SlideShare a Scribd company logo
1 of 45
BUSINESS
STUDIES
UNIT 2
USING BUDGETS
A budget is a financial plan for the future concerning the
revenues and costs of a business over a given period of
time.
Why are budgets used:
- Establish priorities and sets out targets
- Provides direction
- Assign responsibilities
- Allocate resources
- Delegate without loss of control
- Motivate staff
- Monitor performance
- Control revenues and costs
- Communicate targets
USING BUDGETS
Historical budgeting:
- Using last years figures as a basis for the budget
- Realist and based on actual results
- Circumstances may have changed
- Doesn’t encourage efficiency
Zero-Based Budgeting
- Budgeting costs and revenues are set to zero.
- Budget is based on new proposals for sales and costs
- More time consuming and more complicated
- Potentially more realistic
USING BUDGETS
A variance arises when there is a difference between actual
and budget figures.
Favourable Variances
- Actual figures are better than budgeted
- Costs lower than expected
- Sales higher than expected
Adverse Variances
- Actual figure is worse than budgeted figure
- Costs are higher than expected
- Revenue is lower than expected
USING BUDGETS
Drawbacks and limitations of budgeting:
- Are only as good as the data being used
- Can lead to inflexibility in decision making
- Need to be changed as circumstances change
- Takes time to complete and manage
- Can result in short term decisions to keep within the budget
MEASURING AND INCREASING PROFIT
Profit is financial gain, esp. the difference between the
amount earned and the amount spent in
buying, operating, or producing something.
Why businesses should increase profits:
- Earn better returns for investors
- Stop the business from suffering losses
- Improve internal sources of finance
- Provides a better return on investment
Ways to increase profit:
Sales
Less Variable Costs
Less fixed Costs
Net Profit
Increase quantity or raise selling price
Reduce variable cost per unit
Increase output (economies of scale)
Reduce overheads
MEASURING AND INCREASING PROFIT
Strategies:
Selling more:
+ Higher sales= higher revenues
+ Better use of production capacity
+ Result in higher market share
- Depends on elasticity of demand
- Sales value may fall if price falls
- Can you physically sell more?
- Competitors are likely to respond
- Marketing efforts may fail
- Fixed costs may rise (higher marketing)
MEASURING AND INCREASING PROFIT
Strategies:
Increase selling prices:
+ Higher price=high sales value
+ Customer may perceive product as higher quality
+ No need for extra capacity
- Depends on elasticity of demand
- Number of sales may fall
- Customers have to remain loyal
- Competitors are likely to respond
- Customers may switch to competitors
MEASURING AND INCREASING PROFIT
Strategies:
Increase production:
+ Greater quantity of product to be sold
+ Spread fixed costs over a greater number of units
+ Economies of scale
- Extra output might no be sold
- Business might not have spare capacity
- Fixed costs might rise
- Quality may fall
MEASURING AND INCREASING PROFIT
Strategies:
Reducing fixed costs and overheads
+ Feeds directly to higher profits
+ Reduces breakeven output
+ Potential for substantial savings
- Cutting costs may affect quality
- Might reduce ability of increasing sales
- Intangible costs e.g. redundancies may lead to low morale
IMPROVING CASH FLOW
Main causes of cash flow problems:
- Low profits
- Too much production capacity
- Too much stock
- Allowing customers too much credit
- Growing too fast
- Unexpected changes
- Seasonal demand
IMPROVING CASH FLOW
Ways to improve cashflow:
Short term:
- cut costs
- reduce current assets (stock and debtors)
- increase current liabilities (delay payments)
- sell surplus fixed assets
Medium to long term:
- improve efficiency & productivity
- increase equity finance
- increase long-term liabilities
- reduce spending on fixed assets
IMPROVING CASH FLOW
- Managing cash flow tied up in stocks
- Debt Factoring
- Handling cash flow problems with customers
- Sale of assets
IMPROVING ORGANISATIONAL STRUCTURE
Factors that determine the organisational structure:
 Size of the business
 Type of the business
 Management and leadership style
 The competitive environment
Changing the organisational structure:
+ Growth for the business
+ Reduce costs and complexity
+ Motivate employees
+ Improve customer service
- Manager and employee resistance
- Disruption
- Costs
- Negative impact on quality
IMPROVING ORGANISATIONAL STRUCTURE
Narrow span of control:
- Allows for closer supervision of employees
- More layers may be required
- More effective communication
Wide span of control:
- Gives subordinates the chance of more independence
- More appropriate to reduce labour costs (reduce number of
managers)
IMPROVING ORGANISATIONAL STRUCTURE
Tall hierarchies- many layers of hierarchy and narrow span of
control.
- Allows tighter control
- More opportunities for promotion
- Takes longer for communication through the layers
- More layers=more staff= higher costs
Flat hierarchies- few layers of hierarchy and wide span of control
- Less direct control and more delegation
- Fewer opportunities of promotion but staff have greater
responsibility in their role
- Vertical communication is improved
- Fewer layers=fewer staff=lower costs
IMPROVING ORGANISATIONAL STRUCTURE
Delegation- is the assignment to others of the authority for
particular functions, tasks and decisions.
Advantages:
- Reduces management stress and workload
- Allows senior management to focus on key tasks
- Subordinates are empowered and motivated
- Potentially better use of resources
- Good method of on-the-job training
Disadvantages:
- Cant delegate responsibility
- Depends on the quality or experience of the subordinates
- Harder in a small firm
- May increase workload and stress on the subordinates.
IMPROVING ORGANISATIONAL STRUCTURE
Delayering- involves removing layers of management from the
hierarchy of the organisation
Advantages:
- Lower labour costs
- Faster decision making and communication
- Stimulate employee innovation
Drawbacks:
- Less opportunity for promotion
- De-motivating effect (redundancies)
EFFECTIVENESS OF THE WORKFORCE
Staff Turnover
Percentage of staff who leave during a period
Staff turnover= number of employees leaving during period x100
Average number employed during period
Costs to a business when higher labour turnover:
- High recruitment and training costs
- Increased pressure on remaining staff
- Disruption to production
- Harder to maintain standards of quality
Factors affecting the level:
- Industry practice
- Employee loyalty
- Economic conditions
- Size and ownership of the business
- Financial rewards
- Working conditions
- Recruitment standards
EFFECTIVENESS OF THE WORKFORCE
Labour productivity
Output per employee
Labour productivity= output per period (units)
number of employees at work
Factors affecting the level:
- Quality and extent of fixed assets
- Skills, ability and motivation of the workforce
- Methods of production
- External factors (reliability of suppliers)
Ways to improve:
- Set and measure to targets
- Streamline production
- Invest in equipment
- Invest in employee training
- Make the workplace productive
EFFECTIVENESS OF THE WORKFORCE
Absenteeism
Production of staff who are absent from work
absenteeism= number of staff absent during a period x100
number employed during the period
Factors affecting the level:
- Industry practice
- Employee loyalty
- Economic conditions
- Size and ownership of the business
- Financial rewards
- Working conditions
- Recruitment standards
Ways to improve:
- Understand the causes
- Set targets and monitor trends
- Clear sickness and absence policy
- Provide rewards for good attendance
- Consider the wider issues of employee motivation
RECRUITMENT, SELECTION AND TRAINING
Internal recruitment:
- Jobs are given to staff already employed within the business
- Involves promotion and reorganisation
Advantages:
- Cheaper and quicker to recruit
- People already familiar with the business and how it operates
- Provides opportunities for promotion within the business
Disadvantages:
- Business already knows strengths and weaknesses of candidate
- Limits number of potential applicants
- No new ideas can be introduced from the outside
- May cause resentment from other colleagues
- Creates another vacancy which needs to be filled
RECRUITMENT, SELECTION AND TRAINING
External recruitment:
- Job centres
- Job advertisements
- Recruitment agencies
- Headhunting
- Personal recommendation
Advantages:
- Outside people bring new ideas
- Wider pool of workers to find the best candidate
- People have a wider range of experience
Disadvantages:
- Longer process
- More expensive
- Selection may not be as effective
RECRUITMENT, SELECTION AND TRAINING
On-the-job training- an employee receives training whilst
remaining in the workplace. E.g demonstration, coaching, job
rotation or team projects.
Advantages:
- Generally cost effective
- Employees are actually productive
- Opportunity to learn whilst doing
- Training along side real colleagues
Disadvantages:
- Quality depends on the ability of the trainer and time available
- Bad habits might be passed on
- Learning environment might not be suitable
- Potential disruption to production
RECRUITMENT, SELECTION AND TRAINING
Off-the-job training- An employee receives training away from the
workplace. E.g courses, day release or webinars
Advantages:
- Wider range of skills or qualifications can be obtained
- Can learn from specialists with expertise
- Employees can be more confident
- Motivate employees as the business has spent money on them
Disadvantages:
- More expensive
- Lost working time and potential output
- New employees may still need some induction training
- Employees now have new skills and may leave for better jobs.
RECRUITMENT, SELECTION AND TRAINING
Investment in training:
Advantages:
- Better productivity
- Higher quality
- More flexibility through better skills
- Less supervision required
- Improved motivation (empowerment)
- Better recruitment and employee retention
- Easier to implement change
Disadvantages:
- Poor management may still be a problem
- Poor job design
- Ineffective or inefficient equipment
- Poor production organisation
- Inappropriate recruitment
MOTIVATING EMPLOYEES
Motivation is the will to work, it comes from enjoyment of work
or desire to achieve certain goals.
Methods of motivation:
-financial (eg. Salaries, bonuses)
-non financial (responsibility or praise)
Advantages of a motivated workforce:
- Better productivity
- Better quality and customer service
- Lower levels of absenteeism
- Lower levels of staff turnover
- Lower training and recruitment costs
MOTIVATING EMPLOYEES
Motivational theorists:
- Taylor (scientific management)
- Mayo (human relations management and hawthorne effect)
- Maslow (hierarchy of needs)
- Herzberg (two factor theorem-hygiene+maintenance factors)
- Mcgregor (theory x and y)
- Drucker (importance of objectives)
- Peters (involving employees and
recognising champions)
MOTIVATING EMPLOYEES
Financial incentives to work:
- Wage
- Salaries
- Bonus system
- Commission
- Profit sharing
- Performance related pay
- Share options
- Fringe benefits (eg company car)
MOTIVATING EMPLOYEES
Non- Financial for employees:
- Empowerment
- Praise
- Promotion
- Job enrichment
-more interesting and challenging tasks
-workers get the chance to further themselves
-Herzberg’s approach
- Job enlargement
-giving workers more work of a similar nature
-job rotation
- Better communication
- Working environment
- Team working
OPERATIONAL DECISIONS
Improve efficiency in productivity:
- more training
- Improved motivation
- Better equipment
- Better quality raw materials
- Less wastage
OPERATIONAL DECISIONS
Capacity utilisation- the percentage of total capacity that is actually used or
achieved in a given period.
Capacity is the maximum output that a business can produce in a given
period of with the available resources.
Capacity utilisation= actual output
maximum possible output
Why firms don’t operate at full capacity:
- Low demand
- Increase not used as it is new and recent
- Inefficiency
Problems of working at high capacity utilisation:
- Negative effect on quality
- Employees suffer
- Loss of sales
QUALITY
Quality is the fitness for use, the product/service meets the
needs and expectations of customers which achieves a desired
minimum standard.
Effects of poor quality:
- Loss of customers
- Cost of remaking the product
- Cost of replacements and refunds
- Wasted materials
- Competitors gain customers
Ways to help manage quality:
- Quality circles (groups of employees who discuss the quality)
- Continuous improvement (Kaizen) (continually examining production)
- Benchmarking (using data to compare with industry and practice)
CUSTOMER SERVICE
Customer service- is the way the organisation looks after the
customers.
Why customer service is important:
- Package of benefits that the customer buys
- Way to differentiate the product
- Helps keep loyal customers
- Customers feel valued and recommend
- Source of customer feedback and forgive and tell
- Helps attract and retain employees
CUSTOMER SERVICE
To give good customer service:
- Listen
- Build trust
- Take complaints seriously
- Get it right first time
- Make the most of your staff
- Go the extra mile
WORKING WITH SUPPLIERS
A supplier is a business or individual that provides goods and
services to another business.
A good supplier can improve business competiveness:
- Lower purchase costs
- Better quality
- Improved customer service
- Increased productivity
- More flexible capacity
- Get given trade credit
USING TECHNOLOGY IN OPERATIONS
- Robots
- Stock control
- Automation
- Design software systems
- Communications
Advantages:
- speed, accuracy and efficiency
- Reliable quality and less waste
- Repetitive or hazardous tasks can be done
- Reduces unit cost
Disadvantages:
- up-front investment
- De-motivating for displaced staff
EFFECTIVE MARKETING AND THE MARKETING MIX
Marketing is the process of identifying, anticipating and satisfying customer
needs profitability.
Effective marketing on customers:
- Customers are looking for value
- Are prepared to be loyal
- Their tastes change frequently
Orientations of marketing:
- Production (based on what the business is good at)
- Marketing (business responds to customers needs and wants)
Why segment the market:
- Better matching of customer needs
- Enhanced profits
- Better growth opportunities
- Customer retention
- Target the customers
- Gain share of the market segment
EFFECTIVE MARKETING AND THE MARKETING MIX
Niche marketing is where a business targets a smaller
segment of a larger market, where customers have specific
needs or wants.
+ Less competition
+ Clear focus
+ Builds up specialist skills and knowledge
+ Charge a higher price (profit margins are higher)
+ Loyal customers
- Lack of economies of scale
- Dependent on single market
- Attract competition if successful
- Vulnerable to market change
EFFECTIVE MARKETING AND THE MARKETING MIX
Mass marketing is where a business sells into the largest part
of the market where there are many similar products offered by
competitors.
- Customers form the majority in the market
- Customers needs and wants are more general
- Higher production output
- Success is linked with low cost operation or market leading
brands
PRODUCTS
The product is the most important part of the marketing mix because without
the good product the other elements are less effective
Product life cycle:
-development (expensive and no income)
-introduction (low capacity utilisation)
-growth(start economies of scale)
-maturity (rivals enter the market)
-Decline product loses popularity Product extension
PROMOTION
Promotion is the way in which a business communicates with existing and
potential customers to encourage demand.
What promotion depends on:
-stage in product life cycle
-nature of product
-competition
-marketing budget
-marketing strategy
-target market
Ways of promotion:
- Advertising (paid for)
- Sales promotion (point of sale good for short term)
- Direct marketing (direct mail, email or telephoning)
- Personal selling (meeting with potential customers)
PRICE
Price is the money charged for a product or service.
Factors that affect price:
- Costs of production
- Competitors prices
- Customer perception
- Firms objectives
- Customer demand
- Target market
- Stage in product life cycle
Pricing Methods:
- Price skimming
- Penetration pricing
- Physiological pricing
- Cost plus
- Loss leader
PLACE
Place refers to the way in which a product or service is distributed from the
producer to the final consumer.
Distribution channels move a product from production to consumption.
- Retailers
- Wholesalers
- Distributors
- Agents
Selling direct: (direct mailing or e-commerce)
-retains profit margin
-deals direct with customer
Influencing factors:
- The market
- The business
- The nature of the product
MARKETING AND COMPETITIVENESS
Competitiveness is the ability of a business to deliver better value to
customers than competitors.
Examples: (USP)
- Lower prices
- Better customer service
- Easier access
- Higher quality
- Better design or style
Market structures:
- Perfect competition (homogeneous goods, eg, CDRs)
- Monopolistic (competition producing differentiated goods, eg, restaurants)
- Oligopoly (competition between small number of suppliers, eg, banking)
- Monopoly (Single supplier, eg, water and gas)

More Related Content

What's hot

Unit 2: Excellent revision aid..a must for all students
Unit 2: Excellent revision aid..a must for all studentsUnit 2: Excellent revision aid..a must for all students
Unit 2: Excellent revision aid..a must for all students
mattbentley34
 
Boston matrix
Boston matrixBoston matrix
Boston matrix
hfonfe
 
Business Growth Strategies
Business Growth StrategiesBusiness Growth Strategies
Business Growth Strategies
folaiya
 
Product life cycle: notes & exercise
Product life cycle: notes & exerciseProduct life cycle: notes & exercise
Product life cycle: notes & exercise
mattbentley34
 
Marketing Mix - Place
Marketing Mix - PlaceMarketing Mix - Place
Marketing Mix - Place
tutor2u
 

What's hot (20)

Unit 2: Excellent revision aid..a must for all students
Unit 2: Excellent revision aid..a must for all studentsUnit 2: Excellent revision aid..a must for all students
Unit 2: Excellent revision aid..a must for all students
 
Boston matrix
Boston matrixBoston matrix
Boston matrix
 
Cambridge Topic 1 AS Level - Enterprise
Cambridge Topic 1 AS Level - EnterpriseCambridge Topic 1 AS Level - Enterprise
Cambridge Topic 1 AS Level - Enterprise
 
Class 3 economies of scale
Class 3 economies of scaleClass 3 economies of scale
Class 3 economies of scale
 
Business Growth Strategies
Business Growth StrategiesBusiness Growth Strategies
Business Growth Strategies
 
Pearson Edexcel International A Level Business (431) 1 Growing economies Powe...
Pearson Edexcel International A Level Business (431) 1 Growing economies Powe...Pearson Edexcel International A Level Business (431) 1 Growing economies Powe...
Pearson Edexcel International A Level Business (431) 1 Growing economies Powe...
 
Tutor2u - Income Elasticity of Demand
Tutor2u - Income Elasticity of DemandTutor2u - Income Elasticity of Demand
Tutor2u - Income Elasticity of Demand
 
Product life cycle: notes & exercise
Product life cycle: notes & exerciseProduct life cycle: notes & exercise
Product life cycle: notes & exercise
 
Business size
Business sizeBusiness size
Business size
 
Topic 3 Size of business Cambridge AS and A Level
Topic 3 Size of business Cambridge AS and A LevelTopic 3 Size of business Cambridge AS and A Level
Topic 3 Size of business Cambridge AS and A Level
 
Chpt 07 price promotions
Chpt 07   price promotionsChpt 07   price promotions
Chpt 07 price promotions
 
Porter's Five Forces Model - Analysing Competiton
Porter's Five Forces Model - Analysing CompetitonPorter's Five Forces Model - Analysing Competiton
Porter's Five Forces Model - Analysing Competiton
 
Product Life Cycle (Stages and Extension Strategies)
Product Life Cycle (Stages and Extension Strategies)Product Life Cycle (Stages and Extension Strategies)
Product Life Cycle (Stages and Extension Strategies)
 
Mass versus niche marketing
Mass versus niche marketingMass versus niche marketing
Mass versus niche marketing
 
Measuring business size
Measuring business sizeMeasuring business size
Measuring business size
 
Marketing Mix - Place
Marketing Mix - PlaceMarketing Mix - Place
Marketing Mix - Place
 
Fragmented market
Fragmented marketFragmented market
Fragmented market
 
IGCSE BUSINESS STUDIES Form 4 notes
IGCSE BUSINESS STUDIES Form 4 notesIGCSE BUSINESS STUDIES Form 4 notes
IGCSE BUSINESS STUDIES Form 4 notes
 
Chapter 5 business objectives and stakeholders objectives
Chapter 5 business objectives and stakeholders objectivesChapter 5 business objectives and stakeholders objectives
Chapter 5 business objectives and stakeholders objectives
 
Business strategy
Business strategyBusiness strategy
Business strategy
 

Viewers also liked

Unit 1: Excellent revision aid..a must for all students
Unit 1: Excellent revision aid..a must for all studentsUnit 1: Excellent revision aid..a must for all students
Unit 1: Excellent revision aid..a must for all students
mattbentley34
 
GCSE Sociology - Theoretical approaches
GCSE Sociology - Theoretical approachesGCSE Sociology - Theoretical approaches
GCSE Sociology - Theoretical approaches
Rachel Jones
 
1.introduction to product management
1.introduction to product management1.introduction to product management
1.introduction to product management
dewankur
 

Viewers also liked (12)

New product planning
New product planningNew product planning
New product planning
 
Product & brand management
Product & brand managementProduct & brand management
Product & brand management
 
Unit 1: Excellent revision aid..a must for all students
Unit 1: Excellent revision aid..a must for all studentsUnit 1: Excellent revision aid..a must for all students
Unit 1: Excellent revision aid..a must for all students
 
GCSE Sociology - Theoretical approaches
GCSE Sociology - Theoretical approachesGCSE Sociology - Theoretical approaches
GCSE Sociology - Theoretical approaches
 
Business unit 1
Business unit 1Business unit 1
Business unit 1
 
Revision
RevisionRevision
Revision
 
Unit 1 topic 1 revision
Unit 1 topic 1 revisionUnit 1 topic 1 revision
Unit 1 topic 1 revision
 
1.introduction to product management
1.introduction to product management1.introduction to product management
1.introduction to product management
 
PRODUCT PLANNING
PRODUCT PLANNINGPRODUCT PLANNING
PRODUCT PLANNING
 
Product planning
Product planningProduct planning
Product planning
 
The Art of Product Management
The Art of Product ManagementThe Art of Product Management
The Art of Product Management
 
What is Product Management?
What is Product Management?What is Product Management?
What is Product Management?
 

Similar to Business unit 2

Insead Sales Strategy Case Study
Insead Sales Strategy Case StudyInsead Sales Strategy Case Study
Insead Sales Strategy Case Study
G20Technologies
 
How Collinson Grant helps retailers to maximise operational excellence
How Collinson Grant helps retailers to maximise operational excellenceHow Collinson Grant helps retailers to maximise operational excellence
How Collinson Grant helps retailers to maximise operational excellence
Cheshire East Council
 
ACCA F1/CAT FAB : SECTION B (BUSINESS ORGANISATION, STRUCTURE & STRATEGY)
ACCA F1/CAT FAB : SECTION B (BUSINESS ORGANISATION, STRUCTURE & STRATEGY)ACCA F1/CAT FAB : SECTION B (BUSINESS ORGANISATION, STRUCTURE & STRATEGY)
ACCA F1/CAT FAB : SECTION B (BUSINESS ORGANISATION, STRUCTURE & STRATEGY)
Najihatul Asikin
 
Business architecture business modeling only webinar
Business architecture business modeling only webinarBusiness architecture business modeling only webinar
Business architecture business modeling only webinar
JudithOja_Gillam
 

Similar to Business unit 2 (20)

Insead Sales Strategy Case Study
Insead Sales Strategy Case StudyInsead Sales Strategy Case Study
Insead Sales Strategy Case Study
 
Cost Reduction Toolkit
Cost Reduction ToolkitCost Reduction Toolkit
Cost Reduction Toolkit
 
Sustainment Dominated System (SDS) Life Cycle Affordability
Sustainment Dominated System (SDS) Life Cycle AffordabilitySustainment Dominated System (SDS) Life Cycle Affordability
Sustainment Dominated System (SDS) Life Cycle Affordability
 
Financing the Movement
Financing the MovementFinancing the Movement
Financing the Movement
 
CPA Week 2015 Commercial Acumen Presentation - Kym Williams, BRS
CPA Week 2015 Commercial Acumen Presentation - Kym Williams, BRSCPA Week 2015 Commercial Acumen Presentation - Kym Williams, BRS
CPA Week 2015 Commercial Acumen Presentation - Kym Williams, BRS
 
HRM.pptx
HRM.pptxHRM.pptx
HRM.pptx
 
Growth Toolkit
Growth ToolkitGrowth Toolkit
Growth Toolkit
 
How Collinson Grant helps retailers to maximise operational excellence
How Collinson Grant helps retailers to maximise operational excellenceHow Collinson Grant helps retailers to maximise operational excellence
How Collinson Grant helps retailers to maximise operational excellence
 
ACCA F1/CAT FAB : SECTION B (BUSINESS ORGANISATION, STRUCTURE & STRATEGY)
ACCA F1/CAT FAB : SECTION B (BUSINESS ORGANISATION, STRUCTURE & STRATEGY)ACCA F1/CAT FAB : SECTION B (BUSINESS ORGANISATION, STRUCTURE & STRATEGY)
ACCA F1/CAT FAB : SECTION B (BUSINESS ORGANISATION, STRUCTURE & STRATEGY)
 
Business architecture business modeling only webinar
Business architecture business modeling only webinarBusiness architecture business modeling only webinar
Business architecture business modeling only webinar
 
marketing buss.pptx
marketing buss.pptxmarketing buss.pptx
marketing buss.pptx
 
SCM_Company broshure
SCM_Company broshureSCM_Company broshure
SCM_Company broshure
 
B2B Strategic Account Management - SAM
B2B Strategic Account Management - SAMB2B Strategic Account Management - SAM
B2B Strategic Account Management - SAM
 
Tqm
TqmTqm
Tqm
 
Critical success factors for integrated marketing communications Sept 2013
Critical success factors for integrated marketing communications Sept 2013Critical success factors for integrated marketing communications Sept 2013
Critical success factors for integrated marketing communications Sept 2013
 
strategicaccountmanagement-sam-.pdf
strategicaccountmanagement-sam-.pdfstrategicaccountmanagement-sam-.pdf
strategicaccountmanagement-sam-.pdf
 
Sales startegyyy.pptx
Sales startegyyy.pptxSales startegyyy.pptx
Sales startegyyy.pptx
 
Strategies for Managing Sales Teams: How to find, select and compensate these...
Strategies for Managing Sales Teams: How to find, select and compensate these...Strategies for Managing Sales Teams: How to find, select and compensate these...
Strategies for Managing Sales Teams: How to find, select and compensate these...
 
marketing management
marketing managementmarketing management
marketing management
 
HR Fractional HR Services for the Mid-Market Report
HR Fractional HR Services for the Mid-Market ReportHR Fractional HR Services for the Mid-Market Report
HR Fractional HR Services for the Mid-Market Report
 

Recently uploaded

Salient Features of India constitution especially power and functions
Salient Features of India constitution especially power and functionsSalient Features of India constitution especially power and functions
Salient Features of India constitution especially power and functions
KarakKing
 
Jual Obat Aborsi Hongkong ( Asli No.1 ) 085657271886 Obat Penggugur Kandungan...
Jual Obat Aborsi Hongkong ( Asli No.1 ) 085657271886 Obat Penggugur Kandungan...Jual Obat Aborsi Hongkong ( Asli No.1 ) 085657271886 Obat Penggugur Kandungan...
Jual Obat Aborsi Hongkong ( Asli No.1 ) 085657271886 Obat Penggugur Kandungan...
ZurliaSoop
 
1029 - Danh muc Sach Giao Khoa 10 . pdf
1029 -  Danh muc Sach Giao Khoa 10 . pdf1029 -  Danh muc Sach Giao Khoa 10 . pdf
1029 - Danh muc Sach Giao Khoa 10 . pdf
QucHHunhnh
 
Vishram Singh - Textbook of Anatomy Upper Limb and Thorax.. Volume 1 (1).pdf
Vishram Singh - Textbook of Anatomy  Upper Limb and Thorax.. Volume 1 (1).pdfVishram Singh - Textbook of Anatomy  Upper Limb and Thorax.. Volume 1 (1).pdf
Vishram Singh - Textbook of Anatomy Upper Limb and Thorax.. Volume 1 (1).pdf
ssuserdda66b
 

Recently uploaded (20)

General Principles of Intellectual Property: Concepts of Intellectual Proper...
General Principles of Intellectual Property: Concepts of Intellectual  Proper...General Principles of Intellectual Property: Concepts of Intellectual  Proper...
General Principles of Intellectual Property: Concepts of Intellectual Proper...
 
How to Give a Domain for a Field in Odoo 17
How to Give a Domain for a Field in Odoo 17How to Give a Domain for a Field in Odoo 17
How to Give a Domain for a Field in Odoo 17
 
ICT role in 21st century education and it's challenges.
ICT role in 21st century education and it's challenges.ICT role in 21st century education and it's challenges.
ICT role in 21st century education and it's challenges.
 
Unit-IV- Pharma. Marketing Channels.pptx
Unit-IV- Pharma. Marketing Channels.pptxUnit-IV- Pharma. Marketing Channels.pptx
Unit-IV- Pharma. Marketing Channels.pptx
 
2024-NATIONAL-LEARNING-CAMP-AND-OTHER.pptx
2024-NATIONAL-LEARNING-CAMP-AND-OTHER.pptx2024-NATIONAL-LEARNING-CAMP-AND-OTHER.pptx
2024-NATIONAL-LEARNING-CAMP-AND-OTHER.pptx
 
Basic Civil Engineering first year Notes- Chapter 4 Building.pptx
Basic Civil Engineering first year Notes- Chapter 4 Building.pptxBasic Civil Engineering first year Notes- Chapter 4 Building.pptx
Basic Civil Engineering first year Notes- Chapter 4 Building.pptx
 
Salient Features of India constitution especially power and functions
Salient Features of India constitution especially power and functionsSalient Features of India constitution especially power and functions
Salient Features of India constitution especially power and functions
 
Understanding Accommodations and Modifications
Understanding  Accommodations and ModificationsUnderstanding  Accommodations and Modifications
Understanding Accommodations and Modifications
 
SOC 101 Demonstration of Learning Presentation
SOC 101 Demonstration of Learning PresentationSOC 101 Demonstration of Learning Presentation
SOC 101 Demonstration of Learning Presentation
 
Application orientated numerical on hev.ppt
Application orientated numerical on hev.pptApplication orientated numerical on hev.ppt
Application orientated numerical on hev.ppt
 
FSB Advising Checklist - Orientation 2024
FSB Advising Checklist - Orientation 2024FSB Advising Checklist - Orientation 2024
FSB Advising Checklist - Orientation 2024
 
Jual Obat Aborsi Hongkong ( Asli No.1 ) 085657271886 Obat Penggugur Kandungan...
Jual Obat Aborsi Hongkong ( Asli No.1 ) 085657271886 Obat Penggugur Kandungan...Jual Obat Aborsi Hongkong ( Asli No.1 ) 085657271886 Obat Penggugur Kandungan...
Jual Obat Aborsi Hongkong ( Asli No.1 ) 085657271886 Obat Penggugur Kandungan...
 
Holdier Curriculum Vitae (April 2024).pdf
Holdier Curriculum Vitae (April 2024).pdfHoldier Curriculum Vitae (April 2024).pdf
Holdier Curriculum Vitae (April 2024).pdf
 
Google Gemini An AI Revolution in Education.pptx
Google Gemini An AI Revolution in Education.pptxGoogle Gemini An AI Revolution in Education.pptx
Google Gemini An AI Revolution in Education.pptx
 
On National Teacher Day, meet the 2024-25 Kenan Fellows
On National Teacher Day, meet the 2024-25 Kenan FellowsOn National Teacher Day, meet the 2024-25 Kenan Fellows
On National Teacher Day, meet the 2024-25 Kenan Fellows
 
Explore beautiful and ugly buildings. Mathematics helps us create beautiful d...
Explore beautiful and ugly buildings. Mathematics helps us create beautiful d...Explore beautiful and ugly buildings. Mathematics helps us create beautiful d...
Explore beautiful and ugly buildings. Mathematics helps us create beautiful d...
 
Introduction to Nonprofit Accounting: The Basics
Introduction to Nonprofit Accounting: The BasicsIntroduction to Nonprofit Accounting: The Basics
Introduction to Nonprofit Accounting: The Basics
 
ICT Role in 21st Century Education & its Challenges.pptx
ICT Role in 21st Century Education & its Challenges.pptxICT Role in 21st Century Education & its Challenges.pptx
ICT Role in 21st Century Education & its Challenges.pptx
 
1029 - Danh muc Sach Giao Khoa 10 . pdf
1029 -  Danh muc Sach Giao Khoa 10 . pdf1029 -  Danh muc Sach Giao Khoa 10 . pdf
1029 - Danh muc Sach Giao Khoa 10 . pdf
 
Vishram Singh - Textbook of Anatomy Upper Limb and Thorax.. Volume 1 (1).pdf
Vishram Singh - Textbook of Anatomy  Upper Limb and Thorax.. Volume 1 (1).pdfVishram Singh - Textbook of Anatomy  Upper Limb and Thorax.. Volume 1 (1).pdf
Vishram Singh - Textbook of Anatomy Upper Limb and Thorax.. Volume 1 (1).pdf
 

Business unit 2

  • 2. USING BUDGETS A budget is a financial plan for the future concerning the revenues and costs of a business over a given period of time. Why are budgets used: - Establish priorities and sets out targets - Provides direction - Assign responsibilities - Allocate resources - Delegate without loss of control - Motivate staff - Monitor performance - Control revenues and costs - Communicate targets
  • 3. USING BUDGETS Historical budgeting: - Using last years figures as a basis for the budget - Realist and based on actual results - Circumstances may have changed - Doesn’t encourage efficiency Zero-Based Budgeting - Budgeting costs and revenues are set to zero. - Budget is based on new proposals for sales and costs - More time consuming and more complicated - Potentially more realistic
  • 4. USING BUDGETS A variance arises when there is a difference between actual and budget figures. Favourable Variances - Actual figures are better than budgeted - Costs lower than expected - Sales higher than expected Adverse Variances - Actual figure is worse than budgeted figure - Costs are higher than expected - Revenue is lower than expected
  • 5. USING BUDGETS Drawbacks and limitations of budgeting: - Are only as good as the data being used - Can lead to inflexibility in decision making - Need to be changed as circumstances change - Takes time to complete and manage - Can result in short term decisions to keep within the budget
  • 6. MEASURING AND INCREASING PROFIT Profit is financial gain, esp. the difference between the amount earned and the amount spent in buying, operating, or producing something. Why businesses should increase profits: - Earn better returns for investors - Stop the business from suffering losses - Improve internal sources of finance - Provides a better return on investment Ways to increase profit: Sales Less Variable Costs Less fixed Costs Net Profit Increase quantity or raise selling price Reduce variable cost per unit Increase output (economies of scale) Reduce overheads
  • 7. MEASURING AND INCREASING PROFIT Strategies: Selling more: + Higher sales= higher revenues + Better use of production capacity + Result in higher market share - Depends on elasticity of demand - Sales value may fall if price falls - Can you physically sell more? - Competitors are likely to respond - Marketing efforts may fail - Fixed costs may rise (higher marketing)
  • 8. MEASURING AND INCREASING PROFIT Strategies: Increase selling prices: + Higher price=high sales value + Customer may perceive product as higher quality + No need for extra capacity - Depends on elasticity of demand - Number of sales may fall - Customers have to remain loyal - Competitors are likely to respond - Customers may switch to competitors
  • 9. MEASURING AND INCREASING PROFIT Strategies: Increase production: + Greater quantity of product to be sold + Spread fixed costs over a greater number of units + Economies of scale - Extra output might no be sold - Business might not have spare capacity - Fixed costs might rise - Quality may fall
  • 10. MEASURING AND INCREASING PROFIT Strategies: Reducing fixed costs and overheads + Feeds directly to higher profits + Reduces breakeven output + Potential for substantial savings - Cutting costs may affect quality - Might reduce ability of increasing sales - Intangible costs e.g. redundancies may lead to low morale
  • 11. IMPROVING CASH FLOW Main causes of cash flow problems: - Low profits - Too much production capacity - Too much stock - Allowing customers too much credit - Growing too fast - Unexpected changes - Seasonal demand
  • 12. IMPROVING CASH FLOW Ways to improve cashflow: Short term: - cut costs - reduce current assets (stock and debtors) - increase current liabilities (delay payments) - sell surplus fixed assets Medium to long term: - improve efficiency & productivity - increase equity finance - increase long-term liabilities - reduce spending on fixed assets
  • 13. IMPROVING CASH FLOW - Managing cash flow tied up in stocks - Debt Factoring - Handling cash flow problems with customers - Sale of assets
  • 14. IMPROVING ORGANISATIONAL STRUCTURE Factors that determine the organisational structure:  Size of the business  Type of the business  Management and leadership style  The competitive environment Changing the organisational structure: + Growth for the business + Reduce costs and complexity + Motivate employees + Improve customer service - Manager and employee resistance - Disruption - Costs - Negative impact on quality
  • 15. IMPROVING ORGANISATIONAL STRUCTURE Narrow span of control: - Allows for closer supervision of employees - More layers may be required - More effective communication Wide span of control: - Gives subordinates the chance of more independence - More appropriate to reduce labour costs (reduce number of managers)
  • 16. IMPROVING ORGANISATIONAL STRUCTURE Tall hierarchies- many layers of hierarchy and narrow span of control. - Allows tighter control - More opportunities for promotion - Takes longer for communication through the layers - More layers=more staff= higher costs Flat hierarchies- few layers of hierarchy and wide span of control - Less direct control and more delegation - Fewer opportunities of promotion but staff have greater responsibility in their role - Vertical communication is improved - Fewer layers=fewer staff=lower costs
  • 17. IMPROVING ORGANISATIONAL STRUCTURE Delegation- is the assignment to others of the authority for particular functions, tasks and decisions. Advantages: - Reduces management stress and workload - Allows senior management to focus on key tasks - Subordinates are empowered and motivated - Potentially better use of resources - Good method of on-the-job training Disadvantages: - Cant delegate responsibility - Depends on the quality or experience of the subordinates - Harder in a small firm - May increase workload and stress on the subordinates.
  • 18. IMPROVING ORGANISATIONAL STRUCTURE Delayering- involves removing layers of management from the hierarchy of the organisation Advantages: - Lower labour costs - Faster decision making and communication - Stimulate employee innovation Drawbacks: - Less opportunity for promotion - De-motivating effect (redundancies)
  • 19. EFFECTIVENESS OF THE WORKFORCE Staff Turnover Percentage of staff who leave during a period Staff turnover= number of employees leaving during period x100 Average number employed during period Costs to a business when higher labour turnover: - High recruitment and training costs - Increased pressure on remaining staff - Disruption to production - Harder to maintain standards of quality Factors affecting the level: - Industry practice - Employee loyalty - Economic conditions - Size and ownership of the business - Financial rewards - Working conditions - Recruitment standards
  • 20. EFFECTIVENESS OF THE WORKFORCE Labour productivity Output per employee Labour productivity= output per period (units) number of employees at work Factors affecting the level: - Quality and extent of fixed assets - Skills, ability and motivation of the workforce - Methods of production - External factors (reliability of suppliers) Ways to improve: - Set and measure to targets - Streamline production - Invest in equipment - Invest in employee training - Make the workplace productive
  • 21. EFFECTIVENESS OF THE WORKFORCE Absenteeism Production of staff who are absent from work absenteeism= number of staff absent during a period x100 number employed during the period Factors affecting the level: - Industry practice - Employee loyalty - Economic conditions - Size and ownership of the business - Financial rewards - Working conditions - Recruitment standards Ways to improve: - Understand the causes - Set targets and monitor trends - Clear sickness and absence policy - Provide rewards for good attendance - Consider the wider issues of employee motivation
  • 22. RECRUITMENT, SELECTION AND TRAINING Internal recruitment: - Jobs are given to staff already employed within the business - Involves promotion and reorganisation Advantages: - Cheaper and quicker to recruit - People already familiar with the business and how it operates - Provides opportunities for promotion within the business Disadvantages: - Business already knows strengths and weaknesses of candidate - Limits number of potential applicants - No new ideas can be introduced from the outside - May cause resentment from other colleagues - Creates another vacancy which needs to be filled
  • 23. RECRUITMENT, SELECTION AND TRAINING External recruitment: - Job centres - Job advertisements - Recruitment agencies - Headhunting - Personal recommendation Advantages: - Outside people bring new ideas - Wider pool of workers to find the best candidate - People have a wider range of experience Disadvantages: - Longer process - More expensive - Selection may not be as effective
  • 24. RECRUITMENT, SELECTION AND TRAINING On-the-job training- an employee receives training whilst remaining in the workplace. E.g demonstration, coaching, job rotation or team projects. Advantages: - Generally cost effective - Employees are actually productive - Opportunity to learn whilst doing - Training along side real colleagues Disadvantages: - Quality depends on the ability of the trainer and time available - Bad habits might be passed on - Learning environment might not be suitable - Potential disruption to production
  • 25. RECRUITMENT, SELECTION AND TRAINING Off-the-job training- An employee receives training away from the workplace. E.g courses, day release or webinars Advantages: - Wider range of skills or qualifications can be obtained - Can learn from specialists with expertise - Employees can be more confident - Motivate employees as the business has spent money on them Disadvantages: - More expensive - Lost working time and potential output - New employees may still need some induction training - Employees now have new skills and may leave for better jobs.
  • 26. RECRUITMENT, SELECTION AND TRAINING Investment in training: Advantages: - Better productivity - Higher quality - More flexibility through better skills - Less supervision required - Improved motivation (empowerment) - Better recruitment and employee retention - Easier to implement change Disadvantages: - Poor management may still be a problem - Poor job design - Ineffective or inefficient equipment - Poor production organisation - Inappropriate recruitment
  • 27. MOTIVATING EMPLOYEES Motivation is the will to work, it comes from enjoyment of work or desire to achieve certain goals. Methods of motivation: -financial (eg. Salaries, bonuses) -non financial (responsibility or praise) Advantages of a motivated workforce: - Better productivity - Better quality and customer service - Lower levels of absenteeism - Lower levels of staff turnover - Lower training and recruitment costs
  • 28. MOTIVATING EMPLOYEES Motivational theorists: - Taylor (scientific management) - Mayo (human relations management and hawthorne effect) - Maslow (hierarchy of needs) - Herzberg (two factor theorem-hygiene+maintenance factors) - Mcgregor (theory x and y) - Drucker (importance of objectives) - Peters (involving employees and recognising champions)
  • 29. MOTIVATING EMPLOYEES Financial incentives to work: - Wage - Salaries - Bonus system - Commission - Profit sharing - Performance related pay - Share options - Fringe benefits (eg company car)
  • 30. MOTIVATING EMPLOYEES Non- Financial for employees: - Empowerment - Praise - Promotion - Job enrichment -more interesting and challenging tasks -workers get the chance to further themselves -Herzberg’s approach - Job enlargement -giving workers more work of a similar nature -job rotation - Better communication - Working environment - Team working
  • 31. OPERATIONAL DECISIONS Improve efficiency in productivity: - more training - Improved motivation - Better equipment - Better quality raw materials - Less wastage
  • 32. OPERATIONAL DECISIONS Capacity utilisation- the percentage of total capacity that is actually used or achieved in a given period. Capacity is the maximum output that a business can produce in a given period of with the available resources. Capacity utilisation= actual output maximum possible output Why firms don’t operate at full capacity: - Low demand - Increase not used as it is new and recent - Inefficiency Problems of working at high capacity utilisation: - Negative effect on quality - Employees suffer - Loss of sales
  • 33. QUALITY Quality is the fitness for use, the product/service meets the needs and expectations of customers which achieves a desired minimum standard. Effects of poor quality: - Loss of customers - Cost of remaking the product - Cost of replacements and refunds - Wasted materials - Competitors gain customers Ways to help manage quality: - Quality circles (groups of employees who discuss the quality) - Continuous improvement (Kaizen) (continually examining production) - Benchmarking (using data to compare with industry and practice)
  • 34. CUSTOMER SERVICE Customer service- is the way the organisation looks after the customers. Why customer service is important: - Package of benefits that the customer buys - Way to differentiate the product - Helps keep loyal customers - Customers feel valued and recommend - Source of customer feedback and forgive and tell - Helps attract and retain employees
  • 35. CUSTOMER SERVICE To give good customer service: - Listen - Build trust - Take complaints seriously - Get it right first time - Make the most of your staff - Go the extra mile
  • 36. WORKING WITH SUPPLIERS A supplier is a business or individual that provides goods and services to another business. A good supplier can improve business competiveness: - Lower purchase costs - Better quality - Improved customer service - Increased productivity - More flexible capacity - Get given trade credit
  • 37. USING TECHNOLOGY IN OPERATIONS - Robots - Stock control - Automation - Design software systems - Communications Advantages: - speed, accuracy and efficiency - Reliable quality and less waste - Repetitive or hazardous tasks can be done - Reduces unit cost Disadvantages: - up-front investment - De-motivating for displaced staff
  • 38. EFFECTIVE MARKETING AND THE MARKETING MIX Marketing is the process of identifying, anticipating and satisfying customer needs profitability. Effective marketing on customers: - Customers are looking for value - Are prepared to be loyal - Their tastes change frequently Orientations of marketing: - Production (based on what the business is good at) - Marketing (business responds to customers needs and wants) Why segment the market: - Better matching of customer needs - Enhanced profits - Better growth opportunities - Customer retention - Target the customers - Gain share of the market segment
  • 39. EFFECTIVE MARKETING AND THE MARKETING MIX Niche marketing is where a business targets a smaller segment of a larger market, where customers have specific needs or wants. + Less competition + Clear focus + Builds up specialist skills and knowledge + Charge a higher price (profit margins are higher) + Loyal customers - Lack of economies of scale - Dependent on single market - Attract competition if successful - Vulnerable to market change
  • 40. EFFECTIVE MARKETING AND THE MARKETING MIX Mass marketing is where a business sells into the largest part of the market where there are many similar products offered by competitors. - Customers form the majority in the market - Customers needs and wants are more general - Higher production output - Success is linked with low cost operation or market leading brands
  • 41. PRODUCTS The product is the most important part of the marketing mix because without the good product the other elements are less effective Product life cycle: -development (expensive and no income) -introduction (low capacity utilisation) -growth(start economies of scale) -maturity (rivals enter the market) -Decline product loses popularity Product extension
  • 42. PROMOTION Promotion is the way in which a business communicates with existing and potential customers to encourage demand. What promotion depends on: -stage in product life cycle -nature of product -competition -marketing budget -marketing strategy -target market Ways of promotion: - Advertising (paid for) - Sales promotion (point of sale good for short term) - Direct marketing (direct mail, email or telephoning) - Personal selling (meeting with potential customers)
  • 43. PRICE Price is the money charged for a product or service. Factors that affect price: - Costs of production - Competitors prices - Customer perception - Firms objectives - Customer demand - Target market - Stage in product life cycle Pricing Methods: - Price skimming - Penetration pricing - Physiological pricing - Cost plus - Loss leader
  • 44. PLACE Place refers to the way in which a product or service is distributed from the producer to the final consumer. Distribution channels move a product from production to consumption. - Retailers - Wholesalers - Distributors - Agents Selling direct: (direct mailing or e-commerce) -retains profit margin -deals direct with customer Influencing factors: - The market - The business - The nature of the product
  • 45. MARKETING AND COMPETITIVENESS Competitiveness is the ability of a business to deliver better value to customers than competitors. Examples: (USP) - Lower prices - Better customer service - Easier access - Higher quality - Better design or style Market structures: - Perfect competition (homogeneous goods, eg, CDRs) - Monopolistic (competition producing differentiated goods, eg, restaurants) - Oligopoly (competition between small number of suppliers, eg, banking) - Monopoly (Single supplier, eg, water and gas)