Hongdefa will give you a detailed description of the specifications and functions of Plansifter

1. Plansifter Introduction
Representation of Plansifter: FSFG□×□/□ Where F is the professional code-Flour
Milling Machinery,SF is the variety code-Sieve machine,G is the type code-Plansifter,□×□
/□ is the main specification-Number of sieves×Rated sieves per bin/Screen size
MM,such as FSFG6×24/640，FSFG6×24/740。
1. Working principle: The sieve body and the center of gravity eccentric
system are used for rotary motion, and the generated inertial force drives
the powder and granular materials to produce a balanced flow in the plane,
so that the materials are automatically classified.
2. Purpose of use: It is to classify the material after grinding, so that
materials of different particle levels are sent to the machines behind
Performance
parameter
type
Number of
warehouses
required
(mm)
Screen
size
Number of
cells per
warehouse
Screening
area
(m×m)
Spindle
revolution
(rpm)
Rotation
diameter
(mm)
Total
Weight
(kg)
Motor
Power
(kw)
Effective
loading
height
(mm)
FSFG4×24 4 640×640 18~28 21.0~38.2 240 60~65 2750 4 2100
FSFG6×24 6 640×640 18~28 31.6~57.3 240 60~65 3700 5.5 2100
FSFG8×24 8 640×640 18~28 42.1~76.4 240 60~65 4700 7.5 2100
FSFG4×28 4 640×640 20~30 23.3~41.0 240 60~65 3000 4 2260
FSFG6×28 6 640×640 20~30 35.1~62.8 240 60~65 4000 5.5 2260
FSFG8×28 8 640×640 20~30 46.7~83.7 240 60~65 5100 7.5 2260

2. for further grinding and crushing, and the flour that has reached the
particle size requirements of the finished product is collected or sent
separately to other machinery and equipment for final processing or
directly packaged. If the materials in the grinding products cannot be
put forward in time, the subsequent equipment load will increase, the
output will be reduced, the power consumption will increase, and the
grinding efficiency will decrease; at the same time, if the various types
of products in the grinding products are not classified, the subsequent
System flow distribution is unbalanced.
3. System composition,
Plansifter is mainly composed of a feeding device, a pressing device, a
top grid, a screen box, a frame, a transmission mechanism, a beam, a screen
door and a hanging device, etc.The screen grids are stacked in each bin
of the screen box according to the requirements of the screen. The
compression device is simultaneously compressed in the vertical and
horizontal directions, and is hung on the suspension beam of the powder
room beam through the suspension device.

3. 4: Common wearing parts of Plansifter
1. Screen silk
The screens used in flour mills are roughly divided into the following
types according to their materials: Silk screen: from multiple strands
of natural silk twisted into silk, and then woven. They are characterized
by good elasticity, not easy to slack, and the hole size is not easy to
deform. It has good moisture absorption and release properties, and is
not easy to generate static electricity. But it is not abrasion resistant
and easy to fluff. Nylon screen: woven by polyamide monofilament fiber.
Wear resistance, long service life, high strength, and good comprehensive
use effect. The polyester screen is woven from polyester monofilament.
It has high strength and is not easy to deform, but compared with nylon
mesh, its abrasion resistance and antistatic effect are slightly worse.
"W" Coarse Wire Screen. "GG" refers to the grading screen, the weaving
method is full twisted weaving. "XX" refers to the fine material powder
screen, mainly used for powder screen, semi-twisted method.
2. Cleaning the brush
When choosing, according to customer needs.