cloud computing notes for anna university syllabus
Loading & Glazing
1. Mr. Ketan K. Devadhara
Mechanical Engineering
DepartmentIn 2005,A Vallabh Budhi Polytechnic has been started in the field of Engineering &
Technology as per guidelines of (AICTE) All India Council for Technical Education, New
Delhi and Gujarat Technological University,Ahmedabad.
VALLABH BUDHI POLYTECHNIC, NAVSARI-655
Facebook.com/vbp655
CIVIL
Engineering
COMPUTER
Engineering
ELECTRICA
LEngineering
MECHANIC
ALEngineering
9409749547 dec655owner@gtu.edu.in
NPPE Campus, Bhanunagar, Eru-Aat Road ,Ta. Jalalpore, Di. Navsari.Pin:396445, Gujarat, India
I/c Head of Department
4. V.B.POLYTECHNIC, NAVSARI. (655) MECHANICAL ENGG. DEPARTMENT
LOADING: When the material of the work piece is filled the gap between the abrasive
grain then it is called as loading. It prevent the wheel from cutting freely.
REASONS:
Use of hard grade wheel
Soft workpiece material
Slow cutting speed
Fast cut
Deep cut
5. V.B.POLYTECHNIC, NAVSARI. (655) MECHANICAL ENGG.
DEPARTMENT
GLAZING: A glazed wheel occurs when the abrasive grains are dull. The cutting surface of
the wheel appears shiny. It is a condition in which cutting edge take glass-
like appearance.
REASONS:
Use too hard wheel
Hard workpiece material
High wheel speed
Absence of cutting fluid
6. V.B.POLYTECHNIC, NAVSARI. (655) MECHANICAL
ENGG. DEPARTMENT
TRUEING: Trueing is called the process of changing the shape of the wheel.
This is done to make tool true and concentric with its center. It can be done
on the new or on the used wheel.
REASONS:
Soft workpiece material
Use of too hard wheel
Slow cutting speed
7. V.B.POLYTECHNIC, NAVSARI. (655) MECHANICAL
ENGG. DEPARTMENT
DRESSING: Dressing of grinding wheel is done to remove the loading and to
breakaway the glazed surface of the wheel, to bring out the sharp abrasive
particles for grinding the work.
REASONS FOR DOING TRUEING & DRESSING:
To regain the shape & efficiency of the wheel.
To reduce the heat generated between work & wheel.
To improve the surface quality of the work.
To reduce the strain on machine & wheel.
8. V.B.POLYTECHNIC, NAVSARI. (655) MECHANICAL
ENGG. DEPARTMENT
TYPES OF
DRESSER
The tool used for trueing & dressing is called "Dresser". The dressers are of the following
types.
Metal crushers
Abrasive sticks/
wheels
Diamond
dresser
(a) Single point
diamond dresser
(b) Single set
and matrix
diamond dresser
(c) Rotary and
stationary
diamond rolls
(d) Crushing
rolls