Usable electricity generation from the random noise

Dr. BABASAHEB AMBEDKAR MARATHWADA
UNIVERSITY,
AURANGABAD (M.S.)
PROJECT TITLE
Usable Electricity Generation From Available
Random Noise
Presented by
Saylee S. Joshi
Sonali K. Pawar
Under The Guidance of
Prof. V. M. Kulkarni
Thursday, March 2, 20171

Index
 Introduction
 Basic Block Diagram
 Conversion Of Sound Energy To Electrical Energy
 Sources Of Sound
 Noise Levels In Current World
 Literature Survey
 Methodologies Suggested
 Comparison In Methodologies

Index
 Block Diagram
 Circuit Diagram
 Super-capacitor
 Advantages & Disadvantages
 Applications
 Future Scope
 Conclusion-EEE Aspect

Introduction
 Can you imagine your life without your computer, mobile, lights and
other daily used appliances, it is really very hard to imagine our life
without these electric appliances.
 Electric consumption is increasing drastically, on the other hand
production of electric power is limited.
 It’s time to think of some alternative and green.
 Here we are introducing an alternative :
SOUND!!!

2013
5

 Noise pollution to electric energy….???
 Can sound be converted to useful energy…???

ALGORITHM
 Generation of power from the
piezoelectric material. This is the
starting point of our project,.
 Rectification of generated AC
voltage. As the power generated
from the piezo material is AC is
needed to be rectified.
 Storage of rectified voltage.
7

Conversion of sound energy to
electrical energy
 sound energy is a mechanical energy which travel in the form of
wave, mechanical wave that is an oscillation of pressure which need
medium to travel.
 As sound wave is a mechanical wave when it travels through a
medium it disturbs the particle of the medium these disturbance
created by sound could be used to produce electricity by the law of
thermodynamics.
 In our daily use we use many products in which the conversion
between sound energy and electric energy takes place For e.g.:- mic
, speaker , mobile phone ,transducers. However the amount of
conversion is very small and we require large amount of energy to
convert it so the problem is how we could convert efficiently.

SOURCES OF SOUNDS
Sr. No. Source Noise in decibels
1 Construction 90
2 Train Horn 110
3 Light Traffic 80
4 Heavy Traffic 100
5 Wild Birds 80
6 Wild Frogs croak 100

Where can we harvest sound ?
Industries
Thermal plants
Nuclear plants
Roads
Auditorium
Every where around us …..

Noise Levels in current world
 Noise means any sound energy that has
random amplitude and frequency and
which creates disturbance in the ecosystem
thereby causing pollution.
 Noise consists of super-positioning of
mechanical waves. Their direction of
propagation is in all direction and travels
with 330 to 345 m/s velocity.
 Today due to road trafficking and airplanes
there is formidable amount of noise
production.
 Noise pollution contributes about 3% in
the total global warming every year.
 It creates a cacophony and leads to brain
stress, mental trauma and may also result in
permanent hearing loss (deafness) .
11

Literature Survey

Sr. No. Name Of The Paper Name Of The
Author
Published In
Year And
Journal
Idea
1. Noise powered Nano
devices
Luca
Gammaitoni
NIPS
Laboratory,Ital
y-2008
The challenge is to realize self-
powered Nano scale electronic
devices.
2. Converting Sound
Energy To Electric
Energy
Shalabh
Rakesh
Bhatnagar
ISSN
2250,October
2012
Gives 3 methods for conversion.
3. Generation of usable
Electric power from
available random
sound Energy
G.R.Ahmed
Jamal,
Hamidul,Hasa
n, Amitav Das,
Jannatul,
Ferdous,
Sharmin
A.Lisa
IEEE-2013 Piezoelectric transducers are used for
conversion of sounds into electric
energy. The produced electric energy
from multiple piezoelectric
transducers are stored in multiple
super-capacitors which are then
summed up and amplified through
adder and voltage multiplier circuits.
4. Generation of
electrical energy
using piezo-electric
material from train
wheels
Md. Mostaqim
Billah Arnab,
Shah Md.
Rahmot
Ullah
IEEE-2014 The proposed conversion circuit was
tested in sound sources of train
wheels and a comparison was made
between other sources using this
conversion circuit and a better result
from train wheels have observed.

5. A Review Of Power
Harvesting From
Vibration Using
Piezo-electric
Material
Henry
A.Sodano,
Daniel J.
Inman
The Shock And
Vibration
Digest- May
2004
The use of piezoelectric materials to
capitalize on the ambient vibrations
surrounding a system is one method
that has seen a dramatic rise in use
for power harvesting.
6. Charging An
Electronic Gadget
Using Piezo-electric
Material
John
Livingston,
M.Hemlatha
Indian Journal
Of Science
And
Technology-
July 2014
The method of generating electrical
voltage for charging an electronic
gadget from the piezoelectric sensor
that is fixed to the sole of the
footwear is illustrated in this paper.
7. Power Harvesting
System In Mobile
Phones And Laptops
Using Piezo-electric
Charge Generation
Karthik
Kalyanaraman,
Jaykkrishna
Babu
World
Congress On
Engineering
And Compter
Science-
October 2010
This paper presents a model of
piezoelectric transducer for a gadget
like, mobile phone, and the overall
circuit for charging the mobile
battery using the generated energy.
8. Piezo-electric
Energy Harvesting
Systems In Mobiles
With Keypad And
Sound Vibrations
Revati G.,
Ingitham R.
International
Journal Of
Science And
Technology-
June 2012
In mobiles, the vibrations generated
by keypad stress and sound waves
will apply to a permanently-polarized
material such as quartz (SiO2) or
barium titanate (BaTiO3) which
produces an electric field due to
imposed mechanical force.

Methodologies suggested
Method 1-By creating apparatus using curtain (diaphragm)
magnet and conductor

Method 2- By converting sound
energy>heat energy and then heat
energy>electric energy
Sound Heat Electricity
16

Sound Piezo Electric Electricity
Method 3-By using transducers such as
piezo electric material which converts
mechanical strain>electric energy and vice-
versa.

Comparison between methodologies
Method 1 Method 2 Method 3
Uses 3rd law of
thermodynamics.
Uses principle of
Newton’s law.
Uses piezo-electric
material.
Uses Diphragms. Uses heat source. Uses super-capacitors.
Efficient only if high
decibel sound is
available.
Less efficient. Efficient process.
Lengthy process & can
be only used in nuclear
power plants.
Time consuming & only
usable for high density
materials.
Best suitable for
domestic & industrial
applications.

Block Diagram

Principle Of The Energy Harvesting System

SUPER-CAPACITOR

Circuit Diagram

Charging And Discharging Of Supercapacitor

Why Super-capacitors..???
Parameter
24

Advantages
 Slow discharging characteristics of super-capacitor, it can
hold this stored electric energy for a longer time than usual
capacitors.
 Piezoelectric materials is found to have useful application
for the production and detection of sound.
 No need of manpower during power generation.
 To store the electricity in DC rechargeable source.
 It can be use at any time when it necessary.
 Easy construction.
 Less number of parts required. Produced electricity can be
used for many purposes.

Disadvantages
 Lots of work is to be done in this field.
 Costlier because of supercapacitors.

Practical Difficulties
 It could not be used in the places where decibel of
sound is very low.

Applications
Battery charging circuits
for street lights
Power generating sources
for airports and aero drums
Auxiliary power generating
sources for factories dealing
with great amount of noise
everyday
28

Future scope
 New solution for Nano-scale energy harvesting .
 The noise pollution in road would able to convert into electric energy and
lights the street lightning ,signals and various other electrical appliances.
 The noise pollution in runway could be used to produce electricity.
 The electricity produce in nuclear power station could increase as the sound
produce during nuclear fission also could be used to get more electric
energy.
 The noise pollution in industries could be used to produce electricity and
work certain low voltage machine.

Conclusion (EEE)
Methods Energy Economy Environment
1 Less Highly Environment
Friendly
2 Moderate Moderate Not environment
Friendly
3 High Less Environment
Friendly
30

Conclusion
The proposed method opens the door
of a relatively less explored source of
green energy. It can give a new source
of green energy and can contribute in
global search for renewable energy.

References
 Journal Article
[1]G.R.AhmedJamal,HamidulHassan,AmitavDas,JannatulFerdous,SharminA.Lisa, “Genaration
of usable electric power from available random sound energy,” IEEE Trans. Sonics Ultrason.,
vol. SU-978, no. 1, pp. 4799-0400, 2013.
[2] ShalabhRakeshBhatnagar, “Converting sound energy to electric energy” IEEE ISSN 2250-
2459, vol-2 ,issue-10, October 2012.
 Article in an Anthology
[3] Luca Gammaitoni, “Noise powered nano devices” In EC workshop on molecular-scale
information systems,Brussels,30-01-2008.
 Encyclopedia Entry No author given:
[4] Sound to electricity haldia institute of technology, haldiaprayukti 2014 gospel cat.1 presented
by: rupesh kumara , sabornisan ,pragnya dasguptaa
[5] Though still in the research phase, such technology could mean a new era in energy generation
and conservation. “Harvesting acoustic noise is more about mechanical vibrations than sound
itself,” says Cohen-Tanugi.
[6] “The idea is definitely there, and it’s quite promising.”—Sarah Jensen
 Websites:
[7] www.google.com
[8] www.wikipedia.org
 Books:
[9]”Ultra-capacitors” by R.P.Deshpande

THANK YOU!!

Usable electricity generation from the random noise

Recommended

Recommended

More Related Content

What's hot

What's hot (20)

Viewers also liked

Viewers also liked (18)

Similar to Usable electricity generation from the random noise

Similar to Usable electricity generation from the random noise (20)

Recently uploaded

Recently uploaded (20)

Usable electricity generation from the random noise