1. Scaffolding Clamps Manufacturer
Scaffolding is a temporary frame used to support people and material in the construction or repair of
buildings, power lines and other large structures. Now metal pipes replaced the age old usage of
bamboo for better safety norms. Coupler clamps are designed to fit around the ends of two different
pieces of pipe where they meet to hold the pieces together. You can use them with both vertical and
horizontal sections of pipes. The most common type sold simply tightens onto the pipes via a bolt.
Some coupler clamps utilize a grub screw (a screw that tightens against the pipe) to hold the pipes
in place. Standards are the vertical pipes to which other horizontal pieces will be attached. Many
standards can be stacked to create a taller structure, and they are connected with scaffolding
clamps.
Utmost care should be taken and proper quality checks are in place in designing and Scaffolding
clamps Company should offer high safety pipes and connecting clamps and bends for proper
scaffolding. Tube clamps are one of the most common type of clamps used in scaffolding. They are
designed for you to fit onto the tubes. You tighten a screw or bolt via a screwdriver, wrench or socket
to tighten the tube around the pipe or tube in question. Tube clamps generally are sold as part of a
scaffolding set that usually includes right-angle clamps to connect vertical and horizontal sections.
.Each clamp consists of two ‘U' elements, rigidly attached to a steel plate, passing through four holes
in the corner of another steel plate. The ‘U' elements are designed to accommodate two scaffolding
beams, square or round, above each other.
Scaffolding clamps manufacturer should be made of galvanized steel and meets international
specifications. Scaffolding pipes are sturdy and corrosion resistant. Our range of products include
Scaffolding Pipes, Scaffolding Clamps, Double Couplers, Swivel Couplers. Beam clamps are
designed to attach to the steel beams of a commercial building to hold scaffolding in place on large-
scale projects. They generally are not used for small-scale scaffolding, such as those painters,
carpenters and other residential workers use. They are used in pairs for projects such as high-rises.
The scaffolding beams can be parallel or at right angles to each other.

2. The Lobo system can be quickly constructed as secure, free-standing static or mobile platforms in a
variety of heights and sizes, without the use of any tools. The Lobo system packs away easily when
not in use Scaffolding clamps and can be hand carried anywhere.
Power line hardware
If an overhead power line is built near a coast, industrial area, desert, or at any other locales where
airborne contaminants may build up on insulators, the problem of contamination induced flashovers
must be considered. The overhead line equipment plays a vital part in the selection of route, both
pole mounted transformers and high voltage insulators are all determining factors. To ensure that
the installation of the overhead line is proper and secure overhead line clamps are essential. Before
any overhead power line can be implemented a thorough investigation and study must be carried out
to ensure that the most practical route is selected.
Power line hardware constitutes various clamps like Tension clamps, Guy clamps, cable
suspension clamps etc to attach Low Tension and High Tension power lines properly to the power
towers. There are two main types of high voltage insulators used on overhead power lines,
suspension insulators and post insulators to work with the power transformers. Typically porcelain
insulators are used for both a post insulator and a suspension insulator; there is also the option for
glass insulators. Contamination considerations must be examined prior to installation.
High quality material to with stand temperature and corrosion is used in the design and fabrication
of power line equipment. Every small element like a nut and bolt that comes as attachment goes
through rigorous quality checks to provide long life and sustainable usage. Line hardware is seen as
the most complex part of any design. Pole line hardware for overhead lines can be separated into
conductor related hardware and structure related hardware.
For the majority of overhead lines the conductor may form the most expensive single component of
investment but at the same time the most exposed, dangerous and easily damaged.

3. To ensure that the installation of the Power line hardware is proper and secure overhead line
clamps are essential. Maps are developed in order to identify the avoidance and exclusion areas
and other requirements before the project can begin. Once final route selection has been agreed the
utility poles have to be selected. The determining factor for wooden pole choice comes down to
weight.
Some of the hardware are Tension Clamps, Tension Clamps with hardware, Power line hardware,
Guy clamps, Cable suspension clamps, Bronze clamps, Anchor shade clamps. Line hardware is
seen as the most complex part of any design. Pole line hardware for overhead lines can be
separated into conductor related hardware and structure related hardware. For the majority of
overhead lines the conductor may form the most expensive single component of investment but at
the same time the most exposed, dangerous and easily damaged.
Over head transmission lines and Overhead line materials
In Transmission Line Design, there are many factors that go into choosing the best conductor for
your needs. For instance, power requirements, terrain, environmental conditions and constraints,
governmental constraints, thermal characteristics, and electrical characteristics all need to be
considere
Overhead transmission lines plays a crucial role in erection, laying and transmission of LT and HT
power lines in minimizing maintenance jobs and providing seamless flow of electric power. Over
Head transmission line planning, routing, and design and material supply within a stipulated time
schedule is important. In this respect, there is a major difference between the design of foundations
for transmission compared to the design of foundations for most normal civil engineering structures.
Over Head transmission line planning, routing, and design and material supply within a stipulated
time schedule is important. Increasingly, transmission lines are routed through areas of poor ground
conditions, often for reasons of amenity. This results in the need for the use of special, generally
larger, foundations.

4. High quality polymers are used in designing and production of Overhead line materials spares to
withstand extreme weather and temperature. With the progressive increase in transmission system
voltages there has been a related increase in foundation sizes and it is worth noting that with a
typical quad conductor 500 kV line, single leg uplift and ultimate compression loads of 70 or 80
tonnes are usual for suspension towers. High quality polymers are used in designing and production
of over head transmission spares to withstand extreme weather and temperature.
All these products should be designed and manufactured under strict quality control measures and
should have international standards. Some of the range of these products includes Disc Insulators,
Low Tension Pin Insulators, Pin Insulators, Vibration dampeners, Repair sleeves, Fiber spacers.
Electrical power transmission, which can be defined as transport of generator-produced electric
energy to loads- is conducted through different types of electrical cables. Electricity generating
stations and load consumption centers are connected to each other by a network of power
transmission lines, mostly overhead cable lines.
There is one more reason for not giving preference to underground cables as transmission lines- the
additional time it needs for repairs. It takes more time to locate, diagnose the problem and repair an
underground or Over head transmission line. While an overhead cable can be repaired in hours or
days, it may take weeks or even months to repair an underground cable.
Electricity generating stations and load consumption centers are connected to each other by a
network of power transmission lines, mostly overhead cable lines.
Power transmission equipment and Transmission line manufacturers
There are two kinds of electrical transmission lines, transmission lines that conduct power from
generating source substations, and distribution lines that send power ton to individual consumers.
Several Electrical Components are required for maintaining quality power transmission. These

5. hardwares transmit the whole electrical and dynamic forces incoming from the conductors and
grounding wires.
The Power transmission equipment are designed, manufactured and packed with the latest
technology by the experienced engineers according to the international standards. The company
should perform all electrical and mechanical tests including heat cycle and damper tests in according
to the latest versions of IEC Standards. As the need for transmission of communication signals
increase, many Optical Ground Wires(OPWG) are replacing traditional ground wires.
These components have high quality structural member and composition comprising of a solid
disposed on the structural member. The solid is made of first cross linkable polymer resin, a second
polymer resin, a cross linking catalyst and a colorant which provides the solid a high heat resistant
capability. The deployed sensors will collect data continuously, develop histograms, and determine
maximum values. Data will be transmitted to Ti when it is in close proximity and will then be
transmitted to maintenance personnel.
Transmission line material inspection robots, when coupled with these sensors, will be able to
provide comprehensive, accurate, and useful information to optimize line maintenance and improve
transmission reliability. In some cases, the purchase of robots for use in place of maintenance crews
could shift O&M expenses to capital costs, allowing a return on investment and depreciation. In
recent years, AAAC conductor has been a popular choice for transmission lines due to its high
electrical carrying capacity and high mechanical tension to mass ratio.

6. These products can withstand a temperature up to 250 degree centigrade. The product range
includes Double Break AB Switches, Single Break AB Switches, 11 KV Dolo Cutouts, Double Break
Tilting Type AB Switches, Dolo Cutouts CH Type. In the field, the transmission line robot will be
permanently installed on a transmission line shield wire. It traverses structures and obstacles, e.g.
marker balls, utilizing bypass systems that are permanently installed on the transmission line.
The robot automatically disconnects itself from the shield wire and connects itself to the bypass
system. Once it is has bypassed the obstacle or structure it then returns to the shield wire. These
bypass systems could be installed during construction or be made integral to the Transmission line
manufacturers. It is envisioned that the robot's mobility could be developed to remove the need for
by-pass systems, enabling its deployment on existing transmission lines. Wind-induced vibration or
Aeolian vibration of transmission line conductors is a common phenomenon undersmooth
wind conditions.
Electrical power lines and Electrical transmission lines in India
Overhead and underground electrical power transmission and distribution systems are constructed,
maintain and repaired by Electrical Power Lines and cable workers. When working aloft on poles
and towers climb ladders or operate hydraulic buckets, or to install cables, power lines and
associated equipment work in confined spaces such as trenches and tunnels. Electrical technology
courses from high school, college or industry is usually required for electrical power lines and cable
workers.
Electrical Transmission Lines should be designed to hold up in adverse weather conditions, the
transmission lines primarily use ACSR conductors. For transmission line surveys, Lasermap should
provide accuracy of Lidar data in the region of 6 inches absolute and closer relative. This means
Lidar point to Lidar point data is usually within 2-3 inches in accuracy, providing a very close
accuracy rating between points along the line. However, compared to local geodetic benchmarks
(ground control) the absolute accuracy of any point is around six inches. Maintain and expand power
generation and transmission infrastructure on the basis of reasonable projections of increased
demand and need to maintain the nation's energy security.

7. Our team of professionals meticulously fabricates the Power Line Hardware range and to make the
range free from all drawbacks will be quality tested. A full line of pole-line hardware for use in the
distribution, transmission, substation, OEM, and telecommunications market is being provided by us.
We provide much more that high quality insulatorsand hardware
Aluminum cables wrapped around steel-reinforced cores where in aluminum conducts the
electricity and the steel adds strength to prevent the line from sagging. When the Electrical
transmission in india gets close to where it will be used it goes into a substation. The substation
contains electrical equipment such as transformers. The transformers lower the voltage of the
electricity to the level needed depending on its use. Factories, mass transit systems, streetlights,
businesses and homes all need the electricity to be at a different voltage depending on how the
electricity is used. Continue research in areas related to improving and enhancing the nation's
transmission and generation infrastructure.
Another great advantage of ACSR conductors is their high tensile strength and light weight. The
electricity leaves the substation to go to electricity users on smaller wires than the transmission lines.
These wires are called distribution lines. In some communities, the distribution lines are overhead
and you can see them. Newer neighborhoods have the distribution lines underground so you may
not even know they are there.
There are two main kinds of electrical lines: transmission lines that conduct power from a generating
source to substations, and distribution lines that send power on to individual homes and
businesses. Electrical power lines are one part of a three-part system that makes up our power
"grid." First, there are the towers, which are made of wood or steel; then the insulating structures,
which are ceramic or porcelain; then the lines themselves.
The Power Line Hardware is widely used in electric power, distribution line and telecom
industries. We also supply world class Power Line Hardware items you need, we spend to ensure
only the finest quality along with the time and effort, makes us your complete source for insulators,
pole line hardware etc.

8. Earthing material manufacturer
To provide an substitute path for the fault current to flow is the main objective of Earthing, so that it
does not endanger the user of damage the equipment. A complete range of world class electrical
earthing materials which is playing a vital role in all electrical systems offered by us is widely used in
earthing systems. These materials are broadly used in various industries like Electrical, Electronics,
Automobile and Engineering etc. We the Earthing Material Manufacturersupply the Earthing Material
in various standard specifications, and these can be also custom made as required by the clients.
Our range of products include Crimping Legs and sockets, Hot dip Galvanizing Cross arms, Pipe
Electrodes, Earthing Pipes, Earthing Plates, Earthing Strips, Earthing Wire, Tension Clamps and
Manhole Covers etc. We the Earthing Material Manufacturer also can help the client in installation
of all types of earthing like Maintenance Free Earthing, Plate Earthing, Strip Earthing and Pipe
Earthing etc, other than supplying high quality earthing material.
Less space is required to easily install Earthing electrode compared to conventional earthing and
has longer life. The longer period of effective earthing which helps Conductive and Earthing
electrode is hygroscopic, which is surrounded by Earthing powder. Absorbing and retaining
moisture content quality for a very long period can be done by The Earthing powder.
To provide an substitute path for the fault current to flow is the main objective of Earthing, so that it
does not endanger the user of damage the equipment. A complete range of world class electrical
earthing materials which is playing a vital role in all electrical systems offered by us is widely used in
earthing systems. Earthing material manufacturers are broadly used in various industries like
Electrical, Electronics, Automobile and Engineering etc. We the Earthing Material
Manufacturer supply the Earthing Material in various standard specifications, and these can be also
custom made as required by the clients.

9. Our range of products include Crimping Legs and sockets, Hot dip Galvanizing Cross arms, Pipe
Electrodes, Earthing Pipes, Earthing Plates, Earthing Strips, Earthing Wire, Tension Clamps and
Manhole Covers etc. We the Earthing Material Manufacturer also can help the client in installation of
all types of earthing like Maintenance Free Earthing, Plate Earthing, Strip Earthing and Pipe Earthing
etc, other than supplying high quality earthing material.
Less space is required to easily install Earthing material compared to conventional earthing and
has longer life. The longer period of effective earthing which helps Conductive and Earthing
electrode is hygroscopic, which is surrounded by Earthing powder. Absorbing and retaining
moisture content quality for a very long period can be done by The Earthing powder.