Planning to buy an awesome energy-efficient LED Bulb? This presentation will arm you with everything you need to know before visiting your favorite store. You will find more great stuff LEDs can offer. If you're interested to learn more about green renewable energy, you can find us at www.reelcaribbeanenergy.com/
Unlocking the Power of ChatGPT and AI in Testing - A Real-World Look, present...
6 things to Know Before Buying LED Lightbulbs
1. 6 THINGS YOU NEED TO
KNOW BEFORE BUYING
LED LIGHT BULBS
www.reelcaribbeanenergy.com
2. Though LED light bulbs are more expensive up front, in the long run, they’ll pay
for themselves within a few months with the savings on your utility bills.
Despite the cost, now’s the right time to switch to LEDs. These bulbs have
made significant advances over the last few years, finally delivering the warm
light incandescent have comforted us with for decades.
More than ever, there is also an overwhelming number of LED varieties, and
choosing an LED is entirely different from picking up an incandescent.
4. You’re probably used to shopping for light bulbs in watts, with watts
determining the brightness of the bulb. The brightness of LEDs,
however, is determined a little differently.
Actually, wattage isn’t an indication of brightness. It’s a measurement of
how much energy a bulb is drawing. So an LED would draw less than an
incandescent.
For example, an LED bulb with comparable brightness to a 60-watt
incandescent is only 8 to 12 watts.
So forget about watts here. The measurement for LED bulbs is lumens.
This is the brightness of the bulb. An incandescent can draw up to five
times as many watts for the same number of lumens. To shine at 800
lumens (lm), you’d use the 60-watt incandescent or a 8-12 watt LED.
1. It’s Not About Watts
5. 2. LEDs Are Colorful
LED bulbs are capable of displaying an impressive color range, from
purple to red, to a spectrum of whites and yellows. For the home,
however, you’re likely looking for something similar to the light that
incandescent produce.
The popular colors available for LEDs are “warm white” or “soft white”
and “bright white.”
Warm white and soft white will produce a yellow hue, close to
incandescent, while bulbs labeled as bright white will produce a whiter
light, closer to daylight and similar to what you see in retail stores.
Light color (also known as color temperature) is measured in kelvins.
Your typical incandescent is somewhere between 2,700 and 3,500K. So
this is what you’d look for when shopping for LEDs.
6. Think of switching to LED lights as an investment. LED light bulbs
have been coming down in price over the years, but they are still
priced higher than normal bulbs.
However, over time, your investment in the LED light bulbs are
going to pay off. Within a few months, your energy bill will have
reduced enough to save what you spent on the bulbs. You’ll notice
less heat production from the new LED bulbs, longer bulb life and
other LED benefits. In order to see the benefits, though, you’ll need
to replace all the bulbs in your house…not just one or two.
3. With Your Investment, You Start Saving
7. 4. Dimming Options
Most dimmer lights are designed to work with incandescents, and they
work by reducing the amount of electricity sent to the bulb. Since
there’s no direct correlation between LED brightness and energy being
drawn…you have to consider what to do if you are replacing a dimmer
light bulb.
You can either find an LED bulb that’s compatible with a traditional
dimmer, or replace your current dimming switch to make it LED-
compatible. You can usually see on the bulb packaging label whether it
is capable of dimming.
8. While LED lightbulbs are much cooler than traditional incandescents,
they still produce heat. The heat from the bulb is pulled away with a
heat sink in the base of the bulb. It then dissipates into the air.
If an LED bulb doesn’t have anywhere for the heat to go, it will die
quicker. Be sure not to put your LED bulb in an enclosed fixture. Or look
for LEDs that are approved for enclosed spaces.
5. Keep ‘em cool
9. 6. Stay in Shape
Because of the heat sinks, many LED bulbs have a metal fin at the
bottom. This makes the lightbulb have a shape that only an engineer
could love.
If your light fixture is in an obviously visible location, you’ll want to
consider the shape of your new bulb. The latest LED bulb styles now
offer omni-directional light, meaning they give off light from multiple
directions instead of only from the top.
Original designs of bulbs came in a “snow cone shape” and only
offered light from the top. So be sure to consider what shape and
direction the light will come from your bulb.
10. For more information about the benefits of LED,
or to explore lighting for your business, visit
www.reelcaribbeanenergy.com