Properties of eva film glass laminating machine
•
0 likes•407 views
This document discusses key properties of EVA film glass laminating machines, including: - Machines can have one or multiple laminating beds depending on needs. - Heating pipes should have sufficient power like 2400W to laminate glass efficiently without bubbles. - Fan-well-proportioned heating helps maintain even interior temperatures. - Silicon bags must seal properly during lamination and vacuuming pumps must effectively remove bubbles. - Temperature detectors are typically placed on bag surfaces rather than inside to accurately measure heat. - Some machines can laminate both EVA and PVB films.
Recommended
Recommended
More Related Content
Viewers also liked
Viewers also liked (12)
Similar to Properties of eva film glass laminating machine
Similar to Properties of eva film glass laminating machine (20)
More from CNC Glass Interlayer(China)
More from CNC Glass Interlayer(China) (20)
Recently uploaded
Recently uploaded (20)
Properties of eva film glass laminating machine
- 1. Properties of EVA Film Glass Laminating Machine www.cncglass.com
- 2. Properties of EVA Film Glass Laminating Machine
- 3. Properties of EVA Film Glass Laminating Machine
- 4. Properties of EVA Film Glass Laminating Machine • How many beds (layers) inside the machine? • Some glass laminating machine manufacturer produces machine with only one bed. But some manufacture the machine with two or more laminating beds. You can choose the kind that is suitable for you.
- 5. Properties of EVA Film Glass Laminating Machine
- 6. Properties of EVA Film Glass Laminating Machine • The heating pipe • Where is the heating pipe and how much power of the heating pipe? The power of the heating pipe usually is 2400 w. If the power of the heating pipe is too low, than it would takes long time to produce the laminated glass, and the producing efficiency is low. If the power of the heating pipe is too high, it’s easy to cause the bubbles of the laminating glass.
- 7. Properties of EVA Film Glass Laminating Machine
- 8. Properties of EVA Film Glass Laminating Machine • Is the fan-well-proportioned heating? • This is very important. If the glass laminating machine is the fan-well-proportioned heating, the temperature of inside the oven is average, which is best for glass laminating.
- 9. Properties of EVA Film Glass Laminating Machine • Silicon bag • The place of the vacuuming hole of the silicon bag and how is the silicon bag be sealed when laminating.
- 10. Properties of EVA Film Glass Laminating Machine • Vacuuming Pump • This part mainly effect whether the bubbles come inside laminating glass. It is separated in to the water-cooled and oil- cooled. Please pay attention to whether the vacuuming ability is high enough.
- 11. Properties of EVA Film Glass Laminating Machine • The temperature detector • Where is the detector putted? On the surface of the silicon bag or inside the silicon bag? Usually it is on the surface of the silicon bag. The place the detector is putted may cause the difference between the temperature you read and the real temperature of the laminated glass.
- 12. Properties of EVA Film Glass Laminating Machine • Laminating the EVA FILM and PVB FILM at the same machine • Some China glass laminating manufacturer has invented a machine which can laminated with EVA FILM and PVB FILM.
- 13. Properties of EVA Film Glass Laminating Machine All rights reserved by CNC GLASS INTERLAYER TECH WWW.CNCGLASS.COM CNC@CNCGLASS.COM BENEXT77@GMAIL.COM 008615013829504 Skype: CNEXT365 Wechat: WECAN365 Line: CNCGLASS EVA film for laminated glass, PVB film, PDLC smart galss film, Glass hardware,
- 14. Properties of EVA Film Glass Laminating Machine