1. Communications Systems | LBC 3432/02 Unidirectional Sound Projector
LBC 3432/02 Unidirectional Sound
Projector
www.boschsecurity.com
u Excellent speech and music reproduction
u Provision for supervision board mounting
u (Suspended) ceiling and/or wall mounting
u Water and dust protected to IP 66
u EN 54‑24 certified
The LBC 3432/02 is a powerful 20 W sound projector to inform people of the situation. The loudspeaker has
intended for speech and music reproduction in indoor a ceramic terminal block, thermal fuse and heat
and outdoor applications. The sturdy, aluminum resistant, high-temperature wiring.
enclosure is finished in the color off-white. It has The sound projector is constructed from extruded
provisions for cable loop through connection and aluminum and finished in off- white. The front-grill and
mounting of a line or loudspeaker supervision board. bracket are made from aluminum to increase corrosion
The sound projector is suitable for use in voice alarm resistance.
systems.
Certifications and Approvals
Functions
Quality assurance
Voice alarm loudspeakers are specifically designed for All Bosch loudspeakers are designed to withstand
use in buildings where performance of systems for operating at their rated power for 100 hours in
verbal communication announcements is governed by accordance with IEC 268‑5 Power Handling Capacity
regulations. The LBC 3432/02 is designed for use in (PHC) standards. Bosch has also developed the
voice alarm systems and is compliant with British Simulated Acoustical Feedback Exposure (SAFE) test
Standard BS 5839‑8 and EN 60849. to demonstrate that they can withstand two times
The sound projector has provision inside for mounting their rated power for short durations. This ensures
an optional line/loudspeaker supervision board. improved reliability under extreme conditions, leading
The loudspeaker has built-in protection to secure that, to higher customer satisfaction, longer operating life,
in the event of a fire; damage to the loudspeaker does and lessons the chance of failure or performance
not result in failure of the circuit to which it is deterioration.
connected. In this way, system integrity is maintained;
ensuring loudspeakers in other areas can still be used
2. 2 | LBC 3432/02 Unidirectional Sound Projector
Safety acc. to EN 60065 10dB
Emergency acc. to BS 5839‑8 / EN 54‑24 /
EN 60849 90
Water and dust protection acc. to IEC 60529, IP 66
SPL(dB)
Region Certification
31.5 63 125 250 500 1k 2k 4k 8k 16k
Europe CE Frequency (Hz)
Poland CNBOP Frequency response
CNBOP 0˚ 0˚
0
30˚ 30˚
Installation/Configuration Notes
-10
60˚ 60˚
Mounting
A sturdy aluminum mounting bracket is supplied to -20
allow easy mounting and directing in virtually any 90˚ 90˚
position. The sound projector may also be suspended
using the bracket. -20
120˚ 120˚
Power Setting -10
A one meter long fire-resistant six‑core cable is
150˚
standard fitted to the loudspeaker. Each core is a 150˚
180˚
0
180˚
different color, and is connected to one of the primary
250 Hz 2000 Hz
taps on the transformer. For loop-through connection, 500 Hz 4000 Hz
the rear cover is fitted with a second entry hole 1000 Hz 8000 Hz
(covered as standard supplied). Polar diagram
200
7.87
Octave band sensitivity *
Octave SPL Total octave Total octave
1W/1m SPL SPL
5.75
146
1W/1m Pmax/1m
125 Hz 81.2 - -
5.20
250 Hz 87.0 - -
132
7 500 Hz 86.2 - -
0.28
1000 Hz 92.2 - -
30.5 30.5
1.20 1.20
mm 2000 Hz 94.5
154 in 4000 Hz 100.4 - -
6.06
Dimensions: mm / in 8000 Hz 93.3 - -
A-weighted - 93.2 104.9
0
20W Lin-weighted - 93.1 104.2
10W
5W
8
Octave band opening angles
2.5W Horizontal Vertical
125 Hz 360 360
Circuit diagram
250 Hz 360 360
500 Hz 360 360
1000 Hz 179 179
2000 Hz 105 105