Sangameshwar Engineering Services Pvt. Ltd. specializes in handling heavy machinery and cargo. They have experience dismantling, erecting, assembling and transporting heavy equipment over 100 tons. Some of their past projects included installing 1000 ton sheet metal presses, 8000 ton forging presses, and shifting a 750 ton pier leg of a goliath crane. They have the expertise to handle all aspects of heavy lifting projects.

1. Sangameshwar
ENGINEERING SERVICES PVT. LTD.
HEAVY CARGO LIFTERS MOVERS & ERECTION
Handling of Heavy Projects Works, Dismantling & Erection of Forging Press
& Hammers, Stamping Press erection & Commissioning specialists . Store
handling systems, Transportation & Industrial Manpower & Rigging work.

2. We undertakes the following work:
• Handling of Heavy Machinery.
• Heavy Power & Forgings Project works.
• Dismantling, Erection & Assembly of Heavy
Machinery, Packers & Plant Movers .
• Loading And Unloading of Heavy Machinery.
• Store Handling System & Managements.
• Forging & Stamping Press Erection &
Commissioning.
• We have a specialty in Forging & Stamping Sectors
regarding handling their heavy press & hammers
for new Installation or maintenance.
• Mechanical & Hydraulic Crane & Trailors Suppliers.

3. HAVE A LOOK AT OUR GREAT ACHIEVEMENTS
ALL WORK DONE MANUALLY.
ALL THE JOBS ARE HEAVY CARGO.

4. In 2012
Poshs Metal Industries Pvt. Ltd.
(Karandi, Shikrapur)
Erection & commissioning of 1000 T Sheet metal Press

5. Installation of 1000 T
Sheetmetal Press.
Total Assembled Weight: 240
MT
Bed: 46 MT
Column: 17 Mt each (2 Nos.)
Tierods: 3 MT each (4 nos.)
Ram: 32 MT
Crown: 55 MT
Other Accessories : 50 MT

6. Shifting of Bed & Crown From U/L Point to Foundation.

10. In 2011
VARROC ENGGINEERING PVT LTD. (PLANT VIII)
Walunj MIDC Aurangabad
Erection & commissioning of 8000 T forging Press.

11. Installation of 8000 T ATO
forging press at “ varroc
engg. Pvt. Ltd. (Aurangabad)”
Total Assembled Weight: 850
MT
Bed: 110 MT
Column: 60 Mt each (2 Nos.)
Tierods: 17 MT each (4 nos.)
Ram: 75 MT
Tie Plate: 45 MT
Crank Shaft: 38 MT
Fly Wheel: 36 MT

12. Shifting & Tossing & erection of bed on foundation.

14. We use 150MT capacity crane for Installation of Tierods (4 nos.),
columns (2nos.), Ram

17. ATO 8000 T Forging
press ready for
electrical work.

18. In 1993,
Unloading, shifting. Erection & Complete Installation of
2500 T Russian Forging Press
2500 T German Forging Press
1250 T Russian Forging Press
1600 T Sharing Machine
6 T Russian numatic Hammer
At
Pradip Metal Ltd.
Navi Mumbai

20. 2500 T Russian Forging Press 400 T Trimming Press

21. M/s Paramount Forge
32/11,32/5,32/4b,
Village Bhamni, Talika Khalapur,
Raigad Dist. Maharashtra India.

22. Installation of 3500 T Forging
Hydraulic press at PARAMOUNT
FORGE Khopoli. (2010)
Its Total Weight is 500 MT .
Bed: 110 MT
Crown: 145 MT (With Pistons 4Nos.
Moving Ram: 80 MT
Columns: 27 Mt Each ( 2 nos. )
Tie Rods: 14 MT. each (4 Nos.)
Pipeline & other Accessories
weighted 50 MT

23. Bed Erection was Little bit risky
110 MT has to be placed on
foundation which was deep around
3mtr.
Crown (without pistons wt: 105MT)
was easy because pistons were not
installed . But it has to be lifted 18
feet up for installation of tie rods &
pistons.

24. Tie rods (14 Mt each ) were
installed for to maintained the
load balance.
Lifting of crown started
with 5 hydraulic jacks
(cap. 50 T). In 7 days the
desired height (18 ft.)
reach. But we want to
installed pistons at
(15ft.).

25. 4 Nos. of pistons were installed at the height of 15 ft. Each wt. 11 MT.
After installing the pistons cown will be weighted 145 MT.

26. Erection of ram (80 MT) should be placed between crown and bed.

27. Tie rods should be lifted up at 33 meter height to install columns. And
again downed to connect columns', bed & crown together.

29. Installation of 3500 T Chinese hydraulic prees completed in
60 days.

30. Installation of D-53K 3500 CNC Ring Rolling Machine

33. MAHINDRA UGINE STEEL CO. LTD.
Village Kanhe, Pune-Mumbai Road, Tal: Maval
Dist: Pune Maharashtra India.

34. • Installation of 1000 T Russian
press at Mahindra
Stampings (Kanhe ). (2010)
• Its weighted 475 MT .
• Bed: 85 MT
• Crown: 130 MT (With Gears 4
Nos.)
• Moving Ram: 80 MT
• Columns: 25 Mt Each ( 2 nos. )
• Tie Rods: 6 MT. each (4 Nos.)
• Pipeline & other Accessories
weighted 60 MT

35. •Bed Erection was easy 85
MT has to be placed on
foundation which was deep
around 4 mtr.
Crown (without gear wt: 90 MT)
After fixing gears with the crown its
wt. will be 130 MT.
And it has to be lifted 22 Ft. upward
to install columns.

37. • 4 nos of gears to be installed with the crown and lifted 22
ft. up for erection of columns.

39. •Crown lifted 22 ft height
within 6 days by our
Hydraulic jacking system

41. •Columns erection done
now its time to fixed them
with crown and bed by tie
rods.

42. •Tie rod erection with
column, bed & crown

43. • Erection of column. Bed, crown
& tie rod completed.

44. Moving Ram Installation with 1000 T press.

45. Installation of 1000 T
Russian mechanical
stamping press
erection/Installation
done within 30 days.

46. Shree Ganesh Forging Ltd.
T.T.C. Indl. Area Navi Mumbai.
Smeral Forging press line Erection.

47. Press shop erection at Shree Ganesh Forgings Ltd.
Navi Mumbai.

49. Smeral 4000 T & Smeral
2500 Forging press
installation at Shree
Ganesh Forgings Ltd.
Navi Mumbai.

51. 50 meter. Shifting of a Pier Leg
Of A Goliath Crane At Pipavav
Shipyard Pipavav, Gujarat.
(2010)
Its Size Details:
Length: 78 MTR.
Width: 50 MTR.
Weight: 750 Metric
Ton
i.e 7,50,000 KG

54. At

58. Press removed out of
foundation in 3 days &
Installed on Foundation
in 3 days.

59. We also work in Electricity & power project with
reputed & famous Govt. & Pvt. Companies

65. All the achivements were not possible without our
workmen & foreman.

66. For Any Enquiry please contact
Sangameshwar
Engineering Services Pvt. Ltd
Chinchwad Pune
Mr. B.S.Muley +919960866234
Mr. P.B.Muley +919860099326
Email: info@ses-pune.com
Web Site: www.ses-pune.com