1. 1250-SERIES Data Sheet Ref. No : SU-1250-00001
Electrically Operated Butterfly MODEL NO.:
1250200WAFCISGBNPN16
SUDE
Valve Technical Specifications PUNE BANGALORE
LINSD-4000-20-EPOT2LSWCP
CPT200
Quotation Ref. No
Quotation Date :
1. ITEM Assembly Of 2 Way Butterfly Valve Fitted With Sdtork Make 3
Phase Electrical Actuator.
2. MAKE SUDE
3 APPLICATION Water Industries
6 TECHNICAL SPECIFICATION OF 2 WAY BUTTERFLY VALVE
Valve Size 200mm
End connection Wafer, Flangeless Suitable for Holding between flanges
Body Material Cast Iron
Disc Material SG Iron
Seating material Nitrile
Flowing medium Water
Pressure 10 kg/cm2
Operating Angle 90*
Type of design PN16 Construction
Temperature Ambient
Characteristic Linear up to 60* Opening
Sdtork Make Three Phase Electrical Reversible Stayput Type
Actuator, Supply Voltage: 415 volts 3 Phase AC Actuator is
in built with Local Position Indicator & Hand Wheel For
Fitted with manual Operation. Type Of Actuator: Splash Proof Direct on
Valve, IP67 Construction. Also Supplied With 3 Phase Panel
Having Input Signal: 415 volts 3 Phase AC & 4-20mA
Output Signal: 4-20mA
3.
ACTUATOR DETAILS
4.1 Series 4000
4.2 Model SD-4000-20-E
4.3 Out Put motion. Quarter Turn
4.4 Rated output Torque – Kg-m 200 Nm
4.5 Effective Output Speed-RPM 1.24 RPM
4.6 Output coupling E-Type
4.7 Diameter of stem As Per Valve Requirement

2. 4.8 Stroke 0 - 90˚
4.9 Time of operations – Sec /90˚ 12 sec./90 deg.
4.10 Manual over-ride Provided-Hand wheel with auto declutching
arrangement
4.11 Travel Limit Switches Qty : 2 nos., Contacts :
Rating: 5A-250 VAC/0.46A-250VDC.
4.12 Torque Limit Switches. Qty : 2 nos., Contacts :
Rating: 5A-250 VAC/0.46A-250VDC.
4.13 Local Position Indicator. Provided Continuous type.
4.14 Class of Protection. IP67
4.15 Duty Regulating
4.16 Weight of the actuator.
50 kg’s
4.17 Mounting Dimensions
4.18 Area of Operation
4.19 Wiring Diagram
5 MOTOR DETAILS
5.1 Type. TEFC Induction Motor.
5.2 Supply 415 V AC 50 Hz 3 Phase
5.3 Duty Regulating
5.4 Insulation Class F
5.5 Rating
5 OPTIONAL ACCESSORIES
5.1 Feedback Out put : 100-235 Ohms Provided
Potentiometer
5.2 Additional Limit Qty : 2 nos. Provided
Switches Type : 1 NO + 1 NC, Change over
contact, Contact rating: 5 A, 230VAC
5.3 Two Wire Transmitter Type : Two wire, Actuator mounted Provided
Supply : 12-36 VDC, Output : 4-20 m A
5.4 Remote Position Available in servo controller Provided
indicator Digital : 0-100 %
5.5 Servo controller Input signal : 4-20 m A, Output : 4-20 m Provided
(Valve positioner) A
Panel Mounted Feed back : 0-500 Ohms, supply 230 V
AC, This will have auto calibration
facility.
5.6 Interface Card Input signal : 4-20 m A, Provided
Actuator Mounted Feed back : 100-235 Ohms,
5.6 Control Panel / Integral starter inbuilt in panel Provided
Integral Starter
5.7 Local Push Button Provided
Station

3. 5.8 Space Heater Not Provided
5.9 Thermostat Not Provided
6. GENERAL POINTS
6.1 Scope Of Supply Actuator with above accessories
6.2 Inspection By the Customer at our works
6.3 Test Certificates & 2 Sets with Unit
Manuals
6.4 Warranty 18 months from the date of supply or 12 months from the
date of installation whichever is earlier.
6.5 Painting RAL 5021
6.6 Packing Wooden Box packing – On demand
SPECIAL NOTES:

4. 1250-SERIES Data Sheet Ref. No : SU-1250-00001
Electrically Operated Butterfly MODEL NO.:
1250200WAFCISGBNPN16
SUDE
Valve Technical Specifications PUNE / BANGALORE
ONFSD-4000-20-E2LS
Quotation Ref. No
Quotation Date :
1. ITEM Assembly Of 2 Way Butterfly Valve Fitted With Sdtork
Make 3 Phase Electrical Actuator.
2. MAKE SUDE
3 APPLICATION Water Industries
6 TECHNICAL SPECIFICATION OF 2 WAY BUTTERFLY VALVE
Valve Size 200mm
End connection Wafer, Flangeless Suitable for Holding between flanges
Body Material Cast Iron
Disc Material SG Iron
Seating material Nitrile
Flowing medium Water
Pressure 10 kg/cm2
Operating Angle 90*
Type of design PN16 Construction
Temperature Ambient
Characteristic On/Off Type
Sdtork Make Three Phase Electrical Reversible Stayput
Type Actuator, Supply Voltage: 415 volts 3 Phase AC
Actuator is in built with Local Position Indicator & Hand
Fitted with
Wheel For manual Operation. Type Of Actuator: Splash
Proof Direct on Valve, IP67 Construction. Supply
Voltage: 415 volts 3 Phase AC .
3.
ACTUATOR DETAILS
4.1 Series 4000
4.2 Model SD-4000-20-E
4.3 Out Put motion. Quarter Turn
4.4 Rated output Torque – Kg-m 200 Nm
4.5 Effective Output Speed-RPM 1.24 RPM
4.6 Output coupling E-Type
4.7 Diameter of stem As Per Valve Requirement
4.8 Stroke 0 - 90˚

5. 4.9 Time of operations – Sec /90˚ 12 sec/90˚
4.10 Manual over-ride Provided-Hand wheel with auto declutching
arrangement
4.11 Travel Limit Switches Qty : 2 nos., Contacts :
Rating: 5A-250 VAC/0.46A-250VDC.
4.12 Torque Limit Switches. Qty : 2 nos., Contacts :
Rating: 5A-250 VAC/0.46A-250VDC.
4.13 Local Position Indicator. Provided Continuous type.
4.14 Class of Protection. IP67
4.15 Duty On/Off Type
4.16 Weight of the actuator.
50 kg’s
4.17 Mounting Dimensions
4.18 Area of Operation
4.19 Wiring Diagram
5 MOTOR DETAILS
5.1 Type. TEFC Induction Motor.
5.2 Supply 415 V AC 50 Hz 3 Phase
5.3 Duty On/Off Type
5.4 Insulation Class F
5.5 Rating 1 Hp
5 OPTIONAL ACCESSORIES
5.1 Feedback Out put : 100-235 Ohms Provided
Potentiometer
5.2 Additional Limit Qty : 2 nos. Provided
Switches Type : 1 NO + 1 NC, Change over contact,
Contact rating: 5 A, 230VAC
5.3 Two Wire Transmitter Type : Two wire, Actuator mounted Not Provided
Supply : 12-36 VDC, Output : 4-20 m A
5.4 Remote Position Available in servo controller Not Provided
indicator Digital : 0-100 %
5.5 Servo controller Input signal : 4-20 m A, Output : 4-20 m A Not Provided
(Valve positioner) Feed back : 0-500 Ohms, supply 230 V AC,
Panel Mounted This will have auto calibration facility.
5.6 Interface Card Input signal : 4-20 m A, Not Provided
Actuator Mounted Feed back : 100-235 Ohms,
5.6 Control Panel / Integral starter inbuilt in control panel Not Provided
Integral Starter
5.7 Local Push Button Not Provided
Station
5.8 Space Heater Not Provided

6. 5.9 Thermostat Not Provided
6. GENERAL POINTS
6.1 Scope Of Supply Actuator with above accessories
6.2 Inspection By the Customer at our works
6.3 Test Certificates & 2 Sets with Unit
Manuals
6.4 Warranty 18 months from the date of supply or 12 months from
the date of installation whichever is earlier.
6.5 Painting RAL 5021
6.6 Packing Wooden Box packing – On demand
SPECIAL NOTES:

7. 1258-SERIES Data Sheet Ref. No : SU-1258-00001
Electrically Operated Plastic MODEL NO.:
1258200WAFPVCPVCEPN16
SUDE
Butterfly Valve Technical PUNE / BANGALORE
PROPSD-4000-20-
Specifications E2LSPOTCPT200WCP
Quotation Ref. No.
Quotation Date :
1. ITEM Assembly Of 2 Way Plastic Butterfly Valve Fitted With Sdtork
Make 3 Phase Electrical Actuator.
2. MAKE SUDE
3 APPLICATION Chemical Industries
6 TECHNICAL SPECIFICATION OF 2 WAY BUTTERFLY VALVE
Valve Size 200mm
End connection Wafer, Flangeless Suitable for Holding between flanges
Body Material PVC
Disc Material PVC
Seating material EPDM
Flowing medium Chemical
Pressure 10 kg/cm2
Operating Angle 90*
Type of design PN16 Construction
Temperature Ambient
Characteristic Proportionate
Sdtork Make Three Phase Electrical Reversible Stayput
Type Actuator, Supply Voltage: 415 volts 3 Phase AC
Actuator is in built with Local Position Indicator & Hand
Fitted with
Wheel For manual Operation. Type Of Actuator: Splash
Proof Direct on Valve, IP67 Construction. Supply
Voltage: 415 volts 3 Phase AC .
3.
ACTUATOR DETAILS
4.1 Series 4000
4.2 Model SD-4000-20-E
4.3 Out Put motion. Quarter Turn
4.4 Rated output Torque – Kg-m 200 Nm
4.5 Effective Output Speed-RPM 1.24 RPM
4.6 Output coupling E-Type
4.7 Diameter of stem As Per Valve Requirement
4.8 Stroke 0 - 90˚

8. 4.9 Time of operations – Sec /90˚ 12 sec/90˚
4.10 Manual over-ride Provided-Hand wheel with auto declutching
arrangement
4.11 Travel Limit Switches Qty : 2 nos., Contacts :
Rating: 5A-250 VAC/0.46A-250VDC.
4.12 Torque Limit Switches. Qty : 2 nos., Contacts :
Rating: 5A-250 VAC/0.46A-250VDC.
4.13 Local Position Indicator. Provided Continuous type.
4.14 Class of Protection. IP67
4.15 Duty On/Off Type
4.16 Weight of the actuator.
50 kg’s
4.17 Mounting Dimensions
4.18 Area of Operation
4.19 Wiring Diagram
5 MOTOR DETAILS
5.1 Type. TEFC Induction Motor.
5.2 Supply 415 V AC 50 Hz 3 Phase
5.3 Duty On/Off Type
5.4 Insulation Class F
5.5 Rating 1 Hp
5 OPTIONAL ACCESSORIES
5.1 Feedback Out put : 100-235 Ohms Provided
Potentiometer
5.2 Additional Limit Qty : 2 nos. Provided
Switches Type : 1 NO + 1 NC, Change over contact,
Contact rating: 5 A, 230VAC
5.3 Two Wire Transmitter Type : Two wire, Actuator mounted Provided
Supply : 12-36 VDC, Output : 4-20 m A
5.4 Remote Position Available in servo controller Inbuilt
indicator Digital : 0-100 %
5.5 Servo controller Input signal : 4-20 m A, Output : 4-20 m A Provided
(Valve positioner) Feed back : 0-500 Ohms, supply 230 V AC,
Panel Mounted This will have auto calibration facility.
5.6 Interface Card Input signal : 4-20 m A, Provided
Actuator Mounted Feed back : 100-235 Ohms,
5.6 Control Panel / Integral starter provided in the panel Provided
Integral Starter
5.7 Local Push Button Provided
Station
5.8 Space Heater Not Provided

9. 5.9 Thermostat Not Provided
6. GENERAL POINTS
6.1 Scope Of Supply Actuator with above accessories
6.2 Inspection By the Customer at our works
6.3 Test Certificates & 2 Sets with Unit
Manuals
6.4 Warranty 18 months from the date of supply or 12 months from the
date of installation whichever is earlier.
6.5 Painting RAL 5021
6.6 Packing Wooden Box packing – On demand
SPECIAL NOTES:

10. 1258-SERIES Data Sheet Ref. No : SU-1258-00002
Electrically Operated Plastic MODEL NO.:
1258200WAFPVCPVCEPN16
SUDE
Butterfly Valve Technical PUNE / BANGALORE
ONFSD-4000-20-E2LS
Specifications
Quotation Ref. No.
Quotation Date :
1. ITEM Assembly Of 2 Way Plastic Butterfly Valve Fitted With Sdtork
Make 3 Phase Electrical Actuator.
2. MAKE SUDE
3 APPLICATION
6 TECHNICAL SPECIFICATION OF 2 WAY BUTTERFLY VALVE
Valve Size 200mm
End connection Wafer, Flangeless Suitable for Holding between flanges
Body Material PVC
Disc Material PVC
Seating material EPDM
Flowing medium Chemical
Pressure 10 kg/cm2
Operating Angle 90*
Type of design PN16 Construction
Temperature Ambient
Characteristic On/Off Type
Sdtork Make Three Phase Electrical Reversible Stayput
Type Actuator, Supply Voltage: 415 volts 3 Phase AC
Actuator is in built with Local Position Indicator & Hand
Fitted with
Wheel For manual Operation. Type Of Actuator: Splash
Proof Direct on Valve, IP67 Construction. Supply
Voltage: 415 volts 3 Phase AC .
3.
ACTUATOR DETAILS
4.1 Series 4000
4.2 Model SD-4000-20-E
4.3 Out Put motion. Quarter Turn
4.4 Rated output Torque – Kg-m 200 Nm
4.5 Effective Output Speed-RPM 1.24 RPM
4.6 Output coupling E-Type
4.7 Diameter of stem As Per Valve Requirement
4.8 Stroke 0 - 90˚

11. 4.9 Time of operations – Sec /90˚ 12 sec/90˚
4.10 Manual over-ride Provided-Hand wheel with auto declutching
arrangement
4.11 Travel Limit Switches Qty : 2 nos., Contacts :
Rating: 5A-250 VAC/0.46A-250VDC.
4.12 Torque Limit Switches. Qty : 2 nos., Contacts :
Rating: 5A-250 VAC/0.46A-250VDC.
4.13 Local Position Indicator. Provided Continuous type.
4.14 Class of Protection. IP67
4.15 Duty On/Off Type
4.16 Weight of the actuator.
50 kg’s
4.17 Mounting Dimensions
4.18 Area of Operation
4.19 Wiring Diagram
5 MOTOR DETAILS
5.1 Type. TEFC Induction Motor.
5.2 Supply 415 V AC 50 Hz 3 Phase
5.3 Duty On/Off Type
5.4 Insulation Class F
5.5 Rating 1 Hp
5 OPTIONAL ACCESSORIES
5.1 Feedback Out put : 100-235 Ohms Not Provided
Potentiometer
5.2 Additional Limit Qty : 2 nos. Provided
Switches Type : 1 NO + 1 NC, Change over contact,
Contact rating: 5 A, 230VAC
5.3 Two Wire Transmitter Type : Two wire, Actuator mounted Not Provided
Supply : 12-36 VDC, Output : 4-20 m A
5.4 Remote Position Available in servo controller Not Provided
indicator Digital : 0-100 %
5.5 Servo controller Input signal : 4-20 m A, Output : 4-20 m A Not Provided
(Valve positioner) Feed back : 0-500 Ohms, supply 230 V AC,
Panel Mounted This will have auto calibration facility.
5.6 Interface Card Input signal : 4-20 m A, Not Provided
Actuator Mounted Feed back : 100-235 Ohms,
5.6 Control Panel / Refer Basic Specification Sheet Not Provided
Integral Starter
5.7 Local Push Button Refer Basic Specification Sheet Not Provided
Station
5.8 Space Heater Not Provided

12. 5.9 Thermostat Not Provided
6. GENERAL POINTS
6.1 Scope Of Supply Actuator with above accessories
6.2 Inspection By the Customer at our works
6.3 Test Certificates & 2 Sets with Unit
Manuals
6.4 Warranty 18 months from the date of supply or 12 months from the
date of installation whichever is earlier.
6.5 Painting RAL 5021
6.6 Packing Wooden Box packing – On demand
SPECIAL NOTES:

13. 1260-SERIES Data Sheet Ref. No :SU-1260-00001
Pneumatically Operated Butterfly MODEL NO.:
1260200WAFCIS6BNPN10
SUDE
Valve Technical Specifications PUNE / BANGALORE
LINDA20EPPOSPT-FB
Quotation Ref. No
Quotation Date
1. ITEM Assembly of 2 Way Butterfly Valve Fitted With Pneumatic
Rotary Double Acting Actuator
2. MAKE SUDE
3 APPLICATION Water Industries
6 TECHNICAL SPECIFICATION OF 2 WAY BUTTERFLY VALVE
Valve Size 200mm
End connection Wafer, Flangeless Suitable for Holding between flanges
Body Material Cast Iron
Disc Material SS316
Seating material Buna Nitrile
Flowing medium Water
Pressure 10 Bar
Type of design PN10 Construction
Temperature 80oC
Characteristic Linear
Sude Make Pneumatic DA20 Double Acting Actuator,
Fitted with Signal Pressure: 5.5 to 8.5 bar, Quality of air: Filtered &
Clean dry air
4 PNEUMATIC ACTUATOR DETAILS
4.1 Type Double
4.2 Model DA20
4.3 Spring Clip Steel
4.4 Double Acting Cap Aluminium Alloy
4.5 Cap O-Ring N.B.R
4.6 Piston Polyarilamide
4.7 Cylinder Aluminium Alloy
4.8 Washer Polyamide
4.9 Spring Clip Steel
4.9 Position Indicator Polyamide
4.10 Piston Guide Polyacetal
4.11 Guide Ring Polyacetal
4.12 Piston O-Ring N.B.R
4.13 O-Ring N.B.R
4.14 Springs Set DIN-17223-C
4.15 Spring Return Cap Aluminium Alloy
4.16 Shaft AISI-303 Stainless Steel
4.17 Signal Pressure 5.5 to 8.5 Bar
4.18 Quality Of Air Filtered and Clean dry air
4.19 Opening and Closing Time 0.65 [Open] & 0.55 [Close]

14. 5 OPTIONAL ACCESSORIES
5.1 2 Wire Position Provided
Transmitter
5.2 Siemens Electro Having Input signal: 4-20mA & Output signal: Provided
Pneumatic 4-20mA, Inlet Pressure: 6 Bar, Quality of air:
Filtered Dry & Clean Air.
Positioner
6 GENERAL POINTS
6.1 Inspection By Customer at our works
6.2 T. C.& Manuals 2 Sets with unit
6.3 Warranty 18 months from the date of supply or 12 months from the date of
installation which ever is earlier.
6.4 Packing Thermo cool Packing Housed in corrugated Box
SPECIAL NOTE :

15. 1260-SERIES Data Sheet Ref. No : SU-1260-00002
Pneumatically Operated Butterfly MODEL NO.:
1260200WAFCIS6BNPN10ONFDA20
SUDE
Valve Technical Specifications PUNE / BANGALORE
1184D4W5P2PDCPOP066.0BSPALS4
BNSPC1230VACGPALRAFRWPLSB
Quotation Ref. No
Quotation Date
1. ITEM Assembly of 2 Way Butterfly Valve Fitted With Pneumatic
Rotary Double Acting Actuator
2. MAKE SUDE
3 APPLICATION Water Industries
6 TECHNICAL SPECIFICATION OF 2 WAY BUTTERFLY VALVE
Valve Size 200mm
End connection Wafer, Flangeless Suitable for Holding between flanges
Body Material Cast Iron
Disc Material SS316
Seating material Buna Nitrile
Flowing medium Water
Pressure 10 Bar
Type of design PN10 Construction
Temperature 80oC
Characteristic On / Off Type
Sude Make Pneumatic DA20 Double Acting Actuator,
Fitted with Signal Pressure: 5.5 to 8.5 bar, Quality of air: Filtered
and Lubricated
4 PNEUMATIC ACTUATOR DETAILS
4.1 Type Double
4.2 Model DA20
4.3 Spring Clip Steel
4.4 Double Acting Cap Aluminium Alloy
4.5 Cap O-Ring N.B.R
4.6 Piston Polyarilamide
4.7 Cylinder Aluminium Alloy
4.8 Washer Polyamide
4.9 Spring Clip Steel
4.9 Position Indicator Polyamide
4.10 Piston Guide Polyacetal
4.11 Guide Ring Polyacetal
4.12 Piston O-Ring N.B.R
4.13 O-Ring N.B.R
4.14 Springs Set DIN-17223-C
4.15 Spring Return Cap Aluminium Alloy
4.16 Shaft AISI-303 Stainless Steel
4.17 Signal Pressure 5.5 to 8.5 Bar
4.18 Quality Of Air Filtered and Lubricated
4.19 Opening and Closing Time 0.65 [Open] & 0.55 [Close]

16. 5 OPTIONAL ACCESSORIES
5.1 4 Way 5 Port 2 Of Size ¼”, Aluminum Body, BSP Screwed Provided
Position Double Having Coil voltage of 230 V AC in General
Purpose Housing
Coil Solenoid Valve
5.2 Air Lock relay Of ¼” Size Provided
5.3 Air Filter Regulator Of ¼” Size Supplied With Gauges Provided
5.4 Weather Proof Consisting of 2 nos micro switches having 1 NO Provided
Limit Switch Box + 1 NC Contacts for Sensing End Position of
the Valve
6 GENERAL POINTS
6.1 Inspection By Customer at our works
6.2 T. C.& Manuals 2 Sets with unit
6.3 Warranty 18 months from the date of supply or 12 months from the date of
installation which ever is earlier.
6.4 Packing Thermo cool Packing Housed in corrugated Box
SPECIAL NOTE :

17. 1268-SERIES Data Sheet Ref. No : SU-1268-00001
Pneumatically Operated Plastic MODEL NO.:
1268200WAFPVCPVCELINDA2
SUDE
Butterfly Valve Technical PUNE / BANGALORE
0EP POSPT-FB
Specifications
Quotation Ref. No
Quotation Date
1. ITEM Assembly of 2 Way Plastic Butterfly Valve Fitted With
Pneumatic Rotary Double Acting Actuator
2. MAKE SUDE
3 APPLICATION Chemical Industries
6 TECHNICAL SPECIFICATION OF 2 WAY BUTTERFLY VALVE
Valve Size 200mm
End connection Wafer, Flangeless Suitable for Holding between flanges
Body Material PVC
Disc Material PVC
Seating material EPDM
Flowing medium Chemical
Pressure 10 Bar
Temperature 80oC
Characteristic Linear
Sude Make Pneumatic DA20 Double Acting Actuator, Signal
Fitted with Pressure: 5.5 to 8.5 bar, Quality of air: Filtered & Clean
dry air
4 PNEUMATIC ACTUATOR DETAILS
4.1 Type Double
4.2 Model DA20
4.3 Spring Clip Steel
4.4 Double Acting Cap Aluminium Alloy
4.5 Cap O-Ring N.B.R
4.6 Piston Polyarilamide
4.7 Cylinder Aluminium Alloy
4.8 Washer Polyamide
4.9 Spring Clip Steel
4.9 Position Indicator Polyamide
4.10 Piston Guide Polyacetal
4.11 Guide Ring Polyacetal
4.12 Piston O-Ring N.B.R
4.13 O-Ring N.B.R
4.14 Springs Set DIN-17223-C
4.15 Spring Return Cap Aluminium Alloy
4.16 Shaft AISI-303 Stainless Steel
4.17 Signal Pressure 5.5 to 8.5 Bar
4.18 Quality Of Air Filtered
4.19 Opening and Closing 0.65 [Open] & 0.55 [Close]
Time
5 OPTIONAL ACCESSORIES

18. 5.1 Position Provided
Transmitter
5.2 Siemens make Having Input Signal: 60 PSI & 4-20mA, Output Provided
Electro Pneumatic signal: 4-20mA
Positioner
6 GENERAL POINTS
6.1 Inspection By Customer at our works
6.2 T. C.& Manuals 2 Sets with unit
6.3 Warranty 18 months from the date of supply or 12 months from the date of installation
which ever is earlier.
6.4 Packing Thermo cool Packing Housed in corrugated Box
SPECIAL NOTE :

19. 1268-SERIES Data Sheet Ref. No : SU-1268-00002
Pneumatically Operated MODEL NO.:
1268200WAFPVCPVCEONFDA201
SUDE
Plastic Butterfly Valve PUNE / BANGALORE
Technical Specifications 184D4W5P2PSCPOP066.0BSPALS4BNS
PC1230VACGPWPLSB
Quotation Ref. No
Quotation Date
1. ITEM Assembly of 2 Way Plastic Butterfly Valve Fitted With Pneumatic
Rotary Double Acting Actuator
2. MAKE SUDE
3 APPLICATION Chemical Industries
6 TECHNICAL SPECIFICATION OF 2 WAY BUTTERFLY VALVE
Valve Size 200mm
End connection Wafer, Flangeless Suitable for Holding between flanges
Body Material PVC
Disc Material PVC
Seating material EPDM
Flowing medium Chemical
Pressure 10 Bar
Temperature 80oC
Characteristic On / Off type
Sude Make Pneumatic DA20 Double Acting Actuator, Signal
Fitted with Pressure: 5.5 to 8.5 bar, Quality of air: Filtered and
Lubricated
4 PNEUMATIC ACTUATOR DETAILS
4.1 Type Double
4.2 Model DA20
4.3 Spring Clip Steel
4.4 Double Acting Cap Aluminium Alloy
4.5 Cap O-Ring N.B.R
4.6 Piston Polyarilamide
4.7 Cylinder Aluminium Alloy
4.8 Washer Polyamide
4.9 Spring Clip Steel
4.9 Position Indicator Polyamide
4.10 Piston Guide Polyacetal
4.11 Guide Ring Polyacetal
4.12 Piston O-Ring N.B.R
4.13 O-Ring N.B.R
4.14 Springs Set DIN-17223-C
4.15 Spring Return Cap Aluminium Alloy
4.16 Shaft AISI-303 Stainless Steel
4.17 Signal Pressure 5.5 to 8.5 Bar
4.18 Quality Of Air Filtered and Lubricated
4.19 Opening and Closing 0.65 [Open] & 0.55 [Close]
Time

20. 5 OPTIONAL
ACCESSORIES
5.1 4 Way 5 Port Of ¼” size having Aluminum body with Coil voltage Provided
Single coil 2 of 230 V AC Supply
position poppet
type solenoid
valve
5.2 Weather Proof Consisting of 2 nos micro switches having 1 NO + 1 Provided
Limit switch box NC contacts for sensing end position of the valve
6 GENERAL POINTS
6.1 Inspection By Customer at our works
6.2 T. C.& Manuals 2 Sets with unit
6.3 Warranty 18 months from the date of supply or 12 months from the date of installation
which ever is earlier.
6.4 Packing Thermo cool Packing Housed in corrugated Box
SPECIAL NOTE :