1. CURRICU LUM VITAE
G Pardha saradhi
H.No: 81Gowri Nagar, Manapakam,Chennai,Tamilanadu, India • 9940448505 •parthu234@gmail.com
Objec tive
To work in a technically challenging environment, and serve to the best of my abilities, contributing
towards the growth of organization as well as my own growth as an individual in all aspects.
Educa tion
Master of Technology- Power Systems 2009- 2011.
Sri Venkateswara University, Tirupati, Andhra Pradesh, India.
Bachelor of Technology- Electrical & Electronics Engineering 2005-2009.
JNT University, Anantapur, Andhra Pradesh, India.
Orga nizational Experience : Orga nizatio nal Expe rience : 4 years
2011 to 2014: Worked as Senior Design Engineer (Electrical) at L&T Construction.
2014 to till now: Working as Engineer (Electrical) at Ramboll Oil&Gas.
ROLES AND RESPO NSIBILITIES:
 Design and Detailed engineering of electrical system for LV, HV & EHV substations (Air insulated)
up to 220kV systems including Tender Preparation & Evaluation.
 Vendor drawing approval and getting approval from client.
 Preparation of Technical Specifications of various electrical equipment.
 Preparation/checking of Overall and Detailed SLDs, GA layout, Equipment layout, Earthing layout,
Lightning protection layout, Cable trench layout, Lighting Layout, Power & Control cable schedules.
 Master’s Degree in Power system and about almost 5 years of work experience. Experienced in the
following Power System Study concepts by using ETAP and EDSA,
o Load flow studies
o Fault analysis
o Relay co-ordination
o Harmonic Analysis
o Motor Starting Analysis
o Earthing.
 Experienced in the following Design and Detailed engineering of electrical system,
o Load estimation
o Transformer & DG sizing
o Short circuit Calculations
o Cable sizing(EHV/HV/LV) and voltage drop
o APFC calculation
o Illumination level Design
o Lighting / Power Distribution board schedule
o Earthing Systems
o Lightning protection system
o Cable tray sizing
o UPS Sizing
o Battery sizing Calculations
o Heat load calculation for UPS, battery and panels

2. o NGR sizing calculation.
o Transmission line sag calculation.
o Relay co-ordination.
o Solar systems.
o Hazardous area classification.
 Preparation of Design Guidelines for ETAP
 Preparation of Detailed Master Single line diagram from HT supply to LT Power distribution
 Preparation of Single line diagram for Rising main distribution
 Validation of Equipment datasheets and vendor documents.
 Pre-Tender Engineering and preparation of BOQ for EPC projects.
 Pre-Bid discussions with clients for design proposals and optimizations.
 Discussions with Clients and Consultants for drawing Approvals & Design issues.
 Co-ordination with Inter departments, Site, Vendor for design related issues and adherence to the
target schedules as a lead engineer for the respective jobs.
 Conversant with Electrical Standards – BIS, IEC, IEEE, ANSI, ADCO, ADMA & Shell DEP’s.
 Responsible for Preparation of Design basis Report & Engineering schedules for the projects,
releasing of procurement BOQ, Specifications, and releasing of GFC electrical drawings to site,
checking of individual service drawings, CSD (Coordinated service drawings) etc.
 Releasing/Preparation of BOQ, Design basis report, Risk assessment for Design built Tender jobs.
 Responsible for preparation of Drawings, review and releasing of all Good for construction electrical
drawings and getting approvals for all Major Equipment in co-ordination with
consultant/PMC/Client.
 Preparation of BOQ and specifications for the design built tenders/ Projects.
 Familiar with ISO, MS WORD, ETAP, EDSA, MATLAB, AUTOCAD, DIALUX etc.
PROJECTS
a) FEED Engineering for Process Control System & Power System Upgarde Project-
ADCO-UAE
The process Control system upgarde and Electical System upgrade on RDS1 to 5, Electrical System
upgrade Water injection cluster at 21 loactions. New Solar power system design for 119 water
injection cluster. Electrical scope is involved in this project and deliverables prepared as per project
requirements, 33kV, 3.3kV, 415V and 240V distribution system, spec and data sheets for major
equipments 3.3kv Switchgear, Transformer, LV switchgear, AC / DC UPS Emergency generator,
etc., SLD, Power System study, Equipment, power and earthing layouts, sizing calculations,
schedules and MTO etc.
b) Select Study for Long Term Accom m odation
ADMA - OPCO, United Arab Emirates
The existing accommodation facilities at Umm shaif and Lower Zakum are not adequate to support
requirement due to ongoing and future development activities. ADMA OPCO did an in-house
feasibility study and identified various available options. Based on the findings, it is intended to
carryout SELECT study covering both Umm Shaif and Lower Zakum fields. Electrical scope is
involved in this project and deliverables prepared as per project requirements, 11kV, 415V and 240V

3. distribution system, spec and data sheets for major equipments 11kv Switchgear, Transformer, LV
switchgear, UPS etc., SLD, Equipment, power and earthing layouts, sizing calculations, Power
system study, schedules and MTO etc.,
c) Electric al G/P - ETAP Design Guideline s –Stan dards Developm e nt
Preparation of ETAP Design Guidelines for load flow, short circuit, motor starting and advanced
studies.
d) CTS– SHOLIN GAN A LLUR –C HENN AI
Total electrification of entire campus and total load is around 17MVA.Complete electrification
includes 110kV switch yard, 33/0.433kV Substation consisting of 7 Nos Transformers and 10 Nos
DGs, DG synchronizing, Main PCCs and Complete distribution.
e) L&T SEAW OOD S-M U M BA I (TEN D ER PROJEC T)
Total electrification of entire project integrated development is programmed to be developed in 3
phases. Total load is around 74.65MVA.Complete electrification includes 220KV GIS switch yard,
11/0.433KV Substation consisting of distribution Transformers and DGs, DG synchronizing, Main
PCCs and Complete distribution.
f) ASCEND AS-PU NE(TEN D ER PROJEC T)
Total electrification of entire campus consisting Software Development Block. Total load is around
7MVA.Complete electrification includes 22/11KV Substation consisting of Power transformer and
distribution Transformers and DGs, DG synchronizing, Main HT Panel and Complete distribution.
Achieve me nts / Extra curricular Activities :
Published a paper in IEEE Conference-2014 with the title of “Real and reactive power
control distribution network by using SMES and Capacitor:”
http://ieeexplore.ieee.org/xpl/articleDetails.jsp?tp=&arnumber=7054954&searchWithin%3Dp_Authors%3A.QT
.Pardhasaradhi%2C+G.QT.
Secured GATE score of 86.77 percentile in 2008 & 92.33 percentile in 2010.
Participated in Technical workshops and national conferences held at university.
Lang uages Known:
1.English,2.Telugu,3.Tamil,4.Hindi
DATE:
Signature
PLACE: Chennai. G Pardhasaradhi