How to use auto code reader turn off check engine light alert: http://blog.autoobdtools.com/auto-code-reader/how-to-use-auto-code-reader-turn-off-check-engine-light-alert/

1. http://blog.autoobdtools.com/auto-code-reader/how-to-use-auto-code-reader-turn-off-check-engine-light-alert/
AutoOBDTools
Learning Center
AutoOBDTools offical blog is used to share auto obd diagnostic tools
knowledge
You are here: Home / Auto Code Reader / How to use auto code reader turn off check engine light alert
How to use auto code reader turn off Search
check engine light alert Search this site...
By OBDBLOG64Gpp2u5 on July 1, 2011 | Leave a response
When a check engine light alert appears,AutoOBDTools.com tell you how to use auto code
reader to fix it.
Categories
Auto Code Reader
auto key programmer
car repair term
OBDII PDF E-BOOK Download
Archives
July 2011 (34)
diagnostic link connector under the driver's- June 2011 (1)
side dash
1. Locate the code reader receptacle under the dash. This is the connection to your
car’s computer. It’s usually under the dash on the driver’s side under the steering
wheel.
Recent Comments
steersags on What is OBDII(On-
Board Diagnostic)
slimmingmethodsonline on What is
OBDII(On-Board Diagnostic)
buylegalsteroids on What is
OBDII(On-Board Diagnostic)
Blogroll
AutoOBDTools
auto code reader plug
2. Plug the end of the code reader’s cable into the receptacle. As soon as you plug it in,
it will turn on automatically and try to read the car’s status. The code reader’s display
will display the word, Read.

2. auto code reader plugged in
3. Turn the ignition on to accessory power. Don’t crank the engine. Accessory power is
the when you turn the key in the ignition to the notch where the radio is on and the
seatbelt chime starts ringing. You must turn on the power within 10 or 15 seconds of
connecting the code reader or the code reader will display ERROR and after a few
seconds, repeat the cycle of trying to read the car’s status again
4. After you turn the ignition switch to accessory power, the code reader will read
whatever code your car’s computer is sending. In the case of the picture at left, only
the numerical error code is displayed. The owner would then need to refer to the
instruction manual that came with the code reader in order to determine what the
code represented. For the purpose of this tutorial, we’re assuming that we already
know that the code represents something that isn’t critical and all we want to do is
turn off the check engine light.
5. Press the Erase button twice. Check engine light is off. Disconnect code reader and
turn off ignition. You just saved yourself at least $50 by doing it yourself!
POSTED IN Auto Code Reader
TAGGED Auto Code Reader, check engine light alert, turn off check engine light alert
BMW INP OBD2 INTERFACE
A U581 LIVE DATA OBD2 EOBD VOLVO VIDA DICE 2010D BMWAK90 Key Programmer
Scanner Can-Bus Code Diagnostic Tool for all BMW EWS
Reader
Price: 237.00$ Price: 100.00$ Price: 310.00$ Price: 499.00$ 449.00$
32MB CARD FOR GM TECH2 Free Shipping 711 BMW 20pin Cable for BMW S.1279 Module of PPS2000
Programmerr GT1 Lexia-3 Citroen Peugeot
Price: 169.99$ Price: 129.00$ Price: 66.99$ Price: 36.00$

3. Leave a Reply
Name * Email *
Website
Comment
POST COMMENT
← PREVIOUS NEXT →
Copyright © 2011 AutoOBDTools Learning Center. Powered by WordPress and Trending.