Colpak

a Colpak
Chromatography Consumables

www.colpak.co.in

2

Colpaka sales@colpak.co.in www.colpak.co.in Tel. +91.22.6520.8849/50 Fax. +91.22.2204.5352

About Us

Established in 1964, we have been in the field of Glass Tube Engineering making glass
syringes from 1/4ml to 100ml. Over the years we have made a number of products in
glass tube engineering like Test Tubes, Heamometers, and our prestigious product
Sterile Glass Prefillable Syringes made at our plant in Alandi, Pune where we have
experience in handling a combination of products such as glass, elastomers (rubber) &
plastic.

Having this experience, we have now diversified into manufacturing of Chromatography
Consumables which use the same product knowledge at our plant on the outskirts of
Mumbai city. With experience in providing quality material since nearly over 5 decades,
we offer the laboratory market with world class products.

We look forward to working with you for your closure technique needs in the laboratory.
Kirit Shandilya
[Chairman]
Contents
Products Page
ND11 Crimp Neck Vials 3

ND9 Short Thread Vials 4

Shell Vials 5

Vials Rack 5

ND11 Snap Ring Vials 6

ND8 Screw Neck Vials 6

ND13 Screw Neck Vials 7

ND20 Headspace Vials 7

Micro Volume Inserts 8

Test Tube 16 Technical Specification 9
Crimp Neck

Glass Syringes 17 Correct Septa Selection 11

SPE Column Blanks 17 Compatibility Chart 12

Lab Refregerator 19 Cross Reference Chart 14

Pipettes 19 Product Index 15

Chromatography Division of Top Syringe Mfg. Co. Pvt. Ltd.; Mumbai, India. ISO 9001:2008 & ISO 13485 Certified

3


ND11 Crimp Neck Vials 12 x 32mm
Why Select 11mm Crimp Neck Vials?
Crimp caps provide the tightest seal, reducing the chance of sample evaporation. The 12x32mm crimp
vials and 11mm aluminium crimp caps are economical and easy to use with crimping tools.

11mm Crimp Neck Vials
Catalog No. Description Packing

TC-110 A 12 x 32mm, Clear Glass, 1st Hydrol Class, Wide Opening 100

TC-110 B 12 x 32mm, Clear Glass, 1st Hydrol Class, Wide Opening, Label + Filling Lines 100

TC-110 C 12 x 32mm, Amber Glass, Wide Opening, USP Type 1 100

TC-110 D 12 x 32mm, Amber Glass, 1st Hydrol Class, Wide Opening, Label + Filling lines, USP Type 1 100

TC-110 AER 12 x 32mm, Clear Glass, Wide Opening, USP Type 1 Expansion 33 100

TC-110 BER 12 x 32mm, Clear Glass, Wide Opening, Label + Filling lines, USP Type 1 Expansion 33 100

11mm Septas

TC-112 A Silicone White / PTFE Red, Thickness 1mm, Temperature Resistant -60°C to 200°C 100

TC-112 B PTFE Red / Silicone White / PTFE Red Septa, Thickness 1mm, Temperature Resistant -60°C to 200°C 100

TC-112 C Silicone Red / PTFE White, Thickness 1mm, Temperature Resistant -60°C to 200°C 100

TC-112 D Silicone White / PTFE Blue, Thickness 1mm, Temperature Resistant -60°C to 200°C 100

TC-112 E Pre-Slit Silicone White / PTFE Blue, Thickness 1mm, Temperature Resistant -60°C to 200°C 100

TC-112 F Pre-Slit Silicone Red / PTFE White, Thickness 1mm, Temperature Resistant -60°C to 200°C 100

TC-112 G Pre-Slit Silicone White / PTFE Red, Thickness 1mm, Temperature Resistant -60°C to 200°C 100

11mm Aluminium Septas & Caps

TC-117 Aluminium Cap 5.5mm Center Hole 100

TC-117 A Aluminium Cap Clear 5.5mm Center Hole Silicone White / PTFE Red 100

TC-117 B Aluminium Cap Clear 5.5mm Center Hole PTFE Red / Silicone White / PTFE Red 100

TC-117 C Aluminium Cap Clear 5.5mm Center Hole Silicone Red / PTFE White 100

TC-117 F Aluminium Cap Clear 5.5mm Center Hole Pre-Slit Silicone Red / PTFE White 100

TC-117 G Aluminium Cap Clear 5.5mm Center Hole Pre-Slit Silicone White /PTFE Red 100

* Blue, Red, Green & Gold Caps Available on request. #For correct vial crimping visit page no 9

TC-110 A TC-110 B TC-110 D 11mm Aluminum TC 60 A TC 60 B TC 60 C TC 60 D
Septas & Caps
Micro-Inserts for 11mm Crimp Neck Vials
TC-60 A 0.2ml Micro-Insert, 31 x 6mm, Clear Glass, 1st Hydrol Class, Flat Bottom, Fill Vol. 0.35 Packing
1000

TC-60 B 0.1ml Micro-Insert, 31 x 6mm, Clear Glass, 1st Hydrol Class, Conical, 12mm Top, Fill Vol. 0.30 (Coming Soon) 1000

TC-60 C 0.1ml Micro-Insert, 31 x 6mm, Clear Glass, 1st Hydrol Class, Conical, 15mm Top, Fill Vol. 0.25 (Coming Soon) 1000
0.1ml Micro-Insert, 29 x 5.7mm, Clear Glass, 1st Hydrol Class, Mandrel Point with assembled Plastic Spring,
TC-60 D 1000
Fill Vol. 0.20 (Coming Soon)


4


ND9 Short Screw Thread Vials 12 x 32mm
Why Select 9mm Short Screw Thread Vials?
9mm screw thread vials have a 9-425 GPI thread and the closure is dimensionally equivalent to 11mm
crimp cap vials.This means that they can be used in any autosampler that uses 11mm crimp cap vials.
9mm screw caps have an advantage over 11mm crimp caps because 9mm screw caps can easily be
applied and removed by hand and they can be reused.

9mm Short Screw Thread Vials, Wide Opening

TC-90 A 12 x 32mm, Clear Glass, 1st Hydrol Class, Wide Opening 100

TC-90 B 12 x 32mm, Clear Glass, 1st Hydrol Class, Wide Opening, Label + Filling Lines 100

TC-90 C 12 x 32mm, Amber Glass, 1st Hydrol Class, Wide Opening 100

TC-90 D 12 x 32mm, Amber Glass, 1st Hydrol Class, Wide Opening , Label + Filling Lines USP Type 1 100

TC-90 AER 12 x 32mm, Clear Glass, Wide Opening,l, USP Type 1 Expansion 33 100

TC-90 BER 12 x 32mm, Clear Glass, Wide Opening ,Label + Filling lines, USP Type 1 Expansion 33 100

TC-91 ERB 12 x 32mm, PP 9mm Micro-Vial, Transparent 100

9mm Short Screw Thread Septas & Caps

TC-92 A Silicone White / PTFE Red, Thickness 1mm, Temperature Resistant -60°C to 200°C 100

TC-92 B PTFE Red / Silicone White / PTFE red, Thickness 1mm, Temperature Resistant -60°C to 200°C 100

TC-92 C Silicone Red / PTFE White, Thickness 1mm, Temperature Resistant -60°C to 200°C 100

TC-92 D Silicone White / PTFE Blue, Thickness 1mm, Temperature Resistant -60°C to 200°C 100

TC-92 E Pre-Slit Silicon White / PTFE Blue, Thickness 1mm, Temperature Resistant -60°C to 200°C 100

TC-92 F Pre-Slit Silicone Red / PTFE White, Thickness 1mm, Temperature Resistant -60°C to 200°C 100

TC-92 G Pre-Slit Silicone White / PTFE Red, Thickness 1mm, Temperature Resistant -60°C to 200°C 100

TC-94 B PP Blue Knurled Short Screw Thread Cap, 6mm Center Hole 100

TC-94 BA PP Blue Knurled Short Screw Thread Cap, 6mm Center Hole Silicone White / PTFE Red 100

TC-94 BB PP Blue Knurled Short Screw Thread Cap, 6mm Center Hole PTFE Red / Silicone White / PTFE Red 100

TC-94 BC PP Blue Knurled Short Screw Thread Cap, 6mm Center Hole Silicone Red / PTFE White 100

TC-94 BD PP Blue Knurled Short Screw Thread Cap, 6mm Center Hole Silicone White / PTFE Blue 100

TC-94 BE PP Blue Knurled Short Screw Thread Cap, 6mm Center Hole Silicone White / PTFE Blue with Pre-Slit 100

TC-94 BF PP Blue Knurled Short Screw Thread Cap, 6mm Center Hole Silicone Red / PTFE White with Pre-Slit 100

TC-94 BG PP Blue Knurled Short Screw Thread Cap, 6mm Center Hole Silicone White /PTFE Red with Pre-Slit 100

* Transparent, Red, Green, Black & Yellow Caps Available on request. #For correct vial sealing screw cap visit page no 9

TC-90 A TC-90 B TC-90 D 9mm Short Screw TC-91 ERB
Threads Septas & Caps

5


9mm Short Screw Thread Septas & Caps

TC-95 B PP Blue Short Screw Thread Cap, 6mm Closed Top 100

TC-95 BA PP Blue Short Screw Thread Cap, 6mm Closed Top, Silicone White / PTFE Red 100

TC-96 B PP Blue Short Screw Thread Cap, 6mm Center Hole 100

TC-96 BA PP Blue Short Screw Thread Cap, 6mm Center Hole Silicone White / PTFE Red 100

TC-96 BB PP Blue Short Screw Thread Cap, 6mm Center Hole PTFE Red / Silicone White / PTFE Red 100

TC-96 BC PP Blue Short Screw Thread Cap, 6mm Center Hole Silicone Red / PTFE White 100

TC-96 BD PP Blue Short Screw Thread Cap, 6mm Center Hole Silicone White / PTFE Blue 100

TC-96 BE PP Blue Short Screw Thread Cap, 6mm Center Hole Silicone White / PTFE Blue with Pre-Slit 100

TC-96 BF PP Blue Short Screw Thread Cap, 6mm Center Hole Silicone Red / PTFE White with Pre-Slit 100

TC-96 BG PP Blue Short Screw Thread Cap, 6mm Center Hole Silicone White / PTFE Red with Pre-Slit 100

* Transparent, Red, Green, Black & Yellow Caps Available on request. #For correct vial sealing screw cap visit page no 9

Micro-Inserts for 9mm Short Screw Thread Vials
TC-60 A 0.2ml Micro-Insert, 31 x 6mm, Clear Glass, 1st Hydrolic Glass, Flat Bottom, Fill Vol. 0.35 Packing
1000

TC-60 B 0.1ml Micro-Insert, 31 x 6mm, Clear Glass, 1st Hydrolic Glass, Conical, 12mm Top, Fill Vol. 0.30(Coming Soon) 1000

TC-60 C 0.1ml Micro-Insert, 31 x 6mm, Clear Glass, 1st Hydrolic Glass, Conical, 15mm Top, Fill Vol. 0.25(Coming Soon) 1000
0.1ml Micro-Insert, 29 x 5.7mm, Clear Glass, 1st Hydrolic Glass, Mandrel Point with assembled Plastic Spring,
TC-60 D 1000
Fill Vol. 0.20(Coming Soon)

TC 60 A TC 60 B TC 60 C TC 60 D 9mm Short Screw
Threads Septas & Caps
Shell Vials
Why Select Shell Vials?
Shell vials feature thicker walls for safer sample handling. They are compatible with Waters WISP™ 48
and 96 style autosamplers. All shell vials are supplied with polyethylene plug closures – their tear-away
design ensures excellent penetration and ventilation during sampling.

1ml Shell Vials Micro-Inserts
40mm x 8.2mm, 1ml Shell Vials, Clear Glass, 1st Hydrol Class, Packing
TC-712 8mm PE-Plug, Soft without insertion barrier for Micro-Insert 1000

TC-712 A 40mm x 8.2mm, 1ml Shell Vial, Clear Glass, 1st Hydrol Class 1000

TC-712 B 8mm PE-Plug, Transparent (Without Insertion Barrier) 1000

Vials Rack

TC-70 PP Vial Rack 182 x 92 x 16mm, 50 cavities with 12mm diameter 1 TC-712 TC 70


6


ND11 Snap Ring Vials 12 x 32mm
Why Select 11mm Snap Ring Vials?
11mm snap caps provide a secure seal that minimises evaporation, even with volatile samples. Snap caps
are often more convenient than crimp caps as they can easily be applied and removed by hand. An audible
click ensures a secure seal has been formed and that the cap is correctly aligned. Snap/crimp vials can be
closed with either snap caps or crimp caps.

11mm Snap Ring Vials

TC-110 SA 12 x 32mm, Clear Glass, 1st Hydrol Class, Wide Opening 100

TC-110 SB 12 x 32mm, Clear Glass, 1st Hydrol Class, Wide Opening, Label + Filling Lines 100

TC-110 SC 12 x 32mm, Amber Glass, Wide Opening, USP Type 1 100

TC-110 SD 12 x 32mm, Amber Glass, 1st Hydrol Class, Wide Opening, Label + Filling Lines 100

11mm Snap Ring Seals

TC-110 SG PP Clear 6mm Snap Ring Cap, Silicone White / PTFE Red 100

TC-110 SH PP Clear 6mm Snap Ring Cap, Pre-Slit Silicone White / PTFE Red 100

TC-110 SI PP Clear 6mm Snap Ring Closed Cap with Star Membrane 100

TC-110 SA TC-110 SB TC-110 SD 11mm Snap TC-80 A TC-80 B 8mm Screw
Ring Septas & Caps Septas & Caps

ND8 Screw Neck Vials 12 x 32mm
Why Select 8mm Screw Neck Vials?
8mm (8-425) screw neck vials are the original smaller opening autosampler vials. They are designed to
work in a variety of autosamplers requiring narrow neck vials.

8mm Screw Neck Vials

TC-80 A 12 x 32mm, 1st Hydrol Class Clear Glass, Small Opening 100

TC-80 B 12 x 32mm,1st Hydrol Class Clear Glass, Small Opening ,Label + Filling Lines 100

TC-80 C 12 x 32mm, Amber Glass, Small Opening , USP Type 1 100

TC-80 D 12 x 32mm, Amber Glass, Small Opening, Label + Filling Lines, USP Type 1 100

PP 8mm Screw Seals

TC-84 K PP 8mm Black Knurled Screw Cap, 5.5mm Center Hole Cap 100

PP 8mm Black Knurled Screw Cap, 5.5mm Center Hole Silicone White / PTFE Red, Thickness 1.5mm,
TC-84 KA 100
Temperature Resistant -60°C to 200°C
* Transparent, Red, Green & Yellow Caps Available on request. #For correct vial sealing screw cap visit page no 12


7


ND13 Screw Neck Vials 15 x 45mm
Why Select 13mm Screw Neck Vials?
13mm vials have a 13-425 GPI thread and can hold up to 4ml of sample. They are used by the Waters
48-position autosampler and many others.

13mm Screw Neck Vials, Wide Opening

TC-130 A 4ml Clear Glass, 15 x 45mm, 1st Hydrol Class 100

TC-130 B 4ml Clear Glass, 15 x 45mm, 1st Hydrol Class, Label + Filling Lines 100

TC-130 C 4ml Amber Glass 15 x 45mm, 1st Hydrol Class 100

TC-130 D 4ml Amber Glass 15 x 45mm, 1st Hydrol Class, Label + Filling lines 100

13mm Screw Seals
PP Black Screw Cap 8.5mm Center Hole, Silicone White / PTFE Red, 1.5mm Thickness, Temperature
TC-136 KA 100
Resistant -60°C to 200°C

20mm Aluminum
Septas & Caps

13mm Screw
Septas & Caps

TC-130 A TC-130 B TC-130 D 20mm Magnetic
Aluminum Septas & Cap TC- 200
ND20 Headspace Vials TC- 200 A

Why Select Headspace Vials?
Colpak high quality headspace vials have a bevelled neck for a secure seal, uniform glass thickness for even
heat distribution and a stable, strong design for ease of use. They are available with rounded or flat bottom
profiles for accurate instrument compatibility. Use with the 20mm headspace caps, septas and seals.

20mm Headspace Vials

TC-200 22.5 x 46mm, 10ml Crimp Headspace Clear Vial, Flat Bottom 100

TC-200 A 22.5 x 75.5mm 20ml Crimp Headspace Clear Vial, Flat Bottom 100

20mm Septas & Caps

TC-202 H Silicone White / PTFE Beige, Thickness 3mm, Temperature Resistant -60°C to 200°C 100

TC-202 J Silicone White / PTFE White, Thickness 3mm, Temperature Resistant -60°C to 200°C 100

TC-204 10mm Center Hole, Blue Crimp Top, Magnetic Aluminum Cap 100

TC-206 10mm Center Hole, Crimp Top, Aluminum Cap 100

TC-206 H 10mm Center Hole, Crimp Top, Aluminium Cap with Silicone White / PTFE Beige 100

TC-206 J 10mm Center Hole, Crimp Top, Aluminum Cap with Silicone White / PTFE White 100


8


Limited Volume Inserts
Why Select Limited volume Inserts?
Limited volume inserts are an economical solution in sample analysis to reduce the use and waste of
solvents and small samples. For optimum instrument performance and accurate test results, use the
guides below to ensure that the correct insert is used with the appropriate autosampler vial. The Insert is
neckless and always has to be used within a vial. The diameter of the Insert depends on the size of the vial
opening. Inserts reduces the volume, so that the needle is capable of picking up even smallest sample
quantities. The larger the top of an insert, the more the volume can be reduce.

Bottom Type Insert Selection Guide

Glass is most commonly used for vial inserts.
Solvent
Polypropylene may be necessary when using pH
Compatibility
sensitive samples.

Mandrel point inserts provide the smallest dead
volume so are suitable when minimising sample loss
Targeted Dead
is important. Conical bottom inserts provide suffi cient
Volume
sample extraction for Most applications.

Flat bottom inserts are the cheapest and may be a
viable option for limited sampling. Mandrel point vial
Price
inserts are the most expensive but they minimise
sample loss and provide excellent Injection accuracy.
Flat Conical Mandrel

8mm 9mm 11mm 11mm
Screw Screw Crimp Snap
0.2ml Micro-Insert, 31 x 5mm, Clear Glass, 1st Hydrol Class,
TC-50 A
Flat Bottom, Fill Vol. 0.30
1000 ü
0.1ml Micro-Insert, 31 x 5mm, Clear Glass,1st Hydrol Class,
TC-50 B
Conical, 9mm Top, Fill Vol. 0.20 (Coming Soon)
1000 ü
TC-50 C
Conical, 15mm Top, Fill Vol. 0.15 (Coming Soon)
1000 ü
TC-50 D Mandrel Point with assembled Plastic Spring,Fill Vol. 0.15
(Coming Soon)
1000 ü
TC-60 A Flat Bottom, Fill Vol. 0.35 1000 ü ü ü
TC-60 B Conical, 12mm Top, Fill Vol. 0.30 (Coming Soon) 1000 ü ü ü
TC-60 C Conical, 15mm Top, Fill Vol. 0.25 (Coming Soon) 1000 ü ü ü
0.1ml Micro-Insert, 29 x 5.7mm, Clear Glass,1st Hydrol Class,
TC-60 D Mandrel Point with assembled Plastic Spring, Fill Vol. 0.20
(Coming Soon)
1000 ü ü ü

TC 50 A TC 50 B TC 50 C TC 50 D TC 60 A TC 60 B TC 60 C TC 60 D


9


Technical Specifications
Screw Thread Finish
GPI refers to the "Glass Packaging Institute"
The GPI is responsible for establishing and issuing standards for the types and finishes produced by American glass manufacturers.

For example, and 8-425 neck finish is approximately 8 mm in diameter across the outside of the threads. The 425 represents the
finish (style of thread).
Typical GPI finishes found in the chromatography field are as follows:
8-425 Closure - Varian, Shimadzu 10-425 Closure - Waters Alliance 2690 13-425 Closure - Waters 48 position WISP™, Shimadzu.

Note: The 9 mm thread finish does not appear in the GPI finishes. It is not a standard finish. The 9 mm closure and vial are used
with Hewlett-Packard equipment.

A
B
Standard Screw Thread Finish ID C
"A" = Outer diameter of seal

"B" =Inside diameter of the thread
D
"ID" = Inside diameter

"C" =Start of thread

"D" =Distance from top of finish to shoulder for closure clearance

Screw Neck

Septum Distortion Sealing Screw Cap

It is important not to over-tighten screw caps

When using any type of screw cap vial, care should be taken to ensure
the cap is screwed on securely without being Unnecessarily over-
tightened.

Over-tightening can cause various problems:
ŸThe septum may distort as it is placed under pressure and twisted
(see diagram)
ŸSeptum resealing can be adversely affected
ŸCoring may occur upon injection
ŸThe cap may unscrew itself – this can result in sample evaporation
Over-Tightened Screw Cap

A
B
Standard Crimp Seal Finish
ID
"A" = Outer diameter of seal
C
"B" = Crimp tool and robotic arm clearance
D
"ID" = Inside diameter

"C" = Crimp seal thickness

"D" = Distance from top to shoulder for crimp & robotic arm clearance

Crimp Neck

Target Hole Correct Vial Crimping
Cap
Seal
Achieve accurate results with correctly
Crimped vials
Collar/Head Skirt
A correctly crimped vial is neither over-crimped
nor under-crimped. Over-crimping may cause Over-Crimped
Tuck-Under
coring or poor septum resealing, while under-
Neck crimping can cause evaporation problems.
Shoulder
With proper adjustment of the vial crimpers,
Wall Perfect crimping can be achieved every time.
When the vial is crimped perfectly, the cap
should not be able to rotate and the septum
Correctly Crimped Vial should appear smooth and level. Under-Crimped


10


Technical Specifications

Glass Technical Information
Terminology:

Borosilicate :A glass that is high in silicate and having at least 5% boron oxide.

Linear Coefficient of Expansion: Fractional change in length of glass per degree change in temperature. Strain Point -
Maximum temperature to which glass should be heated during use.

Types of Glass:
USP Type - Pharmaceutical glass containers can be classified as USP Type I, II, III or NP.

Type I: Borosilicate glass represents the least reactive glass. Type I glass has the least pH shift. (Lowest leaching
characteristics), Coefficient of Expansion = 33 or 51 for Clear and 51 for Amber.

Type II: De-alkalized soda lime glass with higher levels of sodium hydroxide and calcium oxide.

Type III: Soda lime glass - cannot be autoclaved.

Type NP: General purpose soda-lime glass used where chemical durability and heat shock are not factors. Coefficient of
Expansion=92

Glossary
1 PP : Polypropylene 5 GC : Gas Chromatography

2 PE : Polyethylene 6 HPLC : High Pressure Liquid Chromatography

3 PTFE : Poly Tetra Flouro Ethylene 7 1st Hydrol Class : Type 1 glass

4 ND : Nominal Diameter

Glass Properties
Colour Clear Clear Amber

Linear Coefficient of Expansion 33 51 51

Strain Point (Degrees Celsius) 515 535 535

USP Class Type Type 1 Type 1 Type 1

Light Protection No No Yes

Type 33 is clear borosilicate glass referred to as Type 1, Class Type 51 is clear or amber borosilicate glass referred
A-33 Expansion to as Type 1, Class B-51 Expansion

This is the lowest coefficient of expansion Comparatively low coefficient of expansion

Highly resistant to chemical attack All round good chemicalcompatibility

Total arsenic and antimony oxides are less than 0.05% Good resistance to heat shock

Free of the elements of the calcium, magnesium and zinc group of heavy metals Higher metal content

Not available as amber glass All amber vials are made from Type 1, Class B-51 expansion glass

Amber glass is to be used for a light sensitive samples; however, if
left out in daylight for extended periods of time the amber coloring
Plastic Properties will fade and become less efficient

Type of Plastic LDPE HDPE PP PMP PS

Maximum. use 80°C / 120°C / 135°C / 175°C / 90°C /
176°F 248°F 275°F 347°F 194°F
Temperature C/F
Transparency Translucent Translucent Translucent Clear Clear

Sterilization Autoclaving No No Yes Yes No
Disinfectants Yes Yes Yes Yes No

Dry Heat No No No Yes No
Radiatioin Yes Yes No No Yes

Specification Gravity 0.92 0.95 0.90 0.83 1.05

Flexibility Good Rigid Rigid Rigid Rigid


11


Selecting the correct SEPTA
The selection of correct septa depends on the application. Almost all septa are laminated on one side with PTFE, which
has a high chemical resistance and forms an inert barrier between samples and carrier material of the septa. The
carrier materials have different physical and chemical properties, such as temperature resistance, reseal-ability
properties, cleanliness, hardness, thickness, etc.

The individual conditions of the user’s application aim at the specific characteristics of the
carrier material, e.g.:
Septa Compatibility Post Injection
Poor :Post injection this septa will exhibit sample loss and deterioration

Fair :Post injection this septa will maintain integrity for a limited period of time with some deterioration

Good :Post injection this septa will maintain integrity for an extended period of time minor deterioration

Excellent :Post injection this septa will maintain integrity for high percentage of analytical sample analysis with absolute
minimal deterioration

PTFE
Exceptional solvent resistance with superior chemical inertness
Only suitable for single injection use – not recommended for sample storage before or after injection
Not resealable
The most economical septa
Maximum service temperature 260°C

PTFE / Silicone
Excellent resealing capabilities – highly recommended for multiple injections and sample storage
Autoclavable and excellent resistance to coring
PTFE chemical resistance until pierced then the septa will have the compatibility of silicone
Temperature range -40°C to 200°C, For thin Fragile needle

Pre-Slit PTFE / Silicone
Reduces the possibility of coring with blunt tipped needles or for applications using a thin gauge needle
Used to prevent vacuum from forming inside the vial
Temperature range -40°C to 200°C, For Blunt, thick needle

PTFE / Silicone / PTFE
Recommended for multiple injections due to above average resealing capabilities
Autoclavable and excellent resistance to coring
Recommended for demanding applications such as internal standards, trace analysis or applications where there will be a long time
between injections
Temperature range -40°C to 200°C

PTFE / Red Rubber
The most economical septa used in routine analysis
Easy to pierce with moderate resealability
PTFE chemical resistance until pierced then the septa will have the compatibility of rubber
Not recommended when retaining samples for further analysis or for multiple injections
Temperature range -40°C to 110°C

Chemical Rubber Silicone Butyl Rubber Viton
Acids Good Excellent Fair Poor
Acids, diluted Good Good Fair Poor
Acetone Good Poor Good Poor
Alcohols Fair Good Good -
Benzene Poor Fair Poor Good
Chloroform Poor Good Fair Good
Dioxane Fair Good Poor Poor
Ethyl Acetate Good Excellent Fair Poor
Ethyl Alcohol Excellent Good Fair -
Halogenated Hydrocarbons Poor Excellent Poor -
Hexane Poor Good Poor -
Ketones Excellent Fair Good -
Methanol Good Excellent Good Poor
Pentane Poor Good Poor -
Sulphuric Acid Fair Good Poor Good
Sufactants Excellent Excellent Fair -
Toluene Fair Good Poor Excellent
Water Excellent Excellent Good Good


12


3
9

1
ND

ND
ad

ad
11
hre

hre

0
8

1

D2
ND

ND

D1
wT

wT

eN
Colpak

gN
e ck

e ck
cre

cre

als
pac
Ri n
wN

pN

l Vi
rt S

rt S

a ds
p
Autosampler

Crim
e

l
Sho

Sho
Sna

She
Scr

He
Compatibility TC-80 A
TC-80 B
TC-90 A TC-90 B
TC-90 C TC-90 D
TC-110 A
TC-110 B
TC-110 SA
TC-110 SB
TC-130 A
TC-130 B
TC-200
TC-200 A
TC-712
TC-712 A
TC-80 C TC-90 AER TC-110 C TC-110 SC TC-130 C TC-712 B
Chart TC-80 D TC-90 BER TC-110 D TC-110 SD TC-130 D
TC-91 ERB TC-110 AER
TC-110 BER
Agilent / HP 1050 ¤ ¤ ¤ ¤
Agilent / HP 1090 ¤ ¤ ¤ ¤
Agilent / HP 1100 ¤ ¤ ¤ ¤
Agilent / HP 6850 ¤ ¤ ¤
Agilent / HP 7670 A ¤ ¤ ¤
Agilent / HP 7671 A ¤ ¤ ¤
Agilent / HP 7673 Series ¤ ¤ ¤
Agilent / HP 7683 ¤ ¤ ¤
Agilent / HP 7694 Headspace ¤
Agilent / HP All Other Model ¤ ¤ ¤
Alcott 718 AL ¤ ¤ ¤ ¤
Alcott 719 D ¤ ¤ ¤ ¤
Alcott 738 ¤ ¤ ¤ ¤
Alltech 570 ¤ ¤ ¤ ¤ ¤
Alltech 580 ¤ ¤ ¤ ¤
Beckman 501 ¤ ¤ ¤ ¤
Beckman 502 ¤ ¤ ¤ ¤
Beckman 507 ¤ ¤ ¤ ¤
Beckman Marthon ¤ ¤ ¤ ¤
Beckman Promis ¤ ¤ ¤ ¤
Beckman Triathlon ¤ ¤ ¤ ¤
Bruke LC 51 ¤
Carlo Erba/Fison 42 Vial Tray ¤ ¤ ¤ ¤
Carlo Erba/Fison AS 105 ¤ ¤ ¤
Carlo Erba/Fison AS 800 / 8000 ¤ ¤ ¤ ¤
Carlo Erba/Fison HS 850 ¤
Dan ALS 39.80 ¤ ¤ ¤ ¤
Dan ALS 86.80 ¤ ¤ ¤ ¤
Dan HS 39.50 ¤
Dan HS 86.50 ¤
Dionex/Gynkote Gina ¤ ¤ ¤ ¤
Dionex/Gynkote ASI 100(2ml Tray) ¤ ¤ ¤ ¤
Dionex/Gynkote AS 509(2ml Tray) ¤ ¤ ¤ ¤
Dynatech/Precisio 42 Vail Tray ¤ ¤ ¤ ¤
Dynatech/Precisio LC 2000 ¤
Gerstel MS 2 ¤ ¤ ¤ ¤
Gilson 201 ¤
Gilson 202 ¤
Gilson 221 ¤
Gilson 222 ¤
Gilson 231/231XL ¤ ¤ ¤ ¤
Gilson 232/232XL ¤ ¤ ¤ ¤
Gilson 233XL ¤ ¤ ¤ ¤
Gilson 234 ¤ ¤ ¤ ¤
Gilson 235 ¤ ¤ ¤ ¤
Gilson 401 ¤ ¤ ¤ ¤
Gilson 402 ¤ ¤ ¤ ¤
Gilson ASPEC ¤ ¤ ¤ ¤ ¤
Gilson All Other Model ¤ ¤ ¤
HTA HT250D/HT280T ¤ ¤ ¤ ¤
HTA HT300A/HT310A ¤ ¤ ¤ ¤
HTA HT300L ¤ ¤ ¤ ¤
Jasc All Models ¤ ¤ ¤ ¤
Kontro MSI 660 ¤
Kontro All Other Model ¤ ¤ ¤
LDC Marathon ¤ ¤ ¤ ¤
Leap Technologie A200LC ¤ ¤ ¤ ¤
Leap Technologie CTC DI PAL ¤ ¤ ¤ ¤
Leap Technologie CTC Combi PAL ¤ ¤ ¤ ¤
Leap Technologie CTC A200E PAL ¤ ¤ ¤ ¤
Leap Technologie CTC HTS PAL ¤ ¤ ¤ ¤ ¤
Leap Technologie CTC LC Mini PAL ¤ ¤ ¤ ¤
Leap Technologie CTC A200S PAL ¤ ¤ ¤ ¤
Merck/Hitach AS-2000 ¤ ¤ ¤ ¤
Merck/Hitach AS-4000 ¤ ¤ ¤ ¤
Merck/Hitach L7200 ¤ ¤ ¤
Merck/Hitach L725 ¤ ¤ ¤ ¤
Merck/Hitach L8800 ¤ ¤ ¤
Merck/Hitach LaChrom ¤


13


3
9

1
ND

ND
ad

ad
11
hre

hre

0
8

1

D2
ND

ND

D1
wT

wT

eN
Colpak

gN
e ck

e ck
cre

cre

als
pac
Ri n
wN

pN

l Vi
rt S

rt S

a ds
p
Autosampler

Crim
e

l
Sho

Sho
Sna

She
Scr

He
Compatibility TC-80 A
TC-80 B
TC-90 A TC-90 B
TC-90 C TC-90 D
TC-110 A
TC-110 B
TC-110 SA
TC-110 SB
TC-130 A
TC-130 B
TC-200
TC-200 A
TC-712
TC-712 A
TC-80 C TC-90 AER TC-110 C TC-110 SC TC-130 C TC-712 B
Chart TC-80 D TC-90 BER TC-110 D TC-110 SD TC-130 D
TC-91 ERB TC-110 AER
TC-110 BER
Perkin Elmer Al-1 ¤ ¤ ¤
Perkin Elmer Auto System ¤ ¤ ¤ ¤
Perkin Elmer Integral 4000 ¤ ¤ ¤
Perkin Elmer ISS 100 ¤ ¤ ¤
Perkin Elmer ISS 200 ¤ ¤ ¤
Perkin Elmer LC600 42 Vial Tray ¤ ¤ ¤
Perkin Elmer Series 200 ¤ ¤ ¤ ¤
Pharmacia LKB 2157-010 ¤ ¤ ¤ ¤
Shimadzu AOC-14 ¤ ¤ ¤ ¤ ¤
Shimadzu AOC-1400 ¤ ¤ ¤ ¤ ¤
Shimadzu AOC-17 ¤ ¤
Shimadzu AOC-20i ¤ ¤
Shimadzu AOC-20s ¤ ¤
Shimadzu AOC-8B ¤
Shimadzu LC-10A ¤
Shimadzu SIL-2AS ¤
Shimadzu SIL-6B ¤ ¤ ¤ ¤
Shimadzu SIL-9A ¤ ¤ ¤ ¤
Shimadzu SIL-10A ¤
Shimadzu SIL-HTa ¤ ¤ ¤ ¤
Shimadzu SIL-HTc ¤ ¤ ¤ ¤
Spark Holland Marathon ¤ ¤ ¤ ¤
Spark Holland Midas ¤ ¤ ¤
Spark Holland Promis ¤ ¤ ¤ ¤
Spark Holland SPH 125 ¤ ¤ ¤
Spark Holland Triathlon ¤ ¤ ¤
Spectra-Physics/TS 8875 ¤ ¤ ¤
Spectra-Physics/TS 8880 ¤ ¤ ¤
Spectra-Physics/TS AS100/ 1000 ¤ ¤ ¤
Spectra-Physics/TS AS300/ 3000 ¤ ¤ ¤
Spectra-Physics/TS Spectra-System ¤ ¤ ¤
Thermo Ques AS800 ¤
Thermo Ques Midas ¤ ¤ ¤
Thermo Ques HS850 ¤
Thermo Ques Trace GC2000+AS2000 ¤ ¤ ¤ ¤
Thermo Ques Trace GC2000+HS2000 ¤
Tosoh AS-8010 ¤ ¤ ¤
Tosoh TSK-6080 ¤ ¤ ¤ ¤
Unicam 4247 ¤ ¤ ¤
Unicam 4710 ¤ ¤ ¤
Unicam LC-XP ¤ ¤ ¤ ¤ ¤
Varian 8035 ¤ ¤
Varian 8100 ¤ ¤ ¤ ¤ ¤
Varian 8200 ¤ ¤ ¤ ¤ ¤
Varian 8200 CX ¤ ¤
Varian 9090 ¤ ¤ ¤ ¤
Varian 9095 ¤ ¤ ¤ ¤
Varian 9100 ¤ ¤ ¤ ¤
Varian CombiPAL ¤ ¤ ¤ ¤
Varian CP-8400 ¤ ¤
Varian CP-8410 ¤ ¤
Varian Genesis ¤
Varian Maratho ¤ ¤ ¤ ¤
Varian ProStar 400 ¤ ¤ ¤
Varian Ultra GC/M ¤ ¤
Varian Vista ¤ ¤
Water 2690 ¤ ¤ ¤
Water 2710 Sample Manager ¤ ¤ ¤
Water 48 Position ¤ ¤
Water 96 Position ¤
Water Alliance ¤ ¤ ¤ ¤ ¤
Water Breeze ¤ ¤ ¤ ¤ ¤
Water 710 ¤ ¤
Water 712 ¤ ¤
Water 715 ¤ ¤
Water 717 ¤ ¤


14


Vial Cross Reference Chart

Agilent Varian Water Chromacol Finneran National Cronus La-Pha Colpak

Crimp Neck Vials 12 x 32mm

5181-3375 392611634 WAT094222 32011-1232 C4011-1 VZS-02CC-100 11 09 0356 TC-110 A

5182-0543 2-CV 32011M-1232 C4011-1W VZS-02CC-100 11 09 0476 TC-110 B

5181-3376 392611635 WAT094223 2-CV(A) 3211M-1232A C4011-2W VZS-02CA-100 11 09 0477 TC-110 D

Snap/Crimp Cap Vials 12 x 32mm

5182-0544 32011S-1232 C4011-5 VZS-02SC-100 11 09 0627 TC-110 SA

5182-0546 WAT094219 2-RV 32011SM-1232 C4011-5W VZS-02SC-100 11 09 0644 TC-110 SB

5181-0545 WAT094220 2-RV(A) 3211SM-1232A C4011-6W VZS-02SA-100 11 09 0645 TC-110 SD

8mm Screw Cap Vials 12 x 32mm

5183-4428 392611639 32008-1232 C4013-1 VZS-0208C-100 11 09 0210 TC-80 A

2-SV 32008M-1232 C4013-1W VZS-0208C-100 11 09 0419 TC-80 B

5183-4429 392611640 32008-1232A C4013-2 VZS-0208A-100 11 09 0259 TC-80 C

2-SV(A) 32008M-1232A C4013-2W VZS-0208A-100 11 09 0382 TC-80 D


5182-0714 39261165 32009-1232 C4000-1 VZS-0209C-100 11 09 0500 TC-90 A

5182-0715 186000273 2-SVW 32009M-1232 C4000-1W VZS-0209C-100 11 09 0519 TC-90 B

392611654 32008-1232A C4000-2 VZS-0209A-100 TC-90 C

5182-0716 186000848 2-SVW(A) 32009M-1232A C4000-2W VZS-0209A-100 11 09 0520 TC-90 D


5183-4448 186000840 4-SV C4015-1 VZS-0415C-100 13 09 0222 TC-130 A

34013-1545 C4015-11W VZS-0415C-100 13 09 1335 TC-130 B

5182-4450 186001135 4-SV(A) C4015-2 VZS-0415A-100 13 09 0280 TC-130 C

34013-1545A C4015-2W VZS-0415A-100 11 09 1136 TC-130 D

20mm Headspace Vials

5182-0838 392611677 310020-2346 C4020-10 VZH-10CF-100 20 09 0795 TC-200

5182-0837 392611675 20-CV 320020-2375 C4020-20 VZH-20CF-100 20 09 0796 TC-200 A

1ml Shell Vials Micro-Inserts
C4015-96 VKL-0103-GCC-
WAT022479 1-NWV-C/200 9800-840(alt.) /200(Alt.) 08 14 1168 TC-712
250
TC-712 A

TC-712 B


15


Product Index

Catalog Page Catalog Page Catalog Page Catalog Page
No. No. No. No. No. No. No. No.
TC-50 A 8 TC-92 A 4 TC-96 BE 5 TC-117 A 3

TC-50 B 8 TC-92 B 4 TC-96 BF 5 TC-117 B 3

TC-50 C 8 TC-92 C 4 TC-96 BG 5 TC-117 C 3

TC-50 D 8 TC-92 D 4 TC-117 F 3
TC-110 A 3

TC-60 A 3,5,8 TC-92 E 4
TC-110 B 3 TC-117 G 3

TC-60 B 3,5,8 TC-92 F 4
TC-110 C 3 TC-130 A 7

3,5,8 TC-92 G 4
TC-60 C TC-110 D 3 TC-130 B 7

TC-94 B 4
TC-60 D 3,5,8 TC-110 AER 3 TC-130 C 7

TC-94 BA 4
TC-70 5 TC-110 BER 3 TC-130 D 7

TC-94 BB 4
TC-80 A 6 TC-110 SA 6 TC-136 KA 7

TC-94 BC 4
TC-80 B 6 TC-110 SB 6 TC-200 7

TC-94 BD 4
TC-80 C 6 TC-110 SC 6 TC-200 A 7

TC-94 BE 4
TC-80 D 6 TC-110 SD 6 TC-202 H 7

TC-94 BF 4
TC-84 K 6 TC-110 SG 6 TC-202 J 7

TC-94 BG 4
TC-84 KA 6 TC-110 SH 6 TC-204 7

TC-90 A TC-95 B 5 TC-110 SI 6 7
4 TC-206

TC-90 B 4 TC-95 BA 5 TC-112 A 3 TC-206 H 7

TC-90 C 4 TC-96 B 5 TC-112 B 3 TC-206 J 7

TC-90 D 4 TC-96 BA 5 TC-112 C 3 TC-712 5

TC-90 AER 4 TC-96 BB 5 TC-112 F 3 TC-712 A 5

TC-90 BER 4 TC-96 BC 5 TC-112 G 3 TC-712 B 5

TC-91 ERB 4 TC-96 BD 5 TC-117 3


16


"TEST-IT" Brand Test Tube

Made from 33 expansion Tubing of uniform thickness for better heat transfer & chemical resistance.
Borosilicate hard glass grade I meets ASTM standards.
Permanent white marking on test tube with Lot. No.
Packed as per International standards of 72 pcs /box.

Features

Grade I
Borosilicate Glass
33 Expansion
With Rim & Without Rim
Non-Sterile
Complies with IS 2618:2006
Typical Packing of
As per ASTM (Europeon)Standard Test Tubes
72 pcs

Available Sizes (With Rim/Without Rim)

Catalog No. Catalog No. Over Flow
Size Packing
With Rim Without Rim Capacity

6110075 6210075 4ml 10 x 75 72/100

6112075 6212075 6ml 12 x 75 72/100

6112100 6212100 10ml 12 x 100 72/100

6115125 6215125 16ml 15 x 125 72/100

6115150 6215150 24ml 15 x 150 72/100

6118150 6218150 28ml 18 x 150 72/100

6125100 6225100 36ml 25 x 100 72/100

6125150 6225150 55ml 25 x 150 72/100


17


Glass Syringes
Features
Syringes metal luer lock tip meets the specification of the American National Standards for Medical Materials luer taper fitting
performances ISO 594 (Earlier HIMA MD 70.1-1983)

Syringe cylinder plunger fit is leak proof and meets the requirements of Federal Specification GG-S-92 lb / A-A-54840 / ISO
7886

The printing of graduation & Logos on the syringe is done by an in house developed ink which is permanently fused in to the
glass. This accounts for a life time accuracy and legibility.

Syringes offer clarity, physical strength, chemical inertness and safety that are assured with glass
1 ml
Syringe reinforced Flanges which is flat on two sides prevent the syringe from rolling

Syringes are made by an ISO 9001 & ISO 13485 certified company 2 ml

Syringes Cylinder made of 1st Hydrol Class

Syringes confirm to ISO 594/1; 595/2 5 ml

10 ml
Capacity Catalog No. Graduation Packing
1ml 04-04-02-01 0.01ml 10 20 ml
2ml 01-05-02-05 0.2ml 10

5ml 01-08-02-06 0.5ml 10

10ml 01-09-02-07 1ml 10

20ml 01-10-02-08 2ml 10 30 ml
30ml 01-11-02-08 2ml 10

50ml 01-13-02-10 5ml 10

100ml 01-15-02-10 5ml 10

50 ml

100 ml
GlasSPE Brand SPE Column Blanks
Solid Phase Extraction (SPE) Empty Column Blanks, Cartridges, Cylinders Made of Borosilicate Glass
USP Type 1

Capacity Packing

0.5ml 10

1ml 10

3ml 10

6ml 10

12ml 10

20ml 10

35ml 10

60ml 10

100ml 10


18


Brand Products

-20° C / -40° C Lab Refrigerator Stability / BOD Incubator Walk in
Deep Freezer with PLC Photo Stability with PLC Stability Chamber
with PLC with PLC

Orbital Shaker Lab Precision Oven Bacteriological Vertical Lab Autoclave Vaccum Oven
Incubator Incubator (G M P Model) Circular

Vacuum Oven Muffle Furnance Constant Temperature Bath Cryo Bath
Rectangular

E-mail: tempo@vsnl.com Also visit www.tempoinstruments.com

Seed Germinator Water Still Hot Plate Melting Point Apparatus
Cooling Chamber All Glass Water Still Heating Mantles Multicell Ageing Oven
Heavy Duty Oven Water Bath Soxhlet Extraction Heater Tray Dryers
Drying Oven Shaker Water Bath Heating Cord Drum Heaters

Colpak

Recommended

Recommended

More Related Content

Viewers also liked

Viewers also liked (7)

Similar to Colpak

Similar to Colpak (20)

Recently uploaded

Recently uploaded (20)

Colpak