SlideShare ist ein Scribd-Unternehmen logo
1 von 26
Downloaden Sie, um offline zu lesen
Dr. Nafis Ahmad
Professor
Department of IPE, BUET
Email:nafis@ipe.buet.ac.bd
AEM-6235 Maintenance
and Safety Management
Reliability Centered Maintenance
6.
Reliability Centered
Maintenance
3
Topics
▷ Introduction to RCM
▷ RCM Goals
▷ Principles of RCM
▷ Basic RCM Process
▷ RCM Components
▷ Conclusions
4
Reliability Centered Maintenance
5
Reliability centered maintenance (RCM) is a systematic
process used to determine what has to be
accomplished to ensure that any physical facility is able
to continuously meet its designed functions in its
current operating context.
RCM leads to a maintenance program that focuses
preventive maintenance (PM) on specific failure modes
likely to occur. Any organization can benefit from RCM
if its breakdowns account for more than 20 to 25% of
the total maintenance workload.
RCM Goals
6
Some of the important goals of RCM are as follows:
• To develop design-associated priorities that can
facilitate PM.
• To gather information useful for improving the design
of items with proven unsatisfactory, inherent reliability.
• To develop PM-related tasks that can reinstate
reliability and safety to their inherent levels in the
event of equipment or system deterioration.
• To achieve the above goals when the total cost is
minimal.
Reliability Centered Maintenance
Principles of RCM Cont…
8
• RCM is system/equipment focused. RCM is concerned more with
maintaining system function as opposed to maintaining
individual component function.
• Safety and economics drive RCM. Safety is of paramount
importance, thus it must be ensured at any cost and then cost
effectiveness becomes the criterion.
• RCM is function-oriented. RCM plays an instrumental role in
preserving system/equipment function, not just operability for its
own sake.
• Design limitations are acknowledged by RCM. The goal of RCM is
to maintain the inherent reliability of the equipment/system design
and at the same time recognize that changes in inherent reliability
can only be made through design rather than maintenance.
Principles of RCM
9
• RCM is reliability-centered. RCM is not overly concerned with
simple failure rate, but it places importance on the relationship
between operating age and failures experienced. RCM treats
failure statistics in an actuarial fashion.
• An unsatisfactory condition is defined as a failure by RCM. A
failure could be either a loss of acceptable quality or a loss of
function.
• RCM is a living system. RCM collects information from the
results achieved and feeds it back to improve design and future
maintenance.
• Three types of maintenance tasks along with run-to-failure are
acknowledged by RCM. These tasks are defined as failure-
finding, time-directed, and condition-directed.
Reliability Centered Maintenance
Basic RCM process
11
RCM is a structured method to review systems and
components to determine applicable and effective action and
apply a variety of maintenance strategies to the task.
• Identify important items with respect to maintenance
• Obtain appropriate failure data
• Develop fault tree analysis data
• Apply decision logic to critical failure modes
• Classify maintenance requirements.
• Implement RCM decisions.
• Apply sustaining-engineering on the basis of field
experience.
Reliability Centered Maintenance
RCM Components
13
The four major components of RCM are:
1. Reactive maintenance
2. Preventive maintenance
3. Predictive testing and inspection and
4. Proactive maintenance
RCM Components
14
Reactive maintenance:
• This type of maintenance is also known as breakdown, fix-
when-fail, run-to-failure, or repair maintenance.
• When using this maintenance approach, equipment repair,
maintenance, or replacement takes place only when
deterioration in the condition of an item/equipment results in
a functional failure.
• When reactive maintenance is practiced solely, a high
replacement of part inventories, poor use of maintenance
effort, and high percentage of unplanned maintenance
activities are typical.
RCM Components
15
• Reactive maintenance can be practiced effectively only if it
is carried out as a conscious decision, based on the
conclusions of an RCM analysis that compares risk and
cost of failure with the cost of maintenance needed to
mitigate that risk and failure cost.
• Ineffective and inefficient in use of manpower and capital.
• No preventive maintenance.
• Cost is not a focus
• Easy to deploy
• Value destroyer
• Dangerous
RCM Components
16
Preventive maintenance
Preventive maintenance (PM), also called time-driven or interval-
based maintenance, is performed without regard to equipment
condition.
• It consists of periodically scheduled inspection, parts
replacement, repair of components/ items, adjustments,
calibration, lubrication, and cleaning.
• PM schedules regular inspection and maintenance at set
intervals to reduce failures for susceptible equipment.
• Practicing PM can lead to a significant increase in inspections
and routine maintenance. On the other hand, it can help reduce
the frequency and severity of unplanned failures.
• Preventive maintenance can be costly and ineffective if it is
the only type of maintenance practiced.
RCM Components
17
Predictive testing and inspection
• Predictive testing and inspections (PTI) is sometimes
called condition monitoring or predictive maintenance.
• To assess item/equipment condition, it uses
performance data, nonintrusive testing techniques, and
visual inspection.
• PTI replaces arbitrarily timed maintenance tasks with
maintenance that is performed as warranted by the
item/equipment condition.
• Analysis of item/equipment condition-monitoring data
on a continuous basis is useful for planning and
scheduling maintenance/repair in advance of
catastrophic or functional failure.
RCM Components
18
The collected PTI data are used to determine the equipment
condition and to highlight the precursors of failure in several
ways, including
 pattern recognition,
 trend analysis,
 correlation of multiple technologies,
 data comparison,
 statistical process analysis, and
 tests against limits and ranges.
RCM Components
19
Six PTI technologies/approaches are:
 Vibration monitoring and analysis
 Electrical condition monitoring
 Thermography
 Lubricant and wear particle analysis
 Passive (airborne) ultrasonic
 Nondestructive testing
20
RCM Components
21
Proactive maintenance:
• This type of maintenance helps improve maintenance through
actions such as better design, workmanship, installation,
scheduling, and maintenance procedures.
• The characteristics of proactive maintenance include
practicing a continuous process of improvement, using
feedback and communications to ensure that changes in
design/procedures are efficiently made available to item
designers/management, ensuring that nothing affecting
maintenance occurs in total isolation, with the ultimate goal of
correcting the concerned equipment forever, optimizing and
tailoring maintenance methods and technologies to each
application.
RCM Components
22
• Proactive maintenance performs root-cause failure analysis
and predictive analysis to enhance maintenance
effectiveness,
• conducts periodic evaluation of the technical content and
performance interval of maintenance tasks,
• integrates functions with support maintenance into
maintenance program planning, and
• uses a life cycle view of maintenance and supporting
functions.
Selecting RCM Strategies
Reliability Centered Maintenance
Conclusions
25
• Definition of RCM, principles and goals of RCM are
discussed.
• The four major components of RCM are: reactive
maintenance, preventive maintenance, predictive testing
and inspection and proactive maintenance.
• RCM strategies are discussed.
Thanks!
Any questions?
You can find me at:
@ahmadn
nafis@ipe.buet.ac.bd
26

Weitere ähnliche Inhalte

Was ist angesagt?

Reliability Centered Maintenance Implementation and Case Study
Reliability Centered Maintenance Implementation and Case StudyReliability Centered Maintenance Implementation and Case Study
Reliability Centered Maintenance Implementation and Case StudyWaseem Akram
 
Reliability Centered Maintenance
Reliability Centered MaintenanceReliability Centered Maintenance
Reliability Centered MaintenanceRonald Shewchuk
 
PRINCIPLES AND PRACTICES OF MAINTENANCE PLANNING
PRINCIPLES AND PRACTICES OF MAINTENANCE PLANNINGPRINCIPLES AND PRACTICES OF MAINTENANCE PLANNING
PRINCIPLES AND PRACTICES OF MAINTENANCE PLANNINGlaxtwinsme
 
Reliability Centered Maintenance Made Simple
Reliability Centered Maintenance Made SimpleReliability Centered Maintenance Made Simple
Reliability Centered Maintenance Made SimpleRicky Smith CMRP, CMRT
 
Condition based maintenance strategy
Condition based maintenance strategyCondition based maintenance strategy
Condition based maintenance strategyPriyesh Nair
 
Maintenance management and control
Maintenance management and controlMaintenance management and control
Maintenance management and controlNafis Ahmad
 
Maintenance planning systems
Maintenance planning  systemsMaintenance planning  systems
Maintenance planning systemsAnil Mohindru
 
RELIABILITY CENTERED MAINTAINANCE
RELIABILITY CENTERED MAINTAINANCERELIABILITY CENTERED MAINTAINANCE
RELIABILITY CENTERED MAINTAINANCEkifayat ullah
 
Best Practices in Maintenance and Reliability
Best Practices in Maintenance and ReliabilityBest Practices in Maintenance and Reliability
Best Practices in Maintenance and ReliabilityRicky Smith CMRP, CMRT
 
Boeing - Reliability Centered Maintenance
Boeing - Reliability Centered MaintenanceBoeing - Reliability Centered Maintenance
Boeing - Reliability Centered MaintenanceNandhagopal Muralithar
 
Principles and practices of maintenance planning
Principles and practices of maintenance planningPrinciples and practices of maintenance planning
Principles and practices of maintenance planningMudit M. Saxena
 
8 Steps To Success In Maintenance Planning And Scheduling
8 Steps To Success In Maintenance Planning And Scheduling8 Steps To Success In Maintenance Planning And Scheduling
8 Steps To Success In Maintenance Planning And SchedulingRicky Smith CMRP, CMRT
 

Was ist angesagt? (20)

Reliability Centered Maintenance Implementation and Case Study
Reliability Centered Maintenance Implementation and Case StudyReliability Centered Maintenance Implementation and Case Study
Reliability Centered Maintenance Implementation and Case Study
 
Reliability Centered Maintenance
Reliability Centered MaintenanceReliability Centered Maintenance
Reliability Centered Maintenance
 
PRINCIPLES AND PRACTICES OF MAINTENANCE PLANNING
PRINCIPLES AND PRACTICES OF MAINTENANCE PLANNINGPRINCIPLES AND PRACTICES OF MAINTENANCE PLANNING
PRINCIPLES AND PRACTICES OF MAINTENANCE PLANNING
 
Reliability Centered Maintenance Made Simple
Reliability Centered Maintenance Made SimpleReliability Centered Maintenance Made Simple
Reliability Centered Maintenance Made Simple
 
Reliability centered maintenance
Reliability centered maintenanceReliability centered maintenance
Reliability centered maintenance
 
Condition based maintenance strategy
Condition based maintenance strategyCondition based maintenance strategy
Condition based maintenance strategy
 
RCM
RCMRCM
RCM
 
Maintenance management and control
Maintenance management and controlMaintenance management and control
Maintenance management and control
 
Maintenance planning systems
Maintenance planning  systemsMaintenance planning  systems
Maintenance planning systems
 
RELIABILITY CENTERED MAINTAINANCE
RELIABILITY CENTERED MAINTAINANCERELIABILITY CENTERED MAINTAINANCE
RELIABILITY CENTERED MAINTAINANCE
 
Rcm terminology and concepts
Rcm terminology and conceptsRcm terminology and concepts
Rcm terminology and concepts
 
Maintenence management
Maintenence managementMaintenence management
Maintenence management
 
Best Practices in Maintenance and Reliability
Best Practices in Maintenance and ReliabilityBest Practices in Maintenance and Reliability
Best Practices in Maintenance and Reliability
 
RCM
RCMRCM
RCM
 
Boeing - Reliability Centered Maintenance
Boeing - Reliability Centered MaintenanceBoeing - Reliability Centered Maintenance
Boeing - Reliability Centered Maintenance
 
Reliability Centered Maintenance Case Study
 Reliability Centered Maintenance Case Study Reliability Centered Maintenance Case Study
Reliability Centered Maintenance Case Study
 
Principles and practices of maintenance planning
Principles and practices of maintenance planningPrinciples and practices of maintenance planning
Principles and practices of maintenance planning
 
Introduction to maintenance
Introduction to maintenanceIntroduction to maintenance
Introduction to maintenance
 
Rcm
RcmRcm
Rcm
 
8 Steps To Success In Maintenance Planning And Scheduling
8 Steps To Success In Maintenance Planning And Scheduling8 Steps To Success In Maintenance Planning And Scheduling
8 Steps To Success In Maintenance Planning And Scheduling
 

Ähnlich wie Reliability Centered Maintenance

RELIABILITY CENTERED MAINTAINANCE
RELIABILITY CENTERED MAINTAINANCERELIABILITY CENTERED MAINTAINANCE
RELIABILITY CENTERED MAINTAINANCEkifayat ullah
 
Reliability-centered maintenance (RCM) & Total Productive Maintenance (TPM).pptx
Reliability-centered maintenance (RCM) & Total Productive Maintenance (TPM).pptxReliability-centered maintenance (RCM) & Total Productive Maintenance (TPM).pptx
Reliability-centered maintenance (RCM) & Total Productive Maintenance (TPM).pptxSamuel Gher
 
Mechanical Integrity.pdf
Mechanical Integrity.pdfMechanical Integrity.pdf
Mechanical Integrity.pdfaashir14
 
MAINTENANCE POLICIES – PREVENTIVE MAINTENANCE
MAINTENANCE POLICIES – PREVENTIVE MAINTENANCEMAINTENANCE POLICIES – PREVENTIVE MAINTENANCE
MAINTENANCE POLICIES – PREVENTIVE MAINTENANCElaxtwinsme
 
Maintenance management
Maintenance managementMaintenance management
Maintenance managementramduttkholia
 
Lecture-3-Introduction to Maintenance Management.ppt
Lecture-3-Introduction to Maintenance Management.pptLecture-3-Introduction to Maintenance Management.ppt
Lecture-3-Introduction to Maintenance Management.pptThushan9
 
Maintenance of electrical machines
Maintenance of electrical machinesMaintenance of electrical machines
Maintenance of electrical machinesAnkit Basera
 
RBI for Power Generation
RBI for Power GenerationRBI for Power Generation
RBI for Power GenerationNikhil Kumar
 
Presentation maintenence management
Presentation maintenence managementPresentation maintenence management
Presentation maintenence managementVaisakh S Babu
 
Boost Equipment Performance, Save Money With Proactive Maintenance
Boost Equipment Performance, Save Money With Proactive MaintenanceBoost Equipment Performance, Save Money With Proactive Maintenance
Boost Equipment Performance, Save Money With Proactive MaintenanceJames Fitzgerald
 
A Decision Support System Based on RCM Approach to Define Maintenance Strategies
A Decision Support System Based on RCM Approach to Define Maintenance StrategiesA Decision Support System Based on RCM Approach to Define Maintenance Strategies
A Decision Support System Based on RCM Approach to Define Maintenance StrategiesCONFENIS 2012
 
Preventive and Predictive maintenance.ppt
Preventive and Predictive maintenance.pptPreventive and Predictive maintenance.ppt
Preventive and Predictive maintenance.pptMamoonurrasheed9
 
GOOD ENGINEERING PRACTICES
GOOD ENGINEERING PRACTICESGOOD ENGINEERING PRACTICES
GOOD ENGINEERING PRACTICESAditya Singh
 
The challenges facing in pharmaceutical maintenance
The challenges facing in pharmaceutical maintenanceThe challenges facing in pharmaceutical maintenance
The challenges facing in pharmaceutical maintenanceMANUEL PACINI
 
Maintenance Strategies.ppt
Maintenance Strategies.pptMaintenance Strategies.ppt
Maintenance Strategies.pptNazeeh11
 

Ähnlich wie Reliability Centered Maintenance (20)

RELIABILITY CENTERED MAINTAINANCE
RELIABILITY CENTERED MAINTAINANCERELIABILITY CENTERED MAINTAINANCE
RELIABILITY CENTERED MAINTAINANCE
 
Asset Managment
Asset ManagmentAsset Managment
Asset Managment
 
Reliability-centered maintenance (RCM) & Total Productive Maintenance (TPM).pptx
Reliability-centered maintenance (RCM) & Total Productive Maintenance (TPM).pptxReliability-centered maintenance (RCM) & Total Productive Maintenance (TPM).pptx
Reliability-centered maintenance (RCM) & Total Productive Maintenance (TPM).pptx
 
Mechanical Integrity.pdf
Mechanical Integrity.pdfMechanical Integrity.pdf
Mechanical Integrity.pdf
 
MAINTENANCE POLICIES – PREVENTIVE MAINTENANCE
MAINTENANCE POLICIES – PREVENTIVE MAINTENANCEMAINTENANCE POLICIES – PREVENTIVE MAINTENANCE
MAINTENANCE POLICIES – PREVENTIVE MAINTENANCE
 
Maintenance management
Maintenance managementMaintenance management
Maintenance management
 
CMMS
CMMSCMMS
CMMS
 
Lecture-3-Introduction to Maintenance Management.ppt
Lecture-3-Introduction to Maintenance Management.pptLecture-3-Introduction to Maintenance Management.ppt
Lecture-3-Introduction to Maintenance Management.ppt
 
Maintenace management and TPM
Maintenace management and TPMMaintenace management and TPM
Maintenace management and TPM
 
Maintenance of electrical machines
Maintenance of electrical machinesMaintenance of electrical machines
Maintenance of electrical machines
 
RBI for Power Generation
RBI for Power GenerationRBI for Power Generation
RBI for Power Generation
 
Presentation maintenence management
Presentation maintenence managementPresentation maintenence management
Presentation maintenence management
 
Maintenance and Asset Management
Maintenance and Asset ManagementMaintenance and Asset Management
Maintenance and Asset Management
 
Boost Equipment Performance, Save Money With Proactive Maintenance
Boost Equipment Performance, Save Money With Proactive MaintenanceBoost Equipment Performance, Save Money With Proactive Maintenance
Boost Equipment Performance, Save Money With Proactive Maintenance
 
A Decision Support System Based on RCM Approach to Define Maintenance Strategies
A Decision Support System Based on RCM Approach to Define Maintenance StrategiesA Decision Support System Based on RCM Approach to Define Maintenance Strategies
A Decision Support System Based on RCM Approach to Define Maintenance Strategies
 
Preventive and Predictive maintenance.ppt
Preventive and Predictive maintenance.pptPreventive and Predictive maintenance.ppt
Preventive and Predictive maintenance.ppt
 
GOOD ENGINEERING PRACTICES
GOOD ENGINEERING PRACTICESGOOD ENGINEERING PRACTICES
GOOD ENGINEERING PRACTICES
 
CV D. Maimbolwa
CV D. MaimbolwaCV D. Maimbolwa
CV D. Maimbolwa
 
The challenges facing in pharmaceutical maintenance
The challenges facing in pharmaceutical maintenanceThe challenges facing in pharmaceutical maintenance
The challenges facing in pharmaceutical maintenance
 
Maintenance Strategies.ppt
Maintenance Strategies.pptMaintenance Strategies.ppt
Maintenance Strategies.ppt
 

Mehr von Nafis Ahmad

Introduction CIM
Introduction CIMIntroduction CIM
Introduction CIMNafis Ahmad
 
Safety management
Safety management Safety management
Safety management Nafis Ahmad
 
IPE-431 Machine Tools (Part-C)
IPE-431 Machine Tools (Part-C)IPE-431 Machine Tools (Part-C)
IPE-431 Machine Tools (Part-C)Nafis Ahmad
 
Automatic Identification and Data Capture Techniques
Automatic Identification and Data Capture TechniquesAutomatic Identification and Data Capture Techniques
Automatic Identification and Data Capture TechniquesNafis Ahmad
 
Flexible Manufacturing System
Flexible Manufacturing SystemFlexible Manufacturing System
Flexible Manufacturing SystemNafis Ahmad
 
Decision making considering multi-attributes
Decision making considering multi-attributesDecision making considering multi-attributes
Decision making considering multi-attributesNafis Ahmad
 
Breakeven & sensitivity analysis
Breakeven & sensitivity analysisBreakeven & sensitivity analysis
Breakeven & sensitivity analysisNafis Ahmad
 
Replacement analysis
Replacement analysisReplacement analysis
Replacement analysisNafis Ahmad
 
Benefit-Cost (B-C) ratio analysis
Benefit-Cost (B-C) ratio analysisBenefit-Cost (B-C) ratio analysis
Benefit-Cost (B-C) ratio analysisNafis Ahmad
 
Depreciation and income taxes
Depreciation and income taxesDepreciation and income taxes
Depreciation and income taxesNafis Ahmad
 
Comparison and selection among alternatives
Comparison and selection among alternativesComparison and selection among alternatives
Comparison and selection among alternativesNafis Ahmad
 
CADCAM: Data exchange standards
CADCAM: Data exchange standardsCADCAM: Data exchange standards
CADCAM: Data exchange standardsNafis Ahmad
 
Industrial Robots
Industrial RobotsIndustrial Robots
Industrial RobotsNafis Ahmad
 
Evaluating a Single Project
Evaluating a Single ProjectEvaluating a Single Project
Evaluating a Single ProjectNafis Ahmad
 
Entity Manipulation
Entity ManipulationEntity Manipulation
Entity ManipulationNafis Ahmad
 
Evaluating a single project
Evaluating a single projectEvaluating a single project
Evaluating a single projectNafis Ahmad
 
Computer graphics
Computer graphicsComputer graphics
Computer graphicsNafis Ahmad
 
Failure Mode & Effect Analysis
Failure Mode & Effect AnalysisFailure Mode & Effect Analysis
Failure Mode & Effect AnalysisNafis Ahmad
 
Corrective maintenance
Corrective maintenanceCorrective maintenance
Corrective maintenanceNafis Ahmad
 

Mehr von Nafis Ahmad (20)

Introduction CIM
Introduction CIMIntroduction CIM
Introduction CIM
 
Safety management
Safety management Safety management
Safety management
 
IPE-431 Machine Tools (Part-C)
IPE-431 Machine Tools (Part-C)IPE-431 Machine Tools (Part-C)
IPE-431 Machine Tools (Part-C)
 
Automatic Identification and Data Capture Techniques
Automatic Identification and Data Capture TechniquesAutomatic Identification and Data Capture Techniques
Automatic Identification and Data Capture Techniques
 
Flexible Manufacturing System
Flexible Manufacturing SystemFlexible Manufacturing System
Flexible Manufacturing System
 
CAD-CAM-CIM
CAD-CAM-CIMCAD-CAM-CIM
CAD-CAM-CIM
 
Decision making considering multi-attributes
Decision making considering multi-attributesDecision making considering multi-attributes
Decision making considering multi-attributes
 
Breakeven & sensitivity analysis
Breakeven & sensitivity analysisBreakeven & sensitivity analysis
Breakeven & sensitivity analysis
 
Replacement analysis
Replacement analysisReplacement analysis
Replacement analysis
 
Benefit-Cost (B-C) ratio analysis
Benefit-Cost (B-C) ratio analysisBenefit-Cost (B-C) ratio analysis
Benefit-Cost (B-C) ratio analysis
 
Depreciation and income taxes
Depreciation and income taxesDepreciation and income taxes
Depreciation and income taxes
 
Comparison and selection among alternatives
Comparison and selection among alternativesComparison and selection among alternatives
Comparison and selection among alternatives
 
CADCAM: Data exchange standards
CADCAM: Data exchange standardsCADCAM: Data exchange standards
CADCAM: Data exchange standards
 
Industrial Robots
Industrial RobotsIndustrial Robots
Industrial Robots
 
Evaluating a Single Project
Evaluating a Single ProjectEvaluating a Single Project
Evaluating a Single Project
 
Entity Manipulation
Entity ManipulationEntity Manipulation
Entity Manipulation
 
Evaluating a single project
Evaluating a single projectEvaluating a single project
Evaluating a single project
 
Computer graphics
Computer graphicsComputer graphics
Computer graphics
 
Failure Mode & Effect Analysis
Failure Mode & Effect AnalysisFailure Mode & Effect Analysis
Failure Mode & Effect Analysis
 
Corrective maintenance
Corrective maintenanceCorrective maintenance
Corrective maintenance
 

Kürzlich hochgeladen

Summer training report on BUILDING CONSTRUCTION for DIPLOMA Students.pdf
Summer training report on BUILDING CONSTRUCTION for DIPLOMA Students.pdfSummer training report on BUILDING CONSTRUCTION for DIPLOMA Students.pdf
Summer training report on BUILDING CONSTRUCTION for DIPLOMA Students.pdfNaveenVerma126
 
me3493 manufacturing technology unit 1 Part A
me3493 manufacturing technology unit 1 Part Ame3493 manufacturing technology unit 1 Part A
me3493 manufacturing technology unit 1 Part Akarthi keyan
 
Engineering Mechanics Chapter 5 Equilibrium of a Rigid Body
Engineering Mechanics  Chapter 5  Equilibrium of a Rigid BodyEngineering Mechanics  Chapter 5  Equilibrium of a Rigid Body
Engineering Mechanics Chapter 5 Equilibrium of a Rigid BodyAhmadHajasad2
 
Clutches and brkesSelect any 3 position random motion out of real world and d...
Clutches and brkesSelect any 3 position random motion out of real world and d...Clutches and brkesSelect any 3 position random motion out of real world and d...
Clutches and brkesSelect any 3 position random motion out of real world and d...sahb78428
 
Multicomponent Spiral Wound Membrane Separation Model.pdf
Multicomponent Spiral Wound Membrane Separation Model.pdfMulticomponent Spiral Wound Membrane Separation Model.pdf
Multicomponent Spiral Wound Membrane Separation Model.pdfGiovanaGhasary1
 
Design of Clutches and Brakes in Design of Machine Elements.pptx
Design of Clutches and Brakes in Design of Machine Elements.pptxDesign of Clutches and Brakes in Design of Machine Elements.pptx
Design of Clutches and Brakes in Design of Machine Elements.pptxYogeshKumarKJMIT
 
Test of Significance of Large Samples for Mean = µ.pptx
Test of Significance of Large Samples for Mean = µ.pptxTest of Significance of Large Samples for Mean = µ.pptx
Test of Significance of Large Samples for Mean = µ.pptxHome
 
SATELITE COMMUNICATION UNIT 1 CEC352 REGULATION 2021 PPT BASICS OF SATELITE ....
SATELITE COMMUNICATION UNIT 1 CEC352 REGULATION 2021 PPT BASICS OF SATELITE ....SATELITE COMMUNICATION UNIT 1 CEC352 REGULATION 2021 PPT BASICS OF SATELITE ....
SATELITE COMMUNICATION UNIT 1 CEC352 REGULATION 2021 PPT BASICS OF SATELITE ....santhyamuthu1
 
Vertical- Machining - Center - VMC -LMW-Machine-Tool-Division.pptx
Vertical- Machining - Center - VMC -LMW-Machine-Tool-Division.pptxVertical- Machining - Center - VMC -LMW-Machine-Tool-Division.pptx
Vertical- Machining - Center - VMC -LMW-Machine-Tool-Division.pptxLMW Machine Tool Division
 
Basic Principle of Electrochemical Sensor
Basic Principle of  Electrochemical SensorBasic Principle of  Electrochemical Sensor
Basic Principle of Electrochemical SensorTanvir Moin
 
Mohs Scale of Hardness, Hardness Scale.pptx
Mohs Scale of Hardness, Hardness Scale.pptxMohs Scale of Hardness, Hardness Scale.pptx
Mohs Scale of Hardness, Hardness Scale.pptxKISHAN KUMAR
 
Nodal seismic construction requirements.pptx
Nodal seismic construction requirements.pptxNodal seismic construction requirements.pptx
Nodal seismic construction requirements.pptxwendy cai
 
Dev.bg DevOps March 2024 Monitoring & Logging
Dev.bg DevOps March 2024 Monitoring & LoggingDev.bg DevOps March 2024 Monitoring & Logging
Dev.bg DevOps March 2024 Monitoring & LoggingMarian Marinov
 
nvidia AI-gtc 2024 partial slide deck.pptx
nvidia AI-gtc 2024 partial slide deck.pptxnvidia AI-gtc 2024 partial slide deck.pptx
nvidia AI-gtc 2024 partial slide deck.pptxjasonsedano2
 
ChatGPT-and-Generative-AI-Landscape Working of generative ai search
ChatGPT-and-Generative-AI-Landscape Working of generative ai searchChatGPT-and-Generative-AI-Landscape Working of generative ai search
ChatGPT-and-Generative-AI-Landscape Working of generative ai searchrohitcse52
 
Landsman converter for power factor improvement
Landsman converter for power factor improvementLandsman converter for power factor improvement
Landsman converter for power factor improvementVijayMuni2
 
Gender Bias in Engineer, Honors 203 Project
Gender Bias in Engineer, Honors 203 ProjectGender Bias in Engineer, Honors 203 Project
Gender Bias in Engineer, Honors 203 Projectreemakb03
 

Kürzlich hochgeladen (20)

Summer training report on BUILDING CONSTRUCTION for DIPLOMA Students.pdf
Summer training report on BUILDING CONSTRUCTION for DIPLOMA Students.pdfSummer training report on BUILDING CONSTRUCTION for DIPLOMA Students.pdf
Summer training report on BUILDING CONSTRUCTION for DIPLOMA Students.pdf
 
Lecture 2 .pdf
Lecture 2                           .pdfLecture 2                           .pdf
Lecture 2 .pdf
 
me3493 manufacturing technology unit 1 Part A
me3493 manufacturing technology unit 1 Part Ame3493 manufacturing technology unit 1 Part A
me3493 manufacturing technology unit 1 Part A
 
Engineering Mechanics Chapter 5 Equilibrium of a Rigid Body
Engineering Mechanics  Chapter 5  Equilibrium of a Rigid BodyEngineering Mechanics  Chapter 5  Equilibrium of a Rigid Body
Engineering Mechanics Chapter 5 Equilibrium of a Rigid Body
 
Clutches and brkesSelect any 3 position random motion out of real world and d...
Clutches and brkesSelect any 3 position random motion out of real world and d...Clutches and brkesSelect any 3 position random motion out of real world and d...
Clutches and brkesSelect any 3 position random motion out of real world and d...
 
Multicomponent Spiral Wound Membrane Separation Model.pdf
Multicomponent Spiral Wound Membrane Separation Model.pdfMulticomponent Spiral Wound Membrane Separation Model.pdf
Multicomponent Spiral Wound Membrane Separation Model.pdf
 
Design of Clutches and Brakes in Design of Machine Elements.pptx
Design of Clutches and Brakes in Design of Machine Elements.pptxDesign of Clutches and Brakes in Design of Machine Elements.pptx
Design of Clutches and Brakes in Design of Machine Elements.pptx
 
Test of Significance of Large Samples for Mean = µ.pptx
Test of Significance of Large Samples for Mean = µ.pptxTest of Significance of Large Samples for Mean = µ.pptx
Test of Significance of Large Samples for Mean = µ.pptx
 
SATELITE COMMUNICATION UNIT 1 CEC352 REGULATION 2021 PPT BASICS OF SATELITE ....
SATELITE COMMUNICATION UNIT 1 CEC352 REGULATION 2021 PPT BASICS OF SATELITE ....SATELITE COMMUNICATION UNIT 1 CEC352 REGULATION 2021 PPT BASICS OF SATELITE ....
SATELITE COMMUNICATION UNIT 1 CEC352 REGULATION 2021 PPT BASICS OF SATELITE ....
 
Vertical- Machining - Center - VMC -LMW-Machine-Tool-Division.pptx
Vertical- Machining - Center - VMC -LMW-Machine-Tool-Division.pptxVertical- Machining - Center - VMC -LMW-Machine-Tool-Division.pptx
Vertical- Machining - Center - VMC -LMW-Machine-Tool-Division.pptx
 
Basic Principle of Electrochemical Sensor
Basic Principle of  Electrochemical SensorBasic Principle of  Electrochemical Sensor
Basic Principle of Electrochemical Sensor
 
Mohs Scale of Hardness, Hardness Scale.pptx
Mohs Scale of Hardness, Hardness Scale.pptxMohs Scale of Hardness, Hardness Scale.pptx
Mohs Scale of Hardness, Hardness Scale.pptx
 
Nodal seismic construction requirements.pptx
Nodal seismic construction requirements.pptxNodal seismic construction requirements.pptx
Nodal seismic construction requirements.pptx
 
Lecture 2 .pptx
Lecture 2                            .pptxLecture 2                            .pptx
Lecture 2 .pptx
 
Dev.bg DevOps March 2024 Monitoring & Logging
Dev.bg DevOps March 2024 Monitoring & LoggingDev.bg DevOps March 2024 Monitoring & Logging
Dev.bg DevOps March 2024 Monitoring & Logging
 
nvidia AI-gtc 2024 partial slide deck.pptx
nvidia AI-gtc 2024 partial slide deck.pptxnvidia AI-gtc 2024 partial slide deck.pptx
nvidia AI-gtc 2024 partial slide deck.pptx
 
Présentation IIRB 2024 Marine Cordonnier.pdf
Présentation IIRB 2024 Marine Cordonnier.pdfPrésentation IIRB 2024 Marine Cordonnier.pdf
Présentation IIRB 2024 Marine Cordonnier.pdf
 
ChatGPT-and-Generative-AI-Landscape Working of generative ai search
ChatGPT-and-Generative-AI-Landscape Working of generative ai searchChatGPT-and-Generative-AI-Landscape Working of generative ai search
ChatGPT-and-Generative-AI-Landscape Working of generative ai search
 
Landsman converter for power factor improvement
Landsman converter for power factor improvementLandsman converter for power factor improvement
Landsman converter for power factor improvement
 
Gender Bias in Engineer, Honors 203 Project
Gender Bias in Engineer, Honors 203 ProjectGender Bias in Engineer, Honors 203 Project
Gender Bias in Engineer, Honors 203 Project
 

Reliability Centered Maintenance

  • 1. Dr. Nafis Ahmad Professor Department of IPE, BUET Email:nafis@ipe.buet.ac.bd AEM-6235 Maintenance and Safety Management
  • 4. Topics ▷ Introduction to RCM ▷ RCM Goals ▷ Principles of RCM ▷ Basic RCM Process ▷ RCM Components ▷ Conclusions 4
  • 5. Reliability Centered Maintenance 5 Reliability centered maintenance (RCM) is a systematic process used to determine what has to be accomplished to ensure that any physical facility is able to continuously meet its designed functions in its current operating context. RCM leads to a maintenance program that focuses preventive maintenance (PM) on specific failure modes likely to occur. Any organization can benefit from RCM if its breakdowns account for more than 20 to 25% of the total maintenance workload.
  • 6. RCM Goals 6 Some of the important goals of RCM are as follows: • To develop design-associated priorities that can facilitate PM. • To gather information useful for improving the design of items with proven unsatisfactory, inherent reliability. • To develop PM-related tasks that can reinstate reliability and safety to their inherent levels in the event of equipment or system deterioration. • To achieve the above goals when the total cost is minimal.
  • 8. Principles of RCM Cont… 8 • RCM is system/equipment focused. RCM is concerned more with maintaining system function as opposed to maintaining individual component function. • Safety and economics drive RCM. Safety is of paramount importance, thus it must be ensured at any cost and then cost effectiveness becomes the criterion. • RCM is function-oriented. RCM plays an instrumental role in preserving system/equipment function, not just operability for its own sake. • Design limitations are acknowledged by RCM. The goal of RCM is to maintain the inherent reliability of the equipment/system design and at the same time recognize that changes in inherent reliability can only be made through design rather than maintenance.
  • 9. Principles of RCM 9 • RCM is reliability-centered. RCM is not overly concerned with simple failure rate, but it places importance on the relationship between operating age and failures experienced. RCM treats failure statistics in an actuarial fashion. • An unsatisfactory condition is defined as a failure by RCM. A failure could be either a loss of acceptable quality or a loss of function. • RCM is a living system. RCM collects information from the results achieved and feeds it back to improve design and future maintenance. • Three types of maintenance tasks along with run-to-failure are acknowledged by RCM. These tasks are defined as failure- finding, time-directed, and condition-directed.
  • 11. Basic RCM process 11 RCM is a structured method to review systems and components to determine applicable and effective action and apply a variety of maintenance strategies to the task. • Identify important items with respect to maintenance • Obtain appropriate failure data • Develop fault tree analysis data • Apply decision logic to critical failure modes • Classify maintenance requirements. • Implement RCM decisions. • Apply sustaining-engineering on the basis of field experience.
  • 13. RCM Components 13 The four major components of RCM are: 1. Reactive maintenance 2. Preventive maintenance 3. Predictive testing and inspection and 4. Proactive maintenance
  • 14. RCM Components 14 Reactive maintenance: • This type of maintenance is also known as breakdown, fix- when-fail, run-to-failure, or repair maintenance. • When using this maintenance approach, equipment repair, maintenance, or replacement takes place only when deterioration in the condition of an item/equipment results in a functional failure. • When reactive maintenance is practiced solely, a high replacement of part inventories, poor use of maintenance effort, and high percentage of unplanned maintenance activities are typical.
  • 15. RCM Components 15 • Reactive maintenance can be practiced effectively only if it is carried out as a conscious decision, based on the conclusions of an RCM analysis that compares risk and cost of failure with the cost of maintenance needed to mitigate that risk and failure cost. • Ineffective and inefficient in use of manpower and capital. • No preventive maintenance. • Cost is not a focus • Easy to deploy • Value destroyer • Dangerous
  • 16. RCM Components 16 Preventive maintenance Preventive maintenance (PM), also called time-driven or interval- based maintenance, is performed without regard to equipment condition. • It consists of periodically scheduled inspection, parts replacement, repair of components/ items, adjustments, calibration, lubrication, and cleaning. • PM schedules regular inspection and maintenance at set intervals to reduce failures for susceptible equipment. • Practicing PM can lead to a significant increase in inspections and routine maintenance. On the other hand, it can help reduce the frequency and severity of unplanned failures. • Preventive maintenance can be costly and ineffective if it is the only type of maintenance practiced.
  • 17. RCM Components 17 Predictive testing and inspection • Predictive testing and inspections (PTI) is sometimes called condition monitoring or predictive maintenance. • To assess item/equipment condition, it uses performance data, nonintrusive testing techniques, and visual inspection. • PTI replaces arbitrarily timed maintenance tasks with maintenance that is performed as warranted by the item/equipment condition. • Analysis of item/equipment condition-monitoring data on a continuous basis is useful for planning and scheduling maintenance/repair in advance of catastrophic or functional failure.
  • 18. RCM Components 18 The collected PTI data are used to determine the equipment condition and to highlight the precursors of failure in several ways, including  pattern recognition,  trend analysis,  correlation of multiple technologies,  data comparison,  statistical process analysis, and  tests against limits and ranges.
  • 19. RCM Components 19 Six PTI technologies/approaches are:  Vibration monitoring and analysis  Electrical condition monitoring  Thermography  Lubricant and wear particle analysis  Passive (airborne) ultrasonic  Nondestructive testing
  • 20. 20
  • 21. RCM Components 21 Proactive maintenance: • This type of maintenance helps improve maintenance through actions such as better design, workmanship, installation, scheduling, and maintenance procedures. • The characteristics of proactive maintenance include practicing a continuous process of improvement, using feedback and communications to ensure that changes in design/procedures are efficiently made available to item designers/management, ensuring that nothing affecting maintenance occurs in total isolation, with the ultimate goal of correcting the concerned equipment forever, optimizing and tailoring maintenance methods and technologies to each application.
  • 22. RCM Components 22 • Proactive maintenance performs root-cause failure analysis and predictive analysis to enhance maintenance effectiveness, • conducts periodic evaluation of the technical content and performance interval of maintenance tasks, • integrates functions with support maintenance into maintenance program planning, and • uses a life cycle view of maintenance and supporting functions.
  • 25. Conclusions 25 • Definition of RCM, principles and goals of RCM are discussed. • The four major components of RCM are: reactive maintenance, preventive maintenance, predictive testing and inspection and proactive maintenance. • RCM strategies are discussed.
  • 26. Thanks! Any questions? You can find me at: @ahmadn nafis@ipe.buet.ac.bd 26