1.  Detail Engineering for Skid Design for Process Packages
 Static Design for Pressure Vessels, Filters,
 Heat Exchangers &Reactors
 Front End Engineering Design for FPSO and FLNG
 Pre Bid Engineering Support for EPC companies
 Conceptual & FEED Study, Process Design and Simulation
 Dynamic Simulation, Structural Design for Jackets & Topsides
 Detail Engineering for both Onshore & Offshore Platforms.
 Engineering Modules , Project Management & HAZOP Study
You’re Partner for Extreme Engineering  Quality Concept, Specialty Inspection & Validation Services.
10 Years of Quality Engineering
SKID DESIGN
FRONT END ENGINEERING
DESIGN
QUALITY CONCEPTS &
VALIDATION
PROCESS PACKAGES

2. About Offshore Engineering
Offshore Engineering is a 10 Year young engineering design company based out of Mumbai, India,
focused on providing SKID Design Engineering services to Upstream and Downstream Oil and Gas sector.
Offshore Engineering has end-to-end capability and experience to provide SKID Design Engineering
services for Upstream and Downstream Oil and Gas companies.
Mission
Offshore Engineering is committed to become a leading
offshore engineering organization in both domestic and
growing international markets by providing competent
and competitive, full-service Engineering and Project
Management capabilities. Vision
Offshore Engineering to become a Full-
Core Values Service, Energy & Utility Engineering &
Project Organization by 2015 employing
Valuing People over 1000 people and serving Domestic &
International markets.”
Accountability
Leadership
Understanding Client’s Needs
Enterprising

3. What We Offer….
Static and Skid Design
Pressure Vessel Design
Heat Exchangers (Shell & Tube type including
Thermal Design -Manual)
Filters & Strainers
Structural Design
Skid Design complete with mechanical
calculations
Piping calculations, Stress Analysis
Structural Design , 3D modeling , E&I Design
with control panel
JB , logic diagrams , loop drawings , Single line
diagram
Drafting for complete platform.
Front End Engineering Design
FEL-1
Material balance
Energy balance
Project charter
FEL-2
Preliminary equipment design
Preliminary layout
Preliminary schedule
Preliminary estimate
FEL-3
Purchase-ready major equipment
specifications
Definitive estimate
Project execution plan
Preliminary 3-D model
Electrical equipment list
Line list
Key Projects Quality Concepts & Validation
Coarse Sea Water Filtration Skid for an
Quality Control and Inspection Services.
Offshore Process Platform (2 to 3 numbers)
Consultant in WPS PQR and all welding
Chemical injection Skid i.e. Methanol requirements.
Chemical Injection Skid ( 8 to 10 Numbers) Consultant for all types of painting and Coating
Fuel Gas Conditioning Systems (3 numbers ) requirements.
Inspection during Jacket and Deck Installation,
Sub Sea Lines etc…

4. Coarse Sea Water Filtration Skid for an Offshore
Case Study Process Platform (2 to 3 numbers)
Complete Skid was designed for a process
company based in Europe. .The complete
detail engineering including E&I was executed
except for the process design.
Scope of Work:
Structural Design:
Using STAAD PRO software and the whole
structure is designed for seismic & wind load
calculations were also involved.
Pressure Vessel Design:
U stamp Coded Design using VES / CODEX
Software.
Skid Layout & Design
E& I Design
3D Modeling using PDMS
Pipe Stress Analysis
Stress Analysis using CEASER package.
Structural Design:
Using STAAD PRO, seismic & wind load
calculations were also involved.
Flow Rate : 1500 m3/hr
Weight : 50 Tonnes
Filtration Capacity : 80 microns
Man Hours : 1200 hrs
Duration : 12 Weeks

5. Chemical injection Skid: Methanol Chemical
Case Study Injection Skid (8 to 10 Numbers)
Complete skid was designed drafted &built
for a process company based in Europe.
Scope of work involved complete detail
engineering except for the process design.
Scope of Work:
Structural Design:
Using STAAD PRO Software along with lifting
Analysis, Seismic & Wind load calculations were
also involved
Pressure Vessel Design:
U stamp Coded Design using PV Elite
Skid Layout & Design
E& I Design
3D Modeling using PDMS
Pipe Stress Analysis
Stress Analysis using CEASER package.
Structural Design:
Using STAAD PRO, seismic & wind load
calculations were also involved.
Weight : 25 Tonnes
Man Hours : 750 Hrs
Duration : 6 Weeks

6. Case Study Fuel Gas Conditioning Systems: 3 Numbers
Complete skid was designed drafted and built
for a process company based in Europe.
Scope of work involved complete detail
engineering except for the process design.
Scope of Work:
Structural Design:
Using STAAD PRO Software along with lifting
Analysis, Seismic & Wind load calculations were
also involved
Pressure Vessel Design:
U stamp Coded Design using PV Elite
Software.
Coarse and Fine Filter Design
Skid Layout & Design
E& I Design
3D Modeling using PDMS
Pipe Stress Analysis
Stress Analysis using CEASER package.
Weight : 125 Tonnes
Man Hours : 1600 Hrs
Duration : 12Weeks

7. Facilities and Infrastructure
Software Infrastructure
VES Calculation (Mech Design -PV,
Pro E (3D) CEASAR PLANT 4 D
HX & Filters , Nozzle Load calc)
CODEX Software PV-ELITE STAAD PRO ACAD Version 2012
(Mechanical Design)
*All Trademarks, Logos & Names are copyrighted and belong to their respective organizations.

8. Contact Information
India Middle East
Mumbai
Kingdom of Saudi Arabia
3/17 Deep Jothi CHS Rajajipath
C/O NAHJ AL SAUDIA EST
Ramnagar
Dombivi East, Thane District AL-Khobar, Saudi Arabia.
Maharashtra 421201 Mobile: +966-504-810-935
Mobile: +91-9819321209
info@offshore-engineering.in
info@offshore-engineering.in
Chennai
Shanti Colony, Saligramam
Chennai-93
India
info@offshore-engineering.in
Bangalore
264, 6th Cross , Canara Bank Colony
Vijaynagar
Bangalore-72
Mobile: +91-9886693861
info@offshore-engineering.in