Learn how to make this lovely necklace with a few basic jewelry supplies, such as silver chain and crystal beads. It’s fun and easy, and totally ready for customization!
6. Step 4:
Continue doing this with all
the smaller beads. I had 32
dangles. I also skipped a link
between each dangle to make
it sit nicely.
7. Step 5:
Attach the second length of
chain to an open link, next to
the last dangle.
8. Step 6:
With the larger beads, continue
making dangles and attaching them
the same way to the second length
of chain. I had 23 larger dangles. I
attached these to every fourth link
skipping three links skipping three
links in between. Attach the end of
the second length of chain to an
open link next to the last dangle of
the first piece.
9. Step 7:
Last, you add the clasp– I
prefer to use toggle clasps.
And you’re done!
Hinweis der Redaktion
1. Thread a bead onto a headpin. Bend the headpin above the bead at a 90 degree angle.
2. Trim the end to about ½ of an inch. Begin forming the loop with the end.
3. Before closing the loop, attach it to a link in the chain. Now, close the loop.
4. Continue doing this with all the smaller beads. I had 32 dangles. I also skipped a link between each dangle to make it sit nicely.
5. Attach the second length of chain to an open link, next to the last dangle.
7. Now, you can add the clasp. I prefer to use toggle clasps.
7. Now, you can add the clasp. I prefer to use toggle clasps.