1.
Dimensions
I N M U L T I V A R I A N T
F A B R I C A T I O N S
MDIA
Contents
V1 Where Dimensions Live
V2 Pre-Glass Concept vs Plait Scalable Design
V3 Musical Z in D Major and Minor
Apportioning
and delivery
of GETi
Trading
Look!

2.
Questions of Dimension
 In the ordinary Business Accounting Problem that has dimensional
implications, three or four partners are attempting to apportion the
income and find that problems of scale are interfering with the
result. How shall problems of scale be apportioned in relation to
ownership?
 In a job of multivariant sizes, how can the adjustor determine the
value of a claim, or the builder assess and quote on a job that
requires an apportioned lot of materials?
 In the determination of a business combination or interior joint
assembly problem among divisions, how can the business bifurcate
the value of royalty assessments or gains attribution among interior
members?
 In an econometric circumstance or tax basis problem, who is the
owner of the business interest? And if customers exist in geometric
distances, how do we surcharge the standard freight cost to specific
delivery zones? Is that a problem in glass?
Apportioning
Ownership
Economies of
Scale
Apportioning
Cost
Multivariant
Lot Sizes
Business
Combinations
Royalty
Assessments
Gains
Attribution
Determining
Ownership
Econometric
Basis
Delivery
Zone
The complete
scientific
answer will
be shown
here
5/25/2022 Brij Consulting, LLC Jean Marshall 2
Probability
of Load
Relations +
Facts
changed
Load relation probable parts changed to
mirror an actual dim contract in V2
Changed
see V2!
Changed
see V2!
Actual Contract
Dimensions used to Size
GETi IP Probable Parts See Slide 21

3.
Revelation: Supernatural Dimensions
The one who spoke to me held a gold measuring rod to measure the city, its gates, and its wall.
16The city was square, its length the same as [also] its width. He measured the city with the rod and found it fifteen hundred
miles* in length and width and height.
17He also measured its wall: one hundred and forty-four cubits* according to the standard unit of measurement the angel used.
18* The wall was constructed of jasper, while the city was pure gold, clear as glass.
19The foundations of the city wall were decorated with every precious stone; the first course of stones was jasper, the second
sapphire, the third chalcedony, the fourth emerald,
20the fifth sardonyx, the sixth carnelian, the seventh chrysolite, the eighth beryl, the ninth topaz, the tenth chrysoprase, the eleventh
hyacinth, and the twelfth amethyst.
21The twelve gates were twelve pearls, each of the gates made from a single pearl; and the street of the city was of pure gold,
transparent as glass.
Green Energy, the
forerunner of Blue is
stored in crystals that
cascade in mu sic
Precious
Stones are
made in star
formations
5/23/2022
Brij Consulting, LLC Jean Marshall 3

4.
V1 Where Dimensions Live
M I R R O R S

5.
Lens Structure
BASIS IN STAR FORMULATION OUR STUDY BEGAN IN 2020
 A mirror is part of the Lens structure as
the primary aid to building in Ark Design.
And this is because it helps to establish all
the relational aspects of the design
dimensionally.
 Our ellipsis has 4 rings in it and is double
sided in correlation of the synchronous
nature of harmonious delivery.
5/23/2022 Brij Consulting, LLC Jean Marshall 5

6.
Unapplied Ownership
 Like people, unapplied ownership fails
to be responsible or accountable for its
impact on the environment or on
security of others.
 In this case an economic gap would
remain undeveloped as a place where
opportunity would supply growth. Like
a field gone fallow it would fail to
produce for the people a new and
readily developed economic benefit.
Unapplied Ownership
• Fails to be accountable for effects
• Undeveloped Gap Contingency
• Economies of Scale are not resolved
Glass Economy has Oversight and
Intellectual Property Applied to Ownership
5/23/2022 Brij Consulting, LLC Jean Marshall 6

7.
Composing
Dimensional
Relationship
In order to
demonstrate the
Lens correlations,
we will solve these
problems in
reverse order
Apportioning Ownership
• Economies of Scale
Apportioning Cost
• Multivariant Lot Sizes
Business Combinations
• Royalty Assessments
• Gains Attribution
Determining Ownership
• Econometric Basis
• Delivery Zone
Enoch Chapter 28
Enoch 28:1 Then I went to another place from the desert; towards the east of
that mountain which I had approached.
Enoch 28:2 There I beheld choice trees, (32) particularly, those which
produce the sweet-smelling opiate, frankincense and myrrh; and trees unlike to
each other.
(32) Choice trees. Literally, "trees of judgment" (Laurence, p. 35; Knibb, p.
117).
5/23/2022
Brij Consulting, LLC Jean Marshall 7

8.
5/23/2022 Brij Consulting, LLC Jean Marshall 8
Containers, Dimension, Ownership and Portfolio
 This interpolation shows the economic interest
between a customer and supplier Determining Ownership
• Econometric Basis = 4.7
• Delivery Zone = 4
Q: In an econometric circumstance or tax basis
problem, who is the owner of the business interest?
And if customers exist in geometric distances, how do
we surcharge the standard freight cost to specific
delivery zones? Is that a problem in glass?
A: 1-The one to whom the branch pertains
2. Freight may not apply but distribution costs will be
applied in the setup
3. Conversion on various properties supplies a zone
respective center; That which is furthest away requires
more craft application for delivery. We used a 4 for
remote delivery
(4,000,000)
(2,000,000)
-
2,000,000
4,000,000
6,000,000
Sum of
Gains
Sum of
Conversion
Sum of Final
Economic Interest
Branch Last
Bridge Series
Conversion Process
Form Setup
Process Critical Path
Report Frame
Transaction Record
Branch 2 Last
4.7 x 4 = 18.8
See next…
Geo marker
BI

9.
Value of Thread is in its Z Appliance
 Using our template for
disagreement in the
data caused by
noncompliance, we have
calculated our risk
factor in a remote
application.
 We believe that secant
applications can close
this gap which is 42k x
2 or $84k. The glass
system mitigates gap
error.
z
.065/12
7.6% see next
5/23/2022 Brij Consulting, LLC Jean Marshall 9

10.
Green X in Gains Related Attribution
 In determining the means to attribute gains
according to a natural bifurcation, we found
the means to distribute the cost and found
new facts related to Green Energy correlation.
Business Combinations
• Business Royalty Assessments
• Gains Attribution
Q: In the determination of a business
combination or interior joint assembly problem
among divisions, how can the business
bifurcate the value of royalty assessments or
gains attribution among interior members?
A: In gains attribution of equivalent distribution
around a central mean 6 x sq. root of 2 is the
secant combined metric. Thus, a green crystal
formation could attribute as well.
6 x 1.414 =8.484
Y=4.242
1.67=1.414/8.484
NT = Plait Finish
3.34 Gate
=7.6
-.267
2.67/10
5/23/2022 Brij Consulting, LLC Jean Marshall 10
Green X=

11.
Variable Rate Demand in Dedicated Apportionment
Q : I n a job of multivariant
size s, how can the ad justor
d e termine the v alue of a
claim, or the b uilder asse ss
and q uote on a job that
re quires an ap p ortioned lot
of mate rials?
A: O ne me thod is to take the
number of ite ms ov e r and
under the orig inal e stimate
according to the p rice b ook
and the p rob ability that the
job w ill run ov e r or under
that p rice at the time of
market or v olume
d istribution
Apportioning Cost
Mapped Outcome shows a higher
probable outcome for glass, than
our weighted calculation
The Different Types of Scientific Methods
• Analytic-Synthetic Method. The analytic-synthetic method refers to the analysis
and synthesis processes. ... (RELATED TO ACTUAL PROCESSES)
• The Inductive-Deductive Method. Mainly, this method represents two opposite
processes: induction and deduction. The induction process reasons from the data
of particular cases to broader knowledge. (CORRELATION TO TEXTS)
• Hypothetico-Deductive Method. The hypothetico-deductive method starts with
hypotheses. These are based on principles or laws or established through
empirical data. (EMULATION SUCCESS)
• Historical-Logical Method. To discover the essence of things, logic needs history.
Somehow, this method allows you to describe the facts through their logical
development. (AMERICAN COVENANT OF INDUSTRY)
75%
5/25/2022
Brij Consulting, LLC Jean Marshall
11

12.
VRD Green Apportion Chart
Create Association
Using a data-mined array we generated the
cross chart and applied the Green X to it
.267
This green
energy crystal
becomes our
incumbent load
Level Each side 15 degrees
4x
5/23/2022 Brij Consulting, LLC Jean Marshall 12

13.
Ownership in Magnitude of Service Orientation
 In Plait
arrangements it
is necessary to
create an order
of magnitude
related to service
in order to keep
dimensional ends
corresponded
Apportioning Ownership
Q: In the ordinary Business Accounting
Problem that has dimensional implications,
three or four partners are attempting to
apportion the income and find that problems of
scale are interfering with the result. How shall
problems of scale be apportioned in relation to
ownership?
A: Our approach is to use powers in the
relationship
-50
0
50
100
150
200
250
300
350
-350 -300 -250 -200 -150 -100 -50 0 50 100
Union Cycle in Lens Affiliation
Series1 Series2
Green Energy sits at the low
end of the spectrum however it
still has a magnitude of the
upper realm of works.
The Investment
must be
apportioned so
that the
Intellectual
Properties and
prospectus for
each industry
promoted
5/23/2022 Brij Consulting, LLC Jean Marshall 13

14.
A Mirrored Association
Because these
objects have a
sympatico
symmetry and
synergy these
can be made
with mirrors
5/25/2022 Brij Consulting, LLC Jean Marshall 14
Requires
Thread
GEC
…next
In Glass there is no
cloaking to aid
dispersion, all
parts are used in
forms and mix
Now
changed
Load relation probable facts changed to
mirror an actual dim contract in V2

15.
V2 Pre-Glass Concept vs
Plait Scalable Design
15 Brij Consulting, LLC Jean Marshall 5/24/2022
Contents
V1 Where Dimensions Live
V2 Pre-Glass Concept vs Plait Scalable Design
V3 Musical Z in D Major and Minor
Glass Path: Thread
includes FORMS
Development
Pre-Glass Gold Nano Process
Weighting and Probability Factors highlighted

16.
5/24/2022 Brij Consulting, LLC Jean Marshall 16
Intellectual Properties
Testing
45% weight
74-75%
probability
37.748 x2 = 75.4
@4
From slide 14
Payback
p
t
t
p
∆
∆
Zr
Zr
Zr
wall
.612 ideal yield
Changed on Slide 21

17.
5/25/2022 Brij Consulting, LLC Jean Marshall 17
Current Levels of Science
 Plasmons are a collective oscillation of electrons in a
material occurring because of the co-mingling of electric
and magnetic fields. Plasmonic can refer to shapes,
materials, and interfaces that exhibit behaviors like plasmon
propagation (polariton) or resonance. Metamaterial
research is interdisciplinary and involves such fields
as electrical engineering, electromagnetics,
classical optics, solid state physics, microwave and
antenna engineering, optoelectronics, material
sciences, nanoscience and semiconductor engineering.[4]
 In physics, a plasmon is a quantum of plasma oscillation.
Just as light (an optical oscillation) consists of photons, the
plasma oscillation consists of plasmons. The plasmon can
be considered as a quasiparticle since it arises from the
quantization of plasma oscillations, just like phonons are
quantization of mechanical vibrations. Thus, plasmons are
collective (a discrete number)
The 2021-2022 Journal Impact IF of Materials
Science is 0.675, which is just updated in 2022.
Materials Science Journal Impact IF Highest IF
0.748 Key Factor Analysis
ISSN: 1068-820X
ISSN (Online): 1573-885X
Journal Title: Materials Science
Publisher: Springer International Publishing AG
Focusing on industrial physics has us looking
into the materials science realm of plasmons to
identify strides in a similar area of research as
glass construction has offered to us.
Plasmons: def. a quantum or quasiparticle
associated with a local collective oscillation of
charge density.
74.8

18.
5/25/2022 Brij Consulting, LLC Jean Marshall 18
Actual Price Quotation
 We used a sample
contract metric
conversion for
comparison
Rough Out
@Gate
Level 1
We are treating this as if we are going to
fabricate with flat glass panels
Thread
Related

19.
5/26/2022 Brij Consulting, LLC Jean Marshall 19
Goal is to Containerize the Level 1 Quote and Build in Glass
L1 L4
Dimensions of
L1 Quote
The Level 1 Quote is for home
repair, and it can be containerized
and fabricated in glass. We know
its dimensions.
The Level 4 Quote is for Green
Energy Forms and Mix and we
don’t know its dimensions.
The L1 Quote is at its base build level
so it may not have the same time and
motion motion requirements but that
is dependent on thread not forms. So,
in this case we can use the L1 to
translate forms for the L4
<<Glass relations see slide 20>>
<<Square Foot Conversion to Dim
Metrics >>
<<Interior Fabrication slide 20>>

20.
5/26/2022 Brij Consulting, LLC Jean Marshall 20
Defining Forms in Dimensional Relationships
 There are 20 lot sizes in our quote and using
1.41 per lot, we associate a load of 2.82 x 10
Architectural
dimensions in
sq feet
Tree Lots
based on
glass form
requirements
for L4
contract
Dimensions of L4 Quote
Starting Lot of
sizes based on
mix of contract
parts
T h e C o n t r a c t C o s t o f g l a s s i n t e r i o r s i s
g r e a t l y r e d u c e d d u e t o f a b r i c a t i o n a n d
p r o d u c t i o n m e t h o d s m a y a l s o t r i m a n d
c h a n g e c o l o r m i x . T h e r e i s r e d u c e d
c a r r i a g e b u r d e n f o r t h e m e t h o d .
Adjust for Practical Use
Working
Backwards
based on
Terms
GEC
47.9693 Cube root of 110380

21.
5/26/2022 Brij Consulting, LLC Jean Marshall 21
IP Formation on Green Energy Dim permits Thread Design
 Green Energy is produced first in ocean charging climates that
use a potential energy mix to acquire the charge of the ocean
water absorption in saltwater currents of deep-sea attribution.
 Glass emulates any metal or material that it sponsors in its
emulated elemental form. Rather than using electro-magnetism
it uses a power drain type of suction more common to a pump
with water (a unique use of particle and light wave.)
 Thread design is a considerable aspect of the working
requirement for all green energy roads and appliances and is
considerably less dangerous to life (green safe erudition.)
Green Energy is
used for multiple
purposes in plait
glass systems, but
the glass car
relationship is
immediately remote
(L4)
Modern use of
coil and water
submersibles
(L1)
GEC
High Yield see App III

22.
5/26/2022 Brij Consulting, LLC Jean Marshall 22
Use of Thread and Thread Designs (Starting Process)
 Pulling with Secant Driven Threaded Designs
t1A t2A z1A z2A xA yA t1P t2P z1P
z2P xP yP t1B t2B z1B z2B xB yB
Lot
Footer Fulcrum
t1A t2A z1A z2A xA yA t1P t2P z1P
z2P xP yP t1B t2B z1B z2B xB yB
Green
Kinetic
Stage
GEC

23.
V3 Musical Z in
D Major and Minor
23 Brij Consulting, LLC Jean Marshall 5/25/2022
Contents
V1 Where Dimensions Live
V2 Pre-Glass Concept vs Plait Scalable Design
V3 Musical Z in D Major and Minor
Glass Path: Mu Sic
LENS
Development
Contract L1 changed to L4 T&MM Wall Cascade

24.
Objects, Plaits
5/23/2022 Brij Consulting, Jean Marshall
24
(314,703,413,080,627)
141,886,157,308,799
(456,589,570,389,426)
0.30268
y
m
b
r^2
Series1 Series2 Series3 Sum of wall
Sum of
brace
Sum of
thread
(100,000,000,000)
(50,000,000,000)
-
50,000,000,000
100,000,000,000
150,000,000,000
Brace
Conversion
Final
Gains
Setup
Thread
Wall
-
1,000,000,000,000.00
2,000,000,000,000.00
3,000,000,000,000.00
4,000,000,000,000.00
5,000,000,000,000.00
C A S C A D EC A S C A D EC A S C A D EC A S C A D EC A S C A D E
1 2 3 4 5
Levels
of
Plait
Curved Instances
CASCADING PLAIT
Multiple Glass Applications can
Plait Together and form tools for
generating instances (Appliances)
Holding an energy
resource within its element
makes it a
From
“Instancing at
the Gate”
LENS

25.
Evergreen and Continuous Thread
• Dynamics of GREEN Test confirms Lease Cost
5/23/2022
Brij Consulting, LLC Jean Marshall 25
Ω
Ω
y = 0.0026x2 + 0.9854x + 11.061
R² = 0.0997
y = -0.693x2 + 5.4926x + 416.79
R² = 0.0046
y = -0.9889x2 + 0.4741x + 485.6
R² = 0.0546
(500.00000)
-
500.00000
1,000.00000
1,500.00000
2,000.00000
0 5 10 15 20
REF No
T&MM
T&M
Facts
FA
Poly. (T&M)
Poly. (Facts)
Poly. (FA)

26.
Green Energy Mix
• Green energy mix, like all glass mix
has its specified purpose for the
requirement.
• The Manifold arrangement both
scales and times, but the additional
form allows for the cascading
correspondence between the strats
and the illusion of motion is created
by the energy exchange within the
mix.
• The way that energy and motion are
applied to the Mix can power the
vehicular wheels used for
conveyance or production
guidance or motivation systems
• A dual cloud layer is necessary to
cascade various timing (a complex
topic)
GEC
KEY =
111052210
5/26/2022
Brij Consulting, LLC Jean Marshall 26

27.
Green Energy Mix
27
• Wall, Cloud, Sea Shoring
From a specific energy mix and ocean
waves an energy transit wave can deliver
power to a cloud for server driven resources
Requires a Covenant Agreement with the
Morning Star to acquire means and method to
produce
Note
Strats
GEC
-.267+.2659=.110 Thruput

28.
1. Studying T&MM: the requirement for
certification of mobility for competent
conveyances
2. Portal Projects: the evidence, timing and
intelligent use of portals
3. Calling it Green: Calling it Green requires new
uses of potential and ^studies in wave glass
and graphical relationships can raise up a
green energy fluency that will lead to energy
self-sufficiency
Go to https://www.slideshare.net/Marshallja/presentations
See next slides for list of the preceding Remote, Ark and Digital Plait content

29.
Ark Model
V3 and V4
holds all
contents
1. Portfolio Wheels: Study of Secants and Wheels in the Dynamic requirement for Media
to write and produce in Ark Science and Dimensional Systems, Introduction of the
Story “Eru finds a Golden Pen.”
2. Ark Media: The Dialogue of the Story and the Construction of Storyboards, Mix and
Remix specifications, beginning crosswalk and encryptions
3. Builds and Simulations: Discuss Matrix Trees, Migratory Patterns and the use of
Secants to Build tooling
4. The Corner of Mu Sic: an update of our Digital Paper on Mu Sic to include Ark
encryptions and design considerations
5. The Glass House: Magi and Marcus Engineering plans to invest in a Plait Glass facility
for building and research in remote Ark Science. Start of Tooling and Secant Design
for the Construction Industry
6. The Remote Build: Planning a Theoretical Production for untried Architecture
7. Glass Mix Z-Form: Production Walk-Thru Glass Mix and Forms, leads into the Write
Process
8. Bridging the Instance: Now operating multiple instances must bridge the operations,
learn about deciduous models and deliberate the outcome of operations for the 2022
Plan of Magi and Marcus
9. Architectural Builds and Designs: Looking into Delivery Mechanics and the Products
themselves
10. Pipes and Plaits in Ark Mode Design: How the Plait Pipe System assists with Land
Products. See Number Theory
11. Continuous Modeling: Moving away from the Contiguous Model to a strategy of
seamless integration of methods and modes of operation. See Number Theory.
12. The Glass Warehouse: From Start to Finish the streamlined operations of the Marcus
and Magi Engineering remote architectural process
13. Branch- Sound and Image Construction: Characterizing the branch capability of new
applications, appliances and mode[ls] of operations
5/23/2022
29
Branch

30.
30
1. Ark in Glass: Changing the Schema for Ark Mode crossover, beginning study of Secants and
Wheels for the “cube-ified glass” engineering of Imaging, sound and motion characteristics.
2. The New Stone: Simulations and Re-instancing to package, confect and view glass media
3. Dimensional Building: Dimensional Arrays, Z strength, Product Media, Interdimensional
Matrices.
4. The Dynamic Instance: Product Media Discussed
5. The Glass Build: Base Build and Modules Assembled, considering impact of dimensional
systems
6. Glass in the Making: Costing and Loading, Assembly and Assimilation, IP Defined, Logos
7. Art of the Science: What can be made? Assimilation discussed, look at basic product ideas
8. Digital Glass Production: Pipe Transit and RIK Declare, Batch Appliance (Dialogue paper)
9. Imposition of Value Engineering: Establishing and Justifying the Load for Pipe Transit
10. The Digital Plait Position: Engineering Design of the Load and Thruput
11. ^Mu Sic in the Advancing Age: Use of Fingerprint and Encryption for Operational Loads
12. Engineering Objects: The Purpose of this Paper is to Consider the means to raise up a
Digital Portal Production System using appliances gained through Plait Object and Gate
driven configurations that work with Digital Mechanics. Six-Layer Glass and Appliances
13. Instancing at the Gate: Use of Gates and Instances, bridging of the engineering process
14. Interpolative Scope: Use of a Demand and Production Scope for building and delivery of
product, learning to specify material, looking for union of Vector
15. Functional Glass: Fitness for Function and Moral Intelligence, Bayesian Analysis
16. The Glass Wall: This is a very difficult staging of advanced engineering to depict …Motivated by
sound it creates a means by sound to cascade light for safe and wireless power
17. The Glass Wave: Learning to Plait Gates, Reconcile Metrics to Scorecard, and load value of Scrum
18. Scrum Costing w/notes (Book It Daniel): establishing scrum standards (Dialogue paper)
19. Gate Plait Green (Mark It Mark): first scalable plait arrangement overcomes bottleneck
(Dialogue paper)
20. Scorecard Integration (Map It Ralph): A review of mappings to date, marking old vs. new
(Dialogue paper)
Digital Plait Papers with Content
Description (Reverse Order)
5/23/2022