a pin on type wear apparatus under different loads of 10, 20, 30 N with different sliding speeds of 2, 3 and 4 m/s, at three different sliding distances of 500, 750 and 1000 m. The design of experiments was carried out as per Taguchi technique. Wear rate function was determined in terms of volume fraction, normal load, sliding speed and sliding distance. It was found that there was a good agreement between the theoretical and the experimental value of wear rate. Maximum sliding wear of 68.72% was attributed sliding distance. Sliding wear resistance increases by 42.56% for AA6061/30%CB metal matrix composites as compared to the matrix alloy AA6061
Wear characteristics of pure aluminium, al alloy & al-alumina metal mtrix...eSAT Journals
Abstract In this report, the aluminium metal matrix was reinforced with 1.5 wt. % of alumina nano particles using non-contact cavitation method to prepare the metal matrix nano composite. Microstructural investigation was conducted on the worn out samples. It showed uniform distribution of alumina particles in the matrix. Sliding wear behavior of the as-cast MMNC was studied in dry condition, under different test conditions by varying the load (constant and step loads) and the sliding speed (constant and step speeds) using a Multiple Tribo Tester. It was found that resistance to sliding wear improved considerably with the addition of alumina nano particles. FESEM images of the worn out surfaces of pure Al, Al-alloy (duralumin) and MMNC reveal that the MMNC has greater resistance to sliding wear compared to pure aluminium and duralumin. Wear rate increases with increase in load and sliding velocity. Wear rate is more when load and speed are increased in steps. Delamination and abrasion are the dominating types of wear observed. Keywords: Wear rate, Al2O3, MMNC, Duralumin. Coefficient of friction.
STRENGTHENING OF NORMAL AND HIGH STRENGTH CONCRETE CORBELS WITH HORIZONTAL AN...IAEME Publication
In this study, there were two modes of applying the carbon fiber strips on reinforced concrete corbels: the first one is application three horizontal strips and its width is (50 mm) and the other is applying three inclined strips with angle about (45°), the both modes applied on the two faces of concrete corbel specimens. Two types of concrete were used in this study; normal strength (28 MPa) and high strength concrete (57 MPa). Each types strengthening with two modes of carbon fiber stripes.
The ultimate and cracking capacity of tested specimens were improved as a result of strengthening with carbon fiber strips, in addition to development of energy absorption and stiffness characteristics.
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology
Study on the effects of ceramic particulates (sic, al2 o3 and cenosphere) on ...eSAT Journals
Abstract This paper investigates the sliding wear behaviour of three different composites. Three different reinforcements are under taken for this study namely SiC, Al2O3 and Cenosphere. Along with it percentage reinforcement is also varied from 8wt% to 16wt.%. Other factors applied normal load and sliding speed are also considered. Taguchi design of experimental technique is employed for the study of sliding wear. It is observed that SiC reinforced composites show better wear resistance than Al2O3 and Cenosphere reinforced composites. Regression and artificial neural network (ANN) is used to develop a model to predict the wear loss. It is observed that artificial neural network is more efficient than regression. Keywords: A. Metal-matrix composites (MMCs); B.Wear; C.Taguchi D. Nueral Network
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology
This paper is done essentially to study results of
Alumina (Al2O3
), Zirconia (ZrO2
) and Alumina-Zirconia
(Al2O3+40%ZrO2
) ceramic coatings by using plasma spray
process, with different coating thickness of 100μm, 150μm and
200μm are deposited on Al-7075T6 substrate. Coating
microstructure were characterized by using SEM. The coating
Micro hardness, Tribological behaviour and Surface Roughness
of the coated specimens were determined for Aluminium (Al-
7075T6) and Coated Al-7075T6. NiCrAl is used as a bond coat
for providing better coating adhesion. Dry sliding wear test were
performed for different sliding distance of 1000m, 2000m, and
3000m at a constant load of 10N by using a Pin-on-Disc. From
the above work the results were obtained it showed that,
Alumina-Zirconia (Al2O3+40%ZrO2
) coated specimens having
very good wear resistance property when compared to
Alumina (Al2O3
), Zirconia (ZrO2
) coating materials. These results
clearly demonstrate that the significant improvement in coating
performance can be achieved by proper thermal spray conditions
and proper mixing of coating powder composition.
Submission Deadline: 30th September 2022
Acceptance Notification: Within Three Days’ time period
Online Publication: Within 24 Hrs. time Period
Expected Date of Dispatch of Printed Journal: 5th October 2022
MODELING AND ANALYSIS OF SURFACE ROUGHNESS AND WHITE LATER THICKNESS IN WIRE-...IAEME Publication
White layer thickness (WLT) formed and surface roughness in wire electric discharge turning (WEDT) of tungsten carbide composite has been made to model through response surface methodology (RSM). A Taguchi’s standard Design of experiments involving five input variables with three levels has been employed to establish a mathematical model between input parameters and responses. Percentage of cobalt content, spindle speed, Pulse on-time, wire feed and pulse off-time were changed during the experimental tests based on the Taguchi’s orthogonal array L27 (3^13). Analysis of variance (ANOVA) revealed that the mathematical models obtained can adequately describe performance within the parameters of the factors considered. There was a good agreement between the experimental and predicted values in this study.
A STUDY ON THE REASONS FOR TRANSGENDER TO BECOME ENTREPRENEURSIAEME Publication
The study explores the reasons for a transgender to become entrepreneurs. In this study transgender entrepreneur was taken as independent variable and reasons to become as dependent variable. Data were collected through a structured questionnaire containing a five point Likert Scale. The study examined the data of 30 transgender entrepreneurs in Salem Municipal Corporation of Tamil Nadu State, India. Simple Random sampling technique was used. Garrett Ranking Technique (Percentile Position, Mean Scores) was used as the analysis for the present study to identify the top 13 stimulus factors for establishment of trans entrepreneurial venture. Economic advancement of a nation is governed upon the upshot of a resolute entrepreneurial doings. The conception of entrepreneurship has stretched and materialized to the socially deflated uncharted sections of transgender community. Presently transgenders have smashed their stereotypes and are making recent headlines of achievements in various fields of our Indian society. The trans-community is gradually being observed in a new light and has been trying to achieve prospective growth in entrepreneurship. The findings of the research revealed that the optimistic changes are taking place to change affirmative societal outlook of the transgender for entrepreneurial ventureship. It also laid emphasis on other transgenders to renovate their traditional living. The paper also highlights that legislators, supervisory body should endorse an impartial canons and reforms in Tamil Nadu Transgender Welfare Board Association.
BROAD UNEXPOSED SKILLS OF TRANSGENDER ENTREPRENEURSIAEME Publication
Since ages gender difference is always a debatable theme whether caused by nature, evolution or environment. The birth of a transgender is dreadful not only for the child but also for their parents. The pain of living in the wrong physique and treated as second class victimized citizen is outrageous and fully harboured with vicious baseless negative scruples. For so long, social exclusion had perpetuated inequality and deprivation experiencing ingrained malign stigma and besieged victims of crime or violence across their life spans. They are pushed into the murky way of life with a source of eternal disgust, bereft sexual potency and perennial fear. Although they are highly visible but very little is known about them. The common public needs to comprehend the ravaged arrogance on these insensitive souls and assist in integrating them into the mainstream by offering equal opportunity, treat with humanity and respect their dignity. Entrepreneurship in the current age is endorsing the gender fairness movement. Unstable careers and economic inadequacy had inclined one of the gender variant people called Transgender to become entrepreneurs. These tiny budding entrepreneurs resulted in economic transition by means of employment, free from the clutches of stereotype jobs, raised standard of living and handful of financial empowerment. Besides all these inhibitions, they were able to witness a platform for skill set development that ignited them to enter into entrepreneurial domain. This paper epitomizes skill sets involved in trans-entrepreneurs of Thoothukudi Municipal Corporation of Tamil Nadu State and is a groundbreaking determination to sightsee various skills incorporated and the impact on entrepreneurship.
DETERMINANTS AFFECTING THE USER'S INTENTION TO USE MOBILE BANKING APPLICATIONSIAEME Publication
The banking and financial services industries are experiencing increased technology penetration. Among them, the banking industry has made technological advancements to better serve the general populace. The economy focused on transforming the banking sector's system into a cashless, paperless, and faceless one. The researcher wants to evaluate the user's intention for utilising a mobile banking application. The study also examines the variables affecting the user's behaviour intention when selecting specific applications for financial transactions. The researcher employed a well-structured questionnaire and a descriptive study methodology to gather the respondents' primary data utilising the snowball sampling technique. The study includes variables like performance expectations, effort expectations, social impact, enabling circumstances, and perceived risk. Each of the aforementioned variables has a major impact on how users utilise mobile banking applications. The outcome will assist the service provider in comprehending the user's history with mobile banking applications.
ANALYSE THE USER PREDILECTION ON GPAY AND PHONEPE FOR DIGITAL TRANSACTIONSIAEME Publication
Technology upgradation in banking sector took the economy to view that payment mode towards online transactions using mobile applications. This system enabled connectivity between banks, Merchant and user in a convenient mode. there are various applications used for online transactions such as Google pay, Paytm, freecharge, mobikiwi, oxygen, phonepe and so on and it also includes mobile banking applications. The study aimed at evaluating the predilection of the user in adopting digital transaction. The study is descriptive in nature. The researcher used random sample techniques to collect the data. The findings reveal that mobile applications differ with the quality of service rendered by Gpay and Phonepe. The researcher suggest the Phonepe application should focus on implementing the application should be user friendly interface and Gpay on motivating the users to feel the importance of request for money and modes of payments in the application.
VOICE BASED ATM FOR VISUALLY IMPAIRED USING ARDUINOIAEME Publication
The prototype of a voice-based ATM for visually impaired using Arduino is to help people who are blind. This uses RFID cards which contain users fingerprint encrypted on it and interacts with the users through voice commands. ATM operates when sensor detects the presence of one person in the cabin. After scanning the RFID card, it will ask to select the mode like –normal or blind. User can select the respective mode through voice input, if blind mode is selected the balance check or cash withdraw can be done through voice input. Normal mode procedure is same as the existing ATM.
IMPACT OF EMOTIONAL INTELLIGENCE ON HUMAN RESOURCE MANAGEMENT PRACTICES AMONG...IAEME Publication
There is increasing acceptability of emotional intelligence as a major factor in personality assessment and effective human resource management. Emotional intelligence as the ability to build capacity, empathize, co-operate, motivate and develop others cannot be divorced from both effective performance and human resource management systems. The human person is crucial in defining organizational leadership and fortunes in terms of challenges and opportunities and walking across both multinational and bilateral relationships. The growing complexity of the business world requires a great deal of self-confidence, integrity, communication, conflict and diversity management to keep the global enterprise within the paths of productivity and sustainability. Using the exploratory research design and 255 participants the result of this original study indicates strong positive correlation between emotional intelligence and effective human resource management. The paper offers suggestions on further studies between emotional intelligence and human capital development and recommends for conflict management as an integral part of effective human resource management.
VISUALISING AGING PARENTS & THEIR CLOSE CARERS LIFE JOURNEY IN AGING ECONOMYIAEME Publication
Our life journey, in general, is closely defined by the way we understand the meaning of why we coexist and deal with its challenges. As we develop the "inspiration economy", we could say that nearly all of the challenges we have faced are opportunities that help us to discover the rest of our journey. In this note paper, we explore how being faced with the opportunity of being a close carer for an aging parent with dementia brought intangible discoveries that changed our insight of the meaning of the rest of our life journey.
A STUDY ON THE IMPACT OF ORGANIZATIONAL CULTURE ON THE EFFECTIVENESS OF PERFO...IAEME Publication
The main objective of this study is to analyze the impact of aspects of Organizational Culture on the Effectiveness of the Performance Management System (PMS) in the Health Care Organization at Thanjavur. Organizational Culture and PMS play a crucial role in present-day organizations in achieving their objectives. PMS needs employees’ cooperation to achieve its intended objectives. Employees' cooperation depends upon the organization’s culture. The present study uses exploratory research to examine the relationship between the Organization's culture and the Effectiveness of the Performance Management System. The study uses a Structured Questionnaire to collect the primary data. For this study, Thirty-six non-clinical employees were selected from twelve randomly selected Health Care organizations at Thanjavur. Thirty-two fully completed questionnaires were received.
Living in 21st century in itself reminds all of us the necessity of police and its administration. As more and more we are entering into the modern society and culture, the more we require the services of the so called ‘Khaki Worthy’ men i.e., the police personnel. Whether we talk of Indian police or the other nation’s police, they all have the same recognition as they have in India. But as already mentioned, their services and requirements are different after the like 26th November, 2008 incidents, where they without saving their own lives has sacrificed themselves without any hitch and without caring about their respective family members and wards. In other words, they are like our heroes and mentors who can guide us from the darkness of fear, militancy, corruption and other dark sides of life and so on. Now the question arises, if Gandhi would have been alive today, what would have been his reaction/opinion to the police and its functioning? Would he have some thing different in his mind now what he had been in his mind before the partition or would he be going to start some Satyagraha in the form of some improvement in the functioning of the police administration? Really these questions or rather night mares can come to any one’s mind, when there is too much confusion is prevailing in our minds, when there is too much corruption in the society and when the polices working is also in the questioning because of one or the other case throughout the India. It is matter of great concern that we have to thing over our administration and our practical approach because the police personals are also like us, they are part and parcel of our society and among one of us, so why we all are pin pointing towards them.
A STUDY ON TALENT MANAGEMENT AND ITS IMPACT ON EMPLOYEE RETENTION IN SELECTED...IAEME Publication
The goal of this study was to see how talent management affected employee retention in the selected IT organizations in Chennai. The fundamental issue was the difficulty to attract, hire, and retain talented personnel who perform well and the gap between supply and demand of talent acquisition and retaining them within the firms. The study's main goals were to determine the impact of talent management on employee retention in IT companies in Chennai, investigate talent management strategies that IT companies could use to improve talent acquisition, performance management, career planning and formulate retention strategies that the IT firms could use. The respondents were given a structured close-ended questionnaire with the 5 Point Likert Scale as part of the study's quantitative research design. The target population consisted of 289 IT professionals. The questionnaires were distributed and collected by the researcher directly. The Statistical Package for Social Sciences (SPSS) was used to collect and analyse the questionnaire responses. Hypotheses that were formulated for the various areas of the study were tested using a variety of statistical tests. The key findings of the study suggested that talent management had an impact on employee retention. The studies also found that there is a clear link between the implementation of talent management and retention measures. Management should provide enough training and development for employees, clarify job responsibilities, provide adequate remuneration packages, and recognise employees for exceptional performance.
ATTRITION IN THE IT INDUSTRY DURING COVID-19 PANDEMIC: LINKING EMOTIONAL INTE...IAEME Publication
Globally, Millions of dollars were spent by the organizations for employing skilled Information Technology (IT) professionals. It is costly to replace unskilled employees with IT professionals possessing technical skills and competencies that aid in interconnecting the business processes. The organization’s employment tactics were forced to alter by globalization along with technological innovations as they consistently diminish to remain lean, outsource to concentrate on core competencies along with restructuring/reallocate personnel to gather efficiency. As other jobs, organizations or professions have become reasonably more appropriate in a shifting employment landscape, the above alterations trigger both involuntary as well as voluntary turnover. The employee view on jobs is also afflicted by the COVID-19 pandemic along with the employee-driven labour market. So, having effective strategies is necessary to tackle the withdrawal rate of employees. By associating Emotional Intelligence (EI) along with Talent Management (TM) in the IT industry, the rise in attrition rate was analyzed in this study. Only 303 respondents were collected out of 350 participants to whom questionnaires were distributed. From the employees of IT organizations located in Bangalore (India), the data were congregated. A simple random sampling methodology was employed to congregate data as of the respondents. Generating the hypothesis along with testing is eventuated. The effect of EI and TM along with regression analysis between TM and EI was analyzed. The outcomes indicated that employee and Organizational Performance (OP) were elevated by effective EI along with TM.
INFLUENCE OF TALENT MANAGEMENT PRACTICES ON ORGANIZATIONAL PERFORMANCE A STUD...IAEME Publication
By implementing talent management strategy, organizations would have the option to retain their skilled professionals while additionally working on their overall performance. It is the course of appropriately utilizing the ideal individuals, setting them up for future top positions, exploring and dealing with their performance, and holding them back from leaving the organization. It is employee performance that determines the success of every organization. The firm quickly obtains an upper hand over its rivals in the event that its employees having particular skills that cannot be duplicated by the competitors. Thus, firms are centred on creating successful talent management practices and processes to deal with the unique human resources. Firms are additionally endeavouring to keep their top/key staff since on the off chance that they leave; the whole store of information leaves the firm's hands. The study's objective was to determine the impact of talent management on organizational performance among the selected IT organizations in Chennai. The study recommends that talent management limitedly affects performance. On the off chance that this talent is appropriately management and implemented properly, organizations might benefit as much as possible from their maintained assets to support development and productivity, both monetarily and non-monetarily.
A STUDY OF VARIOUS TYPES OF LOANS OF SELECTED PUBLIC AND PRIVATE SECTOR BANKS...IAEME Publication
Banking regulations act of India, 1949 defines banking as “acceptance of deposits for the purpose of lending or investment from the public, repayment on demand or otherwise and withdrawable through cheques, drafts order or otherwise”, the major participants of the Indian financial system are commercial banks, the financial institution encompassing term lending institutions. Investments institutions, specialized financial institution and the state level development banks, non banking financial companies (NBFC) and other market intermediaries such has the stock brokers and money lenders are among the oldest of the certain variants of NBFC and the oldest market participants. The asset quality of banks is one of the most important indicators of their financial health. The Indian banking sector has been facing severe problems of increasing Non- Performing Assets (NPAs). The NPAs growth directly and indirectly affects the quality of assets and profitability of banks. It also shows the efficiency of banks credit risk management and the recovery effectiveness. NPA do not generate any income, whereas, the bank is required to make provisions for such as assets that why is a double edge weapon. This paper outlines the concept of quality of bank loans of different types like Housing, Agriculture and MSME loans in state Haryana of selected public and private sector banks. This study is highlighting problems associated with the role of commercial bank in financing Small and Medium Scale Enterprises (SME). The overall objective of the research was to assess the effect of the financing provisions existing for the setting up and operations of MSMEs in the country and to generate recommendations for more robust financing mechanisms for successful operation of the MSMEs, in turn understanding the impact of MSME loans on financial institutions due to NPA. There are many research conducted on the topic of Non- Performing Assets (NPA) Management, concerning particular bank, comparative study of public and private banks etc. In this paper the researcher is considering the aggregate data of selected public sector and private sector banks and attempts to compare the NPA of Housing, Agriculture and MSME loans in state Haryana of public and private sector banks. The tools used in the study are average and Anova test and variance. The findings reveal that NPA is common problem for both public and private sector banks and is associated with all types of loans either that is housing loans, agriculture loans and loans to SMES. NPAs of both public and private sector banks show the increasing trend. In 2010-11 GNPA of public and private sector were at same level it was 2% but after 2010-11 it increased in many fold and at present there is GNPA in some more than 15%. It shows the dark area of Indian banking sector.
EXPERIMENTAL STUDY OF MECHANICAL AND TRIBOLOGICAL RELATION OF NYLON/BaSO4 POL...IAEME Publication
An experiment conducted in this study found that BaSO4 changed Nylon 6's mechanical properties. By changing the weight ratios, BaSO4 was used to make Nylon 6. This Researcher looked into how hard Nylon-6/BaSO4 composites are and how well they wear. Experiments were done based on Taguchi design L9. Nylon-6/BaSO4 composites can be tested for their hardness number using a Rockwell hardness testing apparatus. On Nylon/BaSO4, the wear behavior was measured by a wear monitor, pinon-disc friction by varying reinforcement, sliding speed, and sliding distance, and the microstructure of the crack surfaces was observed by SEM. This study provides significant contributions to ultimate strength by increasing BaSO4 content up to 16% in the composites, and sliding speed contributes 72.45% to the wear rate
ROLE OF SOCIAL ENTREPRENEURSHIP IN RURAL DEVELOPMENT OF INDIA - PROBLEMS AND ...IAEME Publication
The majority of the population in India lives in villages. The village is the back bone of the country. Village or rural industries play an important role in the national economy, particularly in the rural development. Developing the rural economy is one of the key indicators towards a country’s success. Whether it be the need to look after the welfare of the farmers or invest in rural infrastructure, Governments have to ensure that rural development isn’t compromised. The economic development of our country largely depends on the progress of rural areas and the standard of living of rural masses. Village or rural industries play an important role in the national economy, particularly in the rural development. Rural entrepreneurship is based on stimulating local entrepreneurial talent and the subsequent growth of indigenous enterprises. It recognizes opportunity in the rural areas and accelerates a unique blend of resources either inside or outside of agriculture. Rural entrepreneurship brings an economic value to the rural sector by creating new methods of production, new markets, new products and generate employment opportunities thereby ensuring continuous rural development. Social Entrepreneurship has the direct and primary objective of serving the society along with the earning profits. So, social entrepreneurship is different from the economic entrepreneurship as its basic objective is not to earn profits but for providing innovative solutions to meet the society needs which are not taken care by majority of the entrepreneurs as they are in the business for profit making as a sole objective. So, the Social Entrepreneurs have the huge growth potential particularly in the developing countries like India where we have huge societal disparities in terms of the financial positions of the population. Still 22 percent of the Indian population is below the poverty line and also there is disparity among the rural & urban population in terms of families living under BPL. 25.7 percent of the rural population & 13.7 percent of the urban population is under BPL which clearly shows the disparity of the poor people in the rural and urban areas. The need to develop social entrepreneurship in agriculture is dictated by a large number of social problems. Such problems include low living standards, unemployment, and social tension. The reasons that led to the emergence of the practice of social entrepreneurship are the above factors. The research problem lays upon disclosing the importance of role of social entrepreneurship in rural development of India. The paper the tendencies of social entrepreneurship in India, to present successful examples of such business for providing recommendations how to improve situation in rural areas in terms of social entrepreneurship development. Indian government has made some steps towards development of social enterprises, social entrepreneurship, and social in- novation, but a lot remains to be improved.
OPTIMAL RECONFIGURATION OF POWER DISTRIBUTION RADIAL NETWORK USING HYBRID MET...IAEME Publication
Distribution system is a critical link between the electric power distributor and the consumers. Most of the distribution networks commonly used by the electric utility is the radial distribution network. However in this type of network, it has technical issues such as enormous power losses which affect the quality of the supply. Nowadays, the introduction of Distributed Generation (DG) units in the system help improve and support the voltage profile of the network as well as the performance of the system components through power loss mitigation. In this study network reconfiguration was done using two meta-heuristic algorithms Particle Swarm Optimization and Gravitational Search Algorithm (PSO-GSA) to enhance power quality and voltage profile in the system when simultaneously applied with the DG units. Backward/Forward Sweep Method was used in the load flow analysis and simulated using the MATLAB program. Five cases were considered in the Reconfiguration based on the contribution of DG units. The proposed method was tested using IEEE 33 bus system. Based on the results, there was a voltage profile improvement in the system from 0.9038 p.u. to 0.9594 p.u.. The integration of DG in the network also reduced power losses from 210.98 kW to 69.3963 kW. Simulated results are drawn to show the performance of each case.
APPLICATION OF FRUGAL APPROACH FOR PRODUCTIVITY IMPROVEMENT - A CASE STUDY OF...IAEME Publication
Manufacturing industries have witnessed an outburst in productivity. For productivity improvement manufacturing industries are taking various initiatives by using lean tools and techniques. However, in different manufacturing industries, frugal approach is applied in product design and services as a tool for improvement. Frugal approach contributed to prove less is more and seems indirectly contributing to improve productivity. Hence, there is need to understand status of frugal approach application in manufacturing industries. All manufacturing industries are trying hard and putting continuous efforts for competitive existence. For productivity improvements, manufacturing industries are coming up with different effective and efficient solutions in manufacturing processes and operations. To overcome current challenges, manufacturing industries have started using frugal approach in product design and services. For this study, methodology adopted with both primary and secondary sources of data. For primary source interview and observation technique is used and for secondary source review has done based on available literatures in website, printed magazines, manual etc. An attempt has made for understanding application of frugal approach with the study of manufacturing industry project. Manufacturing industry selected for this project study is Mahindra and Mahindra Ltd. This paper will help researcher to find the connections between the two concepts productivity improvement and frugal approach. This paper will help to understand significance of frugal approach for productivity improvement in manufacturing industry. This will also help to understand current scenario of frugal approach in manufacturing industry. In manufacturing industries various process are involved to deliver the final product. In the process of converting input in to output through manufacturing process productivity plays very critical role. Hence this study will help to evolve status of frugal approach in productivity improvement programme. The notion of frugal can be viewed as an approach towards productivity improvement in manufacturing industries.
A MULTIPLE – CHANNEL QUEUING MODELS ON FUZZY ENVIRONMENTIAEME Publication
In this paper, we investigated a queuing model of fuzzy environment-based a multiple channel queuing model (M/M/C) ( /FCFS) and study its performance under realistic conditions. It applies a nonagonal fuzzy number to analyse the relevant performance of a multiple channel queuing model (M/M/C) ( /FCFS). Based on the sub interval average ranking method for nonagonal fuzzy number, we convert fuzzy number to crisp one. Numerical results reveal that the efficiency of this method. Intuitively, the fuzzy environment adapts well to a multiple channel queuing models (M/M/C) ( /FCFS) are very well.
Essentials of Automations: The Art of Triggers and Actions in FMESafe Software
In this second installment of our Essentials of Automations webinar series, we’ll explore the landscape of triggers and actions, guiding you through the nuances of authoring and adapting workspaces for seamless automations. Gain an understanding of the full spectrum of triggers and actions available in FME, empowering you to enhance your workspaces for efficient automation.
We’ll kick things off by showcasing the most commonly used event-based triggers, introducing you to various automation workflows like manual triggers, schedules, directory watchers, and more. Plus, see how these elements play out in real scenarios.
Whether you’re tweaking your current setup or building from the ground up, this session will arm you with the tools and insights needed to transform your FME usage into a powerhouse of productivity. Join us to discover effective strategies that simplify complex processes, enhancing your productivity and transforming your data management practices with FME. Let’s turn complexity into clarity and make your workspaces work wonders!
Smart TV Buyer Insights Survey 2024 by 91mobiles.pdf91mobiles
91mobiles recently conducted a Smart TV Buyer Insights Survey in which we asked over 3,000 respondents about the TV they own, aspects they look at on a new TV, and their TV buying preferences.
Securing your Kubernetes cluster_ a step-by-step guide to success !KatiaHIMEUR1
Today, after several years of existence, an extremely active community and an ultra-dynamic ecosystem, Kubernetes has established itself as the de facto standard in container orchestration. Thanks to a wide range of managed services, it has never been so easy to set up a ready-to-use Kubernetes cluster.
However, this ease of use means that the subject of security in Kubernetes is often left for later, or even neglected. This exposes companies to significant risks.
In this talk, I'll show you step-by-step how to secure your Kubernetes cluster for greater peace of mind and reliability.
Generative AI Deep Dive: Advancing from Proof of Concept to ProductionAggregage
Join Maher Hanafi, VP of Engineering at Betterworks, in this new session where he'll share a practical framework to transform Gen AI prototypes into impactful products! He'll delve into the complexities of data collection and management, model selection and optimization, and ensuring security, scalability, and responsible use.
Removing Uninteresting Bytes in Software FuzzingAftab Hussain
Imagine a world where software fuzzing, the process of mutating bytes in test seeds to uncover hidden and erroneous program behaviors, becomes faster and more effective. A lot depends on the initial seeds, which can significantly dictate the trajectory of a fuzzing campaign, particularly in terms of how long it takes to uncover interesting behaviour in your code. We introduce DIAR, a technique designed to speedup fuzzing campaigns by pinpointing and eliminating those uninteresting bytes in the seeds. Picture this: instead of wasting valuable resources on meaningless mutations in large, bloated seeds, DIAR removes the unnecessary bytes, streamlining the entire process.
In this work, we equipped AFL, a popular fuzzer, with DIAR and examined two critical Linux libraries -- Libxml's xmllint, a tool for parsing xml documents, and Binutil's readelf, an essential debugging and security analysis command-line tool used to display detailed information about ELF (Executable and Linkable Format). Our preliminary results show that AFL+DIAR does not only discover new paths more quickly but also achieves higher coverage overall. This work thus showcases how starting with lean and optimized seeds can lead to faster, more comprehensive fuzzing campaigns -- and DIAR helps you find such seeds.
- These are slides of the talk given at IEEE International Conference on Software Testing Verification and Validation Workshop, ICSTW 2022.
Encryption in Microsoft 365 - ExpertsLive Netherlands 2024Albert Hoitingh
In this session I delve into the encryption technology used in Microsoft 365 and Microsoft Purview. Including the concepts of Customer Key and Double Key Encryption.
Climate Impact of Software Testing at Nordic Testing DaysKari Kakkonen
My slides at Nordic Testing Days 6.6.2024
Climate impact / sustainability of software testing discussed on the talk. ICT and testing must carry their part of global responsibility to help with the climat warming. We can minimize the carbon footprint but we can also have a carbon handprint, a positive impact on the climate. Quality characteristics can be added with sustainability, and then measured continuously. Test environments can be used less, and in smaller scale and on demand. Test techniques can be used in optimizing or minimizing number of tests. Test automation can be used to speed up testing.
zkStudyClub - Reef: Fast Succinct Non-Interactive Zero-Knowledge Regex ProofsAlex Pruden
This paper presents Reef, a system for generating publicly verifiable succinct non-interactive zero-knowledge proofs that a committed document matches or does not match a regular expression. We describe applications such as proving the strength of passwords, the provenance of email despite redactions, the validity of oblivious DNS queries, and the existence of mutations in DNA. Reef supports the Perl Compatible Regular Expression syntax, including wildcards, alternation, ranges, capture groups, Kleene star, negations, and lookarounds. Reef introduces a new type of automata, Skipping Alternating Finite Automata (SAFA), that skips irrelevant parts of a document when producing proofs without undermining soundness, and instantiates SAFA with a lookup argument. Our experimental evaluation confirms that Reef can generate proofs for documents with 32M characters; the proofs are small and cheap to verify (under a second).
Paper: https://eprint.iacr.org/2023/1886
GDG Cloud Southlake #33: Boule & Rebala: Effective AppSec in SDLC using Deplo...James Anderson
Effective Application Security in Software Delivery lifecycle using Deployment Firewall and DBOM
The modern software delivery process (or the CI/CD process) includes many tools, distributed teams, open-source code, and cloud platforms. Constant focus on speed to release software to market, along with the traditional slow and manual security checks has caused gaps in continuous security as an important piece in the software supply chain. Today organizations feel more susceptible to external and internal cyber threats due to the vast attack surface in their applications supply chain and the lack of end-to-end governance and risk management.
The software team must secure its software delivery process to avoid vulnerability and security breaches. This needs to be achieved with existing tool chains and without extensive rework of the delivery processes. This talk will present strategies and techniques for providing visibility into the true risk of the existing vulnerabilities, preventing the introduction of security issues in the software, resolving vulnerabilities in production environments quickly, and capturing the deployment bill of materials (DBOM).
Speakers:
Bob Boule
Robert Boule is a technology enthusiast with PASSION for technology and making things work along with a knack for helping others understand how things work. He comes with around 20 years of solution engineering experience in application security, software continuous delivery, and SaaS platforms. He is known for his dynamic presentations in CI/CD and application security integrated in software delivery lifecycle.
Gopinath Rebala
Gopinath Rebala is the CTO of OpsMx, where he has overall responsibility for the machine learning and data processing architectures for Secure Software Delivery. Gopi also has a strong connection with our customers, leading design and architecture for strategic implementations. Gopi is a frequent speaker and well-known leader in continuous delivery and integrating security into software delivery.
Observability Concepts EVERY Developer Should Know -- DeveloperWeek Europe.pdfPaige Cruz
Monitoring and observability aren’t traditionally found in software curriculums and many of us cobble this knowledge together from whatever vendor or ecosystem we were first introduced to and whatever is a part of your current company’s observability stack.
While the dev and ops silo continues to crumble….many organizations still relegate monitoring & observability as the purview of ops, infra and SRE teams. This is a mistake - achieving a highly observable system requires collaboration up and down the stack.
I, a former op, would like to extend an invitation to all application developers to join the observability party will share these foundational concepts to build on:
Pushing the limits of ePRTC: 100ns holdover for 100 daysAdtran
At WSTS 2024, Alon Stern explored the topic of parametric holdover and explained how recent research findings can be implemented in real-world PNT networks to achieve 100 nanoseconds of accuracy for up to 100 days.
A tale of scale & speed: How the US Navy is enabling software delivery from l...sonjaschweigert1
Rapid and secure feature delivery is a goal across every application team and every branch of the DoD. The Navy’s DevSecOps platform, Party Barge, has achieved:
- Reduction in onboarding time from 5 weeks to 1 day
- Improved developer experience and productivity through actionable findings and reduction of false positives
- Maintenance of superior security standards and inherent policy enforcement with Authorization to Operate (ATO)
Development teams can ship efficiently and ensure applications are cyber ready for Navy Authorizing Officials (AOs). In this webinar, Sigma Defense and Anchore will give attendees a look behind the scenes and demo secure pipeline automation and security artifacts that speed up application ATO and time to production.
We will cover:
- How to remove silos in DevSecOps
- How to build efficient development pipeline roles and component templates
- How to deliver security artifacts that matter for ATO’s (SBOMs, vulnerability reports, and policy evidence)
- How to streamline operations with automated policy checks on container images