Introducing Induron's revolutionary new ceramic epoxies.

1. TWENTY NINE YEARS IN USE. And Counting.
THOUSANDS OF MILES LINED. And Counting.
NUMBER ONE INDUSTRY-WIDE. And Holding.
NOW AVAILABLE TO THE REST
OF THE WATER MARKET.

2. COAT IT AND FORGET IT.
INTRODUCING OUR
R EVOLUTI ONARY
NEW CERAMIC
EPOXIES.
No matter what the project is, we know that painting
is the last thing you want to deal with. Now it’s the last
thing you’ll have to worry about. Ever again.
Announcing Induron’s breakthrough line of Ceramic
Epoxy Coatings. All built on the same backbone that’s
made our own Protecto 401™ the sanitary sewage
ductile iron pipe market’s coating of choice since
1981. All using the same proprietary technology
that’s coated literally thousands of miles of pipe
with no failure.
So give your projects—and your reputation—the
protection they deserve. Ask your Induron rep about
our new Ceramic Epoxies today.
REMINDER: Only Protecto-401™ is formulated specifically as a lining in
ductile iron pipe and fittings used in sewer service.

3. COU NT ON IT.
EVERY PRODUCT IN OUR CERAMIC EPOXY LINE OFFERS:
ABSOLUTE MINIMAL UNDERCUTTING
Actually self-heals pinholes and spot corrosion. With A-Rated cathodic disbondment.
UNRIVALED FILM BUILD
Minimize the risk of holidays, and improve edge protection, with up to 40 mils in a single coat.
ULTRA-LOW PERMEABILITY
Keep corrosive liquids away from your substrate.
NON-ABLATIVE SURFACE
Inhibits microbiological contamination and prevents acidothiobacillus growth.

4. GOING GREEN HAS NEVE
WITH THESE SOLVENT-FREE
CERAMIC EPOXY COATINGS:
PERMASAFE 100 CERAMIC EPOXY
An immersion-grade lining formulated specifically for maximum corrosion protection of steel and
concrete substrates immersed in sewage—or exposed to similar aggressive environments.
100% volume solids
—Apply up to 40 mils in a single coat.
—20% Sulfuric Acid Immersion: NO EFFECT after 7,000 hours per ASTM D-714.
—25% Sodium Hydroxide Immersion: NO EFFECT after 7,000 hours per ASTM D-714.
—0.0 lbs/gal Hazardous Air Pollutants.
—Prohibits MIC contamination and does not allow growth of acidothiobacillus.
PERMACLEAN 100 CERAMIC EPOXY
An immersion-grade lining for maximum corrosion protection of steel and concrete. Formulated
especially for potable water. Certified for cold end uses by the Water Quality Association for
potable water immersion service.
100% volume solids
—Apply up to 30 mils in a single coat.
—Suitable for potable water immersion in 72 hours
—UL/NSF Standard 61 approved for potable water immersion for 15-30 mils DFT.
—Distilled Water Immersion: NO EFFECT after 7,000 hours when rated using ASTM D-714.
—0.0 lbs/gal Hazardous Air Pollutants.

5. VER MADE MORE SENSE.
PERFORMANCE TEST (PERMASAFE & PERMACLEAN)
SYSTEM: One Coat @ 30 mils DFT
TEST
METHOD
DURATION
RESULT
IMPACT RESISTANCE
ASTM D-2794
RECOAT - 140º F, Elcometer
ASTM D-4541
ADHESION, X-Cut
ASTM D-3359
5% SALT WATER @ 120º F
IMMERSION
120º F WATER IMMERSION
ASTM D-714
120º F 25% NaOH
ASTM D-714
20% H2SO4
ASTM D-714
5% H2SO4
ASTM D-714
SALT SPRAY 5% NaCl
ASTM B-117
Non-scribed
Scribed
7 days
24 hours
7 days
4,000 hours
7,000 hours
7,000 hours
7,000 hours
7,000 hours
80 inch-pounds
OK
5A
No Effect
No Effect
No Effect
No Effect
No Effect
4,000 hours
4,000 hours
No Effect
8 Rating

6. PROTECT AGAINST
THE REAL DANGER.
H I NT: IT’S NOT ACI D. IT’S WATE R.
CERAMAPURE PL90 CERAMIC EPOXY
Formulated for the protection of ductile iron and steel pipe and fittings. Certified for cold end
uses by the Water Quality Association for potable water immersion service.
Ceramapure PL90 meets all NSF/ANSI International Standard 61 requirements for potable
water immersion service under the following conditions:
—Coating thickness of up to 30 mils (which can be applied in a single coat).
—Pipe diameters of four inches or larger.
PERFORMANCE TEST
SYSTEM: One Coat @ 30 mils DFT
TEST
METHOD
DURATION
RESULT
Salt Spray
ASTM B-117
Scribed - 7 days
Unscribed - 7 days
6,000 hours
7,200 hours
#9 Rating
No Effect
IMMERSION
Tap Water - 7 days Cure Ambient
Tap Water - 7 days Cure 120º F
5% H2SO4
Immersion-amb
20% H2SO4
Immersion-amb
7,000 hours
7,000 hours
4,800 hours
4,800 hours
No Effect
No Effect
No Effect
No Effect
IMPACT RESISTANCE
Direct
Salt Water
ASTM D-2794
5% NaCl Immersion
1 month
7,200 hours
100 inch-pounds
No Effect
Recoat (pull-off)
Adhesion
ASTM D-4541
ASTM D-3359-A
7 days
800 psi - cohesive
5A

7. CERAMAPURE TL70 CERAMIC EPOXY
Formulated for the protection of steel and concrete immersed in pot able water.
Exceeds AI M and OTC VO C regulations with a conventional airless spray rig.
Certified by the Water Quality Association for pot able water immersion service.
—Apply in two coats at 10-15 dry mils per coat.
—Allows for high build application, exceeding AI M and OTC regulations with a
conventional airless spray rig.
PERFORMANCE TEST
TE ST
R E S U LT
Taber Abrasion (ASTM D-4060)
Pull-Off Adhesion (ASTM D-4541)
Freeze / Thaw (ASTM 3359, method A)
Fresh Water Immersion
Direct Impact (ASTM D-2704)
Recoatability
0.195 gr. Avg. loss / 1000 cycles
900 PSI @ Avg. of 4 pulls
Passed @ 10 cycles
8,500 hours with no effect
120 inch-pounds
Pass after 9 months (with itself) @ 5A

8. LOOK B E N EATH TH E S U R FACE.
For complete product specifications and test data on our entire
line of Induron’s ceramic epoxy coatings, call your rep today!
P.O. Box 2371
Birmingham, Alabama 35201-2371
(800) 324-9584 | induron.com