1. Get Homework/Assignment Done
Homeworkping.com
Homework Help
https://www.homeworkping.com/
Research Paper help
https://www.homeworkping.com/
Online Tutoring
https://www.homeworkping.com/
click here for freelancing tutoring sites
MECHANICAL ENGINEERING DEPARTMENT
JF310 – MATERIAL TECHNOLOGY
CASE STUDY
DIPLOMA IN MECHATRONIC ENGINEERING
2. INTRODUCTION
Underwater Pipeline
PetronasCarigaliSdnBhd Company (inspection department) at Labuan,Sabah are looking for company to
take the responsibility for project underwater pipelines which is need to be secure in safety and skills in
inspection field that lead to solving the problem,the measurements and operation of underwater pipelines.
So, in order to get the project our company send a proposal that fulfil all the requirements
About our company
Company name Sutra Corporation SDN BHD
Address JalanGerunggung, Taman Sempelang, 88200 Kotakinabalu Sabah
Experienced -8 years since the company founded by our chairman company in underwater pipelines
-cooperate with many big company to do a project
-ready to cooperate at any time when the company are needed
-our company never receive any complaint from clients about the project we made since
past 8 years ago
Achievement -Top 5 for best company in designing,services and efficiency of work between all the
competitor
-Awarded for best services among all the company
3. -establish many design of underwater pipelines
Speciality -Expert in inspection field
-can solve any problem related to underwater pipelines
-concern with the environment while considering to cooperate with company
-alert on time
-offer a good price to our clients based on the substances are use,the risk and benefits
-we have workers from Russia and China who are expert in inspection field
Moto “ENVIRONMENT, FAST, EFFICIENT”
4. PROBLEM STATEMENT
As we know, Petronas Carigali Sdn Bhd Company are looking for company that have potential to give a
good service to solve the problem they got. So,it is the pipelines underwater that need to be improvised and
restored perfectly beyond our company’sability. As our company is very experienced in the job offered
which is inspection field and can provide or managing the operation of piping of underwater,we want to
give a try in operating the underwater pipelines services.
OBJECTIVES
There is some objective we want to achieve in our project such as
i. To make sure the pipe did not have any damage to the whole pipe system.
ii. To carry out regular testing upon the pipeby using our testing pipe produces.
iii. To make inspection on the pipe system twice a weeks.
iv. To measure the pipe every single metre by using the sutaible testing.
5. SCOPE
1. Our company will test the pipe with a suitable test.
2. The problem will be inspect and solution of the problem will be reseach.
3. Develop our testing measurement based on flaw detection system.
4. If the pipe can be repair, it will be repair by underwater welding.
5. If the pipe cannot be repair, there will be many procedure to the pipe.
ANALYSIS
The test that will be conduct to inspect the pipe system is ultrasonic inspection.
There are two methods of receiving the ultrasound waveform, reflection and attenuation. In reflection
(or pulse-echo) mode, the transducer performs both the sending and the receiving of the pulsed
waves as the "sound" is reflected back to the device.
Reflected ultrasound comes from an interface, such as the back wall of the object or from an
imperfection within the object. The diagnostic machine displays these results in the form of a signal
with an amplitude representing the intensity of the reflection and the distance, representing the arrival
time of the reflection.
In attenuation (or through-transmission) mode, a transmitter sends ultrasound through one surface,
and a separate receiver detects the amount that has reached it on another surface after traveling
through the medium.
Imperfections or other conditions in the space between the transmitter and receiver reduce the
amount of sound transmitted, thus revealing their presence. Using the couplant increases the
efficiency of the process by reducing the losses in the ultrasonic wave energy due to separation
between the surfaces.
6. DISCUSSION
With our ultrasonic flaw detection, we know the flaw happening at which part of the pipe have flaw. We
also show the example of the examinate the material in which degree and the example of the result that
state the flaw happening in the pipe or materials.
7. Conclusion
We will carries out the project same as our objective. If we detected the flaw we will research either we
repaired it or make a replacement for the flaw pipe that we found. In order for the safety and health, we
also provides the safety percaution at each metre of the pipe and by using our tester.
