2. PTOSIS CRUTCH
THE CRUTCH IS THE FORMED WIRE
MOUNTED TO THE UPPER RIMS OF THE
GLASS
3. Ptosis spectacles are equipped with a crutch
that is positioned behind and roughly parallel
to the upper eye wire.
The crutch supports the skin of the upper lid &
prevents the lid from drooping closed.
4.
5. Metal frames can be fitted as ptosis spectacles.
(using flexible wire as a mock-up to show the
basic shape, then constructed from the model).
The crutch is formed to the shape & contour of
the eye, using a type of stainless steel wire.
6. The new ptosis crutch helps those with
“droopy eye lids” function normally……
this life style changing appliance allows
droopy eyelids to stay focus & opened, yet
still allowing flexibility for blinking
7. Crutches are made & distributed
exclusively through ; eyeglass repair for
soldering & repair or more.
We customize every pair ptosis crutches
are coated stainless steel wire formed to
contour the individuals need.
8. Opticians measures each individual to enable
the eyelids to remain open in a relaxed state ,
enabling the individual to close the lid when
needed : there by , allowing the user to.
11. #. With the glass being worn in a normal
comfortable position .
#. The measurements are taken from the
most inner part of the eye lid right on top
Just below the skull bone , right up against
top of the socket ,at the center of the top
of the eye ball.
12. #. The inner upper wire of the eye glass frames
closest to the eye .
#. Center on each eye b/w the bridge in the
middle & the temple mount.
13. The frame should be made of metal ,not
plastic if possible ,once the crutch is
attached apply the outer protective
coating,& give a final adjustment..
Basically that is how it is done