www.envimart.vn - ĐT: 028 77727979 - sales@envimart.vn - Nền tảng cung cấp thiết bị, vật tư ngành nước và môi trường. Chuyên cung cấp vật tư cho dự án xử lý nước sạch, nước thải và môi trường. Envimart luôn đồng hành, tin cậy với đối tác nhà thầu, nhà tích hợp và người sử dụng.
Role of Copper and Zinc Nanoparticles in Plant Disease Management
09-0028 SDS-Mixed.pdf
1. Analytical Technology, Inc. 09-0028 Fluoride Buffer SDS
Revised: 7/2016 1 of 5
Safety Data Sheet
SECTION 1: IDENTIFICATION
1.1 Product Identifier:
Product Name: Fluoride Monitor Buffer
Part Number: 09-0028
Product Form: Mixture
1.2 Recommended Use:
For use with ATI on-line fluoride ion monitors
1.3 Manufacturer's Name and Address:
Analytical Technology, Inc.
6 Iron Bridge Drive
Collegeville, PA 19426
U.S.A..
www.analyticaltechnology.com
Emergency Phone Number: 610-917-0991
Information Phone Number: 610-917-0991
SECTION 2: HAZARDS IDENTIFICATION
2.1 Classification of Chemical
This product is not classified according to the Globally Harmonized System (GHS).
2.2 Label Elements
GHS Label Elements: Not Applicable
GHS Pictograms: Not Applicable
Signal Word: Not Applicable
Hazard Statements: Not Applicable
2.3 Other Hazards
No other hazards have been identified.
SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS
3.1 Mixture
Component Cass No. Concentration GHS-US Classification
Sodium Acetate
Trihydrate
6131-90-4 27% Non-hazardous
Vinegar 0000064-19-7 63% Non-hazardous
2. Analytical Technology, Inc. 09-0028 Fluoride Buffer SDS
Revised: 7/2016 2 of 5
SECTION 4: FIRST AID MEASURES
4.1 Description of first aid measures.
General: Rinse affected area with water if irritation occurs.
Eye Contact: Rinse cautiously with water for several minutes. Contact a doctor for further instructions if
irritation occurs.
Skin Contact: Flush with water. Call a physician if irritation develops.
Inhalation: Remove to fresh air. Give artificial respiration if necessary. If breathing is difficult, give
oxygen. Seek medical attention.
Ingestion: Seek immediate medical attention.
4.2 Most Important Symptoms, both acute and delayed.
May cause irritation to skin or eyes.
4.3 Indication of immediate medical attention and special treatment needs.
No additional information is available.
SECTION 5: FIRE-FIGHTING MEASURES
5.1 Extinguishing Media
Product is not flammable. Use fire-fighting measures that suit the situation.
5.2 Specific hazards arising from the product.
No special hazards from thermal decomposition.
5.3 Advise for fire fighters
Wear self-contained breathing apparatus.
Wear fully protective impervious suit.
SECTION 6: ACCIDENTAL RELEASE
6.1 Personal precautions, protective equipment and emergency procedures
Wear protective equipment. Keep unprotected persons away.
Ensure adequate ventilation.
6.2 Environmental Precautions
Avoid release to the environment without required government permits.
6.3 Methods and materials for containment and clean up.
Absorb with suitable material and dispose of in accordance with local regulations.
Small amounts may be flushed to the sewer with excess water.
3. Analytical Technology, Inc. 09-0028 Fluoride Buffer SDS
Revised: 7/2016 3 of 5
SECTION 7: HANDLING AND STORAGE
7.1 Precautions for safe handling.
Keep container tightly sealed.
Ensure good ventilation in the workplace.
7.1 Conditions for safe storage, including any chemical incompatibilities.
Keep in the original container in a cool, well ventilated place. Keep container closed when not in use.
Do not store near incompatible materials including strong oxidizers or strong bases.
SECTIION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION
8.1 Control Parameters
Acetic Acid 5% (0000064-19-7)
USA ACGIH ACGIH TWA & STEL 10 ppm & 15 ppm
USA OSHA OSHA PEL (TWA) (mg/m³) 25 mg/m³ (10 ppm)
8.2 Exposure Controls
Engineering Controls: Provide exhaust ventilation or other engineering controls to keep airborne
concentrations of vapors below threshold limit value.
Respiratory Protection: Normal room ventilation is adequate.
Skin Protection: Chemical resistant gloves may be used.
Eye Protection: Safety glasses
SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES.
9.1 Information on basic physical and chemical properties
Appearance: Clear, Colorless Liquid
Odor: Mild vinegar odor
Odor Threshold: No data available
pH: 5.4
Boiling Point (˚C): Approximately 100
Melting Point (˚C): Approximately 0
Flash Point: None
Evaporation Rate: Not determined
Flammability,solid/gas None
LEL & UEL None
Vapor Pressure: Not determined.
Vapor Density: Not determined
Relative Density Not determined
Solubility in Water: Infinite
Partition Coefficient Not determined
Decomposition Temp. Not determined
9.2 Other Information
No further relevant information is available.
4. Analytical Technology, Inc. 09-0028 Fluoride Buffer SDS
Revised: 7/2016 4 of 5
SECTION 10 STABILITY AND REACTIVITY
10.1 Reactivity
Product is reactive only under unusual conditions.
10.2 Stability
Product is stable when stored and used as directed.
10.3 Possible hazardous reactions
Product can react with strong bases producing heat.
Product can react strong oxidizing agents.
Product can react violently with alkali metals.
10.4 Conditions to avoid
Avoid using product except for its intended use. Refer to item 1.2.
10.5 Incompatible materials
Strong bases and strong oxidizing agents.
10.6 Hazardous decomposition products
Thermal decomposition will not occur under normal conditions.
SECTION 11: TOXICOLOGICAL INFORMATION
11.1 Information on toxicological effects
Acute Toxicity: The RTECS contains acute toxicity data for this substance
Acetic Acid: Oral LD50, 3310 mg/kg (Rat)
Dermal LD50: No data.
LC50 Inhalation: 16,000, Rat
11.2 Delayed and immediate effects as well as chronic effects from short and long-term exposure
Skin Irritation: May cause skin irritation.
Eye Irritation: May cause eye irritation.
Sensitivity: No sensitizing effects known.
Specific target organ toxicity (repeated exposure): Not classified
Carcinogenicity:No classification data on carcinogenic properties of components is available from EPA,
IARC, NTP, OSHA, or ACGIH.
Mutagenic Effects: No known effects.
Reproductive Effects: No known effects.
Developmental Effects: No known effects
11.3 Other Information
The RTECS contains additional information on the minor component of this product.
5. Analytical Technology, Inc. 09-0028 Fluoride Buffer SDS
Revised: 7/2016 5 of 5
SECTION 12: ECOLOGICAL INFORMATION
12.1 General Information
Ecotoxicity: No information available
Persistence and Degradability: No information available
Bioaccumulation/Accumulation: No information available.
Mobility: No information available.
12.2 Other Ecological Information
Do not allow large quantities of product to reach ground water.
Do not allow undiluted or large quantities of product to be released into the environment.
Do not allow large quantities of product to contaminate drinking water.
SECTION 13: DISPOSAL CONSIDERATIONS
Consult national, regional, and local regulations regarding proper disposal methods.
Rinse empty container with tap water and discard in plastic recycling container.
SECTION 14: TRANSPORT INFORMATION
DOT / TDG / IATA / IMDG/IMO
UN-Number Not Applicable
Shipping Name: Not Applicable
Technical name: Acetate Buffer, pH 5.4
Hazard Class: Not Applicable
Packing Group: Not Applicable
REGULATORY INFORMATION
Federal and State Regulations: All components are listed in the U.S. EPA TSC substance inventory.
OSHA Status: Hazardous by definition of Hazard Communication Standard (29 CFR
1910.1200)
WHMIS Information (Canada): All components are listed on the Canadian DSL.
DSCL (EEC) None of the ingredients is listed.
OTHER INFORMATION
NFPA Ratings
Health: 1
Flammability: 0
Reactivity: 1
Special Notice Key: None
HMIS Ratings
Health: 1
Flammability: 0
Reactivity: 1
Protective Equipment: None
The above information is believed to be correct but does not purport to be all inclusive and shall be used only as
a guide. Analytical Technology, Inc. shall not be held liable for any damage resulting from handling or from
contact with the above products. This information is furnished without warranty, and any use of the product not in
conformance with this material safety data sheet , or in combination with any other product or process, is the
responsibility of the user.