Draeger X-act 7000 lets you precisely measure gases in the low parts per billion (ppb) range on site. It's easy to use, simply insert the Draeger MicroTubes, begin measuring, results are displayed on the display. Gas detectable are Benzene, 1,3 Butadiene, Ethylene Oxide, Formaldehyde & finally Mercury for the first time.

1. Dräger X-act® 7000
Multi-Gas Detection
The innovative Dräger X-act® 7000 analysis system consists of Dräger MicroTubes
and an opto-electronic analysis device that lets you precisely measure gases
in the low ppb range. It gives you precise results right on site, replacing slow,
expensive lab analyses. It's extremely easy to use: insert the Dräger MicroTubes,
start measuring, then read out the test result.
D-3489-2019
2.4 inch, high contrast colour display
160° viewing angle and day/night reading
mode
3-button control
For fast and easy operation
LED status indicator
Green LED glows
when test is complete
Dräger MicroTubes
For 10 measurements per gas.
Read test specifications by RFID
Automatic drive
For retracting the Dräger MicroTubes

2. Benefits
02 | Dräger X-act® 7000
Measures the lowest-quantity concentrations with lab-quality analysis
Concentrations of hazardous substances in ambient workplace air must never exceed the defined limits.
Monitoring these sometimes very low concentration levels is a responsible task. The Dräger X-act 7000 in
combination with Dräger MicroTubes is focussed on measuring carcinogenic and toxic substances in the
low ppb range. This sensitive testing system is based on colorimetric chemical sensors. These are capable
of replacing conventional laboratory analysis and providing precise results right on site. This saves time and
money.
More safety thanks to high selectivity
The substance-specific reactive layers and multiple pre-layers in the Dräger MicroTubes allow for selective gas
testing. The various layers serve as a filter, for example. During testing, they filter out other substances that
occur in the workplace so that only the target substance is reflected in the test result. This greatly eliminates
cross-sensitivities and reduces the number of false-positive test results and false alarms.
Explosion-proof and ready to use
The RFID tags applied to the Dräger MicroTubes contain all the calibration data that apply throughout their
normal lifespan of one year. This eliminates the need for lengthy function tests and manual calibration. Because
it works on the basis of mass-flow measurement, air pressure fluctuations have no influence on the device.
Any possible temperature or humidity influences are already accounted for during the factory calibration. The
analyser is explosion-proof and certified under ATEX/IECEx for Zone 0. The system is also dust- and splash-
resistant in accordance with IP54. It also meets the requirements for electromagnetic compatibility under
EN 50270.
Easy to use
After an automatic self-test, the X-act 7000 analysis system is immediately ready for use. It is suitable for testing
with all available Dräger MicroTubes. Simply insert the right Dräger MicroTube for your testing needs. The
automatic drive carefully draws the MicroTube in and positions it. Control your test using the 3-button control
and 2.4 inch colour display. When the test is complete, the green LED will glow and a message is displayed on
the screen. You can store the test result, location and time in the internal data logger and read it later using the
Dräger CC Vision software. The device is powered by five easily replaceable standard batteries. The battery life
lasts for more than ten hours of testing and can be read on the display.
Also suitable for pump-assisted testing
Using the coupler (connector piece), the Dräger X-am® Pump can be adapted to the X-act 7000. This allows
you to test for carcinogenic and toxic substances in the ppb range, even in hard-to-reach places like ducts,
pipelines or tanks up to a distance of 45 metres (147.6 feet). Because the X-am Pump is also certified
explosion-proof for Zone 0, it is perfectly suited for these tasks.

3. System Components
Dräger X-act® 7000 | 03
D-3380-2019
Dräger MicroTubes
With each set of MicroTubes, you can perform 10 tests in a row. The
concentrations of hazardous substances are shown on the X-act® 7000
display. Specific MicroTubes even allow you to perform tests in the ppb
range. The RFID tag applied to the Dräger MicroTube set contains all
the calibration data that apply throughout their normal lifespan of one
year. This eliminates the need for lengthy function tests and manual
calibration.
Accessories
D-11862-2016
Dräger X-am® Pump for Dräger X-act® 7000
The Dräger X-am® Pump is an external pump for portable gas detection
devices. In combination with the X-act® 7000, it allows you to perform
remote testing (for example, inside tanks or ducts). To use it, simply
attach the pump to the Dräger X-act® 7000 using a coupler. Control the
pump using the X-act® 7000 software.
D-3379-2019
Coupler
The coupler is the connector between the Dräger X-act® 7000 analysis
system and the Dräger X-am® Pump. It creates a secure, sealed
connection between the two devices.

4. Accessories
04 | Dräger X-act® 7000
D-50851-2015
FKM hose
Solvent-resistant
Available in four lengths:
Inner diameter 3.2 mm, length 5 m (16.4 ft)
Inner diameter 3.2 mm, length 10 m (32.8 ft)
Inner diameter 3.2 mm, length 20 m (65.6 ft)
Inner diameter 3.2 mm, length 45 m (147.6 ft)
D-50855-2015
PVC hose
With PTFE inner-hose
Available in two lengths:
3 m (9.8 ft)
15 m (49.2 m)
D-25396-2009
Telescopic probe
Available in four lengths:
70 cm (27.6 in)
90 cm (35.4 in)
100 cm (39.4 in)
150 cm (59 in)
D-6549-2017
Pre-tube holder
Pre-tube holders are needed to improve the sensitivity and selectivity of
some Dräger MicroTubes even further. The pre-tube holder ensures a
secure, sealed connection with the Dräger X-act® 7000.

5. Services
Dräger X-act® 7000 | 05
D-2331-2016
Product Service
Our product service provides support with different service packages –
in our workshops or directly on your premises. Care, maintenance and
servicing are crucial for safety and reliability – but careful maintenance
and care are a must, even when it comes to commercial considerations.
Preventive checks, ongoing care and use of original replacement parts
improve the longevity of your investment.
D-2335-2016
Training
The Dräger Academy has shared its solid, practical knowledge for over
40 years. We hold more than 2,400 training courses each year, on a
range of over 600 topics, with more than 110 authorised trainers. We
equip your staff with practical knowledge and ensure that what they
learn can be applied effectively, both day-to-day and, more importantly,
whenever critical situations occur. We will be pleased to develop a
customised training programme for you.
D-2330-2016
Rental Service
From bridging a temporary shortage of equipment to procuring
special equipment for applications involving specific requirements:
If you only need to cover a temporary higher demand, then Dräger
Rental Service with over 65,000 pieces of rental equipment is an
economical alternative to purchasing. Fast, straightforward and with a
wide range of additional services available upon request.
D-2329-2016
Shutdown Safety Service
In need of a comprehensive safety solution? Is there a long list of
legal requirements you have to meet, and are you pressed for time?
Balancing maximum efficiency with optimal security can pose major
challenges. We can help you achieve that balance. Our Shutdown
Safety Service is a solution that takes into account all the necessities of
downtime and especially your individual requirements.

6. Technical Data
06 | Dräger X-act® 7000
Measuring range and resolution Varies, depending on the Dräger MicroTubes in use
Typical testing time From 5 seconds to 1,200 seconds, depending on the Dräger
MicroTubes in use and the concentration of the test substance.
Ready to use Immediately
Calibration Not necessary
Operating temperature 0 to +40 °C
-20 to +60 °C (Analyser)Storage temperature
+4 to +25 °C (Dräger MicroTubes)
Air pressure 700 to 1,300 hPa
Humidity 0 to 95 % relative humidity, non-condensing
Recording of measured data CMOS sensor optics and LED light
System diagnostics Automatic, using micro-controllers for all system components
Display 2.4 inch high contrast, colour display with a resolution of
240 x 320, viewing angle of 160°
Menu languages English, German (language selection currently being expanded)
Operating time Approx. 600 minutes of testing time
Power supply 5 x 1.5 v batteries
Dimensions (L x W x H) 195 mm x 85 mm x 70 mm
Approvals (pending) ATEX/IECEx II 1G Ex ia IIC T4 Ga
Protection class IP54, dust- and splash-resistant
Dräger MicroTubes
Description Test range Test time (min–max) Part number
Benzene 1 – 150 ppb 100 – 900 seconds 86 10 600
Benzene 0.15 – 10 ppm 25 – 150 seconds 86 10 030
1.3-Butadiene 25 – 500 ppb 150 – 550 seconds 86 10 460
1.3-Butadiene 0.5 – 25 ppm 30 – 100 seconds 86 10 300
Ethylene oxide 25 – 250 ppb 200 – 500 seconds 86 10 580
Ethylene oxide 0.25 – 10 ppm 50 – 200 seconds 86 10 200
Formaldehyde 5 – 150 ppb 360 – 960 seconds 86 10 540
Formaldehyde 0.15 – 3 ppm 300 – 600 seconds 86 10 100
Mercury 0.005 – 0.25 mg/m3 240 – 1,200 seconds 86 10 350
Ordering Information
Dräger X-act® 7000 86 10 800
consisting of: Basic device X-act® 7000 incl. batteries, shoulder
strap complete, MicroTube Demo, Torx T10 screwdrawer, USB
cable 2 m with Mini-connection
Pump accessories
Dräger X-act® 7000 Coupler 86 10 810
Dräger X-am® Pump 83 27 100
Other accessories
Dräger X-act® 7000 pre-tube holder 37 01 985
Dräger Tubes®, ppb-Booster Basic 37 02 013
Tubeopener, TO 7000 64 01 200
Shoulder strap, compl 83 26 823
Labelholder for shoulder strap 83 26 824

7. Ordering Information
Dräger X-act® 7000 | 07
“Silver” Sticker Set, 5 pieces 83 27 645
“Blue” Sticker Set, 5 pieces 83 27 646
“Red” Sticker Set, 5 pieces 83 27 647
“Green” Sticker Set, 5 pieces 83 27 648
“Yellow” Sticker Set, 5 pieces 83 27 649
Carry Case, 500 x 420 x 175, black 83 27 661
Display Protector Film 83 26 828
Dust and Water Filter for Pump Inlet 83 19 364
Probes
ES150 Telescopic Probe (max. Length: 150 cm / 59 in) 83 16 533
Telescopic probe 100, incl. adapter
(max. length: 100 cm / 39.4 in)
83 16 530
Telescopic Probe 90 (max. length: 90 cm / 35.4 in) 83 16 532
Telescopic Leak Probe 70 (max. length: 70 cm / 27.6 in) 83 16 531
Hoses
PTFE-lined PVC hose, 3 m (9.8 ft) 83 26 980
PTFE-lined PVC hose, 15 m (49.2 ft) 45 94 679
Replacement hose for probes, 2 m (6.6 ft) 83 18 205
FKM hose, inner diameter: 3.2 mm, length: 5 m (16.4 ft) 83 25 705
FKM hose, inner diameter: 3.2 mm, length: 10 m (32.8 ft) 83 25 706
FKM hose, inner diameter: 3.2 mm, length: 20 m (65.6 ft) 83 25 707
FKM hose, inner diameter: 3.2 mm, length: 45 m (147.6 ft) 83 28 212
Hose connector, outer diameter: 5 mm 83 20 087
Adapter
Hose adapter, incl. 40 mm FKM 83 19 231
Reducer piece, incl. 30 mm FKM 83 20 086
Luer Adapter, Male, 3 mm 83 27 641

8. Notes
08 | Dräger X-act® 7000
Not all products, features, or services are for sale in all countries.
Mentioned Trademarks are only registered in certain countries and not necessarily in the country
in which this material is released. Go to www.draeger.com/trademarks to find the current status.
REGION MIDDLE EAST, AFRICA
Drägerwerk AG & Co. KGaA
Branch Office
P.O. Box 505108
Dubai, United Arab Emirates
Tel +971 4 4294 600
Fax +971 4 4294 699
contactuae@draeger.com
REGION DACH
Drägerwerk AG & Co. KGaA
Moislinger Allee 53–55
23558 Lübeck, Germany
Tel +49 451 882 0
Fax +49 451 882 2080
info@draeger.com
.
REGION EUROPE
Dräger Safety AG & Co. KGaA
Revalstraße 1
23560 Lübeck, Germany
Tel +49 451 882 0
Fax +49 451 882 2080
info@draeger.com
.
REGION MIDDLE EAST, AFRICA
Dräger Safety AG & Co. KGaA
Branch Office
P.O. Box 505108
Dubai, United Arab Emirates
Tel +971 4 4294 600
Fax +971 4 4294 699
contactuae@draeger.com
.
REGION ASIA PACIFIC
Draeger Singapore Pte. Ltd.
61 Science Park Road
The Galen #04-01
Singapore 117525
Tel: +65 6872 9288
Fax: +65 6259 0398
asia.pacific@draeger.com
.
REGION CENTRAL
AND SOUTH AMERICA
Draeger Panamá Comercial
S. de R.L.
59 East Street, Nuevo Paitilla,
House 31, San Francisco Town
Panama City, Panama
Tel +507 377-9100 / Fax -9130
servicioalcliente@draeger.com
.
Locate your Regional Sales
Representative at:
www.draeger.com/contact
9106700|18.12-1|HQ|PP|Subjecttomodifications|©2018DrägerwerkAG&Co.KGaA