Model Call Girl in Lado Sarai Delhi reach out to us at 🔝9953056974🔝
How to make a vag com cable – obd2 support
1. car diagnostic Software installation report-
AUTOCOM 2013.1
1. Nagios:xp/win7/win8
2.Install the software steps
1) 1st Step:
Pls install 2013.1 delphisoftware
2)Step:
Open “Autocom Delphi Patcher v2013.1”, Then click "manual Patch", replace
Main in the installation directory
2. 3)Step:
Open “AutocomDelphiPatch”, choose installation folder "DS150E (New VCI)",
and click "Ok"
4)Step:
Open well-installed "DS150E (New VCI)", click next step into activation page,
Open “AGK2131”, input 100251 in Serial column, choose “Delphi” in brand Column,
click "Generate", input well-activated hardwarekey and serial number into
registrated page. click Ok.
3. 5)Finish
3. Actual Test or ECU Demo Steps
(1)Test vehicles or ECU name 2004 Toyato Camry
(2)Detailed steps
Autocom 2013 Introduction:
Interface: There are two interfaces in total. One end is used to connect the PC
via USB; other end should be plugged into the vehicle directly.
4. Facade: 18 cm in length; 7 cm in width; black; plastic case.
Autocom 2013 Actual Test
First, connect the device with the USB interface of PC via USB cable
Second, plug another interface of the device into vehicle (ECU interface).
Third, start the ignition device of vehicle.
Third, start the Autocom 2013 software.
4. Possible problems and solutions
INSTALL XP
Before install the new version 2013.R1 (Autocom/Delphi)
1.First uninstall previous versions
.
2.Delete the following folders:
WINDOWS XP:
C:ProgramsAutocom
C:ProgramsDelphi
C:Documents and SettingsAll UsersApplication DataAutocom
C:Documents and SettingsAll UsersApplication DataDelphi
C:Documents and Settings**USER**Application DataAutocom
C:Documents and Settings**USER**Application DataDelphi
C:Documents and Settings**USER**Application
DataMicrosoftSystemCertificatesMy
C:Documents and SettingsDefault UserApplication
DataMicrosoftSystemCertificatesMy
C:Documents and SettingsLocalServiceApplication
DataMicrosoftSystemCertificatesMy
C:Documents and SettingsNetworkServiceApplication
DataMicrosoftSystemCertificatesMy
WINDOWS 7 & 8:
C:Programsx86Autocom
C:Programsx86Delphi
C:users**USER**AppDataRoamingDelphi
C:users**USER**AppDataRoamingAutocom
C:users**USER**AppDataRoamingMicrosoftSystemCertificatesMy
OTHER OS:
Look similar folders.
.
3.Edit with Notepad:
C:WINDOWSsystem32driversetchosts
5. and delete:
127.0.0.1 activation.autocom.se
127.0.0.1 activation2.autocom.se
.
4.Run CCleaner and clean the registry
.
5.Restart your computer
.
6.Install new version 2013.R1
Article is edited by XCAR360.com original, reproduced please indicate
the source, ths!
6. and delete:
127.0.0.1 activation.autocom.se
127.0.0.1 activation2.autocom.se
.
4.Run CCleaner and clean the registry
.
5.Restart your computer
.
6.Install new version 2013.R1
Article is edited by XCAR360.com original, reproduced please indicate
the source, ths!