If you want to enhance the performance of the engine, then you have to use the high-quality and right amount of engine oil. Thus, the oil is lubricating all the internal components of the engine for its smooth functioning. Sometimes, you will find that the engine of your Audi is consuming excess oil than required. Go through the following slide to know about the reason behind your Audi using excess oil than required.

1. Here's the Reason
Behind Your
Audi's Excessive
Oil Usage in
Phoenix

2. For improving the
performance of the
engine, your Audi needs
high-quality engine oil.

3. · Releasing the heat
generated during the
combustion process
· Lubricating all the
engine components
· Enhancing the engine
sealing
· Filtering out all the
impurities from the
engine
Moreover, the oil in the engine
are performing different
functions in your car:

4. On the other hand, the oil
is enhancing the
performance of the engine
and its lifespan.

5. Due to worn parts in the
engine, your Audi is using
excessive oil in the
combustion chamber.

6. The following points define the causes behind
excessive oil usage of Audi.

7. Worn-out piston rings
or cylinder walls

8. To maintain the
compression in the engine
and prevent the generated
combustion gases from
escaping, Audi has a set of
piston rings.

9. If the piston rings are
worn out, then the
cylinder walls function
abnormally and the
engine burns excessive
oil in your car.

10. Old engines

11. Due to regular use, the components of the engine are
deteriorated and cause leaks.

12. Therefore, the old engine is
consuming oil very faster
than required.

13. Damaged PCV
valve

14. Positive crankcase
ventilation is used for
eliminating the
harmful gases
generated during the
combustion process.

15. If the PCV valve of the
car is damaged, it will
block the oil flow into the
engine and make the oil
get sucked into the
engine.

16. Low or improper-
quality oil

17. Internal combustion
engines will require good
quality oil for a smooth
combustion process.

18. If you are using low or
improper-quality of oil in
the engine, it will damage
its internal part and cause
higher oil consumption.

19. Failed valve seal

20. Generally, the valve
stem seals are regulating
the oil consumption of
the car and make them
run smoothly on the
road.

21. When they are worn
out or failed, you will
notice oil leaks into the
engine cylinders and
combustion chamber.

22. C O N C L U S I O N

23. When the engine of your
Audi is using oil
excessively, first you
have to perform the oil
and oil filter change.

24. In this way, the performance of the engine is
increased and enhances fuel mileage in a long run.

25. https://www.tanner-motors.com/
https://www.facebook.com/tannermotorsphoenix
THANK YOU