1. FERROUS MATERIAL HANDLING
PERMANENT LIFTING MAGNETS
Dimensions are in inches. Maw = Maximum allowed weight on AISI 1020
Art - N°
Maw in lbs
on flat
Maw in lbs
on round
Minimum
Thickness for
100% force
Diameter
Min/max
Ø
A B C D E
Weight
(lbs)
20.01.100 220 110 0.59 1.18/7.87 4.92 2.67 2.75 2.12 1.57 9
20.01.250 550 275 0.98 1.18/7.09 7.51 3.85 3.42 2.75 1.96 21
20.01.500 1100 475 1.18 1.18/7.09 10.03 3.85 3.42 2.79 1.96 28.50
20.01.1000 2200 990 1.97 7.87/23.62 13.77 5.51 4.44 4.13 2.55 69.50
20.01.2000 4400 1790 2.36 1.57/11.81 17.32 7.08 6.69 4.92 2.36 187
20.01.3000 6600 2646 3.14 7.87/15.74 18.89 8.66 8.46 7.87 3.54 419
20.01.5000 11000 4950 3.93 7.87/15.74 21.25 14.56 12.40 9.05 3.93 882
APPLICATION
Permanent lifting magnets are used for handling of
ferrous materials, both flat and round, with raw or
machined surface. A 3:1 safety ratio.
execution
This new range of lifting magnets ensures SAFE,
QUICK and ECONOMIC handling.
The Highest energy NEODYMIUM magnets allow to
safely handle ferrous materials (no power supply
required). The holding force remains constant with
time.
The robust ON/OFF switch mechanism is equipped
with a safety device preventing unintentional
operation.
BRAILLON QUALITY
SINCE 1921
« Everyone
remembers
their first
Braillon »
2. FERROUS MATERIAL HANDLING
PERMANENT LIFTING MAGNETS
Braillon Magnetics
ZI ALPESPACE – BP 6
73806 MONTMELIAN Cedex FRANCE
Phone +33 (0)479 842 145
Fax +33 (0)479 841 449
info@braillon.com
Braillon Magnetic Systems Inc.
2333 Wisconsin Ave
Downers Grove 60515 IL – USA
Phone 312.912.13.55
usa@braillon.com
www.braillon.com
HOT APPLICATION
Used for handling high temperature ferrous
material. Up to 250° (482°F). A 3:1 safety ratio.
THIN SHEET APPLICATION
Used for handling thin steel sheet. On raw or
machined surfaces. A 3:1 safety ratio.
Dimensions are in inches. Maw = Maximum allowed weight on AISI 1020
Art - N° Maw on flat Minimum Thickness for 100% force A B C D E Weight (lbs)
20.01.TF.180 397 0.39 8.07 3.86 3.93 2.56 1.97 24
20.01.TF.300 661 0.59 10.08 3.86 3.93 2.95 1.97 33
Dimensions are in inches. Maw = Maximum allowed weight on AISI 1020
Art - N°
Maw in lbs
on flat
Maw in lbs
on round
Minimum
Thickness for
100% force
Diameter
Min/max
Ø
A B C D E
Weight
(lbs)
20.01.HT.200 440 220 0.98 1.18/7.08 7.52 3.86 3.42 2.72 1.97 20
20.01.HT.400 880 440 1.18 1.18/7.08 10.04 3.86 3.42 2.75 1.97 35
20.01.HT.800 1760 880 1.97 7.87/23.62 13.77 5.51 4.44 4.13 2.55 80