2. It's all about you. Seems like a selfish statement in these sensitive
times, but at Moose Utility Division that is how we want you to feel.
It's also the primary reason we put the finest offering of ATV and UTV
accessories out there.
You are the hunter, the rancher, the outdoor recreationalist or maybe
even a savior when winter has unleashed its fury. Whatever you do,
you need your unit to perform and we're glad to help. After all, we're
all about you too.
OUR MISSION
PLOWS.....................................6-17
ACCESSORIES
APPLICATION CHART
HYDRAULIC TURN KIT
MOUNT/LIFT SYSTEMS
REPLACEMENT PARTS
RM3 MOUNTING SYSTEM
RM4 MOUNTING SYSTEM
STANDARD AND COUNTY BLADES
TIRE CHAINS
V-PLOW W/ HYDRAULICS
WINCHES............................... 18-19
ACCESSORIES
WINCHES
UTV......................................22-49
ARCTIC CAT PROWLER
HONDA BIG RED
KAWASAKI MULE
KAWASAKI TERYX
POLARIS RANGER
POLARIS RZR
UNIVERSAL ACCCESSORIES
YAMAHA RHINO
RACKS...................................52-61
ACCESSORIES
BACK REST
CARRIERS & HOLDERS
DROP RACK
GUN/BOW CARRIERS
MESH FRONT AND REAR RACKS
QUICK RELEASE SYSTEM
RACK EXTENSIONS
SPREADER
SPRAYERS
LUGGAGE................................62-77
ACCESSORIES
ALUMINUM CASES
COOLER BAGS
FENDER BAGS
FRONT STORAGE TRUNKS
REAR RACK BAGS
REAR STORAGE TRUNKS
TANK BAGS
BUMPERS...............................78-80
FRONT BUMPERS
REAR BUMPERS
BODY.................................... 82-88
CAB ENCLOSURES
CAMO TAPE KITS
COVERS
FENDER COVER KITS
FENDER EXTENSIONS
LICENSE PLATE HOLDER
SEAT COVERS
WINDSHIELDS
A-ARM GUARDS
CV BOOT GUARDS
SKIDPLATES
CONTROLS.............................89-94
FLOORBOARDS
GAUNTLETS
GRIPS
HANDGUARDS
HANDLEBARS
HAND AND GRIP WARMERS
HOLDERS GPS/PHONE, CUP
SEAT HEATER
SHIFT LEVERS
THUMB ASSISTS
ELECTRICAL..........................95-100
BATTERIES
HOUR METERS
IGNITION STATORS
POWER PORTS
SPOTLIGHTS
STARTERS
TRAILERS............................101-104
CARGO SLED
CARGO TRAILER
HITCHES
TIE-DOWNS
UTILITY TRAILER
RAMPS.....................................105
ARCHED FOLDING
BI-FOLD
TRI-FOLD
LUBES......................................106
CABLE LIFE LUBE
CAN RACK
CHAIN LUBE
DEGREASER
HEAVY DUTY CHAIN LUBE
PLASTIC CLEANER
SILOCONE SPRAY
SUSPENSION & DRIVE...........108-146
ACCESSORIES
AXLES & HALFSHAFTS
BALL JOINT & KING PIN KITS
BEARINGS
BRAKES
CV KITS & ACCESSORIES
DRIVE BELTS
FRONT AXLE ASSEMBLIES
LIFT KITS
ROTORS
TIE RODS
U-JOINTS
WHEEL BEARINGS
WHEEL SPACERS
ENGINE...............................147-155
AIR FILTERS
CARB REPAIR KITS
CLUTCH KITS
DRAIN PLUGS
GASKETS
POWER & JET KITS
RIDER ACCESSORIES............156-157
BOOT, HELMET & GLOVE DRYER
BOOTS
CASUAL APPAREL
GLOVES
HEADWEAR
HYDRATION PACK
MERCHANDISING.......................158
BANNERS
KEYCHAINS
SIGNS
STICKERS
4. NEW PRODUCT
6 7
WhatTo Order:
1. Push tube with hydraulics (4501-0191).
2. Bottom mount specific to your UTV (See chart).
3. 72” V-blade (4501-0197 & 4501-0198).
4. Winch & winch mount, if UTV doesn't already
have a winch mounted (See chart). See pages 18-19
for winches.
1-REQUIRED 2-REQUIRED 3-REQUIRED 3-REQUIRED 4-OPTIONAL
PUSH TUBE BOTTOM 72” V-BLADE 72” V-BLADE WINCH
FITS MODEL W/HYDRAULICS MOUNT LEFT RIGHT MOUNT
ARCTIC CAT
650 PROWLER 4X4 06-08 4501-0191 4501-0192 4501-0197 4501-0198 4505-0405
700 PROWLER H1 XTX 08 4501-0191 4501-0192 4501-0197 4501-0198 4505-0405
HONDA
BIG RED 09-10 4501-0191 4501-0224 4501-0197 4501-0198 4505-0406
KAWASAKI
610 MULE 4x4 05-10 4501-0191 4501-0193 4501-0197 4501-0198 4505-0400
750 TERYX 4X4 08-10 4501-0191 4501-0188 4501-0197 4501-0198 4505-0401
3010 Mules (2 Door) 07-08 4501-0191 4501-0194 4501-0197 4501-0198 4505-0399
4010 Mules 09-10 (not diesel) 4501-0191 4501-0194 4501-0197 4501-0198 4505-0398
POLARIS
RANGER 500 (ALL) 03-08 4501-0191 4501-0192 4501-0197 4501-0198 4505-0403
RANGER 700 (ALL) 05-08 4501-0191 4501-0192 4501-0197 4501-0198 4505-0403
RANGER 700 09 4501-0191 4501-0195 4501-0197 4501-0198 4505-0407
RANGER 800 10 4501-0191 4501-0195 4501-0197 4501-0198 4505-0407
RZR 800 08-09 4501-0191 4501-0192 4501-0197 4501-0198 4505-0404
YAMAHA
Rhino 450 06-09 4501-0191 4501-0188 4501-0197 4501-0198 4505-0402
Rhino 660 04-07 4501-0191 4501-0188 4501-0197 4501-0198 4505-0402
Rhino 700 08-09 4501-0191 4501-0188 4501-0197 4501-0198 4505-0402
INDEPENDENTRIGHTAND LEFTBLADE CONTROL
72”V-PLOW w/ HYDRAULICS
Independent right and left blade control.
Total forward to back swing of 60 degrees per side.
Heavy-duty, dual action cylinders with beefy 3/4”
chrome plated shafts. Hydraulic overload protection
to prevent cylinder damage. State of the art electronic
control package. Hand control features large buttons
for easy one hand operation while wearing gloves.
Winch required for raising and lowering the blade.
DESCRIPTION PART #
HYDRO-TURN KIT 4501-0279
HYDRO-TURN KIT
Allows you to turn your Moose Plow side to side without getting off the machine. Top-of-the-line parker industrial
hydraulics pump is used as the heart of this kit. Dual heavy-duty hydraulic cylinders, with 3/4” chrome-plated shafts,
turn the blade and hold it in position. Relief valve-protected easy thumb switch operation piggybacks to your winch
switch on the handlebars. No drilling required; the kit bolts to any moose plow, except the RM3. Requires a winch
for raising and lowering and a plow blade. Kit includes pre-assembled hydraulics package, manifold block, mounting
brackets, wiring harness, thumb switch, and complete instructions.
WHATTO ORDER:1. A Plow blade. Moose Plow blade 42”, 50”, 55”, 60” or 72” or County blade 50” or 60” (See pages 10-11).
2. A bottom mount specific to your ATV (See pages 14-16).
3. A universal extended lift push tube (Part # M93-11001).
4. A winch and winch mount (See pages 14-16, 18-19).
5. A hydro-turn kit (4501-0279).
5. 20+" LIFTHEIGHT
30+" LIFTHEIGHT
NEW PRODUCT
8 9
42” standard blade 4501-0067
50” standard blade M91-10050
50” black standard blade 4501-0042
55” standard blade 4501-0068
60” standard blade M91-10060
50” county blade M91-10051
60” county blade M91-10061
1-REQUIRED 2-REQUIRED 3-REQUIRED
FITS MODEL PLOW FRAME MOUNT PLATE WINCH MOUNT
arctic cat
400 TRV 09 4501-0147 4501-0186 4505-0356
500 4x4 07-08 4501-0147 4501-0186 4505-0356
550 H1 09 4501-0147 4501-0186 4505-0356
650 4x4 07-09 4501-0147 4501-0186 4505-0356
700 4x4 07-09 4501-0147 4501-0186 4505-0356
Cruiser 1000 CC 09 4501-0147 4501-0186 4505-0356
BOMBARDIER
Outlander 400 MAX XT 07-10 4501-0147 4501-0184 HAS OEM WINCH MT
Outlander 400 XT 07-10 4501-0147 4501-0184 HAS OEM WINCH MT
Outlander 500 MAX XT 07-10 4501-0147 4501-0184 HAS OEM WINCH MT
Outlander 500 XT 07-10 4501-0147 4501-0184 HAS OEM WINCH MT
Outlander 650 MAX XT 07-10 4501-0147 4501-0184 HAS OEM WINCH MT
Outlander 650 XT 07-10 4501-0147 4501-0184 HAS OEM WINCH MT
Outlander 800 XT 07-10 4501-0147 4501-0184 HAS OEM WINCH MT
Outlander 800 MAX XT 07-10 4501-0147 4501-0184 HAS OEM WINCH MT
HONDA
TRX420 Rancher 07-09 4501-0147 4501-01501,2
-
TRX500 Foreman 500 07-08 4501-0147 4501-0148 4505-0366
TRX500 Foreman 500 09 4501-0147 4501-0148 4505-0355
TRX500 Rubicon 07-08 4501-0147 4501-0148 4505-0366
TRX500 Rubicon 09 4501-0147 4501-0148 4505-0355
TRX680 Rincon 07-08 4501-0147 4501-0149 4505-0363
KAWASAKI
KVF650i Brute Force 07-09 4501-0147 4501-0187 4505-0373
KVF750i Brute Force 07 4501-0147 4501-0187 4505-0376
POLARIS
Sportsman 400 05-09 4501-0147 4501-0151 4505-0394
Sportsman 500 EFI 05-10 4501-0147 4501-0151 4505-0394
Sportsman 500 Touring EFI 08-10 4501-0147 4501-0151 4505-0394
Sportsman 500 X2 EFI 05-10 4501-0147 4501-0151 4505-0394
Sportsman 700 Twin EFI 05-09 4501-0147 4501-0151 4505-0394
Sportsman 800 Touring EFI 08-10 4501-0147 4501-0151 4505-0394
Sportsman 800 Twin EFI 05-10 4501-0147 4501-0151 4505-0394
Sportsman 800 X2 EFI 05-10 4501-0147 4501-0151 4505-0394
SUZUKI
King Quad 700 07 4501-0147 4501-0185 4505-0378
King Quad 750 08-09 4501-0147 4501-0185 4505-0378
YAMAHA
Grizzly 550 09 4501-0147 4501-0152 4505-0375
Grizzly 660 07-08 4501-0147 4501-0153 4505-0374
Grizzly 700 07-10 4501-0147 4501-0152 4505-0375
1
Included winch mount only accepts Superwinch 2000, 3000 and Moose 1700 winches only. 2
No roller fairlead included.
WHATTO ORDER:
1. Plow frame (4501-0147)
2. Mount plate specific to your ATV
3. Winch & winch mount, if UTV doesn't already
have a winch mounted (See chart). See pages 18-19
for winches.
4. Plow blade of your choice:
RM3 RAPID MOUNTPLOW SYSTEM
Third generation of Moose plow systems. Compact
front mount design. Easy on or off in seconds. 30
minute initial installation. 20+ inches of lift height.
Works only with winch lift. Black powder coat
paint. Some items imported.
1-REQUIRED 2-REQUIRED 3-REQUIRED
FITS MODEL PLOW FRAME MOUNT PLATE WINCH MOUNT
POLARIS
RANGER 09-10 4501-0306 4501-0308 4505-0407
YAMAHA
RHINO 700 09-10 4501-0306 4501-0307 4505-0402
WHATTO ORDER:
1. Plow frame (4501-0306)
2. Mount plate specific to your UTV
3. Winch & winch mount, if UTV doesn't already
have a winch mounted (See chart). See pages 18-19
for winches.
4. A 72" Moose Plow blade (M91-10072)
RM4 RAPID MOUNTPLOW SYSTEM
Industry leading triangulated front mount push tube distributes the plowing force over a wider
area for maximum strength and stability. Simple hand lever integrated into the push tube
engages and disengages the plow from the machine in seconds. Built in retractable kickstand
keeps your plow at the correct height to simply drive up and connect the plow. Class leading
lift height of over 30” on some models! Tough, machine-side mount bolts on easily without
modifications. Unique two-piece mount kit allows you to quickly remove the large machine-side
mount with two pins when not in use. Blade can be turned to any of 5 positions easily using the
blade position adjuster located on the push tube.
INTEGRATED
KICK-STAND
4501-0307
6. 10 11
COUNTYPLOW
Features a “wing” design and blade curve that guides
snow up and away from the surface you’re clearing.
The height of the wing measures 26” tall with the plow
tapering down to 16” at the end. Standard rubber plow
flap helps keep snow from blowing up and over into your
face. Side shield sold separately. See page 12.
MOOSE PLOW PART #
42” YELLOW BLADE 4501-0067
50” yellow blade M91-10050
50” black blade 4501-0042
55” YELLOW BLADE 4501-0068
60” yellow blade M91-10060
72” yellow blade M91-10072
55”
COUNTY PLOW PART #
50” yellow blade M91-10051
60” yellow blade M91-10061
MOOSE PLOW
Formed from 11-gauge steel, plow blade has a curved design that
provides better snow/dirt roll-off at any angle. Our standard 50”
blade clears a 44 1/2” path when angled and our 60” blade clears
53 1/2” path when angled. The 72” blade is designed for utility
vehicles, ATV’s 500cc and larger and clears a 64” path when
angled. Rubber plow flap sold separately. 72” blade comes
standard with plow flap. See page 12.
60"
72"
50”
42”
50”
60"
50”
WHATTO ORDER:
1. A Moose Plow blade 42”, 50”, 55”, 60” or 72”.
2. A bottom mount specific to your ATV (See pages 14-16).
3. A universal push tube (Part # M93-11001).
4. A blade lift system. Either a winch and winch mount, universal
hand lift or an electric plow lift (See pages 14-16, 18-19.
WHATTO ORDER:
1. A County Plow blade 50” or 60”.
2. A bottom mount specific to your ATV (See pages 14-16).
3. A universal push tube (Part # M93-11001).
4. A blade lift system. Either a winch and winch mount, universal
hand lift or an electric plow lift (See pages 14-16, 18-19).
MOOSE PLOW HYDRAULIC V-PLOW COUNTY PLOW
7. 12 13
M91-50022
M91-50020
M91-50021
M91-50023
M91-50080
UTVPUSHTUBE (OLD STYLE)
Blade swivel constructed of 3/8” steel. Five blade
swivel positions and four-way blade pitch adjustment.
30” in length.
BOTTOM MOUNT
Quick-connect mounting hardware for easy hook-up
and fast removal. Includes all necessary hardware to
attach universal push tube and plow. Provides more
ground clearance when plow blade is removed.
PUSHTUBE CONVERSION KIT
Converts old-style push tubes for use with
extended lift system bottom mount kits.
ELECTRIC PLOW LIFT
Lifts the plow without the need or use of a winch.
Screw-drive system runs at optimum speed; has plenty
of lifting power and low amp draw. Compact design
fits all Moose plow systems new or old except the
RM3 and hydraulic V-plow system. Inculdes wiring,
hardware and all-weather handlebar mounted switch.
ATV/UTVPUSHTUBE (NEW STYLE)
Increases ground clearance. Blade swivel constructed
of 3/8” steel. Five blade swivel positions and four-way
blade pitch adjustment. 46” in length.
WINCH MOUNTKIT
Winch mount kits accept Warn®
, Superwinch®
and all Moose winches. Comes complete with roller
fairlead.
UNIVERSALHAND LIFT
Adjustable stop for a universal fit. Equipped with
a longer handle for increased leverage. Designed to
disconnect with the push tube and blade when not in
use. Only works with extended lift push tubes.
PLOW LIGHTMOUNTKIT
Base made from steel. Light support arms made from
7-gauge steel. Great for night time, or early morning
plowing. Attaches to front rack of ATV. Uses 1 1/8”
u-bolts. Details for MDL01 Halogen light kit are on
page 95.
PLOW SIDE SHIELD
Reduce the amount of snow or dirt overflow. Put
side shields on both ends of a straight blade to contain
even more plowed material. Constructed from sturdy,
11-gauge steel and measures 15” tall x 10” deep. Some
drilling is required. Fits both the County Plow and
the Moose Plow. Sold separately.
RUBBER PLOW FLAP
Increases your control of airborne snow while plowing.
Comes standard on County Plow size 60”.
HEAVY-DUTYREPLACEMENTWEAR BARS
Available in 3” heavy-duty design for Moose.
Comes standard on Moose plows and County plows.
Reversable for longer life.
PLOW MARKERS
Clearly marks plow edges for increased visibility and
safety. Durable hard rubber; sold in pairs.
DESCRIPTION PART #
Plow Light Mount Kit 2001-0116
HALOGEN LIGHT KIT MDL01
Replacement bulb MDL01R
Replacement lens MDL01L
DESCRIPTION
bottom mount application chart on pg 14-16
DESCRIPTION
Winch mount kit application chart on pg 14-16
DESCRIPTION PART#
ATV/UTV push tube (new style) M93-11001
PUSH TUBE FOR ATVS WITH TRACK SYSTEM 4501-0107
DESCRIPTION PART #
Electric plow lift 4501-0309
DESCRIPTION PART #
Universal hand lift M93-30001
DESCRIPTION PART #
Push tube conversion kit 4501-0022
DESCRIPTION PART #
UTV PUSH TUBE (old style) M91-91001
DESCRIPTION PART #
MOOSE PLOW SIDE SHIELD M91-50010
CYCLE COUNTRY PLOW SIDE SHIELD M91-50012
DESCRIPTION PART #
50” RUBBER FLAP 4501-0069
55” RUBBER FLAP 4501-0070
60” RUBBER FLAP 4501-0071
72” RUBBER FLAP 4501-0072
DESCRIPTION PART #
42” MOOSE BLADE WEAR BAR 4501-0074
50” MOOSE BLADE WEAR BAR M91-50053
55” MOOSE BLADE WEAR BAR 4501-0075
60” MOOSE BLADE WEAR BAR M91-50063
72” MOOSE BLADE WEAR BAR (2-piece 36”) 4501-0045
MOOSE V-PLOW BLADE WEAR BAR (2-piece 36”) 4501-0290
60” CYCLE COUNTRY WEAR BAR M91-50065
DESCRIPTION PART #
16” plow markers M91-50040
SUSPENSION SPRING WEDGES
Installs in minutes and offers additional front or rear
suspension stiffness while using items such as snow
plows, sprayers, and spreaders. Fits most utility ATV
stock shocks with spring diameter up to 3”.
DESCRIPTION PART #
PLOW REPLACEMENT PARTS
Touch-up paint, yellow, .6-oz bottle 3712-0007
Touch-up paint, black, .6-oz bottle 3712-0008
Touch-up paint, red, .6-oz bottle 3712-0009
Lower mounting pin, short (pair) 4501-0015
Lower mounting pin, 2 1/2" (pair) 4501-0016
Plow blade pivot bolt (4-pk.) 4501-0088
Shoulder bolts, 3/8" x 3/4" (4-pk.) 4501-0089
5/16" U-bolt, 1 1/4" x 2 1/4" (12-pk.) 4501-0090
5/16" U-bolt, 1 1/8" x 2 1/4" (12-pk.) 4501-0091
Skid pins, 3/16" x 1 1/4" (4-pk.) 4501-0092
Rubber washer skids (8-pk.) 4501-0093
Spring blade position pins (4-pk.) 4501-0094
1/2" washer (20-pk.) 4501-0095
3/8" nylock nut (20-pk.) 4501-0096
5/16" nylock nut (48-pk.) 4501-0097
5/16" washer (48-pk.) 4501-0098
5/16" U-bolt, 1 1/4" x 2 3/4" (12-pk.) 4501-0099
5/16" U-bolt, 1 1/4" x 2" (12-pk.) 4501-0199
5/16" U-bolt, 1 3/8" x 2 3/16" (12-pk.) 4501-0200
5/16" U-bolt, 2 1/4" x 4 1/4" (12-pk.) 4501-0201
Wear bar nuts/bolts (18-pk.) 4501-0205
Blade skid washer kit (18-pk) 4501-0223
Manual lift replacement bushings (4pk) 4501-0305
Plow blade pivot bolt,(ea.) M91-50032
Blade position assembly (NOT FOR RM3 SYSTEMS) M91-50034
Blade Springs M91-50036
Blade stop kit M91-50038
hardware kit 4501-0073
DESCRIPTION PART #
BLADE SKID REPLACEMENTS
Extra-duty blade skid (NEW STYLE) M91-50020
SCREW IN plow skid (OLD STYLE) M91-50021
Conversion kit for NEW SKIDS M91-50022
Hardened skid (NEW STYLE) M91-50023
Screw-in style (old style) M91-50080
DESCRIPTION PART #
suspension spring wedges 0431-0260
9. 16 17
TIRE CHAINS
V-bar tire chains are available for
virtually any ATV. They provide
extra pushing/pulling power
for any job. Three sizes make
installation easy. Applications are
for rear tires unless noted. Tire
chains are packaged in a plastic
storage case; sold in pairs. Imported.
TIRE SIZE TIRE MFG. TIRE MODEL # PART #
20X10.00-9 DUNLOP KT185B M91-60008
21X10.00-8 DURO AT M91-60008
22X10.00-10 DUNLOP KT705,KT765A,KT857 M91-60008
22X10.00-10 CHENG SHIN AT M91-60008
22X10.00-10 KENDA PATHFINDER AT M91-60008
22X10.00-8 DUNLOP K1537 M91-60008
22X10.00-8 MAXXIS MAVERICK M91-60008
22X10.00-9 DUNLOP KT155,KT175,KT775B M91-60008
22X10.00-9 GOODYEAR HP M91-60008
22X10.00-9 OHTSU PV702 M91-60008
22X11.00-10 DUNLOP KT406A M91-60008
22X11.00-10 TITAN AT489 M91-60008
22X11.00-10 GOODYEAR WRANGLERSPORT M91-60008
22X11.00-10 GOODYEAR/TITAN TERRA M91-60008
22X11.00-10 CARLISLE BADLANDS M91-60009
22X11.00-10 DUNLOP KT765,KT869,KT869A M91-60009
22X11.00-10 ITP HOLESHOT XCT M91-60009
22X11.00-8 BRIDGESTONE MH02,MH02A M91-60008
22X11.00-8 DUNLOP KT517,KT529 M91-60008
22X11.00-8 IRC EL08 M91-60008
22X11.00-8 OHTSU H-TRACK,PRO-VECTOR 301 M91-60008
22X11.00-9 DUNLOP KT827 M91-60008
22X7.00-10 MAXXIS AT M91-60008
22X9.00-10 OHTSU H-TRACK P/V702 M91-60008
22X9.00-8 GOODYEAR ATT 902 M91-60008
23X8-10 DUNLOP KT401 M91-60008
23X8-10 DUNLOP KT405 M91-60008
23X10.00-12 DUNLOP KT407 M91-60008
23X10.00-12 MAXXIS LYNX M91-60009
23X11.00-10 DUNLOP KT869 M91-60010
23X8.00-11 OHTSU A/T 504 M91-60008
24X10.00-11 BRIDGESTONE DIRTHOOKS 14 M91-60009
24X10.00-11 DUNLOP KT962A,KY962 M91-60009
24X10.00-11 GOODYEAR TRACKER ATT,TRACKER MP M91-60010
24X10.00-12 DUNLOP KT405H M91-60010
24X11.00-10 DUNLOP KT765,KT869 M91-60009
24X11.00-10 GOODYEAR WRANGLERSPORT M91-60009
24X11.00-10 TITAN AT489 M91-60009
24X11.00-10 DURO EXCAVATOR M91-60010
24X11.00-12 CARLISE AT489 M91-60009
24X11.00-12 TITAN AT489 M91-60009
24X11.00-9 BRIDGESTONE DIRT HOOK-10 M91-60010
24X11.5-10 TITAN AT489 M91-60010
24X12.00-12 DUNLOP KT405H M91-60010
24X13.00-9 DUNLOP KT724 M91-60010
24X8.00-11 GOODYEAR TRACKER ATT M91-60008
24X9.00-11 BRIDGESTONE DIRT HOOK M91-60009
24X9.00-11 GOODYEAR ATT 913 M91-60009
24X9.00-11 OHTSU A/T 502,H-TRAC A/T M91-60009
24X9.00-12 TITAN AT480,AT489 M91-60009
25X10.00-10 DURO AT M91-60008
25X10.00-10 DUNLOP KT126 M91-60010
25X10.00-11 DUNLOP KT405B M91-60010
25X10.00-12 DUNLOP KT127,KT135 M91-60009
25X10.00-12 TITAN AT489 M91-60009
TIRE SIZE TIRE MFG. TIRE MODEL # PART #
25X10.00-12 BRIDGESTONE DIRTHOOK M91-60010
25X10.00-12 CARLISLE TRAILWOLF M91-60010
25X10.00-12 DUNLOP AT,KT125,KT127,KT127A,KT135,KT185,KT195,
KT405A,KT405C,KT405D,KT405E,KT405H,KT406,
KT415,KT645,KT955,KT127 M91-60010
25X10.00-12 GY RAWHIDE RS M91-60010
25X10.00-12 KENDA RADIAL BOUNTY HUNT M91-60010
25X10.00-12 MAXXIS AT, M912Y,NHS M91-60010
25X10.00-12 OHTSU H-TRAK,H-TRAK ZA602,U/R 301,ZA602 M91-60010
25X10.00-13 DUNLOP KT405G M91-60010
25X11.00-10 TITAN AT489 M91-60008
25X11.00-10 DUNLOP KT125,KT125M,KT905 M91-60010
25X11.00-10 GOODYEAR TRACKER CL, TRACKER P M91-60010
25X11.00-12 CARLISLE TRAILWOLF M91-60008
25X11.00-12 CARLISLE ACT,AT489,BADLANDS XTR, TRAILWOLF M91-60010
25X11.00-12 DUNLOP KT127,KT127B M91-60010
25X11.00-12 GOODYEAR RAWHIDE, RAWHIDE GRIP M91-60010
25X11.00-12 OHTSU H-TRAK ZA601 M91-60010
25X11.00-12 TITAN AT489 M91-60010
25X11.00-9 DUNLOP KT687 M91-60008
25X11.00-9 GOODYEAR ATT 912 M91-60009
25X12.00-10 DUNLOP KT121,KT125,KT125M,KT825 M91-60010
25X12.00-10 GOODYEAR TRACKER P M91-60010
25X12.00-12 DUNLOP KT127B M91-60010
25X12.00-9 DUNLOP KT430 M91-60009
25X12.00-9 BRIDGESTONE DIRTHOOK-04 M91-60010
25X12.00-9 DUNLOP KT405,KT565,KT725M M91-60010
25X12.00-9 MAXXIS m91-60010
25X12.00-9 OHTSU H-TRAC 501,H-TRAC-II,PRO/AM 501 M91-60010
25X8.00-12 BRIDGESTONE DIRT HOOK M91-60008
25X8.00-12 CARLISLE ACT,TRAILWOLF M91-60008
25X8.00-12 DUNLOP KT401A,KT401C M91-60008
25X8.00-12 DUNLOP KT121,KT191,KT402,KT404,KT951 M91-60009
25X8.00-12 GY RAWHIDE RS M91-60009
26X10.00-12 CARLISLE TRAILWOLF M91-60010
26X10.00-12 OHTSU ZA601SP M91-60010
26X10.5-12 TITAN AT495 M91-60010
26X11.00-12 GOODYEAR RAWHIDE MT/R M91-60010
26X11.00-12 POLARIS PXT M91-60010
replacement case 0366-0001
POLARIS (con't)
Sportsman 850 XP 09-10 4501-0204 M93-11001 M93-30001 4505-0396 4501-0309
Ranger 400 4x4 2010 4501-0192 M93-11001 - - -
Ranger 500 6x6/4x4 05-08 (new style using ATV M93- push tubes) 4501-0192 M93-11001 - 4505-0403 -
Ranger 500 4x4 09 4501-0195 M93-11001 - 4505-0407 -
Ranger 700 4x4 (XP) 05-08 (new style using ATV M93- push tubes) 4501-0192 M93-11001 - 4505-0403 -
Ranger 700 4x4 (XP) 09 4501-0195 M93-11001 - 4505-0407 -
Ranger 700 6x6 09 4501-0192 M93-11001 - 4505-0403 -
Ranger 800 4x4 2010 4501-0195 M93-11001 - 4505-0407 -
RZR/RZR-S 800 08-09 4501-0192 M93-11001 - 4505-04041
-
SUZUKI
Ozark 250 04-06 4501-0078 M93-11001 - - 4501-0309
LTF 250 QuadRunner 99-00 M93-63003 M93-11001 M93-30001 - 4501-0309
LTF 250 QuadRunner 01 M93-63003 M93-11001 M93-30001 - 4501-0309
LT4WD, LTF 250 90-98 M93-63001 M93-11001 M93-30001 4505-0377 4501-0309
LTF 280X/300 King Quad 91-98 M93-63001 M93-11001 M93-30001 4505-0377 4501-0309
LTF 300 King Quad 99-00 M93-63003 M93-11001 M93-30001 - 4501-0309
LTF 300 King Quad 01-02 M93-63003 M93-11001 M93-30001 - 4501-0309
QuadRunner Eiger Manual/Auto 400 4x4 02-07 4501-0013 M93-11001 M93-30001 4505-0386 4501-0309
King Quad 400 08-09 4501-0013 M93-11001 M93-30001 4505-0397 4501-0309
King Quad 450 07-09 4501-0040 M93-11001 M93-30001 4505-0378 4501-0309
King Quad 500 09 4501-0040 M93-11001 M93-30001 4505-0378 4501-0309
LTF 500 QuadRunner 98-02 4501-0013 M93-11001 M93-30001 - 4501-0309
QuadRunner Vinson 500 Manual/Auto 02-07 4501-0013 M93-11001 M93-30001 4505-0386 4501-0309
Twin Peaks 700 04-05 M93-62005 M93-11001 M93-30001 4505-0369 4501-0309
King Quad 700 05-07 4501-0040 M93-11001 M93-30001 4505-0378 4501-0309
King Quad 750 08-09 4501-0040 M93-11001 M93-30001 4505-0378 4501-0309
YAMAHA
250 Bruin 05 2x4 4501-0080 M93-11001 M93-30001 - 4501-0309
Grizzly 350 07-10 (Independent Susp) M93-64008 M93-11001 M93-30001 4505-0381 4501-0309
Bruin 350 4x4 04-06 M93-64008 M93-11001 M93-30001 4505-0381 4501-0309
Wolverine 350 4x4 95-05 M93-64005 M93-11001 M93-30001 4505-0389 4501-0309
Wolverine 350 4x4 07-09 M93-64008 M93-11001 M93-30001 4505-0383 4501-0309
Big Bear 350 4x4 94-96 M93-64003 M93-11001 M93-30001 - 4501-0309
Big Bear 350 4x4 97-99 M93-64005 M93-11001 M93-30001 - 4501-0309
YFM400 Big Bear 4x4 00-06 M93-64005 M93-11001 M93-30001 4505-0372 4501-0309
YFM400 Big Bear 4x4 07-09 4501-0104 M93-11001 M93-30001 4505-0382 4501-0309
YFM400 Kodiak FWT 93-98 M93-64003 M93-11001 M93-30001 - 4501-0309
Kodiak 400 99 M93-64005 M93-11001 M93-30001 - 4501-0309
Kodiak 400 Ultramatic 00-02 M93-64008 M93-11001 M93-30001 4505-0371 4501-0309
Kodiak 400 4x4 03-05 M93-64008 M93-11001 M93-30001 4505-0381 4501-0309
Grizzly 450 07-08 M93-64008 M93-11001 M93-30001 4505-0381 4501-0309
Grizzly 450 09-10 M93-64008 M93-11001 M93-30001 4505-0358 4501-0309
Kodiak 450 4x4 & Auto 03-06 M93-64008 M93-11001 M93-30001 4505-0381 4501-0309
Wolverine 450 06-09 M93-64008 M93-11001 M93-30001 4505-0383 4501-0309
Grizzly 550 09-10 M93-64017 M93-11001 M93-30001 4505-0375 4501-0309
Grizzly 600 98-01 M93-64004 M93-11001 M93-30001 4505-0370 4501-0309
Grizzly 660 02-08 M93-64017 M93-11001 M93-30001 4505-0374 4501-0309
Grizzly 700 EFI 07-10 M93-64017 M93-11001 M93-30001 4505-0375 4501-0309
Rhino 450 06-09 (new style using ATV M93- push tubes) 4501-0188 M93-11001 - 4505-0402 -
Rhino 450 06-09 (old style using UTV M91-push tube) 4501-0005 M91-91001 - 4505-0402 -
Rhino 660 06-07 (new style using ATV M93- push tubes) 4501-0188 M93-11001 - 4505-0402 -
Rhino 660 04-07 (old style using UTV M91-push tube) 4501-0005 M91-91001 - 4505-0402 -
Rhino 700 08-09 (new style using ATV M93- push tubes) 4501-0188 M93-11001 - 4505-0402 -
Rhino 700 08-09 (old style using UTV M91-push tube) 4501-0005 M91-91001 - 4505-0402 -
1
WILL NOT WORK WITH WARN 4000LB WINCH
EXT. LIFT UNIVERSAL OPTION 1: OPTION 2: OPTION 3:
BOTTOM MOUNT PUSH TUBE UNIVERSAL HAND WINCH MOUNT ELECTRIC LIFT
FITS MODEL PART # PART # LIFT PART # PART # PART #
WHATTO ORDER:
1. A plow blade (Moose blade 42”, 50”, 55”, 60” or 72” or County blade 50” or 60”).
2. A bottom mount specific to your ATV.
3. A universal lift push tube (part # M93-11001).
4. A blade lift system (either a winch and winch mount, universal hand lift or an electric plow lift.
PLOW MOUNTING HARDWARE
8-V BAR – 14.5” W X 52” L (M91-60008)
9-V BAR – 14.5 W X 54” L (M91-60009)
10-V BAR – 17” W X 56” L (M91-60010)
11-V BAR – 17" W x 66" L (Will fit big wheel
kits) (0366-0002)
10. 18 19
DESCRIPTION PART #
1700-lb. winch 4505-0017
replaCEMENT PARTS
HOUSING ASSemBLY KIT 4505-0231
ROCKER SWITCH KIT 4505-0232
WIRE ROPE 5/32” X 50’ 4505-0233
DESCRIPTION PART #
3700-lb. winch 4505-0408
DESCRIPTION PART #
Roller fairlead M91-50070
DESCRIPTION PART #
large Roller fairlead 4505-0294
DESCRIPTION PART #
3/16” X 50’ SYNTHETIC WINCH CABLE 4505-0343
DESCRIPTION PART #
1700-lb. winch w/synthetic rope 4505-0332
replaCEMENT PARTS
HOUSING ASSemBLY KIT 4505-0231
ROCKER SWITCH KIT 4505-0232
DESCRIPTION PART #
3000-lb. winch w/synthetic rope 4505-0331
replaCEMENT PARTS
contactor/solenoid W63070
ROCKER SWITCH KIT W64851
50' synthetic rope 4505-0313
1700-LB. WINCH
1700-lb. capacity winch. Draws a mere 70 amps at
1,700 lb. 12V DC motor with 112:1 gear ratio. Free
spool cam-activated clutch and standard mechanical
disk brake. 50' of 5/32” cable. Handlebar-mounted
mini-rocker switch with contactor gear train.
1700-LB. WINCH
W/SYNTHETIC ROPE
1700-lbs. of pulling power with synthetic rope. 50’ of
synthetic winch rope is lightweight, easy to handle and
great for lifting a plow blade. Mechanical disk brake.
12V DC motor with 112:1 gear ratio. Free spool
cam-activated clutch. Handlebar mounted mini-rocker
switch with contactor gear train.
3000-LB. WINCH
W/SYNTHETIC ROPE
3000-lbs. of pulling power with synthetic rope. 50’ of
synthetic winch rope is lightweight, easy to handle and
great for lifting a plow blade. Mechanical brake to
hold the heaviest plows with no creep. Smooth, long-
lasting 3-stage planetary geartrain and plastic housing.
Weatherproof handlebar mounted mini-rocker control
switch.
3700-LB. WINCH
3,700-lbs. of rated pull. 50' x 13/64" wire rope.
Handlebar mounted toggle switch and a heavy-duty
sealed relay. Includes 6' hand-held remote and socket.
Free spooling clutch. Color coded wiring for easy
installation. Imported.
3/16” X 50’ SYNTHETIC WINCH CABLE
Eliminate wire slivers and extra weight. New
synthetic ATV winch cable is safer than traditional
wire cable. For aluminum drum winches. Tubular
abrasion protector extends rope life. Soft eyelet on
working end to easily thread through snatch blocks.
4000 lb. working load. For ATV use only. Meets ATV
competition and club specifications when used with
screw pin shackle.
ROLLER FAIRLEAD
Designed to reduce cable wear, especially on sharp angle
pulls.
LARGE ROLLER FAIRLEAD
Designed for use with winches that primarily raise and
lower the ATV plow blade. Larger diameter lower
roller reduces wear on rope. Imported.
DESCRIPTION PART #
WINCH CUSHION 4505-0349
WINCH CUSHION
Stops hook before it reaches the roller fairlead. Smooth
stopping action prevents damage to winch cable. Made
of a durable, high-impact absorbing rubber.
NEW PRODUCT
NEW PRODUCT
11. 20 21
FIVE DIFFERENT UTV BRANDS
TWENTY DIFFERENT UTV MODELS
ONE HUNDRED DIFFERENT UTV PRODUCTS
WE’RE DIFFERENT ALRIGHT...
ONE OF A KIND
12. 22 23
OVERALL OVERALL
fits model WIDTH HEIGHT part#
ARCTIC CAT PROWLER 650 04-09 53 1/2” 29 1/2” 2317-0088
replacement hood pucks (2 piece) - - 2317-0057
CLOSED
ARCTIC CAT PROWLER full CAB ENCLOSURE part #
BLACK (40 oz. tonneau-tex vinyl) 0521-0561
MOSSY OAK BREAK-UP®
(500 denier cordura®
) 0521-0562
ARCTIC CAT PROWLER ROOF Cover part #
BLACK (40 oz. tonneau-tex vinyl) 0521-0563
MOSSY OAK BREAK-UP®
(500 denier cordura®
) 0521-0564
ARCTIC CAT PROWLER BED COVER part #
BLACK (40 oz. tonneau-tex vinyl) 0521-0565
MOSSY OAK BREAK-UP®
(500 denier cordura®
) 0521-0566
ARCTIC CAT PROWLER COWL COVER part #
BLACK 0521-0567
MOSSY OAK BREAK-UP®
0521-0568
ARCTIC CAT PROWLER SEAT COVER part #
BLACK 0821-0774
MOSSY OAK BREAK-UP®
0821-0775
PROWLER FULLFOLDING WINDSHIELD
Premium .177” thick clear polycarbonate shield. Centrally hinged for
ventilation. Tool-less operation. Stainless steel rubber coated mount straps.
OVERALL OVERALL
fits model WIDTH HEIGHT part#
ARCTIC CAT PROWLER 650 04-09 59” 59” 2317-0051
PROWLER HALF WINDSHIELD
Premium .177” thick polycarbonate. Stainless steel rubber coated mounting clamps.
PROWLER COWLCOVER
Made from waterproof 500 denier Cordura®. Fastens to the hood with supplied
adhesive backed hook-and-loop closures and plastic clips. Protects cowl from nicks
and scratches and finishes the camo look when used with our full cab (on previous
page).
PROWLER SEATCOVER
Made from waterproof 500 denier Cordura®. Uses elastic around outer edge to
attach under seat bottom and seat back. Seat cover offers great protection to factory
seats with easy installation and no tools needed. Mounting items and instructions
included. Sold in pairs.
PROWLER ROOF COVER
The roof cap fastens to roll bars with rubber coated nylon webbing with hook-and-
loop closures. Roof Cap has two straps inside top to keep cover tight and rain from
ponding on top of cover. Waterproof material. Perfect to keep you in the shade and
out of the rain.
PROWLER BED COVER
Tailgate can be raised and lowered without removing cover. Easy access from all
sides including the Prowlers cab by releasing clips that engage factory lip around
bed. This is a very high-quality bed cover that is waterproof and has the capacity to
expand to a fully loaded bed.
PROWLER FULLCAB ENCLOSURE
Features waterproof shell with automotive grade clear flexible acrylic windshield,
doors and back window. Doors are completely removable and have full length
double pull zippers. Cab comes complete with necessary self adhesive hook-and-loop
closures and installation and care instructions.
ARCTIC CAT UTV
OPEN
13. 24 25
OPEN CLOSED
BIG RED FULLCAB ENCLOSURE
Features waterproof shell with automotive grade clear flexible acrylic windshield,
doors and back window. Doors are completely removable and have full length
double pull zippers. Cab comes complete with necessary self adhesive hook-and loop,
installation and care instructions.
BIG RED ROOF COVER
Roof cap fastens to roll bars with rubber coated nylon webbing and self adhesive
hook-and-loop. Roof Cap has two straps inside top to keep cover tight and rain
from ponding on top of cover. Waterproof material. Perfect to keep you in the shade
and out of the rain.
BIG RED BUCKETSEATCOVERS
Made from waterproof 500 denier Cordura®. Elastic outer edge attaches covers to
seat bottom and back. Includes: one pair of seat covers and headrest covers.
BIG RED BATTERYTRAY
Battery tray allows you to upgrade to a high powered battery or add an additional
battery to your Big Red. Attaches to frame under your hood (to the right of your
stock battery box). Powder coated for superior protection. 9 7/8”L x 7 1/8”W x
6 1/2”H. Includes mounting hardware and battery cables. Battery cables can be
used with a 5/16" stud or traditional post. NOTE: It is recommended that a larger
battery be used when mounting a winch to the Big Red.
BIG RED FULLFOLDING WINDSHIELD
Premium .177” thick clear polycarbonate shield. Centrally hinged for ventilation.
Tool-less operation. Stainless steel rubber coated mount straps.
BIG RED HALF WINDSHIELD
Premium .177” thick polycarbonate. Stainless steel rubber coated mounting clamps.
HONDA BIG RED FULL CAB ENCLOSURE part #
BLACK (40 oz. tonneau-tex vinyl) 0521-0818
MOSSY OAK BREAK-UP®
(500 denier cordura®
) 0521-0819
HONDA BIG RED ROOF COVER part #
BLACK (40 oz. tonneau-tex vinyl) 0521-0824
MOSSY OAK BREAK-UP®
(500 denier cordura®
) 0521-0825
HONDA BIG RED bucket SEAT COVERS part #
BLACK 0821-0993
MOSSY OAK BREAK-UP®
0821-0994 fits model PART #
HONDA BIG RED battery tray 0521-0771
OVERALL OVERALL
fits model WIDTH HEIGHT part#
HONDA BIG RED 09-10 59 3/8” 10 3/4” 2317-0067
OVERALL OVERALL
fits model WIDTH HEIGHT part#
HONDA BIG RED 09-10 59 3/8” 31 3/4” 2317-00921
replacement hood pucks (2 piece) - - 2317-0057
1
NOT FOR USE WITH HONDA OEM ROOF
HONDA BIG RED UTV
14. 26 272726
CLOSED
OPEN
2317-0053
2317-0090
2317-0090
FULLFOLDING WINDSHIELD
Premium .177” thick clear polycarbonate shield. Centrally hinged for ventilation.
Tool-less operation. Stainless steel rubber coated mount straps.
HALF WINDSHIELD
Premium .177” thick polycarbonate. Stainless steel rubber coated mounting clamps.
OVERALL OVERALL
fits model WIDTH HEIGHT part#
KAWASAKI MULE 610 07-09 (NOT SHOWN) 46” 17” 2317-0050 1
KAWASAKI MULE 4010 09 (NOT SHOWN) 53” 12 1/2” 2317-00651
KAWASAKI TERYX 08-09 48” 10 1/2” 2317-0053
1
NO HOOD ACCESS
OVERALL OVERALL
fits model WIDTH HEIGHT part#
KAWASAKI MULE 3000 00-08 (NOT SHOWN) 37” 54” 2317-0089
KAWASAKI MULE 4010 09-10 (NOT SHOWN) 30 1/4” 53” 2317-00911
KAWASAKI TERYX 08-10 28” 48” 2317-0090
replacement hood pucks (2 piece) - - 2317-0057
1
NO HOOD ACCESS
KAWASAKI UTV
FITS MODEL PART #
KAWASAKI TERYX BACK PANEL 08-10 0521-0869
TERYX BACK PANEL
Constructed of .177" thick clear polycarbonate. Adds a finished look to your UTV
and provides an effective barrier to keep debris from entering the cab.
TERYX HALF FOLDING WINDSHIELD
Heavy-duty Lexan, clear shield with black trim. Provides great wind deflection.
Comes with all hardware and mounting brackets. Easily folds onto hood.
Imported.
OVERALL OVERALL
fits model WIDTH HEIGHT part#
KAWASAKI MULE 3010 00-08 (NOT SHOWN) 54" 36" 2317-0095
KAWASAKI MULE 4010 09 (NOT SHOWN) 53" 30 1/4" 2317-00991
KAWASAKI TERYX 08-09 48 3/4" 28" 2317-0096
1
NO HOOD ACCESS
FULLWINDSHIELD
Premium .177” thick clear polycarbonate shield. Mounts to roll bar using stainless
steel, rubber-coated mount straps.
CLOSED
OPEN
2317-034
2317-0034
MULTI - FULL
2317-0107
MULTI WINDSHIELD
Split windshield design allows the rider to configure the windshield. Three
configurations (upper, lower and full). Mounts easily and can be quickly configured
without tools. Trailerable to 65 mph. Constructed from optical grade acrylic.
Comes with storage bag for storing one section at a time. Imported.
fits model PART #
KAWASAKI TERYX light bar 08-09 2040-0550
repl. light 2040-0551
TERYX LIGHTBAR
Tubular steel construction with a powder-coated finish. Four, 6" - 55 watt halogen
lights with a unique radius design provide a panoramic light display. Simple clamp
on design with a vehicle specific OEM wire loom. Comes with in-dash swith and
relay. Imported.
fits model PART #
KAWASAKI TERYX BED COOLER 08-09 1512-0061
TERYX BED COOLER
Rotational molded, plastic construction. Two large wet/dry storage areas (1825
cubic inches) with drain plugs. One wet/dry storage area (635 cubic inches) with
removable lid, storage tray and drain plug. Two gas assist shocks hold the lid open.
Two draw tight latches keep the lid secure. Convenient storage for separating ice
and beverages from dry goods. Contents not included. Imported.
TERYX BEDTRUNK
Includes three removable storage boxes (each measuring 12” L x 8.5” W x 12.75”H).
Removable tool trays and nylon straps with buckles to hold the lids tight. Provides
convenient weather resistant storage and easy access for separating all of your supplies.
Imported.
OVERALL OVERALL
fits model WIDTH HEIGHT part#
KAWASAKI TERYX 08-09 49” 18” 2317-0034
2317-096
MULTI - LOWER
2317-0107
fits model PART #
KAWASAKI TERYX 08-09 2317-0107
fits model PART #
KAWASAKI TERYX BED TRUNK 08-09 1512-0062
NEW PRODUCT
NEW PRODUCT
NEW PRODUCT
15. 28 29
MULE CAB ENCLOSURES
Perfect for winter or rainy weather. Zippered doors for fast entry; straps keep doors
rolled up and open. Heavy acrylic windshield. Waterproof material.
MULE ROOF COVERS
Perfect for winter or rainy weather. Includes adhesive backed hook-and-loop
closure for mounting to roll cage. Waterproof material.
TERYX CAB ENCLOSURES
Perfect for winter or rainy weather. Zippered doors for fast entry; straps keep doors
rolled up and open. Heavy acrylic windshield. Waterproof material.
TERYX ROOF COVERS
Perfect for winter or rainy weather. Includes adhesive backed hook-and-loop
closure for mounting to roll cage. Waterproof material.
BED COVERS
Includes adhesive backed hook-and-loop closure for
mounting to bed rail. Waterproof material.
MULE BENCH SEATCOVER
Made from 500-denier waterproof Cordura®
. Protects
the seat from punctures and daily wear.
MULE COWLCOVER
Made from 500-denier waterproof Cordura®
.
Protects the front of your Mule from debris.
Uses plastic clips and adhesive hook-and-loop closure
for a no-drill installation.
BED COVERS
Made from 500-denier waterproof Cordura®
. Includes
adhesive backed hook-and-loop closure for mounting
to bed rail.
TERYX BUCKETSEATCOVERS
Made from 500-denier waterproof Cordura®
. Elastic
outer edge attaches covers to seat bottom and back.
Includes: one pair of seat covers and headrest covers.
fits model PART #
MULE 610
Black (40 oz. tonneau-tex vinyl) 0521-0284
Mossy Oak Break-Up®
(500 denier cordura®
) 0521-0285
MULE 2500/3000/4000
Black (40 oz. tonneau-tex vinyl) MUDKM-116
Mossy Oak Break-Up®
(500 denier cordura®
) MUDKM-118
MULE TRANSPORT (4-SEATER)
Black (40 oz. tonneau-tex vinyl) 0521-0288
fits model PART #
MULE 610
BLACK (40 oz. tonneau-tex vinyl) 0521-0286
Mossy Oak Break-Up®
(500 denier cordura®
) 0521-0287
MULE TRANSPORT (4-SEATER)
BLACK (40 oz. tonneau-tex vinyl) 0521-0289
Mossy Oak Break-Up®
(500 denier cordura®
) 0521-0290
FITS MODEL PART #
MULE TRANSPORT (4-SEATER)
BLACK 0521-0291
Mossy Oak Break-Up®
0521-0292
KAWASAKI TERYX ROOF CAP part #
BLACK (40 oz. tonneau-tex vinyl) 0521-0635
Mossy Oak Break-Up®
(500 denier cordura®
) 0521-0636
KAWASAKI TERYX BED COVER part #
Mossy Oak Break-Up®
0521-0638
FITS MODEL PART #
MULE 610
BLACK 0821-0521
Mossy Oak Break-Up®
0821-0522
MULE TRANSPORT (4-SEATER)
BLACK 0821-0523
Mossy Oak Break-Up®
0821-0524
MULE 2500/3000/4000
Black MUDKM-124
Mossy Oak Break-Up®
MUDKM-126
KAWASAKI TERYX bucket seat covers PART #
BLACK 0821-0911
Mossy Oak Break-Up®
0821-0912
KAWASAKI UTV
MULE 610TRAILER HITCH
Get more use out of your Mule by adding a powder
coated trailer hitch.
TERYX EXHAUSTTIP
Made from CNC-billet aluminum. Angled exhaust
port and machined gun barrel divots on the tip. Angle
directs exhaust flow down and away from fenders and
tailgates. Comes with mounting bolts and screen.
MULE LIFTKIT
Lift blocks accommodate to a 1 1/2” overall. Kits fit
only the rear of the 2000 series and only the front of the
3000 series. Imported.
fits model PART #
ALL 2000/3000 SERIES MULES MUDKLK01
fits model PART #
mule 610 4504-0037
fits model PART #
TERYX 750 08-09 1861-0481
fits model PART #
KAWASAKI TERYX BED RAILS 0521-0629
TERYX BED RAILS
Texture powder-coated and bolt on requiring no
drilling. Made from 1” diameter tubing and 11 gauge
steel. Sold as pairs. Imported.
fits model PART #
MULE 610 SERIES - ALL YEARS
BLACK (40 oz. tonneau-tex vinyl) 0521-0282
MOSSY OAK BREAK-UP®
(500 denier cordura®
) 0521-0283
MULE 3000 SERIES
BLACK (40 oz. tonneau-tex vinyl) MUDKM104
MOSSY OAK BREAK-UP®
(500 denier cordura®
) MUDKM106
MULE 4000 SERIES 2009
BLACK (40 oz. tonneau-tex vinyl) 0521-0820
MOSSY OAK BREAK-UP®
(500 denier cordura®
) 0521-0821
KAWASAKI TERYX cab enclosure PART #
BLACK (40 oz. tonneau-tex vinyl) 0521-0633
MOSSY OAK BREAK-UP®
(500 denier cordura®
) 0521-0634
16. 30 31
OPEN CLOSED
2317-0094 2317-0094
OPEN CLOSED
2317-0093
OVERALL OVERALL
fits model WIDTH HEIGHT part#
POLARIS RANGER 09 53” 13” 2317-0076
2317-0093
OVERALL OVERALL
fits model WIDTH HEIGHT part#
POLARIS RANGER thru 00-08 (NOT SHOWN) 59” 36” 2317-0087
polARIS RANGER 09-10 53" 32" 2317-0093
polARIS RANGER 400 09 (NOT SHOWN) 46" 29 1/4" 2317-0108
polARIS RZR 08-09 37" 23" 2317-0094
replacement hood pucks (2 piece) - - 2317-0057
FULLFOLDING WINDSHIELD
Premium .177” thick clear polycarbonate shield. Centrally hinged for ventilation.
Tool-less operation. Stainless steel rubber coated mount straps.
POLARIS UTV
RANGER HALF WINDSHIELD
Premium .177” thick polycarbonate. Stainless steel rubber coated mounting clamps.
fits model part#
POLARIS RZR ROOF 0521-0864
RZR ROOF
One piece design manufactured from premium .200” thick plastic material that is
durable and weather resistant. Comes with all mounting hardware. Imported.
FITS MODEL PART #
POLARIS RANGER BACK PANEL 09-10 0521-0871
RANGER BACK PANEL
Constructed of .177" thick clear polycarbonate. Adds a finished look to your UTV
and provides an effective barrier to keep debris from entering the cab.
FITS MODEL PART #
POLARIS RZR BACK PANEL 08-10 0521-0872
RZR BACK PANEL
Constructed of .177" thick clear polycarbonate. Adds a finished look to your UTV
and provides an effective barrier to keep debris from entering the cab.
OVERALL OVERALL
fits model WIDTH HEIGHT part#
POLARIS RANGER 09 53" 29" 2317-0098
POLARIS RANGER 400 09 (NOT SHOWN) 53" 30 1/4" 2317-0109
POLARIS RZR 08-09 (NOT SHOWN) 40" 25" 2317-0101
FULLWINDSHIELD
Premium .177” thick clear polycarbonate shield. Mounts to roll bar using stainless
steel, rubber-coated mount straps.
FITS MODEL PART #
POLARIS RANGER 09 2317-0105
POLARIS RANGER 400 09 (NOT SHOWN) 2317-0106
MULTI WINDSHIELD
Split windshield design allows the rider to configure the windshield. Three
configurations (upper, lower and full). Mounts easily and can be quickly configured
without tools. Trailerable to 65 mph. Constructed from optical grade acrylic.
Comes with storage bag for storing one section at a time. Imported.
MULTI - FULL MULTI - LOWER
2317-0105 2317-0105
2317-0098
NEW PRODUCT
NEW PRODUCT
NEW PRODUCT
NEW PRODUCT
17. fits model part#
POLARIS RZR bed cooler trunk 1512-0068
32 33
fits model part#
POLARIS RANGER 09 2040-0549
POLARIS RZR 09 2040-0548
replacement lights 2040-0551
POLARIS UTV
LIGHTBARS
Tubular steel construction with a powder-coated finish. 6" - 55 watt halogen lights with a
unique radius design provide a panoramic light display. Simple clamp on design with a vehicle
specific OEM wire loom. Comes with in-dash swith and relay.
2040-0549
2040-0548
fits model PART #
polaris rzr radiator breather & guard 1904-0062
RZR RADIATOR BREATHER & GUARD
Powder coated guard bolts to the stock hood increasing air flow to the radiator.
Includes mounting hardware and cut template. Unlike other breather guards on
the market, ours has a slight horizontal bend in the center to follow the contour of
the Polaris RZR hood. Imported.
RZR BEDTRUNK COOLER
Rotational-molded plastic construction with foam-filled insulated body. Two
large wet/dry storage areas (1175 cubic inches) with drain plugs. One wet/dry
storage area (648 cubic inches) with removable lid, storage tray and drain plug.
Two gas-assist shocks hold the lid open. Two draw-tight latches keep the lid secure.
Convenient storage for separating ice and beverages from dry goods. Imported.
Contents not included.
fits model part#
POLARIS RZR OVERFENDERS 1420-0044
RZR OVERFENDERS
Constructed of 3/16” GE Lexan® polycarbonate. All stainless steel, black-coated
finish hardware. Easy to install; no drilling required. Fits snuggly between the roll
bars. Adds a finished look to your vehicle and provides an effective barrier to keep
debris from entering the cab. Imported.
18. 34 3535
POLARIS UTV
fits model PART #
POLARIS RZR
BLACK 0521-0575
Mossy Oak Break-Up®
0521-0576
fits model PART #
POLARIS RANGER 02-08
BLACK (40 oz. tonneau-tex vinyl) MUDPR-100
Mossy Oak Break-Up®
(500 denier cordura®
) MUDPR-102
POLARIS RANGER 09
BLACK (40 oz. tonneau-tex vinyl) 0521-0822
Mossy Oak Break-Up®
(500 denier cordura®
) 0521-0823
FITS MODEL PART #
POLARIS RANGER 02-08
BLACK (40 oz. tonneau-tex vinyl) MUDPR-108
Mossy Oak Break-Up®
(500 denier cordura®
) MUDPR-110
POLARIS RANGER 09
BLACK (40 oz. tonneau-tex vinyl) 0821-0826
Mossy Oak Break-Up®
(500 denier cordura®
) 0521-0827
FITS MODEL PART #
POLARIS RZR
BLACK (40 oz. tonneau-tex vinyl) 0521-0569
Mossy Oak Break-Up®
(500 denier cordura®
) 0521-0570
FITS MODEL PART #
POLARIS RZR
BLACK (40 oz. tonneau-tex vinyl) 0521-0571
Mossy Oak Break-Up®
(500 denier cordura®
) 0521-0572
CAB ENCLOSURE
Perfect for winter or rainy weather. Zippered doors for fast entry; straps keep doors
rolled up and open. Heavy acrylic windshield. Waterproof material.
CAB ENCLOSURE
Perfect for winter or rainy weather. Zippered doors for fast entry; straps keep doors
rolled up and open. Heavy acrylic windshield. Waterproof material.
ROOF COVER
Perfect for winter or rainy weather. Includes adhesive backed hook-and-loop
closure for mounting to roll cage. Waterproof material.
ROOF COVER
Perfect for winter or rainy weather. Includes adhesive backed hook-and-loop
closure for mounting to roll cage. Waterproof material.
fits model PART #
POLARIS ranger 02-08
BLACK MUDPR-112
Mossy Oak Break-Up®
MUDPR-114
POLARIS ranger 09
BLACK 0821-0995
Mossy Oak Break-Up®
0821-0996
fits model PART #
POLARIS rZR
BLACK 0821-0776
Mossy Oak Break-Up®
0821-0777
fits model PART #
POLARIS RZR
BLACK (40 oz. tonneau-tex vinyl) 0521-0573
Mossy Oak Break-Up®
(500 denier cordura®
) 0521-0574
RZR BED COVER
Includes adhesive backed hook-and-loop closure for mounting to bed rail.
Waterproof material.
RZR COWLCOVER
Made from 500-denier waterproof Cordura®. Protects the front of your RZR
from debris. Uses plastic clips and adhesive hook-and-loop closure for a no-drill
installation.
RANGER BENCH SEATCOVER
Made from 500-denier waterproof Cordura®. Protects the seat from punctures
and daily wear.
RZR SEATCOVER
Seat covers are made from 500 denier waterproof Cordura® and use elastic around
outer edge to attach under seat bottom and seat back. Seat cover offers great
protection to factory seats with easy installation and no tools needed. Mounting
items and instructions included.
19. 0521-0756
36 37
OPEN CLOSED
OVERALL OVERALL
fits model WIDTH HEIGHT part#
YAMAHA RHINO (all models) 04-10 50" 28 1/2" 2317-0097
OVERALL OVERALL
fits model WIDTH HEIGHT part#
YAMAHA RHINO (all models) 04-10 59” 13” 2317-0047
FITS MODEL PART #
YAMAHA RHINO
Diamond plate 0521-0755
stainless steel 0521-0756
0521-0755
OVERALL OVERALL
fits model WIDTH HEIGHT part#
YAMAHA RHINO (all models) 04-10 28” 50” 2317-0086
replacement hood pucks (2 piece) - - 2317-0057
YAMAHA UTV
RHINO FULLFOLDING WINDSHIELD
Premium .177” thick clear polycarbonate shield. Centrally hinged for ventilation.
Tool-less operation. Stainless steel rubber coated mount straps.
RHINO HALF WINDSHIELD
Premium .177” thick polycarbonate. Stainless steel rubber coated mounting clamps.
RHINO FULLWINDSHIELD
No holes to drill. Mounts with six composite clamps. Top and bottom supports to
add rigidity. Includes all hardware. Windshield doesn’t touch roll bar. Works with
factory roof or our roof.
RHINO DOOR PANELINSERTS
Available in both stainless steel and diamond plate. Add the custom look to your
Rhino. All necessary parts and hardware included for both doors. Fits all years
with OEM doors.
FITS MODEL PART#
YAMAHA RHINO 0521-0665
RHINO FLOORMATS
Industrial grade anti skid rubber. Raised knobs provide excellent traction and keep
your feet above water and debris. Holes in the mats provide drainage. Removable
for easy cleaning. Imported.
FITS MODEL PART #
YAMAHA RHINO 04-10 0521-0754
RHINO STAINLESS STEELTAILGATE COVER
Add some style to your Rhino with this polished stainless steel tailgate cover.
Stainless steel rivets and adhesive tape included. Imported.
FITS MODEL PART#
YAMAHA RHINO 4510-0033
RHINO SLIMLINE ROOF
Provides great protection from the elements.
Super durable, foam filled, double wall plastic construction. Stainless mounting
plates. Easily mounts to existing roll cage fasteners. Requires no drilling.FITS MODEL PART #
YAMAHA RHINO ALL MODELS 04-10 0521-0870
RHINO BACK PANEL
Constructed of .177" thick clear polycarbonate. Adds a finished look to your UTV
and provides an effective barrier to keep debris from entering the cab.
fits model PART #
yamaha rhino (all models) 04-10 2317-0104
MULTI WINDSHIELD
Split windshield design allows the rider to configure the windshield. Three
configurations (upper, lower and full). Mounts easily and can be quickly configured
without tools. Trailerable to 65 mph. Constructed from optical grade acrylic.
Comes with storage bag for storing one section at a time. Imported.
MULTI - FULL MULTI - LOWER
2317-0104 2317-0104
NEW PRODUCT
NEW PRODUCT
NEW PRODUCT
20. 38 39
YAMAHA UTV
FITS MODEL PART #
Yamaha Rhino 04-10 1420-0047
RHINO FRONT& REAR FENDER FLARES
Durable double wall L.L.D.P.E. construction. Easily mounts to fenders with
supplied stainless steel hardware. Designed to minimize flying debris from entering
the passenger compartment while adding to the rugged style of your Rhino. Sold as
set of four.
FITS MODEL PART #
YAMAHA RHINO 04-10 4510-0370
RHINO POWER WASHER KIT
Easily installs under the driver’s seat. Reservoir holds 3.75 gallons of water. Self
priming, 12V pump operates at 60psi. Mounting location provides convenient
access to power switch and brass quick-connect. Includes 8” coiled hose and durable
glass-filled nylon spray gun. Imported.
FITS MODEL PART #
YAMAHA RHINO 04-10 3502-0152
RHINO UNDERSEATDRAWER
Storage for misc. smaller items. Slides in and out on a track system and locks while
driving to stay securely in place. Imported.
21. 40 41
FITS MODEL PART #
YAMAHA RHINO 2040-0162
HALOGEN LIGHT KIT MDL011
1
SOLD AS A PAIR
fits model part#
YAMAHA RHINO 700 08-10 2040-0547
replacement light 2040-0551 fits model PART #
YAMAHA RHINO BED COOLER 1512-0059
FITS MODEL PART #
YAMAHA RHINO 1512-0060
RHINO BEDTRUNK
Includes three removable storage boxes (each measuring 12”L x 8.5”W x 12.75”H).
Removable tool trays and nylon straps with buckles to hold the lids tight. Provides
convenient weather resistant storage and easy access for separating all of your supplies.
RHINO BED COOLER
Rotational molded, plastic construction. Two large wet/dry storage areas (1825
cubic inches) with drain plugs. One wet/dry storage area (635 cubic inches) with
removable lid, storage tray and drain plug. Two gas assist shocks hold the lid
open for easy access. Two draw tight latches keep the lid secure while operating
the vehicle. Convenient storage for separating ice and beverages from dry goods.
Imported.
RHINO LIGHTBAR
Tubular steel construction with a powder-coated finish. Four, 6" - 55 watt halogen
lights with a unique radius design provide a panoramic light display. Simple
clamp- on design with a vehicle specific OEM wire loom. Comes with in-dash
switch and relay.
RHINO LIGHTBAR
1 1/2” powder coated round tubing. Holds four, 55 Watt Moose halogen lights
(sold separately).
fits model PART #
YAMAHA RHINO 0521-0606
RHINO BED RAILS
Texture powder coated bed rails bolt on requiring no drilling. Made from 1”
diameter tubing and 11 ga. steel. Fits all year and models of Rhino. Sold as pairs.
fits model PART #
YAMAHA RHINO 0530-0781 1
1
ATTACHES TO OEM BUMPER; FITS EVERY RHINO MODEL AND EVERY
YEAR EXCEPT ‘08 YAMAHA BAJA BUMPER
RHINO FRONTBUMPER GUARD
Made from .125 thick 5052 aircraft grade aluminum giving your Rhino a custom
look. Covers stock bumper. Includes mounting hardware.
FITS MODEL PART #
Yamaha RHINO QUICK DISCONNECT RADIATOR GUARDS
ALUMINUM 1904-0058 1
STEEL/BLACK POWDER COATED 1904-0059 1
1
FITS ALL YAMAHA RHINO MODELS ‘04-08
Yamaha RHINO NON-QUICK DISCONNECT RADIATOR GUARDS
ALUMINIUM 1904-0061 1
STEEL/BLACK POWDER COATED 1904-0060 1
1
FITS ALL YAMAHA RHINO MODELS ‘04-08
RHINO RADIATOR GUARDS
Made from 5052 aircraft grade aluminum which protects your expensive radiator
from sticks and debris. Rhino radiator guard mounts in front of the radiator.
The quick connect guard attaches without any tools. Quick release version allows you
to remove guard for radiator access. Fits all years and models of Yamaha Rhino.
fits model PART #
YAMAHA RHINO 0521-06071
1
WILL NOT FIT THE ‘08 700EFI
RHINO PASSENGER GRAB HANDLE
Quality construction will ensure years of reliable
service. Easy installation. Adjustable to suit passenger
size; includes grips. Imported.
RHINO BATTERYBOX
Battery tray allows you to upgrade to a high powered battery or add an additional
battery to your Rhino. Attaches to frame under your hood (to the right of your stock
battery box). Powder coated for superior protection. 9 7/8”L x 7 1/8”W x 6 1/2”H.
Includes mounting hardware.
fits model PART #
YAMAHA RHINO 450/650 04-09 1861-0374
YAMAHA RHINO 660 04-07 1861-0374
YAMAHA RHINO 700 08-09 1861-0485
RHINO EXHAUSTTIP
Made from CNC-billet aluminum. Angled exhaust
port and machined gun barrel divots on the tip. Angle
directs exhaust flow down and away from fenders and
tailgates. Comes with mounting bolts and screen.
fits model PART #
YAMAHA RHINO 04-08 0521-0632
1904-0058
1904-0059
1904-0061
1904-0060
YAMAHA UTV
FITS MODEL PART #
YAMAHA RHINO 4510-0040
RHINO UNDERDASH STEREO ASSEMBLY
Durable, foam filled, easily dash mounted. Comes with 60-watt speakers, power
antenna, and stainless steel hardware. Accommodates a wide range of waterproof
stereos selected by the user (not included).
FITS MODEL PART #
YAMAHA RHINO 4510-0039
RHINO REAR SPEAKER BAR
Durable, foam filled with stainless steel mounting plates and cover. Comes with
75-watt speakers pre-wired. Features snap-on net storage areas and easily mounts to
roll cage with no drilling.
22. 42 43
YAMAHA UTV
fits model PART #
YAMAHA RHINO CAB ENCLOSURE 04-10
BLACK (40 oz. tonneau-tex vinyl) 4510-0001
Mossy Oak Break-Up®
(500 denier cordura®
) 4510-0002
CAB ENCLOSURE for use w/ oem doors 04-10
BLACK (40 oz. tonneau-tex vinyl) 0521-0669
Mossy Oak Break-Up®
(500 denier cordura®
) 0521-0670
fits model PART #
YAMAHA RHINO 04-10
BLACK (40 oz. tonneau-tex vinyl) 4510-0005
Mossy Oak Break-Up®
(500 denier cordura®
) 4510-0006
fits model PART #
YAMAHA RHINO 04-10
Mossy Oak Break-Up®
1404-0194
fits model PART #
YAMAHA RHINO 04-10
Mossy Oak Break-Up®
4510-0010
FITS MODEL PART #
YAMAHA RHINO 04-10
BLACK 4510-0007
Mossy Oak Break-Up®
4510-0008
fits model PART #
YAMAHA RHINO 04-10
BLACK 0821-0710
Mossy Oak Break-Up®
0821-0711
RHINO BUCKETSEATCOVERS
Made from 500-denier waterproof Cordura®
. Elastic outer edge attaches covers to
seat bottom and back. Includes: one pair of seat covers and headrest covers.
RHINO NEOPRENE BUCKETSEATCOVERS
Neoprene seat covers are made of 3.0mm black neoprene insert which provides
comfort and a waterproof barrier between rider and seat. Conforms to the seat for
a tight custom fit that protects the seat from damage. Heavy elastic around edge of
seat cover makes for easy installation without the need for tools. Drain holes are
installed in seat bottom to allow liquids to escape. Includes: one pair of seat covers
and headrest covers.
RHINO CAB ENCLOSURE
Perfect for winter or rainy weather. Made from waterpoof material with
automotive grade clear, flexible acrylic windshield, doors and back window. Doors
are completely removable and have full-length double zippers. Doors can also be
rolled up and fastened.
RHINO BED COVER
Made from 500 denier waterproof Cordura®
. Tailgate can be raised and lowered
without removing cover. Easy access from all sides including the cabin by
unsnapping the self adjusting side release buckles. Lower hardware is metal and
engages holes predrilled from the factory. Reinforced webbing across top of cover for
strength. Water resistant and has the capacity to expand to a fully loaded bed.
RHINO ROOF COVER
Perfect for winter or rainy weather. Waterproof material. Fastens to cage with
adhesive backed hook-and-loop closures and heavy web straps.
RHINO COWLCOVER
Made from 500-denier waterproof Cordura®
. Uses plastic clips and adhesive hook-
and-loop closure for a no-drill installation. Protects cowl from nicks and scratches.
23. FITS MODEL PART #
KAWASAKI TRANS & POLARIS CREW CAB 0521-0880
4-PASSENGER 2-PIECE UTVROOF
Fits Kawasaki Trans and Polaris Crew Cab. Made from black ABS. All mounting
hardware and instructions included. 20 lb. weight limit.
44 45
UNIVERSAL UTV
FITS MODEL PART #
YAMAHA RHINO & KAWASAKI TERYX 0521-0867
YAMAHA RHINO/KAWASAKITERYX ROOF
Durable polyethylene w/ UV stabilizers. Extremely durable in cold weather.
Molded in cargo tray allows for extra storage with bungees or cargo net.
Fits Rhino and Teryx models. 20 lb. weight limit.
DESCRIPTION PART#
UTV OVERHEAD RACK 1512-0055
MOUNTING KITS / FITS MODELS
YAMAHA RHINO 04-10 1512-0056
POLARIS RANGER 02-10 1512-0057
DESCRIPTION PART #
UTV UNIVERSAL 2-PIECE ROOF 0521-0868
DESCRIPTION PART #
UTV BED NET 3920-0186
FITS MODEL PART #
Kawasaki teryx (all years) 0521-0759
yamaha rhino (all years & models) 0521-0760
UTVOVERHEAD RACK
Carry any additional items overhead. Overhead rack is made out of 3/4” round
steel tubing, 16 gauge circular mesh bottom steel, and finished with a wrinkle black
powder coating. 43 3/4” L x 22 1/2” W x 4 1/2” H.
UTVUNIVERSAL2-PIECE ROOF
Durable polyethylene w/ UV stabilizers. Molded water run-off area. Molded
in cargo tray allows for extra storage. Fits many vehicles including Rangers and
Honda Big Red. Measures 60" W. 20 lb. weight limit.
UTVBED NET
This 30” x 28” black bed net comes with 4 ABS plastic mounting hooks and is great
for securing misc. items in the bed of your UTV.
UTVTAILGATE BOX CAPS
Diamond plate finish. Protect your rails from scratches and dents.
Add style to your UTV.
DESCRIPTION PART #
26” LONG KIT 0521-0757
32” LONG KIT 0521-0758
EXTRA/REPLACEMENT TRACK CLIP 0521-0753
UTVTIE DOWNTRACK SYSTEM
Provides many different tie down locations to secure misc. items. Made of heavy-
duty, powder coated aluminum. Includes 2 tracks, 2 tie down clips, 8 backing plates,
8 bolts and lock nuts. Tie downs not included.
FITS MODELS Mounting location Part #
Arctic Cat Prowler Inside Rail, floor mount 0521-0757
Club Car XRT inside rail, floor mount 0521-0758
Cub Cadet Trail inside rail, floor mount 0521-0758
Honda BIG RED floor mount 0521-0757
Husqvarna HUV inside rail, floor mount 0521-0758
John Deere XUV inside rail, floor mount 0521-0758
Kawasaki Teryx inside rail, floor 0521-0757
Kawasaki Mule inside rail, floor 0521-0757
Kubota RTV inside rail, floor mount 0521-0758
Land Pride Treker inside rail, floor mount 0521-0758
Polaris Ranger floor mount 0521-0758
Yamaha Rhino inside rail 0521-0757
FITS MODEL STYLE PART #
ARCTIC CAT
PROWLER 06-10 ROLL UP 0521-0769
PROWLER 06-10 BI-FOLD 0521-0770
HONDA
BIG RED 09-10 ROLL UP 0521-0767
BIG RED 09-10 BI-FOLD 0521-0768
KAWASAKI
TERYX 08-10 ROLL UP 0521-0765
TERYX 08-10 BI-FOLD 0521-0766
POLARIS
RANGER (EXCLUDING 6X6 MODELS) 06-10 ROLL UP 0521-0763
RANGER (EXCLUDING 6X6 MODELS) 06-10 BI-FOLD 0521-0764
YAMAHA
RHINO 04-10 ROLL UP 0521-0761
RHINO 04-10 BI-FOLD 0521-0762
BI-FOLD TONNEAU COVER
UTVBI-FOLDTONNEAU COVER
The first bi-folding UTV cover. Durable, heavy-duty construction with easy
insallation. Provides more storage space for taller items in the bed. Complete bed
protection in all weather conditions. Quick access to cargo without removing the
entire cover. Folds away in seconds for full use of the bed area.
UTVROLLUPTONNEAU COVER
Heavy-duty material with a stylish design and easy installation. Rolls and stores
at the front of the bed allowing for use of the entire bed. Protects contents of your
UTV’s bed in all weather conditions.
BI-FOLD TONNEAU COVER
ROLLUP TONNEAU COVER
NEW PRODUCT
NEW PRODUCT NEW PRODUCT
24. 46 4746
UNIVERSAL UTV
DESCRIPTION PART #
expedition utv gun scabbard
BLACK 3518-0039
Mossy Oak Break-Up®
3518-0040
expedition utv gun scabbard ADD-ON
BLACK 3518-0041
Mossy Oak Break-Up®
3518-0042
DESCRIPTION PART #
UTV ROLL CAGE GUN RACK 3518-0018
DESCRIPTION PART #
UTV SPOTLIGHT 2040-0454
W/ ADD-ON
UTVSPOTLIGHT
2,000,000 candle power. 12-volt utility vehicle spotlight. Light detaches for hand
held use. Adjustment knob for 360 degree rotation. Durable housing has a built
in handle that resists weather, corrosion and chipping. Weatherproof push button
switch. Rugged bar mount and deck mount brackets. 25 feet of coil cord. 12-volt
power plug with LED indicator. Imported.
EXPEDITION UTVGUN SCABBARD
Attaches quickly to the rear roll bar of any UTV. Constructed with weatherproof
heavy gauge tarpaulin and high-denier PVC backed polyester. Lined with 1/2” of
protective closed cell foam and convenient roll up openings, allows quick access to
your weapon from either side of the vehicle. Two large exterior storage pockets and
a center pocket sized to fit all standard ammo boxes, providing plenty of room for
your shooting accessories. Dimensions: Overall 54.5” L x 11.5” H 2-front pockets
17” L x 9.25” H x 2” D 1-center pocket 6” L x 3.75” H x 1.5 D. Imported.
UTVROLLCAGE GUN RACK
Transport two firearms safely, securely and out of the way. Mounts snugly at the
back of the UTV cab. Attaches to the UTV frame and adjusts to fit all popular
brands. Can be installed, or removed in seconds. Made from aircraft aluminum and
finished with tough, powder coated paint for years of durability.
DESCRIPTION PART #
Universal Front Rack 1512-0037
MOUNTING KITS / fits model
arctic cat prowler 06-09 1512-0065
KAWASAKI TERYX 08-09 1512-0066
polaris ranger 09-10 1512-0080
POLARIS Ranger 05-08 1512-0039
YAMAHA Rhino 04-09 1512-0038
UTVFRONTRACK
3/4” powder coated round tubing. Great for hauling an extra load. The easy release
attachment allows the rack to pivot forward without having to unbolt or remove
the entire rack system. This feature allows easy access to the units hood as well as
proper clearance to open the hood. 100 lb. weight capacity.
25. 48 4949
DESCRIPTION PART #
UTV ENTRY ASSIST HANDLES 4510-0051
UTV fire extinguisher holder PART #
Black 4050-0025
Mossy Oak Break-Up®
4050-0026
DESCRIPTION PART #
1.75" diameter rollbar 0640-0386
arctic cat prowler square rollbar 0640-0518
DESCRIPTION PART #
UTV LED MAP LIGHT 2040-0489
UTV Roll bar 6-pk Cooler PART #
Black 3511-0006
Mossy Oak Break-Up®
3511-0007
FITS MODEL PART #
ARCTIC CAT PROWLER 08-10 0521-0842
KAWASAKI TERYX 08-10 0521-0843
POLARIS RANGER XP 10 0521-0842
POLARIS RZR 08-10 0521-0842
YAMAHA RHINO ALL MODELS 07-10 0521-0842
FITS MODEL PART #
KAWASAKI TERYX 08-10 0521-0831
YAMAHA RHINO ALL MODELS 07-10 0521-0831
UTVINSIDE/OUTSIDE REARVIEW MIRROR
Roll bar mounted rear view mirror for all models of
UTV’s. Can be mounted inside or outside of cab with a
simple clamp. Imported.
DESCRIPTION PART #
UTV rear view mirror 0640-0517
UTVREARVIEW MIRROR
Large viewing surface. Adjustable viewing angles.
Automotive styling. High impact plastic housing. Cast
alloy arm. Mounts to 1.75" diameter rollbar. Imported.
UTV rear view mirror PART #
SILVER 0640-0515
BLACK 0640-0516
UTVSIDEVIEW MIRRORS
Large viewing surface. Adjustable viewing angles.
Automotive styling. Mounts to 1.75" diameter roll bar.
Both left and right side included. Imported.
UTVLED MAP LIGHT
This waterproof LED light fits most roll cages that are
1 1/2” to 1 13/16” in diameter. Batteries are included.
Imported.
UTVENTRYASSISTHANDLES
Entry assist handles attach to all utility vehicles with
up to 4” roll bars. Assists in entry and exit of your
utility vehicle. Sold in pairs. Imported.
UTVFIRE EXTINGUISHER HOLDER
Thick padding with twin straps fastens to roll cage
of UTV. Drawstring top with cord lock secures fire
extinguisher in place for mounting in any direction.
Also fastens to tubular racks on ATV’s. For use
with most household or shop fire extinguishers. Fire
extinguisher not included.
UTVROLLBAR 6-PK COOLER
Thick padding with twin straps fastens to roll cage of
UTV. Also can fasten to tubular racks on ATV’s. Made
to hold six 12 oz. cans. Imported.
UTVBILLETKEYNUTCOVER
Customize and add style to your UTV. CNC machined
from billet aluminum.
UTVBILLETLIGHTSWITCH
Customize your UTV. CNC machined from billet
aluminum. Replace stock switch with a polished piece.
UNIVERSAL UTV
BUMPER
FITS MODEL WIDTH PART #
ARCTIC CAT PROWLER 06-09 53” 0530-0666
YAMAHA Rhino 450/660/700 06-09 48” 0530-0418
BUMPER
FITS MODEL WIDTH PART #
kawasaki mule 3000/3010 all years 52” 0530-0778 1
kawasaki mule 4010 09 52” 0530-0778
KAWASAKI Mule 550/600/610 all years 46 1/2” 0530-0779 1
POLARIS Ranger 05-09 (not for rzr) 58 3/4” 0530-0780 2
YAMAHA Rhino 06-09 (all 450, 660, 700) 49” 0530-0777 3
1
STOCK TAILLIGHTS MOUNT INSIDE BUMPER FOR PROTECTION
2
6X6 MODELS WILL REQUIRE DRILLING TWO HOLES
3
TWO HOLES MUST BE DRILLED UNDER RHINO BED MAT
DESCRIPTION PART #
UTV cover 4002-0008
UTVREARTUBE BUMPER
2 1/2” powder coated round steel tube. Great for rear protection. Allows for
opening the tailgate when installed.
UTVREAR BUMPER
Mounting brackets are made from 3/16” thick steel and bumper is made from 10
gauge steel. Powder coated gloss black for superior protection.
UTVCOVER
Made from strong, urethane coated black
nylon. Water-resistant. Made to fit all
utility vehicles. Measures 120” L X 65” W
X 76” H.
FITS MODEL PART #
ARCTIC CAT
PROWLER ALL MODELS 08-09 2001-0463
KAWASAKI
TERYX 08-09 2001-0464
POLARIS
RANGER XP 09 2001-0462
RZR 08-09 2001-0462
YAMAHA
RHINO 700 ALL MODELS 07-09 2001-0461
UTVH.I.D. LIGHTKITS
Factory direct replacement headlight kits for UTVs. Lights plug directly into the
factory headlight housings, producing 6 times more light than factory headlights.
H.I.D. provides more light output at a reduced amperage draw. 23,000 volt system
with 5.6 amp total draw. No impact on the OEM charging system. Super white
8000k color temperature. Mounting ballasts are required.
DESCRIPTION PART #
UTV CAB HEATER 4510-0323
UTVCAB HEATER
Stay warm with a 12V/300 watt heater for your UTV. Features a 3 position
switch from heat to fan only. Top knob rotates to adjust fan speed. Positive cable is
fused. Adjustable fan speeds. Swivel stand allows airflow to be re-directed. Unit
draws 19 amps. Imported.
UTVBEDTRUNK
Keep your gear secure and dry. Prevents items from bouncing around in UTV bed.
Easy installation. Universal fit for any UTV bed.
DESCRIPTION PART #
UTV BED TRUNK 1512-0100
NEW PRODUCT
NEW PRODUCT NEW PRODUCT
27. 52 53
fits model part #
drop rack
ARCTIC CAT
250 2x4 99-01 1512-0082
300 2x4/4x4 96-05 1512-0082
375 4x4 Automatic 02 1512-0082
400 4x4 (All except TRV/TBX) 00-08 1512-0082
454 2x4/4x4 Bearcat 96-98 1512-0082
500 4x4 (All except TRV/TBX) 00-09 1512-0082
650 4x4 V2/H1 04-08 (Will not fit LE) 1512-0082
700 4x4 (Including Mud Pro) 08-10 1512-0082
BOMBARDIER
Traxter Max 500 4x4 04 1512-0082
Traxter 500 03 1512-0082
Traxter XT/XL 500 03 1512-0082
Quest XT650 4x4 02-03 1512-0082
HONDA
TRX250 Recon 97-07 1512-0082
TRX300 2x4/4x4 93-00 1512-0082
TRX350/S Rancher 2x4/4x4 01-05 1512-0082
TRX400 Foreman 4x4 95-01 1512-0082
TRX400 Rancher 4x4 04-06 (all) 1512-0082
TRX420 Rancher 4x4 07-10 1512-0082
TRX450S/ES 4x4 98-03 1512-0082
TRX500 Rubicon 01-04 1512-0082
TRX500 Foreman/Rubicon 05-09 1512-0081
TRX650 Rincon 03-06 1512-0081
TRX680 Rincon 07-10 1512-0081
JOHN DEERE
500 Trail Buck 4x4 05 1512-0082
650 Trail Buck 4x4 05 1512-0082
KAWASAKI
KLF220 Bayou 88-00 1512-0081
KLF300 Bayou 2x4/4x4 89-01 1512-0082
KVF300 Prairie 2x4/4x4 99-02 1512-0081
KVF360 Prairie 2x4/4x4 02-03 1512-0082
KVF360 Prairie 4x4 04-05 1512-0081
KVF400 Prairie 2x4 97-99/4x4 97-98 1512-0081
KVF400 Prairie 4x4 99-02 1512-0081
KVF650 Prairie 4x4 02-03 1512-0082
KVF650 Brute Force 4x4 05-09 1512-0081
KVF700 Prairie 4x4 04-06 1512-0081
KVF750 Brute Force 4x4 05-09 1512-0081
fits model part #
drop rack (con't)
POLARIS
All plastic rear rack models 96-09 1512-0081
250 Xplorer 4x4 00-01 1512-0081
300 2x4/4x4 94-95 1512-0081
300 Xplorer 4x4 96-99 1512-0081
300 Xpress 98-99 1512-0081
325 Magnum 4x4 00-01 1512-0081
335 Sportsman 99-01 1512-0081
350L 2x4/4x4 92-93 1512-0081
400 Sportsman 01 1512-0081
400 Xplorer 4x4 95-01 1512-0081
400L 2x4/4x4 94-95 1512-0081
425 Magnum 2x4/4x4 95-98 1512-0081
455 Diesel 99-00 1512-0081
500 Magnum 99-00 1512-0081
SUZUKI
LTF250 Quad Runner 99-01 1512-0082
LTF250 Ozark 02-04 1512-0082
LTF300 King Quad 99-02 1512-0082
LT400 Eiger 02-07 1512-0082
LT400 King Quad 08-09 1512-0081
LT450 King Quad 07-09 1512-0081
LT-F500F Quad Runner 4x4 98-02 1512-0082
LT-A500 Quad Master 4z4 00-01 1512-0082
LT500 Vinson 02-07 1512-0081
LT500 King Quad 09 1512-0081
LT700 King Quad 05-07 1512-0081
LT700 Twin Peaks 04-05 1512-0081
LT750 King Quad 08-09 1512-0081
YAMAHA
YFM250 BearTracker 2x4 99-02 1512-0082
YFM350FW Big Bear 4x4 87-96 1512-0082
YFM350 Big Bear 2x4/4x4 97-99 1512-0082
YFM350 Bruin Auto 4x4 04-05 1512-0082
YFM350 Grizzly 07-09 1512-0082
YFM400 Big Bear 4x4 00-09 1512-0082
YFM400 Kodiak 4x4 96-05 1512-0082
YFM450 Kodiak Ultramatic 4x4 03-06 1512-0082
YFM450 Grizzly 07-09 1512-0082
YFM550 Grizzly 09 1512-0082
YFM600 Grizzly 98-01 1512-0082
YFM660 Grizzly 02-08 1512-0082
YFM700 Grizzly 07-10 1512-0082
NOTE: Never exceed manufacturers recommended weight capacity limits.
DROP RACK
Brand new design has a univesal fit for all ATV's. Strong yet light formed floor
can withstand extreme abuse. Square steel framework wrapped in patterned sheet
metal is tough and good looking. Black textured, powder-coated finish. Holds three
five gallon buckets with room to spare. Incorporates an easy to use tailgate to make
loading/unloading easier. Simple j-hook installation hardware works on most steel
and plastic OEM racks. Install or remove in secounds without any tools. 41" W x
14" L x 11.56" D dimensions. Long back drop rack (1512-0082) mounting surface
is 41" W x 12" L. Short back drop rack (1512-0081) mounting surface is 41" W x
9.75" L. Some assembly required.
RACK EXTENSIONS
Unique, adjustable width feature with spring locking buttons. Industry first
adjustable corner angle (up to 30 degrees) fits almost any ATV rack. Strong steel
tubular construction with lasered steel support plates. Easy to install universal
mounting hardware works on most tubular or plastic OEM racks. Heavy-duty
knobs allow you to add or remove extensions in seconds without tools. Black
textured, powder-coated finish.
1512-0076 straight front extension is 30"-37" W x 10.5" L x 5" H.
1512-0077 angled front extension is 30"-37" W x 13" L x 5" H.
1512-0078 angled front extension is 35"-41" W x 12" L x 8" H.
1512-0079 rear extension is 35"-41" W x 17" L x 8" H.
FITS MODEL FRONT PART # REAR PART #
Rack Extensions
ARCTIC CAT
250 2x4 & 4x4 01 - 1512-0079
300 4x4 04 - 1512-0079
300 4x4 05 - 1512-0079
366 4x4 08-09 1512-0077 1512-0079
400 4x4 (ALL) 08 1512-0077 1512-0079
400 4x4 (MRP) 04 - 1512-0079
400 4x4 ACT Automatic 05 1512-0076 1512-0079
400i 4x4 (MRP) 05 - 1512-0079
454 4x4 96-98 - 1512-0079
500 4x4 08-09 1512-0077 1512-0079
500 4x4 99-01 - 1512-0079
650 4X4 Automatic 04 - 1512-0079
650 4X4 Automatic LE 04 1512-0076 -
650 4x4 H-1 07-08 1512-0077 1512-0079
650 4x4 H-1 TRV 08 1512-0077 -
700 4x4 08-09 1512-0077 1512-0079
700 4x4 H-1 TRV 08 1512-0077 -
700 4x4 TRV 08 1512-0077 -
1000 Thundercat 08 1512-0077 1512-0079
CAN-AM
Outlander 400 06-09 1512-0077 1512-0078
Outlander 500 07-09 1512-0077 1512-0078
Outlander 650 06-09 1512-0077 1512-0078
Outlander 800 06-09 1512-0077 1512-0078
HONDA
TRX250 2x4 Recon 97-07 1512-0076 1512-0079
TRX300 2x4 & 4x4 88-00 - 1512-0079
TRX350 2x4 & 4x4 Rancher 00-06 1512-0076 1512-0079
TRX400 4x4 95-01 - 1512-0079
TRX400 Rancher (ALL) 04-07 1512-0076 1512-0079
TRX420 Rancher (ALL) 07-10 1512-0076 1512-0079
TRX450 4x4 S/ES 98-04 1512-0076 1512-0079
TRX500 Foreman/Rubicon 01-04 1512-0076 1512-0079
TRX500 Foreman/Rubicon (ALL) 05-09 1512-0076 1512-0079
TRX650/680 Rincon 03-09 1512-0076 1512-0079
FITS MODEL FRONT PART # REAR PART #
Rack Extensions (con't)
KAWASAKI
KLF250 Bayou 2x4 05 - 1512-0079
KLF300 Bayou 88-02 - 1512-0079
KVF300 Prairie 2x4 01 - 1512-0079
KVF360 Prairie 02-08 1512-0076 1512-0079
KVF400 Prairie 4x4 97-98 - 1512-0079
KVF650 Prairie 4x4 03 - 1512-0079
KVF650 Brute Force 06-07 1512-0077 1512-0078
KVF750 Brute Force 05-07 1512-0077 1512-0078
KVF750 Brute Force 08-09 1512-0077 1512-0079
KYMCO
500 MXU 4x4 07 - 1512-0079
POLARIS
All Plastic Rack Models (Except XP) 05-09 N/A 1512-0079
All Plastic Rack Models 96-04 1512-0077 1512-0079
250 Trail Boss 88-99 1512-0076 -
300 Magnum 4x4 94-95 1512-0076 -
400 Sportsman 94-97 1512-0076 -
400L 2x4 & 4x4 90-93 1512-0076 -
SUZUKI
LT250 Ozark 2x4 03-06 1512-0076 1512-0076
LT250 Ozark 2x4 99-01 - 1512-0079
LTF250 Quadrunner 2x4/4x4 87-01 1512-0076 1512-0079
LT300 King Quad 4x4 03-06 - 1512-0076
LT300 King Quad 4x4 91-02 1512-0076 1512-0079
LT400 Eiger 4x4 99-07 1512-0076 1512-0079
LT400 King Quad 08-09 1512-0076 1512-0079
LT450 King Quad 07-09 1512-0076 1512-0079
LT500 Quadmaster 4x4 98-01 1512-0076 1512-0079
LT500 Quadrunner 4x4 02-03 1512-0076 1512-0079
LT500 Vinson 4x4 02-06 1512-0077 1512-0079
LT700 Twin Peaks 04-05 1512-0077 1512-0078
LT700 King Quad 05-07 1512-0077 1512-0079
LT750 King Quad 08-09 1512-0076 1512-0079
YAMAHA
YFM250 Bear Tracker 99-04 1512-0076 1512-0079
YFM250 Bruin 96-00 - 1512-0079
YFM350 Big Bear 99-06 1512-0076 1512-0079
YFM350 Bruin 4x4 04-06 1512-0076 1512-0079
YFM350 Grizzly 4x4 07-09 1512-0076 1512-0079
YFM350 Wolverine 87-99 - 1512-0079
YFM400 Big Bear 00-09 1512-0076 1512-0079
YFM400 Grizzly 07 1512-0076 1512-0079
YFM400 Kodiak 93-08 1512-0076 1512-0079
YFM450 Grizzly 07-09 1512-0076 1512-0079
YFM450 Kodiak 03-06 1512-0076 1512-0079
YFM550 Grizzly 09 1512-0076 1512-0079
YFM600 Grizzly 98-01 - 1512-0079
YFM660 Grizzly 02-08 1512-0076 1512-0079
YFM700 Grizzly 07-10 1512-0076 1512-0079
NOTE: Never exceed manufacturers recommended weight capacity limits.
TAILGATE OPEN
FRONT REAR
TAILGATE CLOSED
NEW PRODUCT
NEW PRODUCT
28. DESCRIPTION PART #
ICE AUGER CARRIER 1512-0099
54 55
fits model FRONT PART # REAR PART #
STEEL MESH FRONT AND REAR RACKS
arctic cat
250/300/400 00-06 MUD5036 MUD5016
500 01-06 MUD5036 MUD5016
650 04-06 MUD5036 MUD5016
700 06-07 MUD5036 MUD5016
BOMBARDIER
TRAXTER 99-02 - MUD5016
TRAXTER 03 - MUD5016
TRAXTER XT 03 - MUD5016
RALLY 05-06 MUD5036 MUD5016
HONDA
TRX250 RECON 97-09 MUD5036 MUD5016
TRX300 93-00 1512-0029 -
TRX350 RANCHER 00-05 1512-0029 MUD5016
TRX400 FOREMAN 95-04 1512-0029 MUD5016
TRX400 RANCHER AT 400 04-06 1512-0029 MUD5016
TRX420 RANCHER 07-09 1512-0029 MUD5016
TRX450 FOREMAN 98-04 1512-0029 MUD5016
TRX500 RUBICON 01-04 1512-0029 MUD5016
TRX500 RUBICON 05-09 1512-0029 1512-0030
TRX500 FOREMAN 05-09 1512-0029 1512-0030
TRX650/680 RINCON 03-09 MUD5036 MUD5016
KAWASAKI
BAYOU 250 03 1512-0029 1512-0030
BAYOU 300 96-97 1512-0029 MUD5016
BAYOU 300 98-99 1512-0029 MUD5016
KVF300 PRAIRIE 2X4 99-02 1512-0029 1512-0030
KVF300 PRAIRIE 4X4 99-02 1512-0029 1512-0030
KVF360 PRAIRIE 03-06 1512-0029 MUD5016
BAYOU 400 96-99 1512-0029 MUD5016
KVF400 PRAIRIE 97-02 1512-0029 1512-0030
KVF400 PRAIRIE 4X4 99-02 1512-0029 1512-0030
KVF650 PRAIRIE 03 MUD5036 MUD5016
650 BRUTE FORCE 05-06 1512-0029 MUD5016
KVF700 PRAIRIE 4X4 04-05 1512-0029 MUD5016
750 BRUTE FORCE 05-09 MUD5036 MUD5016
fits model FRONT PART # REAR PART #
STEEL MESH FRONT AND REAR RACKS (con’t)
POLARIS
MAGNUM 325 01-02 MUD5036 1512-0030
XPEDITION 325 01-02 MUD5036 1512-0030
TRAIL BOSS 330 03-04 MUD5036 1512-0030
MAGNUM 330 03 MUD5036 1512-0030
MAGNUM 330 04-05 - 1512-0030
XPLORER 400 01-02 MUD5036 1512-0030
SPORTSMAN 400 01-03 MUD5036 1512-0030
SPORTSMAN 400 04 1512-0009 -
XPEDITION 425 01-02 MUD5036 1512-0030
MAGNUM 500 01-02 MUD5036 1512-0030
SPORTSMAN 500 01-03 MUD5036 1512-0030
SPORTSMAN 500 04 1512-0009 -
SPORTSMAN 600 03 MUD5036 1512-0030
SPORTSMAN 600 04 1512-0009 -
SPORTSMAN 700 03 MUD5036 1512-0030
SPORTSMAN 700 04 1512-0009 -
DIESEL 4X4 01-02 MUD5036 1512-0030
SUZUKI
OZARK 250 99-06 MUD5036 MUD5016
LTF250F 90-98 MUD5036 -
LTF300F KING QUAD 91-98 MUD5036 -
LT400 EIGER 02-06 MUD5036 MUD5016
LT4WD 90-98 MUD5036 -
VINSON 500 02-06 MUD5036 MUD5016
LTF500 QUAD RUNNER 98-02 MUD5036 MUD5016
TWIN PEAKS 700 04-05 1512-0029 MUD5016
KING QUAD 700 05-08 MUD5036 MUD5016
YAMAHA
BRUIN 250 04-06 MUD5036 MUD5016
YFM250 BEAR TRACKER 98-04 MUD5036 MUD5016
TIMBERWOLF 96-01 MUD5036 -
BRUIN 350 04-06 MUD5036 MUD5016
YFM350 BIG BEAR 96 MUD5036 -
YFM350 BIG BEAR 97 MUD5036 MUD5016
YFM350 BIG BEAR 98-99 MUD5036 MUD5016
YFM400 BIG BEAR 00-04 MUD5036 MUD5016
YFM400 KODIAK 96-06 MUD5036 MUD5016
YFM600/660 GRIZZLY 98-06 MUD5036 MUD5016
YFM700 GRIZZLY 07-09 MUD5036 MUD5016
NOTE: Never exceed manufacturers recommended weight capacity limits.
FRONT
REAR
STEELMESH FRONT& REAR RACKS
Increase your hauling capacity by mounting a rugged, durable rack over your
existing OEM rack. Constructed of heavy-duty 3/4” square steel tube frame,
covered by 16-gauge 1/2” metal meshing. Front and rear racks are powder coated.
Mounting hardware is included. Front rack dimensions measure 36” L x 15 1/2”
W x 5 x 1/2” D. Rear rack dimensions measure 41” L x 28” W x 5 1/2” D.
DESCRIPTION PART #
BACK REST 3550-0086
BACK REST
Framed from aircraft aluminum and the 2” thick cushioned back is covered with
high-density, waterproof, 400 denier nylon. Attaches to ATV rear cargo racks with
u-bolts. Convenient adjustment feature to set the backrest at the desired position
and angle. Folds flat for safe transport.
DESCRIPTION PART #
bucket holder 1512-0052
DESCRIPTION PART #
2 gal. gas can carrier MUD4713
polaris comp. rack bracket (98-04) MUD4674
GAS CAN CARRIER
Fits on front or rear tubular metal ATV racks. Holds
Wedco gas cans; not included. Inside dimensions
12 1/4" x 8. Not for Honda Rincon.
BUCKETHOLDER
Constructed of powder-coated steel. Fits most 5-gallon
buckets. Attaches securely to the rack on your ATV.
Bucket not included. Imported.
CHAINSAW HOLDER
The most versatile hainsaw holder on the market. Does
not use rack space. Heavy-duty powder coated steel
construction. Multi angle mounting. Equipped with a
premium bar guard for maximum safety. Holds any
model chainsaw with up to a 24” bar.
Chainsaw not included.
VERTICAL TOOLHOLDER
Tool can be carried either horizontal or vertical. Carries
shovels, rakes, hoes, and any other handled tools on your
ATV. Shovel not included. Imported.
ICE AUGER CARRIER
Fully adjustable and easy to use, this carrier mounts to the ATVs rack to keep the ice auger from rolling
around and protect the blade's edge and the finish on your rack. Designed to transport safely and conveniently
gas powered ice augers with up to 10" diameter blades. Includes all mounting hardware. Auger not included.
TOOLHOLDER
Securely holds all tools and other gear with standard 1 ¼” inch diameter handles. Carries garden and ranch
tools, fishing rods, and more. Shovel not included. Imported.
DESCRIPTION PART #
Tree stand carrier MUDTS4
TREE STAND CARRIER
Tension system with coated arms, grips and protects your
stand. Carrier includes a drilled hole for an additional
bungee strap for extra support. Tree stand not included.
DESCRIPTION PART #
chainsaw holder 1512-0075
DESCRIPTION PART #
VERTICAL TOOL HOLDER 1512-0047
DESCRIPTION PART #
TOOL HOLDER 1512-0046
NEW PRODUCT
29. 56 57
DESCRIPTION PART #
7’ NOZZLE 140” Boom kit 4503-0051
7’ NOZZLE BOOM KIT
7’ Nozzle Boom. 140” coverage. 3 section folding boom. Includes fittings to connect
to most spot sprayers. Boom is equipped with no drip diaphragm check valve
nozzles. Will not work with the 15 gallon 1 GPM model.
DESCRIPTION PART #
5’ NOZZLE 100” Boom kit 4503-0050
5’ NOZZLE BOOM KIT
5’ Nozzle Boom. 100” coverage. Fold behind boom. Includes fittings to
connect to most spot sprayers. Boom is equipped with no drip diaphragm
check valve nozzles. Will not work with the 15 gallon 1 GPM model.
DESCRIPTION PART #
15 gallon 1.0 GPM spot sprayer 4503-0047
DESCRIPTION PART #
25 gallon 2.1 GPM spot sprayer 4503-0048
25 gallon DELUXE 3.8 GPM spot sprayer 4503-0049
DESCRIPTION PART #
REPLACEMENT SPRAYER PUMP
1.0 gpm High Flo 4503-0053
2.1 gpm High Flo 4503-0054
3.8 gpm High Flo 4503-0055
REPLACEMENT SPRAYER HANDGUN 4503-0056
15 GALLON SPOTSPRAYER (NO BOOM AVAILABLE)
1.0 GPM High-Flo pump. 35 psi. Corrosion resistant polyethylene tank.
Full drain out capability with molded in drain port, cap and tether. 5” fill
lid with tether. Full length drain sump. Larger hose wrap horns for storage.
Both gallon and liter fluid volume indicator on tank. Molded wand clips.
On/Off switch, fuse, 96” lead wire with quick disconnect included. Solid
suction tube. Standard 18” handwand with adjustable pattern tip and 15’
hose. No booms are available for this model. Must use straps / tie-downs
Straps / tie-downs not included.
25 GALLON SPOTSPRAYER
2.1 GPM High-Flo pump. 60 psi. Corrosion resistant polyethylene tank.
Full drain out capability with molded in drain port, cap and tether. 5” fill
lid with tether. Full length drain sump. Larger hose wrap horns for storage.
Both gallon and liter fluid volume indicator on tank. Molded wand clips.
On/Off switch, fuse, 96” lead wire with quick disconnect included. Solid
suction tube. Pistol grip handwand with adjustable pattern tip and 15’
hose. Must use straps / tie-downs. Straps / tie-downs not included.
25 GALLON DELUXE SPOTSPRAYER
3.8 GPM High-Flo pump. 45 psi. “Y” valve for adjustable pressure and a
glycerin filled pressure gauge. Corrosion resistant polyethylene tank. Lower
tank profile for improved stability. Full drain out capability with molded
in drain port, cap and tether. 5” fill lid with tether. Full length drain sump.
Larger hose wrap horns for storage. Both gallon and liter fluid volume
indicator on tank. Molded wand clips. On/Off switch, fuse, 96” lead wire
with quick disconnect included. Solid suction tube. Pistol grip handwand
with adjustable pattern tip and 15’ hose. Must use straps / tie-downs.
Straps / tie-downs not included.
DESCRIPTION PART #
3’ NOZZLE “BOOMLESS” KIT 4503-0052
3’ NOZZLE “BOOMLESS” KIT
3’ Nozzle Boom. Full 30’ of spray coverage. Specially designed nozzles each
have individual shut off ’s, and check valves, includes fittings to connect to
most sprayers. Will only work with the 25 Gal 3.8 sprayer systems. Nozzles
can be adjusted to spray right, left, center or all three. Nozzles can also be
adjusted up or down depending on spray needs.
NEW PRODUCT
NEW PRODUCT
NEW PRODUCT
NEW PRODUCT
30. 58 59
DESCRIPTION PART #
Quick release chainsaw holder 1512-0017
DESCRIPTION PART #
Quick release guncase holder 1512-0016
DESCRIPTION PART #
Quick release mount 1512-0011
DESCRIPTION PART #
Quick release extension tube 1512-0012
DESCRIPTION PART #
Quick release 5-gal. bucket holder 1512-0015
QUICK RELEASE MOUNT
Mount uses a receiver-style system to attach many
accessories to your ATV. Utilizes more of your ATV’s
rack space. Constructed of 7-gauge steel. 1” square
tubing used for receiver plugs. Not for composite racks.
QUICK RELEASE EXTENSIONTUBE
Mounts into the receiver and extends the accessories
away from your ATV.
QUICK RELEASE 5-GALLON BUCKETHOLDER
Holds any 5-gallon bucket with a 12” diameter top.
Great for ice anglers. Bucket not included. (Requires
the purchase of one quick release mount)
QUICK RELEASE CHAINSAW HOLDER
Designed to hold any type of chainsaw. Chainsaw not
included. (Requires the purchase of one quick release
mount)
QUICK RELEASE GUN CASE HOLDER
Designed to hold a soft or hard gun case. Adjustable to
fit any case. (Requires the purchase of one quick release
mount)
ATVSPREADER
Spreads everything from salt, sand, seed to fertilizer. 100 lb. hopper with an adjustable feed gate to control output.
Adjustable speed controls distance. Strong fortified shields and an even flow hopper design, increase an even spread.
DESCRIPTION PART #
gun boot with bracket 3518-0022
GUN BOOTWITH BRACKET
Includes a removable, shock absorbing foam and nylon impact liner that provides
interior protection within the hard case. The hard case has an ergonomically
designed handle for carrying and molded attachment points for a sling. Designed
to accommodate left and right hand bolt action rifles and shotguns providing ample
room for 50mm scopes and rifles with slings. Gun boot mounts quickly into the all-
metal, rubber-coated loop bracket along with a locking pin. Bracket can be adjusted
to multiple angle positions between 0º and 45º. Compact design of the bracket
provides univesal fitment to most ATV racks leaving room for other items.
DESCRIPTION PART #
atv spreader 4503-0033
replacement motor 4503-0046
NOTE: Never exceed manufacturers recommended weight
capacity limits.