SlideShare ist ein Scribd-Unternehmen logo
1 von 9
Downloaden Sie, um offline zu lesen
Industrial Diesel Generator Set – KD800-E
50 Hz - Emission Optimized – EPA Tier 2 Compliant
Reference Conditions: 25°C Air Inlet Temperature, 40°C Fuel Inlet Temperature, 100 kPa Barometric Pressure; 10.7 g/kg of dry air Humidity. Intake Restriction
set to maximum allowable limit for clean filter; Exhaust Back pressure set to maximum allowable limit.
Data was taken from a single engine test according to the test methods, fuel specification and reference conditions stated above and is subjected to
instrumentation and engine-to-engine variability. Test conducted with alternate test methods, instrumentation, fuel or reference conditions can yield
different results. Data and specifications subject to change without notice.
RATINGS 400 V - 50 Hz
kVA 800
Standby
kWe 640
kVA 800
Data Center /
Mission Critical kWe 640
kVA 727
Prime
kWe 582
GENERAL SPECIFICATIONS
Engine brand KOHLER KD Series
Alternator commercial brand KOHLER
Voltage (V) 400/230
Standard Control Panel M80-D
Optional control panel APM403
Optional Control Panel APM802
Consumption @ 100% load ESP (L/h) 162
Consumption @ 100% load PRP (L/h) 149
Emission level Emission optimization - EPA Tier
2 Compliant
Type of Cooling Mechanical driven fan
Performance class G3
One step load acceptance (out of ISO
criteria)
100%
GENERATOR SETS RATINGS
Standby
Data Center /
Mission Critical
Prime
Voltage kWe kVA Amps kWe kVA kWe kVA
415/240 640 800 1113 640 800 582 727
400/230 640 800 1155 640 800 582 727
380/220 640 800 1216 640 800 582 727
Benefits & features
KOHLER SDMO premium quality
 KOHLER SDMO provides one source responsibility for
the generating set and accessories
 The generator set, its components and a wide range of
options have been fully developed, prototype tested,
factory built, and production-tested
 The generator sets are designed in accordance to
ISO8528-5 performance class G3 and accepts rated load
in one step
KOHLER SDMO premium performances
Engines
 Low fuel consumption thanks to a high technology
common rail injection engine
 A smaller footprint thanks to a high power density
 Low temperature starting capability
 Long maintenance interval
Alternator
 Provide industry leading motor starting capability
 Excitation system to permit sustained overcurrent >
300% In, during 10 sec
 Built with a class H insulation and IP23
Cooling
 A compact and complete solution using a mechanically
driven radiator fan
 High temperature and altitude product capacity
available
Control Panel
 The KOHLER SDMO wide controller range provide the
reliability and performances you expect from your
equipment. You can program, manage and diagnose it
easily and in an efficient way
KOHLER SDMO worldwide support
 A standard three-year or 1000-hour limited warranty for
standby applications.
 A standard two-year or 8700-hour limited warranty for
prime power applications.
 A worldwide product support
DIMENSIONS COMPACT VERSION
Length (mm) 4190
Width (mm) 1500
Height (mm) 2275
Tank capacity (L) 0
Dry weight (kg) 5380
DIMENSIONS SOUNDPROOFED VERSION M427SI
Type soundproofing M427SI
Length (mm) 6413
Width (mm) 2160
Height (mm) 2750
Tank capacity (L) 1035
Dry weight (kg) 8300
Acoustic pressure level @1m in dB(A) 50Hz
(75% PRP)
86
Acoustic pressure level @7m in dB(A) 50Hz
(75% PRP)
77
Industrial Diesel Generator Set – KD800-E
50 Hz - Emission Optimized – EPA Tier 2 Compliant
Reference Conditions: 25°C Air Inlet Temperature, 40°C Fuel Inlet Temperature, 100 kPa Barometric Pressure; 10.7 g/kg of dry air Humidity. Intake Restriction
set to maximum allowable limit for clean filter; Exhaust Back pressure set to maximum allowable limit.
Data was taken from a single engine test according to the test methods, fuel specification and reference conditions stated above and is subjected to
instrumentation and engine-to-engine variability. Test conducted with alternate test methods, instrumentation, fuel or reference conditions can yield
different results. Data and specifications subject to change without notice.
Engine
General
Engine brand KOHLER KD Series
Engine ref. KD27V12-5AES *
Air inlet system Turbo
Fuel Diesel Fuel
Emission level
Emission optimization - EPA
Tier 2 Compliant
Cylinder configuration V
Number of cylinders 12
Displacement (l) 26,97
Bore (mm) * Stroke (mm) 135 * 157
Compression ratio 15 : 1
Speed (RPM) 1500
Maximum stand-by power at rated RPM (kW) 709
Piston type & material Forged Steel
Charge Air coolant Air/Air
Frequency regulation, steady state (%) +/- 0.25%
Injection Type Direct
Governor type Electronic
Air cleaner type, models Dry
Fuel system
Maximum fuel pump flow (l/h) 245
Fuel Inlet Minimum recommended size (mm) 19,05
Fuel Outlet Minimum recommended size (mm) 9,53
Max head on fuel return line (m) 3,10
Maximum allowed inlet fuel temperature (°C) 60
Consumption with cooling system PRP ESP
Consumption @ 100% load (g/kW.h) 197,80 196,10
Consumption @ 75% load (g/kW.h) 206,20 203,10
Consumption @ 50% load (g/kW.h) 221,10 220,10
Consumption @ 25% load (g/kW.h) 243 240,20
Lubrication System
Oil system capacity including filters (l) 101
Min. oil pressure (bar) 3,30
Max. oil pressure (bar) 5,50
Oil sump capacity (l) 89
Oil consumption 100% ESP 50Hz (l/h) 0,08
Air Intake system
Max. intake restriction (mm H2O) 510
Combustion air flow (l/s) 819,03
Exhaust system
PRP ESP
Heat rejection to exhaust (kW) 510
Exhaust gas temperature (°C) 472 466
Exhaust gas flow (L/s) 1985 2138
Max. exhaust back pressure (mm H2O) 867
Cooling system and charge air cooler
Ambient temperature design (°C) 40
Radiator & Engine capacity (l) 97
Fan power 50Hz (kW) 28
Fan air flow w/o restriction (m3/s) 15
Available restriction on air flow (mm H2O) 20
Type of coolant Gencool
Radiated heat to ambiant (kW) 50
Heat rejection to coolant HT (kW) 251
HT circuit flow rate (l/min) 823
Coolant capacity HT, engine only (l) 55
Outlet coolant temperature (°C) 100
Max coolant temperature, Shutdown (°C) 105
Max. pressure at inlet of HT water pump (mbar) 1000
Thermostat begin of opening HT (°C) 82
Thermostat end of opening HT (°C) 92
CAC Heat Rejection (kW) 134
Compressor Discharge Temp at 25°C (°C) 180
* Engine reference may be partially modified depending on genset
application, options selected by the customer and lead time required.
Industrial Diesel Generator Set – KD800-E
50 Hz - Emission Optimized – EPA Tier 2 Compliant
Reference Conditions: 25°C Air Inlet Temperature, 40°C Fuel Inlet Temperature, 100 kPa Barometric Pressure; 10.7 g/kg of dry air Humidity. Intake Restriction
set to maximum allowable limit for clean filter; Exhaust Back pressure set to maximum allowable limit.
Data was taken from a single engine test according to the test methods, fuel specification and reference conditions stated above and is subjected to
instrumentation and engine-to-engine variability. Test conducted with alternate test methods, instrumentation, fuel or reference conditions can yield
different results. Data and specifications subject to change without notice.
Alternator Specifications
Alternator commercial brand KOHLER
Kohler Alternator description KH03544T
Number of pole 4
Number of bearing Single Bearing
Technology Brushless
Indication of protection IP23
Insulation class H
Number of wires 12
AVR Regulation Yes
Coupling Direct
Capacity for maintaining short circuit
at 3 ln for 10 s
Yes
Application data
Overspeed (rpm) 2250
Power factor (Cos Phi) 0,80
Voltage regulation at established
rating (+/- %)
0,50
Wave form : NEMA=TIF <40
Wave form : CEI=FHT <2
Total Harmonic Distortion in no-load
DHT (%)
2,5
Total Harmonic Distortion, on linear
load DHT (%)
2,2
Recovery time (Delta U = 20%
transcient) (ms)
200
Performance datas
Continuous Nominal Rating 40°C
(kVA)
750
Unbalanced load acceptance ratio
(%)
8
Peak motor starting (kVA) based on x% voltage dip power factor at 0.3
Alternator Standard Features
- All models are brushless, rotating-field alternators
- NEMA MG1, IEEE, and ANSI standards compliance for
temperature rise and motor starting
- The AVR voltage regulator provides superior short
circuit capability
- Self-ventilated and dip proof construction
- Sustained short-circuit current of up to 300% of the
rated current for up to 10 seconds
- Superior voltage waveform
Note: See Alternator Data Sheets for alternator application data
and ratings, efficiency curves, voltage dip with motor starting
curves, and short circuit decrement curves.
Industrial Diesel Generator Set – KD800-E
50 Hz - Emission Optimized – EPA Tier 2 Compliant
Reference Conditions: 25°C Air Inlet Temperature, 40°C Fuel Inlet Temperature, 100 kPa Barometric Pressure; 10.7 g/kg of dry air Humidity. Intake Restriction
set to maximum allowable limit for clean filter; Exhaust Back pressure set to maximum allowable limit.
Data was taken from a single engine test according to the test methods, fuel specification and reference conditions stated above and is subjected to
instrumentation and engine-to-engine variability. Test conducted with alternate test methods, instrumentation, fuel or reference conditions can yield
different results. Data and specifications subject to change without notice.
Dimensions compact version with baseframe fuel tank
Length (mm) * Width (mm) * Height (mm) 4190 * 1500 * 2275
Dry weight (kg) 5470
Tank capacity (L) 500
Dimensions compact version
Length (mm) * Width (mm) * Height (mm) 4190 * 1500 * 2275
Dry weight (kg) 5380
Tank capacity (L) 0
Dimensions soundproofed version
M427SI
Length (mm) * Width (mm) * Height (mm) 6413 * 2160 * 2750
Dry weight (kg) 8300
Tank capacity (L) 1035
Acoustic pressure level @1m in dB(A) 50Hz (75% PRP) 86
Sound power level guaranteed (Lwa) 50Hz (75% PRP) 108
Acoustic pressure level @7m in dB(A) 50Hz (75% PRP) 77
Dimensions super soundproofed version
M427SSI
Length (mm) * Width (mm) * Height (mm) 6400 * 2170 * 2750
Dry weight (kg) 8500
Tank capacity (L) 1035
Acoustic pressure level @1m in dB(A) 50Hz (75% PRP) 82
Sound power level guaranteed (Lwa) 50Hz (75% PRP) 104
Acoustic pressure level @7m in dB(A) 50Hz (75% PRP) 73
Container dimensions ISO20 soundproofed version
ISO20 Si
Length (mm) * Width (mm) * Height (mm) 6058 * 2438 * 2896
Dry weight (kg) 11210
Tank capacity (L) 500
Acoustic pressure level @1m in dB(A) 50Hz (75% PRP) 84
Sound power level guaranteed (Lwa) 50Hz (75% PRP) 105
Acoustic pressure level @7m in dB(A) 50Hz (75% PRP) 75
Container dimensions ISO20 super soundproofed version
ISO20 SSi
Length (mm) * Width (mm) * Height (mm) 9140 * 2438 * 2896
Industrial Diesel Generator Set – KD800-E
50 Hz - Emission Optimized – EPA Tier 2 Compliant
Reference Conditions: 25°C Air Inlet Temperature, 40°C Fuel Inlet Temperature, 100 kPa Barometric Pressure; 10.7 g/kg of dry air Humidity. Intake Restriction
set to maximum allowable limit for clean filter; Exhaust Back pressure set to maximum allowable limit.
Data was taken from a single engine test according to the test methods, fuel specification and reference conditions stated above and is subjected to
instrumentation and engine-to-engine variability. Test conducted with alternate test methods, instrumentation, fuel or reference conditions can yield
different results. Data and specifications subject to change without notice.
Dry weight (kg) 11800
Tank capacity (L) 500
Acoustic pressure level @1m in dB(A) 50Hz (75% PRP) 75
Sound power level guaranteed (Lwa) 50Hz (75% PRP) 97
Acoustic pressure level @7m in dB(A) 50Hz (75% PRP) 66
Industrial Diesel Generator Set – KD800-E
50 Hz - Emission Optimized – EPA Tier 2 Compliant
Reference Conditions: 25°C Air Inlet Temperature, 40°C Fuel Inlet Temperature, 100 kPa Barometric Pressure; 10.7 g/kg of dry air Humidity. Intake Restriction
set to maximum allowable limit for clean filter; Exhaust Back pressure set to maximum allowable limit.
Data was taken from a single engine test according to the test methods, fuel specification and reference conditions stated above and is subjected to
instrumentation and engine-to-engine variability. Test conducted with alternate test methods, instrumentation, fuel or reference conditions can yield
different results. Data and specifications subject to change without notice.
M80-D
The M80-D can be used as a basic terminal block for connecting a control unit and
as an instrument panel with a highly intuitive LCD screen giving an overview of
your generating set's basic parameters:
- Oil gauge
- Coolant temperature
- Oil temperature
- Engine speed
- Battery voltage
- Charge air temperature
- Fuel consumption
- etc.
The engine main functions can be controlled and events are recorded to facilitate
diagnostics:
- Starting
- Speed adjustment
- Stopping
- Droop
- etc.
APM403
BASIC GENERATING SET AND POWER PLANT CONTROL
The APM403 is a versatile control unit which allows operation in manual or
automatic mode
- Measurements : voltage and current
- kW/kWh/kVA power meters
- Standard specifications: Voltmeter, Frequency meter.
- Optional : Battery ammeter.
- J1939 CAN ECU engine control
- Alarms and faults: Oil pressure, Coolant temperature, Overspeed, Start-
up failure, alternator min/max, Emergency stop button.
- Engine parameters: Fuel level, hour counter, battery voltage.
- Optional (standard at 24V): Oil pressure, water temperature.
- Event log/ Management of the last 300 genset events.
- Mains and genset protection
- Clock management
- USB connections, USB Host and PC,
- Communications : RS485 INTERFACE
- ModBUS protocol /SNMP
- Optional : Ethernet, GPRS, remote control, 3G, 4G,
- Websupervisor, SMS, E-mails
APM802
ADVANCED POWER PLANT MANAGEMENT CONTROL
Dedicated to power plant management APM802 provides advanced control,
system monitoring, and system diagnostics for optimum performance and
compatibility
- Graphic display with touchscreen
- User language selectable
- Specially researched ergonomics
- High level of equipment availability
- USB and Ethernet ports
- Modbus protocol
- Making it easy to extend the installation
- Complies with the international standard IEC 61131-3
Industrial Diesel Generator Set – KD800-E
50 Hz - Emission Optimized – EPA Tier 2 Compliant
Reference Conditions: 25°C Air Inlet Temperature, 40°C Fuel Inlet Temperature, 100 kPa Barometric Pressure; 10.7 g/kg of dry air Humidity. Intake Restriction
set to maximum allowable limit for clean filter; Exhaust Back pressure set to maximum allowable limit.
Data was taken from a single engine test according to the test methods, fuel specification and reference conditions stated above and is subjected to
instrumentation and engine-to-engine variability. Test conducted with alternate test methods, instrumentation, fuel or reference conditions can yield
different results. Data and specifications subject to change without notice.
STANDARD SCOPE OF SUPPLY
All our KD Series gensets are fitted with:
- Industrial water cooled DIESEL engine
- Radiator with coolant
- Electric starter & charge alternator 24 V D.C
- Electronic governor
- Standard air filter
- Single bearing alternator IP 23 T° rise/ insulation to class H/H
- Welded steel base frame with 80% vibration attenuation mounts
- Flexible fuel lines & lub oil drain pump
- Fuel water separator filter
- Exhaust outlet with flexible and flanges
- M80-D control panel
- User’s manual (1 copy)
- Packing under plastic film
- Delivered with oil
- Delivered with antifreeze liquid
STANDARD DELIVERY
All our gensets are fitted with:
- Industrial water-cooled DIESEL engine
- Electric starter & charge alternator
- Standard air filter
- Electric circuit breaker, adapted to the short-circuit current of the generating set
- Single bearing alternator IP 23 T° rise/ insulation to class H/H
- Welded steel base frame with 85% vibration attenuation mounts
- frame height optimized to allow it to be moved safely by forklift
- enclosure made of new high-quality European steel with enhanced corrosion resistance
- enclosures and base frames tested and analyzed by the French Corrosion Institut
- 100% of tanks tested for permeability
- Personal protection ensured by protective grilles on hot and rotating parts
- Separate 9 dB(A) silencer
- Fuel tank welded inside the genset frame
- Retention bund included for gensets up to 250 kVA ESP
- Charged DC starting battery with electrolyte
- Emergency stop button on the outside
- Flexible fuel lines & lub oil drain cock
- Exhaust outlet with flexible and flanges
- User’s manual (1 copy)
- Packing under plastic film
- Delivered with oil and antifreeze liquid
CODES AND STANDARDS
Engine-generators set is designed and manufactured in facilities certified to standards ISO9001:2015 & ISO14001:2015. The generator sets and
its components are prototype-tested, factory built and production tested and are in compliance with the relevant standards:
- Machinery Directive 2006/42/EC of May 17th 2006
- EMC Directive2014/30/UE
- Safety objectives set out in the Low Voltage Directive 2014/35/UE
- EN ISO 8528-13, EN 60034-1, EN 61000-6-1, EN 61000-6-2, EN 61000-6-3, EN 55011, EN 1679-1 et EN 60204-1
POWER RATINGS DEFINITION according to ISO8528-1 (2018-02 edition) and ISO-3046-1
Emergency Standby Power (ESP): The standby rating is applicable to varying loads for the duration of a power outage. There is no overload
capability for this rating. Average load factor per 24 hours of operation is <85%.
Industrial Diesel Generator Set – KD800-E
50 Hz - Emission Optimized – EPA Tier 2 Compliant
Reference Conditions: 25°C Air Inlet Temperature, 40°C Fuel Inlet Temperature, 100 kPa Barometric Pressure; 10.7 g/kg of dry air Humidity. Intake Restriction
set to maximum allowable limit for clean filter; Exhaust Back pressure set to maximum allowable limit.
Data was taken from a single engine test according to the test methods, fuel specification and reference conditions stated above and is subjected to
instrumentation and engine-to-engine variability. Test conducted with alternate test methods, instrumentation, fuel or reference conditions can yield
different results. Data and specifications subject to change without notice.
Prime Power (PRP): At varying load, the number of generator set operating hours is unlimited. A 10% overload capacity is available for one
hour within 12 hour of operation. Average load factor per 24 hours of operation is <75%.
Data Center Mission Critical (DCP): Data Center Mission Critical power is defined as being the maximum power which a generating set is
capable of delivering while supplying a variable or continuous electrical load and during unlimited run hours. Depending on the sites to supply
and the availability of reliable utility, the generating set manufacturer is responsible to define what power level is able to supply to fulfil that
requirement including hardware or software or maintenance plan adaptation.
Industrial Diesel Generator Set – KD800-E
50 Hz - Emission Optimized – EPA Tier 2 Compliant
Reference Conditions: 25°C Air Inlet Temperature, 40°C Fuel Inlet Temperature, 100 kPa Barometric Pressure; 10.7 g/kg of dry air Humidity. Intake Restriction
set to maximum allowable limit for clean filter; Exhaust Back pressure set to maximum allowable limit.
Data was taken from a single engine test according to the test methods, fuel specification and reference conditions stated above and is subjected to
instrumentation and engine-to-engine variability. Test conducted with alternate test methods, instrumentation, fuel or reference conditions can yield
different results. Data and specifications subject to change without notice.
TERMS OF USE
According to the standard, the nominal power assigned by the genset is given for 25°C Air Intlet Temperature, of a barometric pressure of 100
kPA (100 m A.S.L), and 30% relative humidity. For particular conditions in your installation, refer to the derating table.
WARRANTY INFORMATIONS
Standard Warranty Period:
- for Products in "back-up" service
o 30 months from the date the Product leaves the plant, extended to 42 months for KD series
o 24 months from the Product’s commissioning date, extended to 36 months for KD series
o 1,000 running hours
The warranty expires when one of the above conditions is met.
- for Products in "continuous" service (continuous supply of electricity, either in the absence of any normal electricity grid or to
complement the grid),
o 18 months from the date the Product leaves the plant, extended to 30 months for KD series
o 12 months from the Product’s commissioning date, extended to 24 months for KD series
o 2,500 running hours, extended to 8700 running hours for KD series
The warranty expires when one of the above conditions is met.
For more details regarding conditions of application and scope of the warranty please refer to our General “terms & conditions of sales”.

Weitere ähnliche Inhalte

Was ist angesagt?

10 ta data sheet - flypartsguy.com - 8.2018
10 ta   data sheet - flypartsguy.com - 8.201810 ta   data sheet - flypartsguy.com - 8.2018
10 ta data sheet - flypartsguy.com - 8.2018FrankEasel
 
Isuzu ft4 engine line up
Isuzu ft4 engine line upIsuzu ft4 engine line up
Isuzu ft4 engine line upNeilHawkins22
 
T12 0636-e s16 r-y2ptaw2-1 std 60hz
T12 0636-e s16 r-y2ptaw2-1 std 60hzT12 0636-e s16 r-y2ptaw2-1 std 60hz
T12 0636-e s16 r-y2ptaw2-1 std 60hzJorge Gomez Flores
 
Passenger Transport Aircraft Concept Design-Final
Passenger Transport Aircraft Concept Design-FinalPassenger Transport Aircraft Concept Design-Final
Passenger Transport Aircraft Concept Design-FinalAlex Esche
 
Greaves product familirization
Greaves product familirizationGreaves product familirization
Greaves product familirizationDavid P
 
Axial Transformer Cooling Fans
Axial Transformer Cooling FansAxial Transformer Cooling Fans
Axial Transformer Cooling FansAhmet Ozkarsligil
 
An overview of diagnostic tools used in RESNET testing
An overview of diagnostic tools used in RESNET testingAn overview of diagnostic tools used in RESNET testing
An overview of diagnostic tools used in RESNET testingBill Spohn
 
Focus areas in economic operation of DG sets
Focus areas in economic operation of DG setsFocus areas in economic operation of DG sets
Focus areas in economic operation of DG setsD.Pawan Kumar
 
Hyster u005 (h80 ft) forklift service repair manual
Hyster u005 (h80 ft) forklift service repair manualHyster u005 (h80 ft) forklift service repair manual
Hyster u005 (h80 ft) forklift service repair manualfhjsekkemm
 

Was ist angesagt? (15)

10 ta data sheet - flypartsguy.com - 8.2018
10 ta   data sheet - flypartsguy.com - 8.201810 ta   data sheet - flypartsguy.com - 8.2018
10 ta data sheet - flypartsguy.com - 8.2018
 
Isuzu ft4 engine line up
Isuzu ft4 engine line upIsuzu ft4 engine line up
Isuzu ft4 engine line up
 
461
461461
461
 
T12 0636-e s16 r-y2ptaw2-1 std 60hz
T12 0636-e s16 r-y2ptaw2-1 std 60hzT12 0636-e s16 r-y2ptaw2-1 std 60hz
T12 0636-e s16 r-y2ptaw2-1 std 60hz
 
1600REOZM_8_12b
1600REOZM_8_12b1600REOZM_8_12b
1600REOZM_8_12b
 
FPI 660P
FPI 660PFPI 660P
FPI 660P
 
Passenger Transport Aircraft Concept Design-Final
Passenger Transport Aircraft Concept Design-FinalPassenger Transport Aircraft Concept Design-Final
Passenger Transport Aircraft Concept Design-Final
 
CHP Proposal
CHP ProposalCHP Proposal
CHP Proposal
 
2000REOZM_8_12b (1)
2000REOZM_8_12b (1)2000REOZM_8_12b (1)
2000REOZM_8_12b (1)
 
Greaves product familirization
Greaves product familirizationGreaves product familirization
Greaves product familirization
 
1250REOZM_8_12b
1250REOZM_8_12b1250REOZM_8_12b
1250REOZM_8_12b
 
Axial Transformer Cooling Fans
Axial Transformer Cooling FansAxial Transformer Cooling Fans
Axial Transformer Cooling Fans
 
An overview of diagnostic tools used in RESNET testing
An overview of diagnostic tools used in RESNET testingAn overview of diagnostic tools used in RESNET testing
An overview of diagnostic tools used in RESNET testing
 
Focus areas in economic operation of DG sets
Focus areas in economic operation of DG setsFocus areas in economic operation of DG sets
Focus areas in economic operation of DG sets
 
Hyster u005 (h80 ft) forklift service repair manual
Hyster u005 (h80 ft) forklift service repair manualHyster u005 (h80 ft) forklift service repair manual
Hyster u005 (h80 ft) forklift service repair manual
 

Ähnlich wie KD800-E.pdf

Ähnlich wie KD800-E.pdf (20)

KD1000-E.pdf
KD1000-E.pdfKD1000-E.pdf
KD1000-E.pdf
 
KD1000-F.pdf
KD1000-F.pdfKD1000-F.pdf
KD1000-F.pdf
 
B1000.pdf
B1000.pdfB1000.pdf
B1000.pdf
 
T16K.pdf
T16K.pdfT16K.pdf
T16K.pdf
 
FPI 725P
FPI 725PFPI 725P
FPI 725P
 
FPI 750P
FPI 750PFPI 750P
FPI 750P
 
Avp694 6 compressed
Avp694 6 compressedAvp694 6 compressed
Avp694 6 compressed
 
Technical Data Sheet
Technical Data SheetTechnical Data Sheet
Technical Data Sheet
 
1103A-33G ElectropaK (PN1780 75th).pdf
1103A-33G ElectropaK (PN1780 75th).pdf1103A-33G ElectropaK (PN1780 75th).pdf
1103A-33G ElectropaK (PN1780 75th).pdf
 
FPI 1000P
FPI 1000PFPI 1000P
FPI 1000P
 
C175 16 data sheets epd0105-a
C175 16 data sheets epd0105-aC175 16 data sheets epd0105-a
C175 16 data sheets epd0105-a
 
4DES-7; R404A; t0 -5; tc 45.pdf for CS S
4DES-7; R404A; t0 -5; tc 45.pdf for CS S4DES-7; R404A; t0 -5; tc 45.pdf for CS S
4DES-7; R404A; t0 -5; tc 45.pdf for CS S
 
Googol qta5400 g1 2000kw 2500kva
Googol qta5400 g1 2000kw 2500kva Googol qta5400 g1 2000kw 2500kva
Googol qta5400 g1 2000kw 2500kva
 
P1650-1_(EN).PDF
P1650-1_(EN).PDFP1650-1_(EN).PDF
P1650-1_(EN).PDF
 
Googol qta5400 g5 2400kw 3000kva
Googol qta5400 g5 2400kw 3000kva Googol qta5400 g5 2400kw 3000kva
Googol qta5400 g5 2400kw 3000kva
 
Tss dm0632-05-gs-epg-7155423
Tss dm0632-05-gs-epg-7155423Tss dm0632-05-gs-epg-7155423
Tss dm0632-05-gs-epg-7155423
 
IA33 (30kVA Prime/ 33kVA Standby) - Adpower Generator Set 80313AM1P.S550
IA33 (30kVA Prime/ 33kVA Standby) - Adpower Generator Set 80313AM1P.S550IA33 (30kVA Prime/ 33kVA Standby) - Adpower Generator Set 80313AM1P.S550
IA33 (30kVA Prime/ 33kVA Standby) - Adpower Generator Set 80313AM1P.S550
 
1103A-33TG1 ElectropaK (PN1781 75th).pdf
1103A-33TG1 ElectropaK (PN1781 75th).pdf1103A-33TG1 ElectropaK (PN1781 75th).pdf
1103A-33TG1 ElectropaK (PN1781 75th).pdf
 
Ss 11317131-18321546-144
Ss 11317131-18321546-144Ss 11317131-18321546-144
Ss 11317131-18321546-144
 
1500REOZM_8_12b
1500REOZM_8_12b1500REOZM_8_12b
1500REOZM_8_12b
 

Mehr von JoanCarlesLLopys

sdmo-generator_katalog_eng.pdf
sdmo-generator_katalog_eng.pdfsdmo-generator_katalog_eng.pdf
sdmo-generator_katalog_eng.pdfJoanCarlesLLopys
 
P1500P3_P1650E3_(ES) (4).PDF
P1500P3_P1650E3_(ES) (4).PDFP1500P3_P1650E3_(ES) (4).PDF
P1500P3_P1650E3_(ES) (4).PDFJoanCarlesLLopys
 
P660-3_OptAlt_(ES) (2).pdf
P660-3_OptAlt_(ES) (2).pdfP660-3_OptAlt_(ES) (2).pdf
P660-3_OptAlt_(ES) (2).pdfJoanCarlesLLopys
 
P250-5_StdAlt_(ES) (2).pdf
P250-5_StdAlt_(ES) (2).pdfP250-5_StdAlt_(ES) (2).pdf
P250-5_StdAlt_(ES) (2).pdfJoanCarlesLLopys
 
P900-1_OptAlt_(ES) (3).pdf
P900-1_OptAlt_(ES) (3).pdfP900-1_OptAlt_(ES) (3).pdf
P900-1_OptAlt_(ES) (3).pdfJoanCarlesLLopys
 
P1100-1_OptAlt_(ES) (1).pdf
P1100-1_OptAlt_(ES) (1).pdfP1100-1_OptAlt_(ES) (1).pdf
P1100-1_OptAlt_(ES) (1).pdfJoanCarlesLLopys
 
P200-3_50HZ_StdAlt_(ES) (2).pdf
P200-3_50HZ_StdAlt_(ES) (2).pdfP200-3_50HZ_StdAlt_(ES) (2).pdf
P200-3_50HZ_StdAlt_(ES) (2).pdfJoanCarlesLLopys
 
P500-3_OptAlt_(ES) (1).pdf
P500-3_OptAlt_(ES) (1).pdfP500-3_OptAlt_(ES) (1).pdf
P500-3_OptAlt_(ES) (1).pdfJoanCarlesLLopys
 

Mehr von JoanCarlesLLopys (8)

sdmo-generator_katalog_eng.pdf
sdmo-generator_katalog_eng.pdfsdmo-generator_katalog_eng.pdf
sdmo-generator_katalog_eng.pdf
 
P1500P3_P1650E3_(ES) (4).PDF
P1500P3_P1650E3_(ES) (4).PDFP1500P3_P1650E3_(ES) (4).PDF
P1500P3_P1650E3_(ES) (4).PDF
 
P660-3_OptAlt_(ES) (2).pdf
P660-3_OptAlt_(ES) (2).pdfP660-3_OptAlt_(ES) (2).pdf
P660-3_OptAlt_(ES) (2).pdf
 
P250-5_StdAlt_(ES) (2).pdf
P250-5_StdAlt_(ES) (2).pdfP250-5_StdAlt_(ES) (2).pdf
P250-5_StdAlt_(ES) (2).pdf
 
P900-1_OptAlt_(ES) (3).pdf
P900-1_OptAlt_(ES) (3).pdfP900-1_OptAlt_(ES) (3).pdf
P900-1_OptAlt_(ES) (3).pdf
 
P1100-1_OptAlt_(ES) (1).pdf
P1100-1_OptAlt_(ES) (1).pdfP1100-1_OptAlt_(ES) (1).pdf
P1100-1_OptAlt_(ES) (1).pdf
 
P200-3_50HZ_StdAlt_(ES) (2).pdf
P200-3_50HZ_StdAlt_(ES) (2).pdfP200-3_50HZ_StdAlt_(ES) (2).pdf
P200-3_50HZ_StdAlt_(ES) (2).pdf
 
P500-3_OptAlt_(ES) (1).pdf
P500-3_OptAlt_(ES) (1).pdfP500-3_OptAlt_(ES) (1).pdf
P500-3_OptAlt_(ES) (1).pdf
 

KD800-E.pdf

  • 1. Industrial Diesel Generator Set – KD800-E 50 Hz - Emission Optimized – EPA Tier 2 Compliant Reference Conditions: 25°C Air Inlet Temperature, 40°C Fuel Inlet Temperature, 100 kPa Barometric Pressure; 10.7 g/kg of dry air Humidity. Intake Restriction set to maximum allowable limit for clean filter; Exhaust Back pressure set to maximum allowable limit. Data was taken from a single engine test according to the test methods, fuel specification and reference conditions stated above and is subjected to instrumentation and engine-to-engine variability. Test conducted with alternate test methods, instrumentation, fuel or reference conditions can yield different results. Data and specifications subject to change without notice. RATINGS 400 V - 50 Hz kVA 800 Standby kWe 640 kVA 800 Data Center / Mission Critical kWe 640 kVA 727 Prime kWe 582 GENERAL SPECIFICATIONS Engine brand KOHLER KD Series Alternator commercial brand KOHLER Voltage (V) 400/230 Standard Control Panel M80-D Optional control panel APM403 Optional Control Panel APM802 Consumption @ 100% load ESP (L/h) 162 Consumption @ 100% load PRP (L/h) 149 Emission level Emission optimization - EPA Tier 2 Compliant Type of Cooling Mechanical driven fan Performance class G3 One step load acceptance (out of ISO criteria) 100% GENERATOR SETS RATINGS Standby Data Center / Mission Critical Prime Voltage kWe kVA Amps kWe kVA kWe kVA 415/240 640 800 1113 640 800 582 727 400/230 640 800 1155 640 800 582 727 380/220 640 800 1216 640 800 582 727 Benefits & features KOHLER SDMO premium quality  KOHLER SDMO provides one source responsibility for the generating set and accessories  The generator set, its components and a wide range of options have been fully developed, prototype tested, factory built, and production-tested  The generator sets are designed in accordance to ISO8528-5 performance class G3 and accepts rated load in one step KOHLER SDMO premium performances Engines  Low fuel consumption thanks to a high technology common rail injection engine  A smaller footprint thanks to a high power density  Low temperature starting capability  Long maintenance interval Alternator  Provide industry leading motor starting capability  Excitation system to permit sustained overcurrent > 300% In, during 10 sec  Built with a class H insulation and IP23 Cooling  A compact and complete solution using a mechanically driven radiator fan  High temperature and altitude product capacity available Control Panel  The KOHLER SDMO wide controller range provide the reliability and performances you expect from your equipment. You can program, manage and diagnose it easily and in an efficient way KOHLER SDMO worldwide support  A standard three-year or 1000-hour limited warranty for standby applications.  A standard two-year or 8700-hour limited warranty for prime power applications.  A worldwide product support DIMENSIONS COMPACT VERSION Length (mm) 4190 Width (mm) 1500 Height (mm) 2275 Tank capacity (L) 0 Dry weight (kg) 5380 DIMENSIONS SOUNDPROOFED VERSION M427SI Type soundproofing M427SI Length (mm) 6413 Width (mm) 2160 Height (mm) 2750 Tank capacity (L) 1035 Dry weight (kg) 8300 Acoustic pressure level @1m in dB(A) 50Hz (75% PRP) 86 Acoustic pressure level @7m in dB(A) 50Hz (75% PRP) 77
  • 2. Industrial Diesel Generator Set – KD800-E 50 Hz - Emission Optimized – EPA Tier 2 Compliant Reference Conditions: 25°C Air Inlet Temperature, 40°C Fuel Inlet Temperature, 100 kPa Barometric Pressure; 10.7 g/kg of dry air Humidity. Intake Restriction set to maximum allowable limit for clean filter; Exhaust Back pressure set to maximum allowable limit. Data was taken from a single engine test according to the test methods, fuel specification and reference conditions stated above and is subjected to instrumentation and engine-to-engine variability. Test conducted with alternate test methods, instrumentation, fuel or reference conditions can yield different results. Data and specifications subject to change without notice. Engine General Engine brand KOHLER KD Series Engine ref. KD27V12-5AES * Air inlet system Turbo Fuel Diesel Fuel Emission level Emission optimization - EPA Tier 2 Compliant Cylinder configuration V Number of cylinders 12 Displacement (l) 26,97 Bore (mm) * Stroke (mm) 135 * 157 Compression ratio 15 : 1 Speed (RPM) 1500 Maximum stand-by power at rated RPM (kW) 709 Piston type & material Forged Steel Charge Air coolant Air/Air Frequency regulation, steady state (%) +/- 0.25% Injection Type Direct Governor type Electronic Air cleaner type, models Dry Fuel system Maximum fuel pump flow (l/h) 245 Fuel Inlet Minimum recommended size (mm) 19,05 Fuel Outlet Minimum recommended size (mm) 9,53 Max head on fuel return line (m) 3,10 Maximum allowed inlet fuel temperature (°C) 60 Consumption with cooling system PRP ESP Consumption @ 100% load (g/kW.h) 197,80 196,10 Consumption @ 75% load (g/kW.h) 206,20 203,10 Consumption @ 50% load (g/kW.h) 221,10 220,10 Consumption @ 25% load (g/kW.h) 243 240,20 Lubrication System Oil system capacity including filters (l) 101 Min. oil pressure (bar) 3,30 Max. oil pressure (bar) 5,50 Oil sump capacity (l) 89 Oil consumption 100% ESP 50Hz (l/h) 0,08 Air Intake system Max. intake restriction (mm H2O) 510 Combustion air flow (l/s) 819,03 Exhaust system PRP ESP Heat rejection to exhaust (kW) 510 Exhaust gas temperature (°C) 472 466 Exhaust gas flow (L/s) 1985 2138 Max. exhaust back pressure (mm H2O) 867 Cooling system and charge air cooler Ambient temperature design (°C) 40 Radiator & Engine capacity (l) 97 Fan power 50Hz (kW) 28 Fan air flow w/o restriction (m3/s) 15 Available restriction on air flow (mm H2O) 20 Type of coolant Gencool Radiated heat to ambiant (kW) 50 Heat rejection to coolant HT (kW) 251 HT circuit flow rate (l/min) 823 Coolant capacity HT, engine only (l) 55 Outlet coolant temperature (°C) 100 Max coolant temperature, Shutdown (°C) 105 Max. pressure at inlet of HT water pump (mbar) 1000 Thermostat begin of opening HT (°C) 82 Thermostat end of opening HT (°C) 92 CAC Heat Rejection (kW) 134 Compressor Discharge Temp at 25°C (°C) 180 * Engine reference may be partially modified depending on genset application, options selected by the customer and lead time required.
  • 3. Industrial Diesel Generator Set – KD800-E 50 Hz - Emission Optimized – EPA Tier 2 Compliant Reference Conditions: 25°C Air Inlet Temperature, 40°C Fuel Inlet Temperature, 100 kPa Barometric Pressure; 10.7 g/kg of dry air Humidity. Intake Restriction set to maximum allowable limit for clean filter; Exhaust Back pressure set to maximum allowable limit. Data was taken from a single engine test according to the test methods, fuel specification and reference conditions stated above and is subjected to instrumentation and engine-to-engine variability. Test conducted with alternate test methods, instrumentation, fuel or reference conditions can yield different results. Data and specifications subject to change without notice. Alternator Specifications Alternator commercial brand KOHLER Kohler Alternator description KH03544T Number of pole 4 Number of bearing Single Bearing Technology Brushless Indication of protection IP23 Insulation class H Number of wires 12 AVR Regulation Yes Coupling Direct Capacity for maintaining short circuit at 3 ln for 10 s Yes Application data Overspeed (rpm) 2250 Power factor (Cos Phi) 0,80 Voltage regulation at established rating (+/- %) 0,50 Wave form : NEMA=TIF <40 Wave form : CEI=FHT <2 Total Harmonic Distortion in no-load DHT (%) 2,5 Total Harmonic Distortion, on linear load DHT (%) 2,2 Recovery time (Delta U = 20% transcient) (ms) 200 Performance datas Continuous Nominal Rating 40°C (kVA) 750 Unbalanced load acceptance ratio (%) 8 Peak motor starting (kVA) based on x% voltage dip power factor at 0.3 Alternator Standard Features - All models are brushless, rotating-field alternators - NEMA MG1, IEEE, and ANSI standards compliance for temperature rise and motor starting - The AVR voltage regulator provides superior short circuit capability - Self-ventilated and dip proof construction - Sustained short-circuit current of up to 300% of the rated current for up to 10 seconds - Superior voltage waveform Note: See Alternator Data Sheets for alternator application data and ratings, efficiency curves, voltage dip with motor starting curves, and short circuit decrement curves.
  • 4. Industrial Diesel Generator Set – KD800-E 50 Hz - Emission Optimized – EPA Tier 2 Compliant Reference Conditions: 25°C Air Inlet Temperature, 40°C Fuel Inlet Temperature, 100 kPa Barometric Pressure; 10.7 g/kg of dry air Humidity. Intake Restriction set to maximum allowable limit for clean filter; Exhaust Back pressure set to maximum allowable limit. Data was taken from a single engine test according to the test methods, fuel specification and reference conditions stated above and is subjected to instrumentation and engine-to-engine variability. Test conducted with alternate test methods, instrumentation, fuel or reference conditions can yield different results. Data and specifications subject to change without notice. Dimensions compact version with baseframe fuel tank Length (mm) * Width (mm) * Height (mm) 4190 * 1500 * 2275 Dry weight (kg) 5470 Tank capacity (L) 500 Dimensions compact version Length (mm) * Width (mm) * Height (mm) 4190 * 1500 * 2275 Dry weight (kg) 5380 Tank capacity (L) 0 Dimensions soundproofed version M427SI Length (mm) * Width (mm) * Height (mm) 6413 * 2160 * 2750 Dry weight (kg) 8300 Tank capacity (L) 1035 Acoustic pressure level @1m in dB(A) 50Hz (75% PRP) 86 Sound power level guaranteed (Lwa) 50Hz (75% PRP) 108 Acoustic pressure level @7m in dB(A) 50Hz (75% PRP) 77 Dimensions super soundproofed version M427SSI Length (mm) * Width (mm) * Height (mm) 6400 * 2170 * 2750 Dry weight (kg) 8500 Tank capacity (L) 1035 Acoustic pressure level @1m in dB(A) 50Hz (75% PRP) 82 Sound power level guaranteed (Lwa) 50Hz (75% PRP) 104 Acoustic pressure level @7m in dB(A) 50Hz (75% PRP) 73 Container dimensions ISO20 soundproofed version ISO20 Si Length (mm) * Width (mm) * Height (mm) 6058 * 2438 * 2896 Dry weight (kg) 11210 Tank capacity (L) 500 Acoustic pressure level @1m in dB(A) 50Hz (75% PRP) 84 Sound power level guaranteed (Lwa) 50Hz (75% PRP) 105 Acoustic pressure level @7m in dB(A) 50Hz (75% PRP) 75 Container dimensions ISO20 super soundproofed version ISO20 SSi Length (mm) * Width (mm) * Height (mm) 9140 * 2438 * 2896
  • 5. Industrial Diesel Generator Set – KD800-E 50 Hz - Emission Optimized – EPA Tier 2 Compliant Reference Conditions: 25°C Air Inlet Temperature, 40°C Fuel Inlet Temperature, 100 kPa Barometric Pressure; 10.7 g/kg of dry air Humidity. Intake Restriction set to maximum allowable limit for clean filter; Exhaust Back pressure set to maximum allowable limit. Data was taken from a single engine test according to the test methods, fuel specification and reference conditions stated above and is subjected to instrumentation and engine-to-engine variability. Test conducted with alternate test methods, instrumentation, fuel or reference conditions can yield different results. Data and specifications subject to change without notice. Dry weight (kg) 11800 Tank capacity (L) 500 Acoustic pressure level @1m in dB(A) 50Hz (75% PRP) 75 Sound power level guaranteed (Lwa) 50Hz (75% PRP) 97 Acoustic pressure level @7m in dB(A) 50Hz (75% PRP) 66
  • 6. Industrial Diesel Generator Set – KD800-E 50 Hz - Emission Optimized – EPA Tier 2 Compliant Reference Conditions: 25°C Air Inlet Temperature, 40°C Fuel Inlet Temperature, 100 kPa Barometric Pressure; 10.7 g/kg of dry air Humidity. Intake Restriction set to maximum allowable limit for clean filter; Exhaust Back pressure set to maximum allowable limit. Data was taken from a single engine test according to the test methods, fuel specification and reference conditions stated above and is subjected to instrumentation and engine-to-engine variability. Test conducted with alternate test methods, instrumentation, fuel or reference conditions can yield different results. Data and specifications subject to change without notice. M80-D The M80-D can be used as a basic terminal block for connecting a control unit and as an instrument panel with a highly intuitive LCD screen giving an overview of your generating set's basic parameters: - Oil gauge - Coolant temperature - Oil temperature - Engine speed - Battery voltage - Charge air temperature - Fuel consumption - etc. The engine main functions can be controlled and events are recorded to facilitate diagnostics: - Starting - Speed adjustment - Stopping - Droop - etc. APM403 BASIC GENERATING SET AND POWER PLANT CONTROL The APM403 is a versatile control unit which allows operation in manual or automatic mode - Measurements : voltage and current - kW/kWh/kVA power meters - Standard specifications: Voltmeter, Frequency meter. - Optional : Battery ammeter. - J1939 CAN ECU engine control - Alarms and faults: Oil pressure, Coolant temperature, Overspeed, Start- up failure, alternator min/max, Emergency stop button. - Engine parameters: Fuel level, hour counter, battery voltage. - Optional (standard at 24V): Oil pressure, water temperature. - Event log/ Management of the last 300 genset events. - Mains and genset protection - Clock management - USB connections, USB Host and PC, - Communications : RS485 INTERFACE - ModBUS protocol /SNMP - Optional : Ethernet, GPRS, remote control, 3G, 4G, - Websupervisor, SMS, E-mails APM802 ADVANCED POWER PLANT MANAGEMENT CONTROL Dedicated to power plant management APM802 provides advanced control, system monitoring, and system diagnostics for optimum performance and compatibility - Graphic display with touchscreen - User language selectable - Specially researched ergonomics - High level of equipment availability - USB and Ethernet ports - Modbus protocol - Making it easy to extend the installation - Complies with the international standard IEC 61131-3
  • 7. Industrial Diesel Generator Set – KD800-E 50 Hz - Emission Optimized – EPA Tier 2 Compliant Reference Conditions: 25°C Air Inlet Temperature, 40°C Fuel Inlet Temperature, 100 kPa Barometric Pressure; 10.7 g/kg of dry air Humidity. Intake Restriction set to maximum allowable limit for clean filter; Exhaust Back pressure set to maximum allowable limit. Data was taken from a single engine test according to the test methods, fuel specification and reference conditions stated above and is subjected to instrumentation and engine-to-engine variability. Test conducted with alternate test methods, instrumentation, fuel or reference conditions can yield different results. Data and specifications subject to change without notice. STANDARD SCOPE OF SUPPLY All our KD Series gensets are fitted with: - Industrial water cooled DIESEL engine - Radiator with coolant - Electric starter & charge alternator 24 V D.C - Electronic governor - Standard air filter - Single bearing alternator IP 23 T° rise/ insulation to class H/H - Welded steel base frame with 80% vibration attenuation mounts - Flexible fuel lines & lub oil drain pump - Fuel water separator filter - Exhaust outlet with flexible and flanges - M80-D control panel - User’s manual (1 copy) - Packing under plastic film - Delivered with oil - Delivered with antifreeze liquid STANDARD DELIVERY All our gensets are fitted with: - Industrial water-cooled DIESEL engine - Electric starter & charge alternator - Standard air filter - Electric circuit breaker, adapted to the short-circuit current of the generating set - Single bearing alternator IP 23 T° rise/ insulation to class H/H - Welded steel base frame with 85% vibration attenuation mounts - frame height optimized to allow it to be moved safely by forklift - enclosure made of new high-quality European steel with enhanced corrosion resistance - enclosures and base frames tested and analyzed by the French Corrosion Institut - 100% of tanks tested for permeability - Personal protection ensured by protective grilles on hot and rotating parts - Separate 9 dB(A) silencer - Fuel tank welded inside the genset frame - Retention bund included for gensets up to 250 kVA ESP - Charged DC starting battery with electrolyte - Emergency stop button on the outside - Flexible fuel lines & lub oil drain cock - Exhaust outlet with flexible and flanges - User’s manual (1 copy) - Packing under plastic film - Delivered with oil and antifreeze liquid CODES AND STANDARDS Engine-generators set is designed and manufactured in facilities certified to standards ISO9001:2015 & ISO14001:2015. The generator sets and its components are prototype-tested, factory built and production tested and are in compliance with the relevant standards: - Machinery Directive 2006/42/EC of May 17th 2006 - EMC Directive2014/30/UE - Safety objectives set out in the Low Voltage Directive 2014/35/UE - EN ISO 8528-13, EN 60034-1, EN 61000-6-1, EN 61000-6-2, EN 61000-6-3, EN 55011, EN 1679-1 et EN 60204-1 POWER RATINGS DEFINITION according to ISO8528-1 (2018-02 edition) and ISO-3046-1 Emergency Standby Power (ESP): The standby rating is applicable to varying loads for the duration of a power outage. There is no overload capability for this rating. Average load factor per 24 hours of operation is <85%.
  • 8. Industrial Diesel Generator Set – KD800-E 50 Hz - Emission Optimized – EPA Tier 2 Compliant Reference Conditions: 25°C Air Inlet Temperature, 40°C Fuel Inlet Temperature, 100 kPa Barometric Pressure; 10.7 g/kg of dry air Humidity. Intake Restriction set to maximum allowable limit for clean filter; Exhaust Back pressure set to maximum allowable limit. Data was taken from a single engine test according to the test methods, fuel specification and reference conditions stated above and is subjected to instrumentation and engine-to-engine variability. Test conducted with alternate test methods, instrumentation, fuel or reference conditions can yield different results. Data and specifications subject to change without notice. Prime Power (PRP): At varying load, the number of generator set operating hours is unlimited. A 10% overload capacity is available for one hour within 12 hour of operation. Average load factor per 24 hours of operation is <75%. Data Center Mission Critical (DCP): Data Center Mission Critical power is defined as being the maximum power which a generating set is capable of delivering while supplying a variable or continuous electrical load and during unlimited run hours. Depending on the sites to supply and the availability of reliable utility, the generating set manufacturer is responsible to define what power level is able to supply to fulfil that requirement including hardware or software or maintenance plan adaptation.
  • 9. Industrial Diesel Generator Set – KD800-E 50 Hz - Emission Optimized – EPA Tier 2 Compliant Reference Conditions: 25°C Air Inlet Temperature, 40°C Fuel Inlet Temperature, 100 kPa Barometric Pressure; 10.7 g/kg of dry air Humidity. Intake Restriction set to maximum allowable limit for clean filter; Exhaust Back pressure set to maximum allowable limit. Data was taken from a single engine test according to the test methods, fuel specification and reference conditions stated above and is subjected to instrumentation and engine-to-engine variability. Test conducted with alternate test methods, instrumentation, fuel or reference conditions can yield different results. Data and specifications subject to change without notice. TERMS OF USE According to the standard, the nominal power assigned by the genset is given for 25°C Air Intlet Temperature, of a barometric pressure of 100 kPA (100 m A.S.L), and 30% relative humidity. For particular conditions in your installation, refer to the derating table. WARRANTY INFORMATIONS Standard Warranty Period: - for Products in "back-up" service o 30 months from the date the Product leaves the plant, extended to 42 months for KD series o 24 months from the Product’s commissioning date, extended to 36 months for KD series o 1,000 running hours The warranty expires when one of the above conditions is met. - for Products in "continuous" service (continuous supply of electricity, either in the absence of any normal electricity grid or to complement the grid), o 18 months from the date the Product leaves the plant, extended to 30 months for KD series o 12 months from the Product’s commissioning date, extended to 24 months for KD series o 2,500 running hours, extended to 8700 running hours for KD series The warranty expires when one of the above conditions is met. For more details regarding conditions of application and scope of the warranty please refer to our General “terms & conditions of sales”.