Diese Präsentation wurde erfolgreich gemeldet.
Wir verwenden Ihre LinkedIn Profilangaben und Informationen zu Ihren Aktivitäten, um Anzeigen zu personalisieren und Ihnen relevantere Inhalte anzuzeigen. Sie können Ihre Anzeigeneinstellungen jederzeit ändern.
Pressure washer sandblasting is a 
technique that uses a mix of abrasive 
media and high pressured water to wear 
down a s...
In pressure washer sandblasting, a probe 
draws the abrasive media into the power 
washer extension wand, where water will...
Before starting a job, you want to 
consider the equipment and materials 
needed. Professional equipment comes 
in many di...
Round Media types include glass bead, ceramic, and metal 
shot. These media clean, smooth, brighten, and descale 
surfaces...
Fine Angular Aluminum Oxide slurry can really deep clean 
and get into the pores of surfaces. This slurry leaves an even, ...
Pressure washer sandblasting is a 
messy process. As the media shoots 
out of the hose and against the 
surface, it bounce...
Remember to never point the nozzle toward 
anyone. The nozzle should always point 
downward when in use and the media supp...
Pressure water sandblasting takes practice to 
perform properly. Before you begin an important 
project, practice and impr...
Big A’s Place is a convenient provider for all of 
your blasting supply needs, including helmets, 
hoses, gear, parts, and...
Summary 
Pressure water sandblasting is an effective and dustless blasting method that can be 
used for a variety of jobs....
Pressure washer sandbasting
Sie haben dieses Dokument abgeschlossen.
Lade die Datei herunter und lese sie offline.
Nächste SlideShare
Opportunitiesfromenvironmentalsustainabilityupmphilriebelfinal 12700793782597 Phpapp01
Weiter
Nächste SlideShare
Opportunitiesfromenvironmentalsustainabilityupmphilriebelfinal 12700793782597 Phpapp01
Weiter
Herunterladen, um offline zu lesen und im Vollbildmodus anzuzeigen.

Teilen

Pressure washer sandbasting

Herunterladen, um offline zu lesen

http://sandblaster-parts.com|Pressure water sandblasting is an effective and dustless blasting method that can be used for a variety of jobs. You must consider the equipment and abrasive media needed before starting a project since needs will vary based on the type of project at hand. With time and practice, the technique can be mastered.

Ähnliche Bücher

Kostenlos mit einer 30-tägigen Testversion von Scribd

Alle anzeigen

Ähnliche Hörbücher

Kostenlos mit einer 30-tägigen Testversion von Scribd

Alle anzeigen

Pressure washer sandbasting

  1. 1. Pressure washer sandblasting is a technique that uses a mix of abrasive media and high pressured water to wear down a surface. It is becoming popular to minimize the dust a user deals with while sandblasting, and this type of washer is part of that movement. The water prevents dust from forming, which makes the process safer for your lungs.
  2. 2. In pressure washer sandblasting, a probe draws the abrasive media into the power washer extension wand, where water will propel it toward the surface at high speeds. The combination of water and abrasive media blasts away paint, rust, dirt, and other surface coating on the surface you want cleaned or smoothed. Different media are used for pressure washer sandblasting and each one provides a distinctive finish on the surface being cleaned.
  3. 3. Before starting a job, you want to consider the equipment and materials needed. Professional equipment comes in many different varieties, as does the abrasive media. The particular task at hand will determine the appropriate equipment and materials needed.
  4. 4. Round Media types include glass bead, ceramic, and metal shot. These media clean, smooth, brighten, and descale surfaces. When heated, parts can be cleaned of light oils while leaving a bright or matte cosmetic finish. Angular Grit Media includes aluminum oxide, crushed glass, and steel grit. These slurries are used for tough and aggressive projects. Coarse slurry is useful in engine rebuilding, descaling, removing rust, and degreasing parts.
  5. 5. Fine Angular Aluminum Oxide slurry can really deep clean and get into the pores of surfaces. This slurry leaves an even, clean, and abraded finish. As a result, less resin is needed to fill the voids. Plastic Angular Media slurry deflashes plastic parts, and is also used for paint stripping.
  6. 6. Pressure washer sandblasting is a messy process. As the media shoots out of the hose and against the surface, it bounces off the surface and then settles somewhere in your work space. Any delicate surfaces in the immediate area should be removed or placed under protective covering. At the end of the project, there will be plenty of area to clean.
  7. 7. Remember to never point the nozzle toward anyone. The nozzle should always point downward when in use and the media supply line should be above the water line so the water doesn’t enter the media supply. The media hose should always be dry with the media covered throughout the project to prevent any contact with water. At the start of your sandblasting project, hold the wand several feet away from the surface. If you get too close the object can get damaged. As you gain experience, you’ll find the right distance to maintain as you watch the results.
  8. 8. Pressure water sandblasting takes practice to perform properly. Before you begin an important project, practice and improve upon your skills on a comparable surface that isn’t of value to you. Practicing on something that doesn’t hold much significance allows you to perfect your technique without ruining the surface of what you ultimately need to work on.
  9. 9. Big A’s Place is a convenient provider for all of your blasting supply needs, including helmets, hoses, gear, parts, and accessories. Order by phone or online for all of the latest products on the market. Website: http://sandblaster-parts.com Phone: (616) 741-9237
  10. 10. Summary Pressure water sandblasting is an effective and dustless blasting method that can be used for a variety of jobs. You must consider the equipment and abrasive media needed before starting a project since needs will vary based on the type of project at hand. With time and practice, the technique can be mastered.
  • quiron2011

    Mar. 12, 2015

http://sandblaster-parts.com|Pressure water sandblasting is an effective and dustless blasting method that can be used for a variety of jobs. You must consider the equipment and abrasive media needed before starting a project since needs will vary based on the type of project at hand. With time and practice, the technique can be mastered.

Aufrufe

Aufrufe insgesamt

415

Auf Slideshare

0

Aus Einbettungen

0

Anzahl der Einbettungen

2

Befehle

Downloads

7

Geteilt

0

Kommentare

0

Likes

1

×