Diese Präsentation wurde erfolgreich gemeldet.
Wir verwenden Ihre LinkedIn Profilangaben und Informationen zu Ihren Aktivitäten, um Anzeigen zu personalisieren und Ihnen relevantere Inhalte anzuzeigen. Sie können Ihre Anzeigeneinstellungen jederzeit ändern.

Material used for sandblasting procedure

Sandblasting is the process of using compressed air to propel abrasive media at a surface to clean, a surface for a coating of some sort. http://www.byersbush.com

Ähnliche Bücher

Kostenlos mit einer 30-tägigen Testversion von Scribd

Alle anzeigen

Ähnliche Hörbücher

Kostenlos mit einer 30-tägigen Testversion von Scribd

Alle anzeigen

Material used for sandblasting procedure

  1. 1. Material used for Sandblasting Procedure
  2. 2. Sandblasting is the process of using compressed air to propel abrasive media at a surface to clean, debur, or to prepare a surface for a coating of some sort. What is Sandblasting ?
  3. 3. Materials used in Sandblasting
  4. 4. • Sand, • Copper slag, • Steel grit, • Powder abrasives, • Small pieces of walnut • Pieces of avocado shells Each of these materials has the requirement of application within the industry.
  5. 5. Types of Sandblasters
  6. 6. Suction feed blaster: Venturi siphoning action is used in suction feed blaster. It draws the blast media into the compressed air stream and then to the nozzle itself. Pressure feed blaster: The media is stored within the pressure pot and later it is sealed. The media goes through the valve and into the compressed air stream, which is placed in the blast nozzle. The nozzle accelerates the media and it impacts the surface of the component.
  7. 7. Contact us Byers bush offer excellent services of sandblasting and powder services. For more info visit at http://www.byersbush.com/ Address: Byers Bush Powder Coating Inc 1300 Fewster Drive, Mississauga, ON L4W 1A4 Tel: 905-625-4334 Fax: 905-625-9862

×