Diese Präsentation wurde erfolgreich gemeldet.
Wir verwenden Ihre LinkedIn Profilangaben und Informationen zu Ihren Aktivitäten, um Anzeigen zu personalisieren und Ihnen relevantere Inhalte anzuzeigen. Sie können Ihre Anzeigeneinstellungen jederzeit ändern.

LO9- Thin Film Interference

657 Aufrufe

Veröffentlicht am

Getting familiar with Thin Film Interference

Veröffentlicht in: Wissenschaft
  • Login to see the comments

LO9- Thin Film Interference

  1. 1. THIN FILM INTERFERENCE LO9 Source: https://figures.boundless.com/16755/full/oil-20slick.jpe
  2. 2. Produces colours of soap bubbles, oil films, peacock feather and some type of butterflies.
  3. 3. Net reflection — (2) and (6). If they are in PHASE, constructive interference will make net reflected ray relatively bright. Unless, destructive interference with no reflection. Source: Nelson Physics for Scientists and Engineers depend Extra distance travelled by light in coating
  4. 4. MINDMAP Phase changes 𝜆n = 𝜆/n index of refraction Wavelength in a medium 1. 180o (hard reflection): medium with greater refraction index. 2. No change (soft): medium with smaller refraction index. 2t= m𝜆n/2 (constructive interference) —————————— t=(2m+1)𝜆n/4 (destructive interference) m=0,1,2,… thickness
  5. 5. CONCEPT CHECK ☑ • n1= 1.50 , n2= 2.00 • In all cases, determine what happened to reflected light when its thickness is approaching zero. Source: Boston University
  6. 6. SOLUTIONS • Case A: ( ✔ ) eliminated by destructive interference ( ) bright by constructive interference • Case B ( ✔ ) eliminated by destructive interference ( ) bright by constructive interference In both cases, light experienced half wavelength shift due to the inverted wave from the bottom of the surface, therefore create destructive interference.
  7. 7. SOLUTIONS • Case C: ( ) eliminated by destructive interference ( ✔ ) bright by constructive interference • Case D: ( ) eliminated by destructive interference (✔ ) bright by constructive interference In case C, wave is inverted all the way therefore no shift in wavelenght. While in case D, neither wave is inverted.
  8. 8. PROBLEM 1 An anti-reflective coat (n= 1.38) is used on a glass surface. a) Find the minimum thickness of the coating that can be used for blue light (480 nm). b) Find the next two possible thickness.
  9. 9. SOLUTION • Visualize • Anti-reflective coating = destructive interference n=1.34 ⟷t
  10. 10. SOLUTION a) 𝜆n = 𝜆/n 𝜆n = 480/1.34 = 358 nm 2t= 𝜆n/2 t = 358/4 = 89.5 nm b) Next two possible conditions, 2t= 3𝜆n/2 2t= 5𝜆n/2 t = 268.5 nm t= 447.5 nm Note:We need extra phase shift of 180o to create constructive interference therefore we need wall thickness of 𝜆n/4, 3𝜆n/4, 5𝜆n/4, and so on.

×