1. How to Print with
Dragon Printer on Your
iPad
Make sure you have downloaded the free
Dragon Printer app from the app store.

2. 1. Open the drawer by tapping on the lines.
2. Tap on Printer Wizard.

3. 3. Tap on the printer in the upper right
corner.

4. 4. Tap on “Specify IP.”

5. 5. Type the printers IP address into the
IP box.

6. 6. Tap on “Done” on your keyboard and
wait for the “Model” and “Location”
boxes to fill.

7. 7. After the boxes fill tap on Add (Print Test
Page). A test page will print. If you can see all
the words on the test page, even though the
image is cut off, all is good. Tap on yes.

8. 8. Your printer’s IP
address will appear.

9. 9. You can print anything in your camera
roll from the Dragon Printer app by
tapping on Photos.

10. 10. Then tap on Print.

11. 11. A preview of what you are printing
will appear.

12. 12. Tap on the gear to change
orientation, scale, and paper size.

13. 13. Tap on the printer to adjust copies
and page range. Then tap Print.

14. Note: Since this is a free app
ads will appear periodically.
Just tap the X to close them.

15. Many apps will allow you to print from
within the app. Here’s how:
1. Tap on the Wrench and/or Share
button (it will vary depending on the
app).

16. 2. Tap on “Open in Another
App.”

17. 3. If given a
choice, choose PDF.

18. 4. Tap on Choose App.
Then choose Dragon Printer.

19. 5. The document will open in Dragon
Printer with a preview of what the
printed document will look like.

20. 6. Tap the share button in
the upper right corner. Tap
on Print.

21. 7. Choose the correct printer
from the list of IP addresses.

22. 8. Choose your
orientation and size.

23. 9. Choose your copies and
page range. Then print!