Crane Knowledge for Lawyers Outlines: Crane Identification

Crane
Knowledge
For
Lawyers
Outlines Series
Outline #1: Crane Identification
By:
D. Larry Dunville
www.OverheadCraneConsulting.com

LawyerOutline1r3
1.1. Different Crane Types
There are many distinct and different types of cranes.
1.2. Different Regulations
Each configuration has its own governing bodies, specifications and OSHA requirements.
1.3. Precise Identification Required
The precise and correct identification is required in order to then identify the appropriate regulations.
1. Crane is a generic term
2.1. Overhead Cranes
2.2. Gantry Cranes
2.3. Jib Cranes
2.4. Mobile Cranes
2.5. Tower/Construction Cranes
2.6. Container Cranes
2.7. Stacker Cranes
2. Seven Families of Cranes (Overview)
There are seven major families of crane products and many minor products too.
04/16/16 LawyerOutline#1.pdf Page 1 of 28
D. Larry Dunville www.OverheadCraneConsulting.com
Larry.Dunville@gmail.com
(574) 210-8612

3.1. Each crane type is a different industry
3.2. Each crane type has a different industry association
3.3. Each industry association has a different product specifications
3.4. Each crane type has a different ANSI/ASME specifications
3.5. Each crane type has different OSHA regulations
3.6. Each crane type has different operator training/certification requirements
3. Is this a “difference without a distinction?”
NO! The difference is critical to preparing a legal case
4. Disclaimer
This paper was meant to be a short outline, a brief overview of cranes. Even after extreme editing, it’s still 31
pages long! I continually had to remind myself, that in order to keep this to a reasonable length, I could only
address the mainstream products and options. There are a near infinite number of options and exceptions,
which is why I frequently couched my observation with hedge words like “usually” and “most of the time.” My
observations pertain to that segment of the market that resides in the fat part of the bell curve.
If this leads to confusion, please feel free to call me and I will be glad to explain extraneous parameters that
for the sake of brevity, I had to leave out of this paper.
D. Larry Dunville
(574) 210-8612
www.OverheadCraneConsulting.com
(574) 210-8612

(a) Overhead Cranes
(most common US usage)
(b) Bridge Cranes
(c) Overhead Bridge Cranes
(d) Electric Overhead Traveling (EOT) Cranes
(common European usage)
5.1.1.1) Overhead Crane (synonyms)
These terms are used interchangeably and mean exactly the same thing.
5.1.1.2) Operational Terminology
There will be a separate document in this series involved with the primary vocabulary in the
industry, but I have included these two terms here because they are frequently used by those
not experienced in the industry as synonyms and they are NOT. It’s important to understand
the difference.
5.1.1. Nomenclature
There are a few terms that we have to clarify. That includes the synonyms for the term Overhead
Crane and the difference between Crane and Hoist.
5.1. CRANE TYPE #1: Overhead Cranes
5. Seven Crane Types (Detailed Drill Down By Crane Type)
(574) 210-8612

(a) Overhead Crane
The overhead crane is the whole device consisting of three components, 1) a hoist, 2) a bridge
girder and 3) end-trucks. The crane provides the support structure and lateral motions. In most
pictures, the crane is the “Alert Yellow” assembly.
(b) Hoist
The hoist is the piece of machinery, mounted on the crane, that does the lifting. In other words,
the vertical motion. The horizontal motions are accomplished by the crane and trolley. The
terms hoist and crane and NOT interchangeable terms.
(574) 210-8612

a) Hand-push/Work Station Cranes
b) Structural/Stick Cranes
c) Fabricated Girder Cranes
5.1.2. Overhead Crane sub groups
(a) Enclosed Track Workstation Cranes
The enclosed track workstation crane is characterized by an internal to the track rolling surface.
5.1.3.1) Overhead Crane Sub-group #1 Configurations
There are three types of hand push cranes
5.1.3. OVERHEAD CRANE SUB-GROUP #1: Hand-push/Workstation Cranes
These are called “workstation” cranes because they usually service a single operator workstation.
They are typically used for light loads, but more than a man can handle. They are frequently
assembly workstations with operations that don’t require horizontal motorization, but will more
often then not be equipped with an electric or air hoist for motorized vertical motion.
Each of these cranes are functionally identical and are only differentiated by the material used for
the bridge girder. I’ve called them out separately because each involve a different industry
association and therefore a different ANIS/ASME specification.
(574) 210-8612

(b) I-Beam Hand Push Cranes
The I-Beam crane is simply a function of being built with an AISC structural I-Beam section.
(c) Patented Track Hand Push Cranes
The Patented track crane is also a function of the special “Patented Track” beam used in i-s
construction.
(a) Typically, no operator training required
(b) Low cost, pre-engineered product
(c) Usually well under $10k
(d) Usually under 3-ton capacity and under 20 ft. span (width)
(e) Hundreds of vendors and frequently “home-made”
5.1.3.2) Characteristics of all Hand-push/Workstation Cranes
(574) 210-8612

(a) Structural, I-Beam/Wide Flange Beam Cranes
(b) Patented Track Beam Cranes
(a) Operator training requirement dependent on company safety policy
Note, some states are moving to require an operator’s license. I will include a list of the states in
a future update of this document.
(b) Pre-engineered product, usually $10k to $50k price
(c) Single and double girder configuration
(d) Usually 5 to 30-ton capacity and up to 60 ft. span (width)
(e) Well over a hundred vendors across the US
5.1.4.2) Characteristics of Structural/Stick Cranes
5.1.4. OVERHEAD CRANE SUB-GROUP #2: Structural/Stick Cranes
This sub-group is again characterized by the type of bridge girder used to build the crane. As
above, they girder type dictates the manufacturers association and therefore the ANSI/ASME
specification.
(574) 210-8612

(a) Welded Plate Box Girder Cranes
Welded plate box girders are the current “state of the art” configuration for heavy capacity, long
span cranes.
(b) Channel Box Girder Cranes
Channel box girders are an old and seldom used configuration. They are a combination of a top
and bottom structural channel welded together with plate steel webs to form a box. They are so
rare, that I can’t find a picture or drawing.
(c) Formed Plate Girder Cranes
Over the years, various manufacturers have experimented with forming plate steel into a
structural shape, minimizing the amount of welding, thereby lowering manufacturing costs.
There are three members of this group of which the first, welded plate box girders, is
overwhelming the majority being built.
(a) Operator training dependent on company safety policy
(b) Engineered product, usually $50k to $250k
(c) Single and double girder configuration, usually double
(d) Usually 30 to 500-ton capacity and usually spans longer than 40 feet
5.1.5.2) Characteristics of Fabricated Girder Cranes
5.1.5. OVERHEAD CRANE SUB-GROUP #3: Fabricated Girder Cranes
(574) 210-8612

(e) A couple dozen vendors across the US
(574) 210-8612

a) Engineered Industrial Gantry Crane
b) Pre-Engineered/Portable Gantry Cranes
c) RTG (rubber tired) Gantry Cranes
5.2.1. Gantry Crane sub-groups
() Engineered Gantry Crane
5.2.2.1) Engineered Industrial Gantry Crane Configurations
5.2.2. GANTRY CRANE SUB-GROUP #1: Engineered Industrial Gantry Crane
5.2. CRANE TYPE #2: Gantry Cranes
Gantry Cranes are closely related to Overhead Cranes in most respects. The primary difference is that
the gantry crane runway is usually located at or near ground level. Therefore, the floor is supporting the
gantry crane rather than the building structure.
(574) 210-8612

() Single Leg Configuration Gantry Crane
(574) 210-8612

() Double Leg Configuration Gantry Crane
(1) Operator training dependent on company safety policy
(2) Custom engineered product, usually well over $50k to $250k
(3) Single leg and double leg configuration
(4) Motorized in all directions
5.2.2.2) Characteristics of Engineered Industrial Gantry Cranes
5.2.3.1) Pre-Engineered/Portable Gantry Crane Configurations
Pre-engineered products are have been standardized and reduced to a part number in a
catalog.
5.2.3. GANTRY CRANE SUB-GROUP #2: Pre-Engineered/Portable Gantry
Cranes
(574) 210-8612

(a) Fix Portable Gantry Crane
Fixed Gantry Cranes are sold as a fixed height and width.
(b) Adjustable Portable Gantry Crane
Adjustable Gantry Cranes can be altered in height and/or width, by adjustment with simple
hand tools.
(b) Pre-engineered, catalog product
(c) Operationally, Gantry Cranes can be fixed location or mounted on casters
(d) Only double leg configuration
(e) Usually hand push, but sometimes motorized in all directions
5.2.3.2) Characteristics of Pre-Engineered/Portable Gantry Cranes
(574) 210-8612

(a) Single Girder
(b) Double Girder
5.2.4.1) RTG (rubber tired) Gantry Cranes Configuration
(a) Operator training dependent on company safety policy
(b) Custom engineered product, usually over $100k
(c) Double leg configuration only
(d) Motorized in all directions and steerable
(e) Usually outdoor service, commonly used in multimodal shipping facilities for
container handling
5.2.4.2) Characteristics of RTG (rubber tired) Gantry Cranes
5.2.4. GANTRY CRANE SUB-GROUP #3: RTG (rubber tired) Gantry Cranes
(574) 210-8612

(a) Floor Mounted Jib Cranes
Floor mounted Jib Cranes almost always require a footing, engineered to size and properly
anchored in order to prevent toppling under load.
5.3.1.1) Pre-Engineered
These are pre-engineered, standardized, catalog products.
5.3.1. Jib Crane sub-groups
5.3. CRANE TYPE #3: Jib Cranes
Jib Cranes are low cost solutions for workstation level material handling problems.
(574) 210-8612

(b) Wall Mounted Jib Cranes
The term “wall mounted” is really a misnomer. Actually, the wall mounted Jib Crane must be
mounted to a building column of adequate size to structurally accept the loading.
(a) Non-standard Floor Mounted Jib Cranes
Jib Cranes over 5-ton capacity and/or over 25 ft. reach are normally custom engineered
products.
(b) Non-standard Wall Mounted Jib Cranes
Jib Cranes over 5-ton capacity and/or over 25 ft. reach are normally custom engineered
products.
(c) Traveling Jib Cranes
Traveling Jib Cranes are a unique idea, but costly to buy and need a special building to accept
the loadings incurred. As a result, they are very rare. I’ve only seen a handful of them in over 35
years in the overhead crane business.
5.3.1.2) Custom Engineered
(574) 210-8612

(b) Low cost, pre-engineered product, usually under $10k
(c) Usually under 5-ton capacity
(d) A couple dozen US manufacturers
5.3.2.1) Wall Mount Jib Crane Characteristics
(b) Low cost, pre-engineered product, usually under $10k
(d) A couple dozen US manufacturers
5.3.2.2) Floor Mount Jib Crane Characteristics
(b) Custom engineered product, usually over $50k
(d) Very few manufacturers and a very rare product
5.3.2.3) Traveling Wall Jib Crane Characteristics
5.3.2. Jib Crane Characteristics
(574) 210-8612

(a) All Terrain
(b) Rubber Tired
5.4.1.1) Lattice Boom Mobile Cranes
(a) All Terrain
(b) Rubber Tired
5.4.1.2) Hydraulic Mobile Crane
5.4.1. Mobile Crane Sub-Groups
The Mobile Crane classification is both huge a near infinite numbers of configurations. In an
attempt to simplify the Mobile market place, I’ve attempted to reduce the options to a 2x2 matrix.
This may be an over simplification, but this paper would grow to a book if I included all the possible
options.
5.4. CRANE TYPE #4: Mobile Cranes
(574) 210-8612

a) Certified Operator Training, OSHA mandated
b) Standardized product
c) Crane boom is assembled and erected at the job site
d) Available in both rubber tire and crawler track configurations
5.4.2. Lattice Boom Mobile Crane Characteristics
a) Certified Operator Training, OSHA mandated
b) Standardized product
c) Crane boom requires no assembly in the field, but lower block rigging may be field
modified
d) Available in both rubber tire and crawler track configurations
5.4.3. Hydraulic Boom Mobile Crane Characteristics
(574) 210-8612

a) Fixed Tower/Construction Cranes
The base is non-moving, but a rotating or slewing ring is located beneath the jib.
5.5.1. Mobile Crane Sub-Groups
5.5. CRANE TYPE #5: Tower/Construction Cranes
This section is included only to help the reader in crane identification. I have no experience in this
portion of the crane world and have included only the most basic information.
(574) 210-8612

b) Slewing Tower/Construction Cranes
The slewing ring is located at the base and the entire assembly rotates.
a) Certified Operator Training, OSHA Mandated
b) Standardized Product
5.5.2. Tower/Construction Cranes Characteristics
(574) 210-8612

a) High Profile Container Cranes
High profile, where the boom is hinged at the waterside of the crane structure and lifted in the air to
clear the ships for navigation.
b) Low Profile Container Cranes
Low profile, where the boom is shuttled toward and over the ship to allow the trolley to load and
discharge containers. Low-profile cranes are used where they may be in the flight path of aircraft,
i.e. where a container terminal is located close to an airport
5.6.1. Container Crane Sub-Groups
5.6. CRANE TYPE #6: Container Cranes
(574) 210-8612

a) Engineered AS/RS (auto storage/retrieval system) Stacker Cranes
b) Pre-Engineered Manual Stacker Cranes
5.7.1. Stacker Crane Sub-Groups
a) Engineered AS/RS Stacker Crane
These are highly complex, usually computerized, large scale, storage and retrieval systems. Costing
in the millions of dollars.
5.7.2. Stacker Crane Characteristics
Although functionally similar, these are two products at the opposite end of the cost and complexity
spectrum.
5.7. CRANE TYPE #7: Stacker Cranes
(574) 210-8612

() Engineered AS/RS Stacker Crane
(574) 210-8612

b) Pre-Engineered Manual Stacker Cranes
These are standard, “off the shelf,” pre-engineered, small scale, manually operated systems.
(574) 210-8612

6.1. The term Crane is a generic term
It’s so diversely used that it’s almost useless.
6.2. Use this paper and/or consult an expert
Be absolutely sure you’re using the correct nomenclature, the correct ANSI/ASME specification and
likewise the correct section of the OSHA regsulations. If you not sure, feel free to call me.
6. Conclusion
(574) 210-8612

. My Name: D. Larry Dunville
. Company: President, Overhead Crane Consulting, LLC
1. Specification writing, proposal evaluation and vendor approval drawing review
2. Crane safety training and corporate safety programs
3. Expert Witness, related to Overhead Cranes, Jib Cranes, Gantry Cranes, Monorails, Hoists and Mobile
Cranes
. Specialization: Overhead Crane Consulting specialized in;
. Phone: (574) 210-8612
. Website: www.OverheadCraneConsulting.com
. Email: Larry.Dunville@gmail.com
. Location: Tucson, AZ and Sawyer, MI
7. About Me
For over 35 years, I was the owner of Dearborn Crane & Engineering Co. I sold Dearborn in 2012 and started
Overhead Crane Consulting, LLC in 2016. Please take a look at my website for further details.
(574) 210-8612

1. Crane Governing Bodies/Specifications List
A detailed listing of the governing bodies, industry specification, ANSI/ASME spec listing and appropriate
OSHA sections. All segmented by crane type.
This listing will include spec titles and association contact information.
2. Essential Terminology/Pictionary
This will be a picture dictionary of the essential terms. The intent is to make a tool that a lawyer and client
can each point to, thereby confirming agreement on the object in question and proper nomenclature in the
legal write-up.
3. Long form Industry Glossary
This will be an exhaustive listing of crane industry terminology annotated with the sources of the
definitions.
1. Overhead Cranes
2. Gantry Cranes
3. Jib Cranes
4. Mobile Cranes
4. In-depth Outlines
8. Up Coming: Cranes for Lawyers Outline Series
(574) 210-8612

Crane Knowledge for Lawyers Outlines: Crane Identification

Empfohlen

Empfohlen

Weitere ähnliche Inhalte

Andere mochten auch

Andere mochten auch (12)

Ähnlich wie Crane Knowledge for Lawyers Outlines: Crane Identification

Ähnlich wie Crane Knowledge for Lawyers Outlines: Crane Identification (20)

Kürzlich hochgeladen

Kürzlich hochgeladen (20)

Crane Knowledge for Lawyers Outlines: Crane Identification