1. Resume
Document Number 1
SHABEER.B.M
SENIOR INSTRUMENTATION DESIGN ENGINEER
I am having solid experience of 11+ years in Oil & Gas Industry as
Instrumentation Design Engineer
I have a Bachelor Degree in Applied Electronics and Instrumentation
Engineering with First Class from MES College of Engineering,
Kuttippuram, affiliated to University of Calicut, Kerala, India (2002-
2006.)
Areas of Expertise
My experience includes in short,
 Preparation of Material Requisitions, Technical bid evaluation
and NMR review of different instruments from different Vendors.
 Preparation of Instrument Index, Input/Output list.
 Preparation of cable schedule & Interconnection Diagram.
 Generation of Instrument loop diagram
 Preparation of Logic Diagram, Cause & Effect matrix etc.
 Preparation of Instrument specification sheet or Data sheet.
 Preparation of cable routing & instrument location diagram.
 Selection & sizing of various instruments.
 Preparation & Quality checking of Instrumentation Design
Packages.
 Preparation of Process Hook-Ups and Pneumatic Hook-Ups.
 Preparation of Instrument mounting typical and Material
Take-off list (MTO).
 Material Forecasting.
 Coordination with the construction/third party agency to make
the as built in the project site.
 Preparing the Vendor Lists and Techno-Commercial
Discussion with Vendors for the Selection of Instrument.
I am also familiar with different softwares like InstrucalVer 8.0, AutoCAD
etc.
Relevant Project Experience
Company: SAUDI ARABIAN KENTZ COMPANY LTD, Member of SNC-
LAVALIN, SAUDI ARABIA
Start/End Dates: May 2016 - Present
Responsibilities: Working as Senior Instrumentation Design Engineer.
 Education/Qualifications
B.Tech in Applied Electronics and
Instrumentaion from Universityof
Calicut(2002-2006),India
 Languages
English,Malayalam,Hindi,Arabic
 Experience
Length of Service- 11+ years
 Contact Details
Currentlocation – Al Khobar,
Saudi Arabia
PermanentAddress-
Darul Hidaya (Chavadiyil House),
Sanathanam Ward,Alappuzha.
Kerala,India. PIN:688001
Mob- 00966540061821 (Saudi
Arabia)
00919446079957 (India)
E-mail:
shabeer.basheer004@gmail.com
 Nationality- Indian
 Year of Birth – 1983
 Marital Status- Married
 Driving License- Saudi Arabia /
India

2. Resume
Document Number 2
SHABEER.B.M
SENIOR INSTRUMENTATION DESIGN
ENGINEER
 Preparation of material requisitions for different instruments
related to the project.
 Technical bid evaluation of different instruments from
different Vendors in line with Client standards.
 NMR (Non Material Requirement) review of different
instruments
 Preparation of Instrument Design Packages.
 Preparation of Instrument mounting typical and Material
Take-off list (MTO).
 Material Forecasting.
 Coordination of Instrument activities between the team.
Project Title:Expand Asphalt Production Facilities at Ras Tanura
Refinery.
Construct and operate new asphalt production facility capable of
producing 20000 BPD of paving Asphalt grade at its existing RasTanura
Refinery by installing new asphalt oxidizer and associated facilities
utilizing Biturox technology.
Instrumentation Scope include Radar Tank Gauging, field instruments like
pressure Transmitters, pressure gauges, temperature transmitters,
temperature gauges, Radar level instruments, Vortex Flowmeters,
Coriolis Flowmeters, DP type Flow transmitters, Level transmitters,
Differential Pressure Transmitters, Control Valves, ON/OFF valves,
Shutdown Valves, Pressure Relief Valves, Pressure regulators, Control
systems like DCS, ESD & TMS (Terminal Management Systems) in new
control building.
Client:Ras Tanura Refinery, Saudi Aramco.
Company:JACOBS ZATE, SAUDI ARABIA
Start/End Dates: Feb 2015 - Apr 2016
Responsibilities: Working in MPP (Maintain Potential Projects)-Oil as
Instrumentation Design Engineer.
 Preparation of Instrument Design Packages.
 Acting as a checker to ensure quality design packages are
produced.
 Technical bid evaluation of different instruments from
different Vendors.
 Preparation of Instrument mounting typical and Material
Take-off list (MTO).
 Material Forecasting.
 Coordination of Instrument activities between the team.

3. Resume
Document Number 3
SHABEER.B.M
SENIOR INSTRUMENTATION DESIGN
ENGINEER
Project Title:Different MPP Oil Projects.
MPP- Oil projects includes preparation of Instrumentation Design
Package deliverables, Material Take-Off, Selection and Technical
Evaluation of different instruments and Control Systems, Material
forecasting etc for different Oil wells, Water Injection Wells & Water
Supply Wells in different areas of Saudi Arabia.
Client:Saudi Aramco.
Company:KENTZ ENGINEERING INTERNATIONAL CO. LTD., SAUDI
ARABIA
Start/End Dates: Feb 2012 - Jan 2015
Responsibilities: Worked as Instrumentation Design Engineer
 Preparation of Instrument Index, Input/Output list.
 Preparation of cable schedule & Interconnection Diagram.
 Generation of Instrument loop diagram
 Preparation of Logic Diagram, Cause & Effect matrix etc.
 Preparation of Instrument specification sheet or Data sheet.
 Preparation of cable routing & instrument location diagram.
 Selection & sizing of various instruments.
 Technical bid evaluation of different instruments from
different Vendors.
 Preparation of Process Hook-Ups and Pneumatic Hook-Ups.
 Preparation of Instrument mounting typical and Material
Take-off list (MTO).
 Coordination with the construction/third party agency to make
the as built in the project site.
 Preparing the Vendor Lists and Techno-Commercial
Discussion with Vendors for the Selection of Instrument.
Project Title:Liquified Natural Gas Terminal, AQABA, JORDAN
Client:AQABA Development Corporation, Jordan
Project Title:FEED for Vapour Recovery System.
Client:Qatar Petroleum (QP)
Project Title:PLC Upgradation and Automation at Oistins Pumping
Station, Barbados
Client:Barbados National Oil Company Limited
Project Title:Vapor Recovery System (VRS) – BDEP Phase.
Client:Saudi Aramco Shell Refinery (SASREF)
Project Title:Jubail Port Expansion -2.
Client:SABIC Terminal Services Co. (SABTANK)

4. Resume
Document Number 4
SHABEER.B.M
SENIOR INSTRUMENTATION DESIGN
ENGINEER
Project Title:Installation of MEG Standby Transfer Pump.
Client:Saudi Kayan Petrochemical Co.
Company:GULF PETROCHEMICAL SERVICES & TRADING LLC,
OMAN
Start/End Dates: Sept 2008 - Jan 2012
Responsibilities: Worked as Instrumentation Engineer
 Perform technical reviews of drawings, product data,
inspection reports, delivery schedules, vendors shop drawings and
technical data to assure compliance with the requirements of the
Contract.
 Preparation of win pcs and mark up of as built drawing.
 Leading Instrument, panel Installation and assist
Commissioning team.
 Coordination with planning team to develop work front
management.
 Manpower control and allocation.
 Calibration of field instruments.
 Preparation and development of detail termination drawing
for technicians.
 Inspection and Quality Checks of all instrument activities.
Project Title:Water Supply Scheme to Al-Duqum
Client:Ministry of Regional Municipalities and Water Resources,
Sultanate of Oman.
Project Title:Extension Stage -1 of Sewage Treatment Plant and
Sewerage System at Wilayat Khasab
Client:Ministry of Regional Municipalities and Water Resources,
Sultanate of Oman
Project Title:Installation, Testing & Commissioning of DFO Pipeline from
JAFZ to Aweer Power Station.
Client:Dubai Electricity & Water Authority (DEWA)
Project Title:Fahud Compressor Station.
Client:Oman Gas Company (OGC).
Project Title:Barka to Al-Gubrah 20” Pipeline.
Client:Oman Gas Company (OGC)

5. Resume
Document Number 5
SHABEER.B.M
SENIOR INSTRUMENTATION DESIGN
ENGINEER
Company:Accurate Instrumentation & Control Engineers Private Ltd
(AICE), Cochin, India.
Start/End Dates: Feb 2007 - Aug 2008
Responsibilities: Worked as Instrumentation Design Engineer
 Preparing the Vendor Lists and Techno-Commercial
Discussion with Vendors for the Selection of Instrument.
 Preparing Documents of P&I Diagrams, Detailing of Projects
Including the Database, Specifications, Design of Instruments &
calculations, Loop Diagrams, Functional Schematics.
 Preparation of cable schedule, Hook-ups Diagram, wiring
diagram and termination details of field instruments.
 Preparation of Instrument specification sheet (ISS)
Project Title:Ammonium Plant, Sharjah
Client:Greendome Petrochemicals, Sharjah
Project Title:Changing of DCS in Caprolactam and Anone plants.
Client:Fertilisers and Chemical Travancore (FACT), Cochin.
Company:Total Instrumentation Services, Cochin, India.
Start/End Dates: Aug 2006 - Jan 2007
Responsibilities: Worked as Instrumentation Engineer
 Design, Detailing, Planning, Estimation, Material
Procurement, Scheduling, Installation, Erection & Commissioning of
Automation Systems and Field Instruments
 Preparing the Vendor Lists and Techno-Commercial
Discussion with Vendors for the Selection of Instrument.
 Preparing Documents of P&I Diagrams, Detailing and
Planning of Projects Including the Database, Specifications, Design of
Instruments & calculations, Loop Diagrams, Functional Schematics.
 Planning and Execution of Project Works.
 Preparation of cable schedule, Hook-ups Diagram, wiring
diagram and termination details of field instruments.
 Installation, Calibration and Commissioning of Field
Instruments like PID Controller, Scanners, Level transmitter, Flow
transmitter, Pressure transmitter, Control Valves, I/P Converters,
Pressure Switches, Draft Indicators, Level Indicators, RTD, Pressure
Gauges, Temperature Gauges etc.
 Loop Checking and trouble shooting of PLC Control Panels,
DCS etc
Project Title:New Distillery Plant for Oudh Sugar Mills Ltd, Hargaon,
Uttar Pradesh, India
Client:K.K. Birla Group.

6. Resume
Document Number 6
SHABEER.B.M
SENIOR INSTRUMENTATION DESIGN
ENGINEER
Declaration
I hereby declare that all the statements made above are true and correct
to the best of my knowledge and belief.
Date: 17-Feb-2017
Place: Saudi Arabia
Shabeer.B.M