1. Kwok Y. Fung
26979 Grajuelo Drive Valencia CA 91354
Phone: (408) 329-2055, E-Mail: kyinfung @gmail.com
https://www.linkedin.com/pub/kwok-yin-fung/73/8a4/49b
Manufacturing & Process Engineer
Versatile and highly competent manufacturing engineering professional possessing more than 20 years of experience
in directing quality assurance initiatives and in process management. A keen planner & implementer with demonstrated
abilities in setting-up & ensuring smooth functioning of large manufacturing units and enhancing operational efficiency
by making use of leading edge technologies. Proficient in devising significant solutions – SPC, managing day-to-day
manufacturing operations for making effective utilization of man, machine, method & materials. Possesses solid
management skills and the ability to analyze issues, devise continuous process improvements and incorporate
initiatives to increase efficiency, streamline operations and decrease overall expenses with minimal resources.
~ Holds the distinction of reinstating the SPC system to reduce the waste and improve yield; setup the system
for every product that reduced the scrap rate by a significant amount at Aerospace Dynamics International, Inc. ~
~ Championed in increasing the yield by identifying defect root cause; successfully instituted statistical
method to evaluate engineering process ~
~ Deftly coordinated with cross department team to build prototype and sample during company start up; also
set up the laboratory operations from scratch at Kaifa Magnetics ~
SKILL AREAS: Statistics Process Control Engineering  Manufacturing & Production Process  Quality Assurance 
Operations Management  Waste Elimination  Failure Mode Analysis  Root Cause Identification  Process
Improvements  ISO9000 Standards  Key Project Management  Cost Savings / Value Engineering  Lean & Six
Sigma Implementation  Multitasking in Fast-paced Environments  Highly Organized & Strong Analytical Abilities 
Articulate Oral & Written Communication  Quick Problem Resolution & Decision Making  Client Relationship
Management  Team Building, Training & Development
PROFESSIONAL EXPERIENCE
AEROSPACE DYNAMICS INTERNATIONAL, INC., VALENCIA, CA (Mar 2015 – Present)
Statistical Process Control Engineer
It is an aerospace components manufacturer with over 600 employees.
Responsible for planning & establishing the SPC---Statistical Process Control system. Also accountable for identifying &
reporting any discrepancy, collecting data to calculate process capability, etc.
 Actively involved in:
o Creating work instruction for the SPC process
o Training Operators on how to operate with the SPC Software as well as Engineers on how to
navigate within the SPC software and how to interpret the data
o Generating & maintaining report to management level to give a picture of overall yield and fallout
 Efficiently & effectively reinstated the SPC system to reduce the waste and improve yield; setup the system
for every product that reduced the scrap rate by a significant amount
KAIFA MAGNETICS, SHENZHEN, GUANGDONG, PR CHINA (Jan 1997 – Nov 2012)
Failure Analysis Manager
With a team of 2500 employees; it’s a hard disk substrate manufacturer.
Accountable for overseeing the laboratory operations in addition to orchestrating a department of 40 people with
extensive experience in failure analysis and process management.
 Played a vital role in setting up monitoring system in production line to monitor yield at certain inspection points and
set low yield alarm level
 Deftly:
Page 1

2. Kwok Y. Fung
Phone: (408) 329-2055, E-Mail: kyinfung@gmail.com
https://www.linkedin.com/pub/kwok-yin-fung/73/8a4/49b
o Increased yield by identifying defect root cause
o Instituted statistical method to evaluate engineering process
o Devised specific analysis and methods within the department for uncommon situations
 Successfully set up work instructions & procedures and maintained up-to-date technology of the laboratory
 Significantly led cross department team to build prototype and sample during company start up; also set
up the laboratory operations from scratch
 Contributed towards producing 100k parts per day with selling price of $2.00
PHASE METRICS, FREMONT, CA (Nov 1995 – Jan 1997)
Application Engineer
A manufacturer of testing equipment for the hard disk drive industry with 500 employees.
Responsible for monitoring the daily issues regarding customer request as well as manufacturing issue.
 Worked in close relation with Design Engineers, Manufacturing Engineers and Customers on product
improvement at design stage
 Essayed a stellar role in performing on-site system evaluation and validation at customers site
 Efficiently maintained close relationship with customers to address all technical issues and initiate preliminary
solutions;
o Communicated with customers and provided technical support on their special request on the tester
o Pivotal in setting up and validating testers at customers site
PREVIOUS EMPLOYMENT HISTORY
Kaifa Technology, Santa Clara, CA Aug 1992 – Nov 1995
Application Engineer (Apr 1994 – Nov 1995)
Project Engineer (Aug 1992 – Apr 1994)
Trans Savanna Trading Company, Hong Kong MM 1991 – MM 1992
Service Engineer
PROFESSIONAL DEVELOPMENT & CREDENTIALS
M.A.Sc. in Aerospace Engineering 1990
University of Toronto, Toronto, ON
B.A.Sc. in Mechanical Engineering 1985
University of Ottawa, Ottawa, ON
Publication: Numerical Smoothing Techniques for Viscous Layer Flows, Master Thesis - University of Toronto,
Ontario: 1990
Award / Honor: University of Toronto Open Scholarship: 1986
Technical Skills: Microsoft Office Suite, MiniTab, Fortran, C, C++, Pascal.
Page 2