1. The document discusses alkyl halide reactions including SN1 and SN2 mechanisms. It describes factors that affect the rates of these reactions such as the substrate, leaving group, nucleophile, and solvent.
2. SN1 is a two-step reaction involving a carbocation intermediate. SN2 is a single-step reaction without an intermediate. SN1 reactions result in racemization while SN2 reactions cause inversion of configuration.
3. Tertiary alkyl halides undergo SN1 reactions most readily due to stable carbocation intermediates. Polar protic solvents favor SN1 while polar aprotic solvents favor SN2.
6. Reactivity of alkyl halide
The electronegative halogen atom in alkyl halides creates a polar C—X bond, making the
carbon atom electron deficient.
• C-X bond length increases as you go down periodic table
• C-X bond become weaker as you go down periodic table
Polarized C-X bond
8. Effect of nucleophile
and leaving group on
rate of reaction
Poorleavinggroups
Goodleavinggroups
There are two kinds of
substitution reactions,
called SN1 and SN2.
9. Reactivity of alkyl halide – SN2 Reaction
Bimolecular (or 2nd order) means that the rate of an SN2 reaction is directly proportional
to the molar concentration of two reacting molecules, the alkyl halide ‘substrate’ and
the nucleophile:
Example
14. SN2 Reaction
Factor affecting
rate of an SN2
reaction
The nature of the
substrate (the alkyl
halide)
The ability of the
leaving group to
leave
The power of the
nucleophile
The nature of the
solvent
Nucleophilicity
Solvent
Polarity
15. Factor affecting rate of an SN2 reaction
The nature of the substrate
• Methyl and 1° alkyl halides undergo SN2 reactions with ease.
• 2° Alkyl halides react more slowly.
• 3° Alkyl halides do not undergo SN2 reactions. Steric hindrance
caused by bulky R groups makes nucleophilic attack from the
backside more difficult, slowing the reaction rate.
Anything that decreases the positive charge on the carbon site by
giving electrons, decreases the reaction rate while anything that
increases positive charge on the same by withdrawing electron,
increases the rate of the reaction.
16. Mechanism of SN2 Reactions
activation
energy: DG1
activation
energy: DG2
Steric effect in T.S.
Energy
reaction coordinate reaction coordinate
(higher steric
Effect in T.S.)
17. Factor affecting rate of an SN2 reaction
The power of the nucleophile
The better the nucleophile, the faster the rate of SN2 reactions.
A negatively charged nucleophile is stronger than its neutral counterpart.
Nucleophilicity decreases from left to right in periodic table.
Increases down Periodic Table, as size and polarizability increase.
I
n
c
r
e
a
s
e
s
19. Factor affecting rate of an SN2 reaction
The ability of the leaving group to leave
The best leaving groups are:
- Lower basicity
- Electron-withdrawing, to polarize the carbon atom.
- Stable (weak base) once it has left.
- Polarizable, to stabilize the transition state.
Iodine (-I) is a good leaving group because iodide (I-) is non basic and stabilize their negative charge.
The hydroxyl group (-OH) is a poor leaving group because hydroxide (OH-) is a strong base.
relative rates of reaction pKa HX
HO
- + RCH2I RCH2OH + I
- 30 000 -10
HO
- + RCH2Br RCH2OH + Br
- 10 000 -9
HO
- + RCH2Cl RCH2OH + Cl
- 200 -7
HO
- + RCH2F RCH2OH + F
- 1 3.2
Carbon and iodine, however, have the same electronegativity. Why, then, does an alkyl
iodide undergo a substitution reaction? We know that larger atoms are more polarizable
than smaller atoms.
21. Factor affecting rate of an SN2 reaction
The nature solvent
There are 3 classes of organic solvents:
Protic solvents, which contain –OH or –NH2 groups. Protic solvents slow down SN2 reactions.
Polar aprotic solvents like acetone, which contain strong dipoles but no –OH or –NH2 groups.
Polar aprotic solvents speed up SN2 reactions.
Non polar solvents, e.g., hydrocarbons. SN2 reactions are relatively slow in non polar solvents.
Protic solvents (e.g.,
H2O, MeOH, EtOH,
CH3COOH, etc.) cluster
around the Nu:- (solvate
it) and lower its energy
(stabilize it) and reduce
its reactivity via H-
bonding.
Iodide ion is a better nucleophile than fluoride ion in a protic solvent - extent of solvation.
22. Polar Aprotic Solvents solvate the cation counterion of the nucleophile but not the nucleophile.
Examples include acetonitrile (CH3CN), acetone (CH3COCH3), dimethylformamide (DMF) [(CH3)2NC=OH],
dimethyl sulfoxide, DMSO [(CH3)2SO], hexamethylphosphoramide, HMPA {[(CH3)2N]3PO} and
dimethylacetamide (DMA).
23. The SN1 Reaction
The SN1 reaction is a unimolecular nucleophilic substitution.
It is a two step reaction with a carbocation intermediate.
Rate is first order in the alkyl halide, zero order in the nucleophile.
Racemization occurs.
Key
points
Hydrolysis of tert-butyl
bromide with water
Kinetic Study
Key features of the SN1 mechanism are that it has two steps, and carbocations are
formed as reactive intermediates.
25. Stereochemistry of SN1 reaction
Example
An SN1 reaction of an alkyl halide in which the leaving group is attached to an asymmetric carbon forms
two stereoisomers (enantiomers) because attack of the nucleophile on one side of the planar carbocation
forms one stereoisomer and attack on the other side produces the other stereoisomer.
29. The SN1 Reaction – Factor affecting
Factor affecting
rate of an SN1
reaction
The nature of the
substrate (the alkyl
halide)
The ability of the
leaving group to
leave
The power of the
nucleophile
The nature of the
solvent
Solvent
Polarity
The rate is independent of
the power of the nucleophile
Carbocation
rearrangement
30. Factor affecting rate of an SN1 reaction - The nature of the substrate (the alkyl halide)
The alkyl halide is the only species that participates in the
rate-determining step forming intermediate carbocation.
The greater the carbocation
stability, the higher is the rate
31. They stabilize
carbocations by
donating electron
density by induction
(through s bonds)
Factor affecting rate of an SN1 reaction - The nature of the substrate (the alkyl halide)
They stabilize carbocations
by hyperconjugation (by
partial overlap of the alkyl
C-H bonds with the empty
p-orbital of the
carbocation)
32. Factor affecting rate of an SN1 reaction - The nature of the substrate (the alkyl halide)
Allyl and benzyl halides
also react quickly by
SN1 reactions because
their carbocations are
unusually stable due to
their resonance forms
which delocalize
charge over an
extended system
Resonance
33. Factor affecting rate of an SN1 reaction - The nature of the substrate
(Carbonium rearrangement)
Sec. carbonium
Tert. carbonium
34. Factor affecting rate of an SN1 reaction - The nature of the substrate (the alkyl halide)
The strong nucleophile favors an SN2 mechanism
The weak nucleophile favors an SN1 mechanism
Secondary halides
35. Factor affecting rate of an SN1 reaction
The ability of the leaving group to leave
The best leaving groups are:
- Electron-withdrawing, to polarize the carbon atom.
- Stable (weak base) once it has left.
- Polarizable, to stabilize the transition state.
36. Factor affecting rate of an SN1 reaction
The nature solvent
There are 3 classes of organic solvents:
Protic solvents, which contain –OH or –NH2 groups.
Polar aprotic solvents like acetone, which contain strong dipoles but no –OH or –NH2
groups.
Non polar solvents, e.g., hydrocarbons.
• Polar protic solvents like H2O and
ROH favor SN1 reactions because the
ionic intermediates (both cations and
anions) are stabilized by solvation.
• Polar aprotic solvents favor SN2
reactions because nucleophiles are
not well solvated, and therefore, are
more nucleophilic.
37. Cl
_
H
H
O
H
H
O
H
H
O
H
H
O
d +
d +
d +
d +
C
+
H
H
O
H
H
O
H
H
OH
H O
H
H
O
H
H
O
d _
d _
d _
d _
d _
d _
sp2
trigonal planar
C
R
R
R
Cl C
R
RR
Cl
d _
d +
H
H
O
H H
O
H
H
O
H
H O
H
H
O
H
H
O
‡
sp3
tetrahedral
Factor affecting rate of an SN1 reaction
The nature solvent
38. Comparison between SN1 and SN2 reaction mechanism
SN2 reaction mechanism SN1 reaction mechanism
One step mechanism Two step mechanism
Bimolecular reaction Unimolecular reaction
Product formation takes place by TS Product formation takes place by carbocation
intermediate
No carbocation rearrangement Carbocation rearrangement
Reaction is favoured by polar aprotic solvents Reaction is favoured by polar protic solvents
Given mainly by methyl halides Given mainly by tertiary alkyl halides
Reactivity of RX; CH3X > 1 ° > 2° > 3° Reactivity of RX; 3° > 2° > 1°> methyl
Mechanism is favoured when nucleophile is an
anion
Mechanism is favoured when nucleophile is neutral
Reaction velocity depends on the concentration
of nucleophile. i.e.. mechanism is favored by
high concentration of nucleophile
Reaction velocity is independent of the concentration
of nucleophile.
Inversion of configuration Racemisation
39. SNi reaction
Nucleophilic substitution reactions are proceeds with retension of configuration;
even there is no possibility of neighboring group participation.
In SNi reaction, the part of leaving group act as nucleophile.
40.
41.
42. Aromatic nucleophilic substitution reaction
The attack of nucleophile on the saturated benzene ring (nucleus) will be much more
difficult because -
The π-electron cloud (density) of the aromatic ring
is repelled an approaching nucleophile
It’s π-orbital system is less capable for the
delocalization of extra two electrons in negatively
charged intermediate so that stability of anion goes on
decreasing
Conclusion: electron withdrawing group favour the attack of nucleophile which
decrease electron density of ring and also shows stabilization negatively charge
intermediate in some extent.
43. Aromatic nucleophilic substitution reaction
Mechanism for nucleophilic substitution:
The SNAr mechanism
SN1 mechanism
Benzyne mechanism
SRN1 mechanism
46. Benzyne mechanism – cine substitution
Cl
H
NaNH2 NH3
NH2
NH2
+ + +
[Chlorobenzene] [Benzyne]
Strong bases - sodamide NaNH2 or certain metal alcoxides RONa (e.g. Me3COK)
Structure of benzyne:
Mechanism
Order of halide reactivity is Br > I > Cl >> F, when the reaction is performed with NaNH2
in liquid ammonia
48. Give the product of the reaction of methyl bromide with each of the following nucleophiles:
Which is a better nucleophile in methanol?
49. Arrange the following alkyl bromides in order of decreasing reactivity in an SN1 reaction:
isopropyl bromide
propyl bromide
tert-butyl bromide
methyl bromide.
Which of the following reactions will go faster if the concentration of the nucleophile is
increased?
50. Write the structure of the Grignard reagent formed from each of the following compounds on
reaction with magnesium in diethyl ether:
(a) p-Bromofluorobenzene (c) Iodocyclobutane
(b) Allyl chloride (d) 1-Bromocyclohexene
Using 1-bromobutane and any necessary organic or inorganic reagents, suggest efficient
syntheses of each of the following alcohols:
(a) 1-Pentanol (d) 3-Methyl-3-heptanol
(b) 2-Hexanol (e) 1-Butylcyclobutanol
(c) 1-Phenyl-1-pentanol
What products would be formed in these reactions?
51. Indicate how the following compounds could be prepared from the given starting materials:
Which of the following tertiary alcohols cannot be prepared from the reaction of an ester with
excess Grignard reagent?
