Diese Präsentation wurde erfolgreich gemeldet.
Wir verwenden Ihre LinkedIn Profilangaben und Informationen zu Ihren Aktivitäten, um Anzeigen zu personalisieren und Ihnen relevantere Inhalte anzuzeigen. Sie können Ihre Anzeigeneinstellungen jederzeit ändern.

AutoCAD Architecture

4.330 Aufrufe

Veröffentlicht am

AutoCAD is a computer-aided drawing application used for creating blue-prints for buildings, Create a bridges and computer chips. CAD is mainly used by draftsman, although engineer, surveyors and architecture, may need to use the software application.

Veröffentlicht in: Bildung
  • HOW TO UNLOCK HER LEGS! (SNEAK PEAK), learn more... ♣♣♣ http://scamcb.com/unlockher/pdf
       Antworten 
    Sind Sie sicher, dass Sie …  Ja  Nein
    Ihre Nachricht erscheint hier
  • FREE TRAINING: "How to Earn a 6-Figure Side-Income Online" ... ♣♣♣ http://ishbv.com/j1r2c/pdf
       Antworten 
    Sind Sie sicher, dass Sie …  Ja  Nein
    Ihre Nachricht erscheint hier
  • Want to earn $4000/m? Of course you do. Learn how when you join today! ●●● http://scamcb.com/ezpayjobs/pdf
       Antworten 
    Sind Sie sicher, dass Sie …  Ja  Nein
    Ihre Nachricht erscheint hier

AutoCAD Architecture

  1. 1. AutoCAD Architecture ADMEC Multimedia Institute C-7/114, 2nd Floor, Sector-7, Rohini, Delhi:110085 Mob.: +91-8377861642, 9999492155 Email ID: info@admecindia.co.in | website: www.admecindia.co.in Created by: Mukesh GuptaPresented By: ADMEC Multimedia Institute
  2. 2. What is AutoCAD ? ● AutoCAD (Automatic computer aided design) is a mercantile application for 2D plan and 3D modeling drawing available since 1982, as a desktop application and since 2010 available as a mobile web and cloud based apps. ● AutoCAD Developed by Auto-desk, CAD was first released in since December 1982, running on computers with internal graphics Comptroller. Former to the introduction of AutoCAD, most instdurial CAD programs ran on main computers or minicomputer, with each CAD manipulator working at a isolated graphic terminals. ● AutoCAD is a computer-aided drawing application used for creating blue-prints for buildings, Create a bridges and computer chips. CAD is mainly used by draftsman, although engineer, surveyors and architecture, may need to use the software application.
  3. 3. Types of Drafters? Three types of drafters: Mechanical drafter: Mechanical engineers ,which create a plan of our project,and he is prepare a plan of his device.
  4. 4. Architectural Drafters: Architectural drafters draw a plan of our residence and industrial building. Civil engineer draw a plans for make bridge and road design and building of sewer method and other major projects.
  5. 5. Electrical Drafters: Electrical engineer work up electricity to prepare drawing of wiring electrical device demonstration.Electrical engineer also create a wiring plan for making, installing and repairing of electronic gadgets. Electrical engineer deep study and application for electricity.
  6. 6. Who is AutoCAD Designer? CAD designer are professional who make a 2D plan and 3D modeling. Another designers as civil, machanical, architecture he make a building design.Sourly, CAD designers work an engineer, architect and interior designers to design a home design, electric or room designs. Most important, they help to create plans that can be used by an- other architecture professional.
  7. 7. Where is AutoCAD Used? Auto-CAD is used athwart a broad range of industries, by as architectures, project managers, civil engineers, graphic designers, and other professionals and electrical engineer which make a good plan for our projects. ● Auto-CAD is engineer prepare a good plan and use it. ● Cad desingner prepare a building,bridge and roadways , flyover and another things .
  8. 8. CO-ORDINATE SYSTEM ● Every thing that be draw in autocad is exact All object drawn on screen is based on simple ● (x-y) co-ordinate system ● It is know as WCS(world co- ordinate system) in auto-CAD. ● Now we are draw a line,so we have take two points as:- A(- 10,-4) and B(9,6).
  9. 9. Comparison between 2D and 3D? 2D is a single view.but 3D is a six view and four isometric view. it is explain under of page. 2D is two dimensions "level", use the horizontal and vertical (X and Y) dimensions, but 3d is the three dimensions (X and Y and Z), ● It is show in 3d six view . Top view and Bottom view, Left view and Right view, Front view and Back view ● And 4 Isometric view:- South-East AND North-East AND North-West , South- West
  10. 10. About Autocad Commands? ● Basics: Units. ● Viewing: Draw order, draw order annotation. ● Geometry: Circle,hatch,line,pline,rectangle. ● Precision: Distance,osnap. ● Layer: Layer. ● Properties: Match properties,line type.
  11. 11. ● Modifying: Trim, Stretch, Rotate, Pedit, Offset, Move, Mirror, Fillet, Extend, Explode, Erase, Copy, Align, Champher. ● Block: Insert, Block. ● Layouts: Mview. ● Notes and labels: Style, Mtext, Multileader Style, Multileader. ● Dimensions: Dimaligned, Dimangular, Dimcontinue, Dimdiameter, Dimradius, Dimstyle.
  12. 12. Be a AutoCad Architecture - Contact Us - ADMEC MULTIMEDIA INSTITUTE Leader in Animation & Digital Media Education ISO 9001 : 2008 CERTIFIED - Visit Our Websites - www.admecindia.co.in www.cadtraininginstitute.com Phones: +91-9811-8181-22, +91-9911-7823-50
  13. 13. AutoCAD Screen
  14. 14. Out Line... The presentation gives you a brief on the following topics and how to use them on auto-cad software. ● Way to provide command ● Drawing 3d shapes ● Object snap ● UCS(User coordinate system ● Editing ● Zooming and panning ● Drawing 2d shapes ● Assignment
  15. 15. How do We Issue a Command? ● Command Line ● Toolbars ● Drop down menus ● Ribbon
  16. 16. What is Osnap ? Osnap (object osnap) setting make it easier to select a 2D objects points:- ● End point ● Midpoint ● Perpendicular ● Centre ● scission ● Osnap will be active when autocad is expect you to pick a point on the operative area (F3) is on. ● Type (osnap) on your command window OR press F3 key.
  17. 17. Zooming ? ● You want to zoom in side and out side you type z in autoCad window. ● This doesn’t change your ucs, only the route you see your ● Work space. This can be done in many way. ● Scroll bars ● Type ''Z'' or Zoom in your command prompt:- All Centre Dynamic Extents Previous Scale Window
  18. 18. Let's Draw A Line ? Give the Command ● Short command (L+Enter) to open line ● Type ''L'' on the command prompt: ● Click on the line icon on the draw panel in the toolbar ● Select line on the Ribbon
  19. 19. Specify the first point : ● Click on a random point on your working area (block space) Specify the second point in relation to the first point: ● @ Distance – degrees ● @ 5<30
  20. 20. CIRCLE COMMAND Type “C” in the command prompt then press Enter Circle is depend on two access: ● Centre (Diameter) ● Radius
  21. 21. ELLIPSE COMMAND Ellipse is also depend on two access ●Major ●Miner Type “EL” in command prompt then press Enter.
  22. 22. POINT COMMAND Point is also depend on two access:- ● Divide ● Measure
  23. 23. What is Polygon ? Specify the number of edge and length of a side:- ● First enter the number of sides number and second specify centre of polygon. Polygon is depend on two access: Inscribed (polygon is Inscribed in circle) Circumscribed (polygon is out of circle) ● You can use the explode command for the tool to split the object into its components or lines.
  24. 24. What is Editing ? Copy command: A copy object made to similar to an object.
  25. 25. Move Command: Move command that moves one or more files or directories from one place to another.
  26. 26. What is Else ? RECTANGLE Type “Rec” in the command prompt then Enter Rectangle two diagonal lines (pick first point and select the second one with relation to the first point).
  27. 27. Mirror Command: A mirrored copy of an object is called mirror.
  28. 28. Array Command: Array command create a circular pattern of object.
  29. 29. Stretch Command: The Stretch command is used to adjust the rectangle(width and length).
  30. 30. More Editing... Offset command: The Offset command creates parallel copies of an object (default value) away from the original object.
  31. 31. Rotate Command: The Rotate command is used to rotate an object of angle.
  32. 32. Explode Command: The Explode command allows the compound object to change into the poly line object.
  33. 33. Erase Command: Erase command (delete command) that command used to selected object erase.
  34. 34. What is Polyline ? ● The Pline command create a chain line with multiple vertexes and straight or circular. ● Segments between the vertexes. ● Draw a close shape with the pline command. ● Then type Pedit (Polyline edit) on the command line and see what you can do with its.
  35. 35. What is Hatching ? ● Hatch command is used to add shaded patterns to objects and shapes in autoCAD drawing. ● Hatch patterns can be used to signal a articles to be used. such as a solid hatch. ● In the alternative it could be used to make an area of a draw stand out. You pick the object:- ● Pattern ● Scale ● Angle ● Points
  36. 36. 3D Commands ? Now we can prepare a solid objects by extrud command as:- If you “extrude” a surface to get into the third dimension you just add a thickness in block. It is basically is same as creating a “solid” objects.
  37. 37. Vscurent: It is used for setting of view style of diagram, which may be..... ● 2D Wire frame ● Realistic ● 3D Hidden
  38. 38. SWEEP COMMAND ● Creates a solid or surface by sweeping on open or closed planar OR ● Creates a 3d solid or surface by revolve an object around an axis non-planar curve(profile) along on open or closed path. Open curves create surfaces and closed curves create solid or surfaces.
  39. 39. 3D MODELING... ● Solids contain the “property” of 3d object. You can use the solids toolbar for readily accessible objects:- ● Box ● Wedge ● Con ● Cylinder ● Torus ● Sphere
  40. 40. You can use the boolean orations of more complicated shapes: ● Union (Join two Solids). ● Subtract (Carve out the second solids from the first). ● Intersection (Only the common area).
  41. 41. What is Difference between UCS and WCS ● The Auto-cad world is three dimensional. However, if we want to draw a 2D object. Such as a plan or a selection, we will use only 2dimension (x and y) . ● WCS (World Coordinate System) is the dreamy plan that is proportionate to the ground. It is the default coordinate system. ● Modification made to the WCS (world coordinate system) result in a UCS (user coordinate system). It enables the user to draw 3 dimensional objects.
  42. 42. - Contact Us - ADMEC MULTIMEDIA INSTITUTE Leader in Animation & Digital Media Education ISO 9001 : 2008 CERTIFIED - Visit Our Websites - www.admecindia.co.in www.cadtraininginstitute.com Phones: +91-9811-8181-22, +91-9911-7823-50

×