Dynamic source routing

DSR: The Dynamic Source Routing
Protocol for Multi-Hop Wireless Ad Hoc
Networks
Presenter
Ashraf Uddin
Sujit Singh
South Asian University
(Master of Computer Applications)
http://ashrafsau.blogspot.in/


Routing Overview

 Network with nodes, edges
 Goal: Devise scheme for
transferring message from one
msg
node to another
 Destination routing
 Source routing


Source (“path”) routing

 Source specifies entire route: places complete path to

destination in message header: A – D – F – G

 Intermediate nodes just forward to specified next hop:

D would look at path in header, forward to F

 Like airline travel – get complete set of tickets to final

destination before departing…


Destination (“hop-by-hop”) routing

 Source specifies only destination in message header: G

 Intermediate nodes look at destination in

header, consult internal tables to determine appropriate
next hop

 Like postal service – specify only the final destination on

an envelope, and intermediate post offices select where
to forward next…


Ad Hoc Routing
 Every node participates in routing: no distinction
between “routers” and “end nodes”

 No external network setup: “self-configuring”

 Especially useful when network topology is dynamic
(frequent network changes – links break, nodes come
and go)


Common application
 Mobile wireless hosts
 Only subset within range at

given time

 Want to communicate with

any other node


DSR Protocol Activities
 Route discovery

 Undertaken when source needs a route to a destination

 Route maintenance

 Used when link breaks, rendering specified path

unusable


Route Discovery
• The source sends a broadcast packet which contains
source address, destination address, request id and
path.
• If a host saw the packet before, discards it.
• Otherwise, the route looks up its route caches to
look for a route to destination, If not find, appends its
address into the packet, rebroadcast,
• If finds a route in its route cache, sends a route reply
packet, which is sent to the source by route cache or
the route discovery.


source broadcasts a packet containing address of source and
destination
source (1,4)
1
4

The destination sends a reply packet to source.
8
(1,3) destination
3
7
(1,4,7)
2
The node discards the packets having been seen
(1,2)
6
5
(1,3,5) (1,3,5,6)

The route looks up its route caches to look for a route to destination
If not find, appends its address into the packet

How to send a reply packet
 If the destination has a route to the source in its route
cache, use it

 Else if symmetric links are supported, use the reverse
of route record

 Else if symmetric links are not supported, the
destination initiates route discovery to source


Route Maintenance
 Whenever a node transmits a data packet, a route
reply, or a route error, it must verify that the next
hop correctly receives the packet.
 If not, the node must send a route error to the
node responsible for generating this route header
 Intermediate nodes “eavesdrop”, adjust cached routes
 Source deletes route; tries another if one cached, or
The source restart the route discovery


Route Maintenance……

A B C D E

Route error message: C-D
is broken


DSR Optimization: Route Caching
 Each node caches a new route it learns by any means
 When node S finds route [S,E,F,J,D] to node D, node S
also learns route [S,E,F] to node F
 When node K receives Route Request [S,C,G] destined
for node, node K learns route [K,G,C,S] to node S
 When node F forwards Route Reply RREP
[S,E,F,J,D], node F learns route [F,J,D] to node D
 When node E forwards Data [S,E,F,J,D] it learns route
[E,F,J,D] to node D
 A node may also learn a route when it overhears Data

Additional Route Discovery features

DSR route discovery does not allow nodes like F to
reply to RREQ



Node C may infer
 Preventing Route Reply that the initiator has
already received a h=2
storms
Route Reply giving
 Many Route Reply message C
a better route
could be send to A from the because the data
A’s neighbors packet received
 To avoid a possible local from B contains a
congestion, each nodes must value of “h” less
wait a variable period before than its h’s value
A B G
sending the reply.
 Delay period d = H(h - 1 + r) h=1
 Each node network interfaces
works into “promiscuous” E
receive mode.
h=3


 Route request Hop limits
 “Nonpropagating” Route Request(hop lim 0)
 To determine if the target is
2 Hop limit
neighbour or a neighbour has a route
1 Hop limit
to the target cached.
 “Propagating” Route Request( no hop lim) Non
Propagating
 If no route reply is recived after a Route
Request The expanding ring search
approach can carry to the
short timeout. average latency increasing

 “Expanding ring”
 Increase hop value stepwise if no
route reply is recieved.


Additional Route Maintenance features


Support for Heterogeneous networks & mobile IP

 Heteregenous network :
Different kind of devices with different interfaces.
Possibly , multiple interfaces( short range & long range)


DSR evaluation
 Simulation
 To analyse the behavior and performance of DSR.
 To Compare with other routing protocols
 Set Up:
 Ad hoc of 50 mobiles nodes
 15 minutes ( 900 seconds) simulation time.
 CBR data traffic
 20 mobile nodes traffic sources; 4 packets/sec.
 Random waypoint mobility model ( pause time)


Packet Delivery Ratio(with movement speed 1m/s)


Routing Overhead(with movement speed 1m/s)


Packet Delivery Ratio(with movement speed 20m/s)


Routing Overhead(with movement speed 20m/s)


RESULT
 At both movement speeds, DSR delivers almost all
data packets, regardless of pause time.
 100% delivery ratio at pause time 900 sec, a stationary
network.
 At 1 m/s delivery ratio> 99.5%
 At 20 m/s delivery ratio> 98%


Advantages
 Routes maintain only between nodes who need to
communicate. Reduces overhead of routing
maintenance.
 route caching reduces route discovery overhead.
 A single route may yield many routes to the
destination.


Disadvantages

 Packet header size grows with route length due to
source routing.
 Flood route request may potentially reach all nodes in
the network.
 Route reply storm problem.


Conclusion

 Excellent performance for routing in multi-hop ad hoc.
 Very low routing overhead.
 Able to deliver almost all originated data packets, even
with rapid motion of all nodes.


THANKS


Reference
[1]. David B. Johnson, David A. Maltz, and Josh
Broch, "DSR: The Dynamic Source Routing Protocol
for Multi-Hop Wireless Ad Hoc Networks", in Ad Hoc
Networking, edited by Charles
E. Perkins, Chapter 5, pp. 139-172, Addison-
Wesley, 2001. Invited paper.


??????
QUESTION

??????

Dynamic source routing

Recommended

Recommended

More Related Content

What's hot

What's hot (20)

Viewers also liked

Viewers also liked (6)

Similar to Dynamic source routing

Similar to Dynamic source routing (20)

More from Ashraf Uddin

More from Ashraf Uddin (7)

Recently uploaded

Recently uploaded (20)

Dynamic source routing