1. 6 Steps Regarding Water Heater Installation
Installing a hot water heater is quite an easy task. You can also perform this task all on your own, if
you are comfortable with the DIY procedure. Here are several steps for hot water heater installation in
Cambridge, MA.
Water heater Installation in Cambridge, MA: Easy Steps
1. Switch off the h2o Connection
You should turn off the water connection before you begin with the installation process. This can be
done by closing of the valve about the water line, leading to the water heater. Ensure that you switch
off the gasoline line as well simply by turning off the penis. The knob needs to be perpendicular to the
line. Plug off the aged heater if it is power.
2. Connect the Hose
The next step will be connecting a hose pipe to the drain valve, situated near the bottom level of the
heater. Put the hose near another location. Allow the normal water to drain out by opening the
depletion valve.
3. Unscrew the Water Inlet
You might have to unscrew the river inlet and the normal water outflow fitting. This really is situated at
the top of your heater. You will have to use a pipe wrench just for this task. Similarly, unscrew the
fitting to the gas line also.
4. Discard the existing Heater
Remove the old heater and dispose it as per the rules as well as regulations in your area. Set up the
new heater as opposed to the old one and level it properly. Ensure that all the settings and
accessible.
5. Screw the water store and inlet collection
Screw on the store as well as the inlet range. Use the wrenches in this task. Open the river line and
add the tank absolutely.
6. Connect your Gas Line
Connect the gas series to the tank while using the wrenches. If you are using a heater, then switch on
the mains. You can even seek the services of an expert if you are a novice as of this task.
tankless water heater reviews