Diese Präsentation wurde erfolgreich gemeldet.
Wir verwenden Ihre LinkedIn Profilangaben und Informationen zu Ihren Aktivitäten, um Anzeigen zu personalisieren und Ihnen relevantere Inhalte anzuzeigen. Sie können Ihre Anzeigeneinstellungen jederzeit ändern.

Actionable information 2

372 Aufrufe

Veröffentlicht am

Part of OFX Academy Course: Improving Line Performance
http://academy.optimumfx.com/course/improving-line-performance/
Improving Packaging Line Performance – Using the correct Data and Drill Down Analysis

Veröffentlicht in: Business
  • Als Erste(r) kommentieren

  • Gehören Sie zu den Ersten, denen das gefällt!

Actionable information 2

  1. 1. Improving Packaging Line Performance – Using the correct Data and Drill Down Analysis Actionable Information II www.optimumfx.com
  2. 2. Data…Data…Data == Good Information Excessive data – Lack of information The right data – with drill down analysis X Actionable Information
  3. 3. Actionable Information 1. What’s the right data to focus on the right areas? Causal (loss to critical machine Actual time Machine stoppages PDT/NOP 2. How can this be categorised in a useful way? And Why? ?
  4. 4. What is Six Loss? It would feel odd to drive a car without a dashboard… 6 loss Analysis is like the dashboard, providing useful information for making decisions at different times in your journey. Example: – When there is an indication that you are low on fuel – you will fill it up – When the Revs are too high – you will change gear
  5. 5. OEE & Six Loss
  6. 6. Why use Six Loss? • Six Loss allows you to accurately pinpoint the area of focus that will impact on the performance of the equipment’s output. • To reduce each loss there is an improvement tool. • All the Six Loss is doing is breaking down the equipment’s overall loss into six clear categories, to which, you can apply certain techniques to improve. It is what you do with this information makes the difference. • Speed of Execution and intervention followed by monitoring is critical. Combine Six Loss data with using the right tools on the biggest loss and accelerate the speed of execution - This WILL improve the performance of your equipment. • Many manufacturing plants spend a lot of time in measuring and recording data and don’t use most of it. Sometimes less is more!!! This is a key part of your Manufacturing Strategy
  7. 7. The Six Loss Tool Kit Six loss category OEE measure Reason for Loss Countermeasures Planned downtime or external unplanned event Availability  Changeovers  Planned maintenance  Material shortages  Labour shortages  Planned Downtime Management  5S Workplace Organisation  Pre-flight checks  SMED Breakdowns Availability  Equipment failure  Major component failure  Unplanned maintenance  Kaizen Blitz  PDCA  Root cause analysis  Asset Care / Planned / Prevent Maint Minor stops Performance  Fallen product  Obstruction  Blockages  Misalignment  Cleaning  5S Workplace Organisation  Adjustments / Centre Lining  Line Minor stop audits Speed loss Performance  Running lower than rated speed  Untrained operator not able to run at nominal speed  Line Balance Optimisation  Adjustments  Training Production rejects Quality  Product out of specification  Damaged product  scrap  Six Sigma  Error proofing  Root Cause Analysis Rejects on start up Quality  Product out of specification at start of run  Scrap created before nominal running after changeover  Damaged product after planned maintenance activity  Planned Downtime Management  5S Workplace Organisation  Standard Operating Procedures  Precision settings
  8. 8. Actionable Information 1. What’s the right data to focus on the right areas? Causal (loss to critical machine Actual time Machine stoppages PDT/NOP 2. How can this be categorised in a useful way? And Why? Six loss data Counter- measure for each loss 3.How can we focus our efforts ? ?

×