6. Work on rear projected and multiple projection systems
7. Works in conjunction with most screen sharing software’sIf you find one, please let us know!!!
8. To retrieve the software go to www.pidfx.com Scroll to the bottom of the page where you will find “File Manager”, click then enter username: pid password: touch *all lowercase
9. Enter: Username: pid Password: touch *all lowercase Click: Login In this order: Place a check mark in “U-Pointer Setup.zip” then hit “download” then, Place a check mark in “I-Pro 4 Setup.zip” then hit “download”
10. Upon completion of the software downloads, (3) icons will appear on your desktop, “U-Pointer(driver); i-Pro (annotation) and i-Pro Player (voice, video & annotation capture)”. Plug the USB powered U-Pointer into your computer. The computer will search, find and approve the device.
11. Double Click the U-Pointer Icon to activate the U-Pointer Driver thus allowing the process to begin.
13. Right click on the icon located in the lower right of your task bar. This will expand the menu of useful options. Click “Start Wizard”. Note: Windows7 users will need to expand the hidden menu bar to access the U-Pointer icon.
17. Point the sensor towards the projected workspace. You want to be sure that, at minimum, the camera can see the desired work surface. Note 1: if there is a glare on the surface, offset the U-Pointer to either side of the projector. The worst position to have the sensor mounted is directly on top of a “non-ceiling mounted” projector. Note 2: always check the strength of the U-Pointer pen tip by gently pressing down. You should see a faint red light. Click “OK”
19. Using your U-Pointer pen, click (3) points on the left, (3) points down the middle and (3) points down the right side. Note: be sure not to interfere with the line of sight from the pen tip to the U-Pointer.
20. Double Click the Finish button with your pen on the workspace, you are done…now let’s have fun
21. There are (2) ways to activate i-Pro, your annotation software: Double click the icon on your desktop or… Hold the pen down on the U-Pointer icon for a couple of seconds, a menu will appear, click “Run i-Pro”. Note: going forward, this is how you will “right click” with the pen.
23. To access the menu simply hold the pen down for a couple of seconds thus right clicking in the center of the wheel. This will access a number of standard options to include an option to amend the tool bars look and location.
24. The software defaults with the ability to begin annotating. Notice the adjusted placement and format of the tool bar? Also, note that we are working on the first slide being “1/1”
25. Simply click on the side bar to activate the menu options. The first 8 icons are very self explanatory
26. Importing Image Icon This icon allows you to either set an image as a slide “background” or set an image as an “object”. This selection is ideal if you are needing tracing paper functionality.
27. Select the data of choice Click Yes to set as the slide background Click No to set as an object
28. Select No? Now y ou have the ability to trace an object then remove the base object thus leaving your annotations.
29. Intelligent Mode Allows user to have both mouse & annotation functionality at the same time Window Mode This icon allows the user to switch back and forth from desktop to annotation mode
30. Intelligent Mouse Mode: You will notice that you can access functions in mouse mode and quickly adjust to annotation mode.
36. Image: Quad PDP’s with (1) U-Pointer…fully interactive Taken: Infocomm 2011 Arrows allow users to efficiently move thru their notes. Note: 2/3 in the upper right hand corner of your screen
37. Note Expansion allows users to continually move the slide indefinitely. If you run out of space during work simply slide the data out of your way.
38. Note List: In the note list window you can open wanted notes by double clicking, delete note selectively or rearrange your notes.
39. Magnify selected note region or enlarging entire note area from 100% to 400%. Size and position of all objects in the note varies according to magnifying ratio.
40. Fully integrated Video, Voice and Annotation capture given the computer has a camera and microphone. Select Audio Recording for Voice & Annotation Capture (.ist format). Select Video recording for Audio, Video & Voice Recording (.ist format). Select Screen Recording for Voice and Annotation recording (.wmv format). .ist file formats compressed 25-33% vs. .wmv formats.
41. Video Capture Window Control Icons Note Management Area Annotation Recording Window
45. Configuration Option allows for custom configuration to include the ability to add your Company logo, images, etc
46. This is an important feature ultimately allowing users to zoom in and out, pan left and right while allowing the markups to stick to scale. You simply need to bring up your document and proceed as if you were going to print the document. Select “i-Pro Virtual Printer” and this will import the into i-Pro annotation software (see next page).
47. You have the opportunity to rotate your document 90 degrees. Select “Import”.
48. To shut down I-Pro Annotation Software select “Quit i-Pro”
49. To shut down “U-Pointer right click with your mouse or pen, the menu will appear, select Exit
50. 55” Plasma To retrieve the latest Software, Photographs, Contact Information or Manuals go to www.pidfx.com
![Thank you for your involvement with FullCon Solutions and The U-Pointer. You are no longer restricted to the limitations of alternative products. The U-Pointer is a precise, purpose-built, next generation interactive tool. David Fuller | President |www.fullconinc.com Does any other product achieve all of the following? ,[object Object]](data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7)